.100″ .100″ Latch/Ejector Header 4 Wall, Straight & Right Angle, High Temp Option Military (with 3M’s 3518 polarizing key) and centerbump polarization Optional ejector latches Mounting holes for securing header to board Solder tail and wrap tail options Optional polarizing posts High temperature option Date Modified: October 19, 1999 TS-0772-02 Sheet 1 of 4 19 Physical Insulation Material: Glass Filled Polyester (PBT) Glass Filled Polyester (PCT — High Temp Option) Flammability: UL 94V-0 Color: Gray, Standard Beige (High Temp Option) Marking: 3M Logo, Part Identification Number and Orientation Triangle Contact Material: Copper Alloy Plating Underplate: 100 µ″ [ 2.54 µm ] Nickel — QQ-N-290, Class 2 Wiping Area: Gold — MIL-G-45204, Type II, Grade C Solder Tails: 200 µ″ [ 5.08 µm ] 60/40 Tin Lead — MIL-P-81728 Wrap Tails: Gold Flash, Standard Electrical Current Rating: 1 A Insulation Resistance: >1 × 109 Ω at 500 Vdc Withstanding Voltage: 1000 Vrms at Sea Level Environmental Temperature Rating: –55°C to +105°C High Temp Process Rating: Maximum 235°C, with 90 seconds over 215°C UL File No.: E68080 3M Interconnect Solutions Division 6801 River Place Blvd. Austin, TX 78726-9000 For technical, sales or ordering information call 800-225-5373 .100″ .100″ Latch/Ejector Header 4 Wall, Straight & Right Angle, High Temp Option -X4XX Header with Ejector only -X6XX Header with Long Ejector/Latch for 3M Sockets with Strain Relief -X5XX Header with Short Ejector/Latch for 3M Sockets without Strain Relief -X0XX Header with No Ejector/Latch .08 [2.0] .08 [2.0] .424 ± .010 [ 10.77 ] .573 ± .010 [ 14.55 ] 1.07 Ref [27.2] .97 Ref [24.6] .37 Ref [9.4] 1.07 Ref [27.2] .46 Ref [11.7] .42 Ref [10.7] Note: This Ejector is a Nickel Plated Zinc Alloy Casting. .025 ± .002 Sq Typ [ 0.64 ] 2X .100 [2.54] (See Note 2) .24 [6.1] .28 [7.1] D .020 [0.51] .25 [6.4] .30 [7.6] .100 Ref [2.54] E ± .010 CL .34 [8.3] .100 Ref [2.54] .12 [3.0] Position 1 B “Y” F Typ Position 1 Orientation Triangle Section A–A (Straight) .025 ± .002 Sq Typ [ 0.64 ] .24 [6.1] F Typ CL .100 Ref [2.54] Notch C (See Table 1 & Note 1) .16 [4.1] A B .12 [3.0] .35 [8.9] .020 [0.51] E ± .010 .049 Ref [1.24] Notch B (See Table 1) .68 [17.3] .30 [7.6] “Y” .21 [5.3] Notch A (See Table 1 & Note1) A 2X .100 [2.54] (See Note 2) B C .197 [5.00] .20 [5.1] A Section B–B (Right Angle) TS-0772-02 Sheet 2 of 4 3M Interconnect Solutions Division 6801 River Place Blvd. Austin, TX 78726-9000 For technical, sales or ordering information call 800-225-5373 .100″ .100″ Latch/Ejector Header 4 Wall, Straight & Right Angle, High Temp Option Table 1 Dimensions Pin P n Quantity 3M Part Number A B C D Polarization Polar zat on Notches Provided 10 3793 1.26 [32.1] 1.105 [28.07] .865 [21.97] .71 [18.0] BC 14 3314 1.46 [37.2] 1.305 [33.15] 1.065 [27.05] .91 [23.1] BC 16 3408 1.56 [39.7] 1.405 [35.69] 1.165 [29.59] 1.01 [25.6] ABC 20 3428 1.76 [44.8] 1.605 [40.77] 1.365 [34.67] 1.21 [30.7] ABC 24 3627 1.96 [49.8] 1.805 [45.85] 1.565 [39.75] 1.41 [35.8] ABC 26 3429 2.06 [52.4] 1.905 [48.39] 1.665 [42.29] 1.51 [38.3] ABC 30 3440 2.26 [57.4] 2.105 [53.47] 1.865 [47.37] 1.71 43.43] ABC 34 3431 2.46 [62.6] 2.305 [58.55] 2.065 [52.45] 1.91 [48.5] ABC 40 3432 2.76 [70.2] 2.605 [66.17] 2.365 [60.07] 2.21 [56.1] ABC 50 3433 3.26 [82.9] 3.105 [78.87] 2.865 [72.77] 2.71 [68.8] ABC 60 3372 3.76 [95.6] 3.605 [91.57] 3.365 [85.47] 3.21 [81.5] ABC 64 3764 3.96 [100.7] 3.805 [96.65] 3.565 [90.55] 3.41 [86.6] ABC Table 2 Pin Cross Section 3M Part Number Suffix C t tT Contact Tail il Di Dimension i E -5XX2 -6XX2 Solder Tail for .062 [1.57] Thick PC Board -5X03 -6X03 -5X05 -6X05 Diagonals Corner Radii .112 [2.84] 0.0245 ± .0005 [0.622] 0.028 ± .001 [0.71] 0.0075 Ref [0.191] .035 ± .003 [0.89] (See Note 3) Solder Tail for .094 [2.39] to .125 [3.18] Thick PC Board .155 [3.94] 0.0245 ± .0005 [0.622] 0.028 ± .001 [0.71] 0.0075 Ref [0.191] .035 ± .003 [0.89] Wire Wrap Tail for up to 3 Levels of Wire Wrap .61 Ref [15.5] 0.0250 ± .002 [0.635] 0.035 ± .003 [0.90] 0.003 Max [0.08] .045 ± .003 [1.14] or .116 .106 [2.69] [2.95] .41 (See Note 2) [10.4] Max to Edge of PCB G Dia for Daisy Chain or .116 .106 [2.69] [2.95] (See Note 2) .300 [7.62] Side to Side Stackability “Y” G Dia ”Y” CL Position 1 .060 [1.52] CL Position 1 .029 [0.74] .100 ± .003 [2.54] .100 ± .003 [2.54] .352 [8.94] .100 ± .003 [2.54] Di Dimension i G Dimension F .100 ± .003 [2.54] .232 [5.89] C B Recommended Mounting Hole Pattern (Straight) Recommended Mounting Hole Pattern (Right Angle) Inch [mm] Notes: 1. Notches A & C will accomodate 3M Polarizing Keys (3M Part #N3518). 2. Accepts Rear and Front mounting hardware: Rear Entry: #4-24 thread cutting screw, 3M Part #3341-5, .116 [2.95] dia mounting hole Front Entry: (Prior to installation of latch on Straight Versions) #2-56 bolt and nut, 3M Part #3341-6, .106 [2.69] dia mounting hole 3. The recommended PCB hole size for the kinked tail positions on the .112 solder tail connector is .035 ± .002. Refer to TS-0972 for the positions kinked. Tolerance Unless Noted .0 Inch ± .1 .00 .000 ± .01 ± .005 [ ] Dimensions for Reference only TS-0772-02 Sheet 3 of 4 3M Interconnect Solutions Division 6801 River Place Blvd. Austin, TX 78726-9000 For technical, sales or ordering information call 800-225-5373 .100″ .100″ Latch/Ejector Header 4 Wall, Straight & Right Angle, High Temp Option Ordering Information 30 Microinches Gold Plated Product XXXXX-XXXX Product Material: N = High Temp Blank = Standard Tail 02 =Solder Tail for .062 [1.57] Thick Board K2=Kinked Solder Tails for .062 [1.57] Thick Board 03 =Solder Tails for .094 to .125 [2.39 to 3.18] Thick Board 05 = Wrap Posts for up to 3 levels of Wire Wrap (Not available on High Temp version.) 3M Part Number (See Table 1) Shroud and Pin Configuration 5 = 4 Wall, Right Angle 6 = 4 Wall, Straight Latch/Ejector System 0 = No Latch/Ejector 4 = Roll Pin Ejectors (3M Part # 3505-4) 5 = Short, Snap-In Latch/Ejectors, (3M Part # 3505-30) 6 = Long, Snap-In Latch/Ejectors (3M Part # 3505-31) 15 Microinches Gold Plated Product XXXXX-XXXXUG Plating Suffix UG = 15 microinch Gold Product Material: N = High Temp Blank = Standard 3M Part Number (See Table 1) Shroud and Pin Configuration 5 = 4 Wall, Right Angle 6 = 4 Wall, Straight Tail 02 =Solder Tail for .062 [1.57] Thick Board K2=Kinked Solder Tails for .062 [1.57] Thick Board 03 =Solder Tails for .094 to .125 [2.39 to 3.18] Thick Board Latch/Ejector System 0 = No Latch/Ejector 5 = Short, Snap In Latch/Ejectors (3M Part #3505-30) 6 = Long, Snap In Latch/Ejectors (3M Part #3505-31) TS-0772-02 Sheet 4 of 4 3M Interconnect Solutions Division 6801 River Place Blvd. Austin, TX 78726-9000 For technical, sales or ordering information call 800-225-5373