SaRonix Crystal Clock Oscillator 3.3 & 5V, HCMOS, TTL, SMD Technical Data S1800 / S1803 / S1850 Series Frequency Range: 1.5440 MHz to 80 MHz Frequency Stability: ±25, ±50, ±100 ppm over all conditions; calibration, tolerance, operating temperature, input voltage change, load change, aging (1 Year @ 25°C average ambient temperature), shock and vibration. Temperature Range: Operating: Storage: -10 to +70°C or -40 to +85°C -55 to +125°C Supply Voltage: +5.0V ±10%, 3.3V ±10% Supply Current: 1.544 to 32 MHz: 32+ to 50 MHz: 50+ to 80 MHz: 1.544 to 50 MHz (standby): 1.544 to 80 MHz (standby): ACTUAL SIZE Description The 5V S1800, S1850 and 3.3V S1803 are crystal-controlled, low-current oscillators providing precise rise and fall times to drive high speed CMOS and TTL loads. The sub-miniature, very low profile leadless ceramic packages have gold-plated contact pads, ideal for today's pick-and-place SMT environments. The S1850 is a high output load version available to 80 MHz. Applications & Features Symmetry: Rise & Fall Times: Logic 0: Logic 1: Load: Jitter: 10µA max 10µA max 45/55% max @ 50% VDD, 40/60% max @ 1.5V on S1800 & 1850 7ns max (10ns max: S1800) 20% to 80% VDD, 1.544 to 50 MHz 5ns max, 50+ to 80 MHz (S1803 & S1850 only) 10% VDD max 90% VDD min S1800/S1803: 15 pF max, 10 LSTTL S1850: 50 pF max 1.544 to 50 MHz, 10 TTL 30 pF max 50+ to 70 MHz, 10 TTL 20 pF max 70+ to 80 MHz (HCMOS), 10 TTL 8ps max RMS period jitter Shock: Solderability: Vibration: Solvent Resistance: Terminal Strength: Resistance to Soldering Heat: MIL-STD-883, MIL-STD-883, MIL-STD-883, MIL-STD-202, MIL-STD-883, MIL-STD-202, Method 2002, Condition B Method 2003 Method 2007, Condition A Method 215 Method 2004, Condition D Method 210, Condition I or J Environmental: Gross Leak Test: Fine Leak Test: Thermal Shock: Moisture Resistance: MIL-STD-883, MIL-STD-883, MIL-STD-883, MIL-STD-883, Method Method Method Method S 1803 C – 60.0000 (T) Temperature – °C Saronix (T) = Tape & Reel full reel increments only Reflow 240 max 4°C/sec max Cooling Preheat 183 ±10°C 150 4°C/sec max Time 1014, Condition C 1014, Condition A2 1011, Condition A 1004 Part Numbering Guide Solder Reflow Guide 200 S1850 27mA max 35mA max 75mA max Mechanical: • Sub-miniature, 1.1 mm high ceramic package ideal for SMT applications • 10µA max standby mode on S1800 and S1803 • Available as 3.3V and 5V versions • CMOS, HCMOS & TTL compatible • Perfect for PC's; notebook, palmtop computers; portable applications; PCMCIA cards;disc drives. Anywhere small size, low power, surface mountability are a priority • Available on tape & reel; 16mm tape, 1000pcs per reel 250 S1803 15mA max 18mA max 25mA max 10µA max on S1800 and S1803 only Standby Current: Output: S1800 25mA max 35mA max 1 – 2 minutes Series S1800 = 5.0V, 1.544 to 50 MHz, 15 pF, standby S1803 = 3.3V, 1.544 to 80 MHz, 15 pF, standby S1850 = 5.0V, 1.544 to 80 MHz, 50 pF high drive Frequency (MHz) Stability Tolerance A = ±25 ppm, -10 to +70°C B = ±50 ppm, -10 to +70°C C = ±100 ppm, -10 to +70°C E = ±50 ppm, -40 to +85°C F = ±100 ppm, -40 to +85°C 10 sec max DS-181 SaRonix REV F01 141 Jefferson Drive • Menlo Park, CA 94025 • USA • 650-470-7700 • 800-227-8974 • Fax 650-462-9894 SaRonix Crystal Clock Oscillator 3.3 & 5V, HCMOS, TTL, SMD Technical Data S1800 / S1803 / S1850 Series Tri-State Logic Table Test Circuit Pad 1 Input Pad 3 Output Logic 1 or NC Oscillation Logic 0 or GND High Impedance TEST POINT mA M Pad 3 Pad 4 VDD POWER SUPPLY Required Input Levels on Pad 1: Logic 1 = 2.2V min Logic 0 = 0.8V max VM OUT CL = S1800/S1803: 15 pF S1850: 50 pF to 50 MHz 30 pF, 50+ to 70 MHz 20 pF, 70+ to 80 MHz (Note A) OSCILLATOR 0.1µF GND Pad 1 Pad 2 Package Details 7.5 max .295 TRI-STATE INPUT Note A: CL includes probe and fixture capacitance 5.2 max .205 Output Waveform 1.15 max .043 1.4 .055 Pad 1 (Tri-State Control) 1.0 .039 Pad 2 (GND) Tr HCMOS Tf TTL Tr Tf V DD LOGIC 1 80% VDD 2.6 .102 1.1 .043 50% VDD 2.5 VDC 1.5 VDC 0.5 VDC 20% VDD 5.08 .200 Pad 4 (VDD ) LOGIC 0 Pad 3 (OUT) GND SYMMETRY SYMMETRY Marking Format* 5 = S1800 9 = S1803 B = S1850 SaRonix Stability Tolerance S 5 C YY WW Date Code Frequency *Exact location of items may vary Recommended Land Pattern ** 1.8 .071 4 3 4.2 .165 2.0 .079 1 2 5.08 .200 **External high frequency power supply decoupling required. All specifications are subject to change without notice. mm Scale: None (Dimensions in ) inches SaRonix DS-181 REV F01 141 Jefferson Drive • Menlo Park, CA 94025 • USA • 650-470-7700 • 800-227-8974 • Fax 650-462-9894