1 12 SA 5 x 20mm Super Quick-acting Fuses – High Breaking Capacity Built according to SEMKO 104-1976 FF Approvals: SEMKO approval 1.6A-6.3A 1,6 - 10 A File #8738128 1000 100 10 sand filled Fusing time in seconds ts 1 0,1 Time Current Characteristics n • In 1.2 • In 0,01 2 • In 2.75 • In 4 • In 10 • In rated current In 0,001 1 2 3 4 5 6 Vi lf hof rated d current N I Multiple In 1.6A – 10A min. min. max. min. max. min. max. max. 60min. 10ms 2s 4ms 50ms 2ms 15ms 2ms 8 10 Spool With pigtail leads Tape according to IEC 286-1 Rated current / rated voltage Series SA A / V~ 0034.0903 0034.0904 0034.0905 0034.0906 0034.0907 0034.0908 0034.0909 0034.0910 0034.0911 1.6 2 2.5 3.15 4 5 6.3 8 10 A / 250V A / 250V A / 250V A / 250V A / 250V A / 250V A / 250V A / 250V A / 250V Voltage drop at In A~ max. Schurter mV typical Schurter mV max. Schurter Watts typical Schurter Watts A2s 400 370 340 310 280 250 250 250 250 250 200 200 180 180 160 170 190 160 1.0 1.1 1.3 1.5 1.7 1.9 2.3 3.0 3.7 0.6 0.6 0.8 1.0 1.2 1.4 2.0 2.8 2.9 1.8 4.2 6.6 8.2 19 20 23 32 43 1500A at 250 V, 50 Hz p.f. 0.7 - 0.8 Power dissipation at 1.2 • In Operating I 2 t Breaking capacity Approvals 123 123 s 123 SEMKO Order Numbers • • • • • • • For protection of semiconductors, ask for special catalog (reference super quick-acting fuse series D GLD II / III 0034.1101 - .1115, 2A-6A/500V) For pigtail fuses packaged loose: reference .PT after part number (e.g. 0034.0903.PT) For pigtail fuses on 1,000-piece tape and reel: reference .TR after part number (e.g. 0034.0903.TR) 144 Schurter, Inc. • Phone 707-778-6311 • Fax 707-778-6401 • E-mail [email protected] • Website http://www.schurterinc.com SP 5 x 20mm Quick-acting Fuses – High Breaking Capacity Built according to IEC 127-2/1, EN 60127, SEV 1064, DIN/VDE 0820 part 1, DIN 41660, BS 4265, and SEMKO 104-1976. Recommended if the short circuit current through the fuse-link is more than 35A or 10 x I n , whichever is greater (CENELEC Jan 1, 1993). F 500 mA - 3,15 A 4 - 16 A 1000 100 10 sand filled Approvals: UL recognition 500mA-16A* File #E41599 CSA acceptance 500mA-16A* File #LR51172 VDE approval 500mA-6.3A File #51959 SEMKO approval 500mA-6.3A File numbers SEV approval 500mA-6.3A on request CB certified 800mA-1.6A, 2.5A, 5A * fuses with pigtail leads approved up to 8A 1 s Time Current Characteristics Fusing time in seconds ts 0,1 n • In 1.5 • In 2.1 • In 2.75 • In 4 • In 10 • In rated current In 0,01 min. 500mA – 16A 0,001 1 2 3 4 5 6 Multiple current In Vi lf hof rated d N I max. 60 min. 30 min. min. max. min. max. max. 10 ms 2 s* 3 ms 300ms 20 ms * 1.25A – 16A max. 3 s 8 10 Spool With pigtail leads Tape according to IEC 286-1 max. IEC 127 mV typical Schurter mV max. IEC 127 Watts typical Schurter Watts 1800 1500 1200 1000 800 600 500 400 350 300 250 200 830 800 580 600 270 350 260 260 210 200 160 150 140 130 110 120 2.5 2.5 2.5 2.5 4 4 4 4 4 4 4 4 2.4 2.4 2.4 2.5 1.0 1.6 1.6 1.9 1.9 2.4 2.4 3.2 3.9 4.7 6.9 7.4 UL: 10,000A / 125 V, p.f. 0.7 - 0.8 IEC / UL: 1,500A / 250 V, p.f. 0.7 - 0.8 1,000A / 125V, p.f. 1.0 A2 s 0.08 0.22 0.47 0.84 0.92 0.94 2.7 4.0 8.3 14 37 42 100 167 286 504 Approvals • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • CB A~ ac Operating I2t SEV Power dissipation at 1.5 • In SEMKO Voltage drop at In VDE mA / A / V~ 500 mA / 250V 630 mA / 250V 800 mA / 250V 1 A / 250V 1.25 A / 250V 1.6 A / 250V 2 A / 250V 2.5 A / 250V 3.15 A / 250V 4 A / 250V 5 A / 250V 6.3 A / 250V 8 A* / 250V 10 A* / 250V 12.5 A* / 250V 16 A* / 250V Breaking capacity CSA Series SP 0001.1001 0001.1002 0001.1003 0001.1004 0001.1005 0001.1006 0001.1007 0001.1008 0001.1009 0001.1010 0001.1011 0001.1012 0001.1013 0001.1014 0001.1015 0001.1016 Rated current / rated voltage UL Order Numbers • • • • • • 500A / 125V, p.f. 0.7 - 0.8 * Not addressed in the standards For pigtail fuses packaged loose: reference .PT after part number (e.g. 0001.1001.PT) For pigtail fuses on 1,000-piece tape and reel: reference .TR after part number (e.g. 0001.1001.TR) Schurter, Inc. • Phone 707-778-6311 • Fax 707-778-6401 • E-mail [email protected] • Website http://www.schurterinc.com 145 FSM 5 x 20mm Medium Time Lag Fuses – Low and Medium Breaking Capacity Built according to DIN 41571, data sheet 2 (June 1984) M 1,6 - 10 A 315 mA - 1,25 A 1000 Glass tube 0034.2511 – .2517 100 Ceramic tube Sand filled 10 0034.2518 – .2527 Fuse with pigtail leads 1 s Time Current Characteristics n • In Fusing time in seconds ts 0,1 1.5 • In 2.1 • In 4 • In 10 • In min. max. min. max. min. max. 315mA – 1.25A 60 min. 10 min. 40 ms 2s 5 ms 90 ms 1.6A – 10A 60 min. 30 min. 40 ms 2s 5 ms 90 ms rated current In 0,01 0,001 1 Vi lf h 2 d 3 N Multiple of rated current In 4 5 6 t I 8 10 15 Spool With pigtail leads Tape according to IEC 286-1 Order Numbers Rated current / rated voltage Breaking capacity Voltage drop at In Power dissipation at 1.5 • In Operating I 2 t Series FSM mA /A / V~ C, E, D p.f. 1 G p.f. 0.7-0.8 A~ max. DIN 41571 mV typical Schurter mV max. Schurter Watts typical Schurter Watts A 2s 0034.2511 0034.2512 0034.2513 0034.2514 0034.2515 0034.2516 0034.2517 0034.2518 0034.2519 0034.2520 0034.2521 0034.2522 0034.2523 0034.2524 0034.2525 0034.2526 315 mA / 250V 400 mA / 250V 500 mA / 250V 630 mA / 250V 800 mA / 250V 1 A / 250V 1.25 A / 250V 1.6 A / 250V 2 A / 250V 2.5 A / 250V 3.15 A / 250V 4 A / 250V 5 A / 250V 6.3 A / 250V 8 A / 250V 10 A / 250V 250 230 210 190 170 160 160 160 160 160 160 160 150 140 140 120 200 160 140 140 130 70 70 150 140 130 120 120 100 100 90 80 0.4 0.4 0.4 0.4 0.4 0.4 0.6 0.8 0.9 1.0 1.2 1.5 1.7 2.0 2.6 2.8 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.6 0.7 0.8 1.0 1.3 1.4 1.7 2.3 2.3 0.33 0.41 1.5 12 11 15 23 3.5 5.0 13 21 37 95 165 240 455 0034.2527 10 120 80 2.8 2.5 255 A* / 250V 80A / 125V80A / 250V~ C C 1000A / 125V- E E 1000A / 250V~ E E 300A / 125V300A / 250V~ D D 1500A / 250V~ G G *Not mentioned in DIN 41571. Check temperature rise if fuses are used in closed type fuseholders. For pigtail fuses packaged loose: reference .PT after part number (e.g. 0034.2511.PT) For pigtail fuses on 1,000-piece tape and reel: reference .TR after part number (e.g. 0034.2511.TR) Schurter, Inc. • Phone 707-778-6311 • Fax 707-778-6401 • E-mail [email protected] • Website http://www.schurterinc.com 147 SPT 5 x 20mm Time Lag Fuses – High Breaking Capacity Built according to IEC 127-2/5, EN 60127, SEV 1064, and SEMKO 104-1976. Recommended if the short circuit current through the fuse-link is more than 35A or 10 x I n , whichever is greater (CENELEC Jan 1, 1993). T Approvals: UL recognition 500mA-16A* File #E41599 CSA acceptance 500mA-16A* File #LR51172 VDE approval 1A-6.3A File #75036 File SEMKO approval 1A-6.3A numbers SEV approval 1A-6.3A on request * fuses with pigtail leads approved up to 8A (factory assembled only) 1 - 3,15 A 4 - 6,3 A 1000 Ceramic or glass tube Sand filled 100 10 NEW New version with gold plated caps for direct pcb mounting 1 cUL recognition 1A-16A/250V** pending VDE approval 1A-6.3A/250V** pending **Contact Schurter for part numbers Time Current Characteristics Fusing time in seconds ts 0,1 n • In 1.5 • In 2.1 • In 2.75 • In min. max. min. max. 4 • In 10 • In rated current In 0,01 0,001 1 2 3 4 5 6 8 10 min. max . min. max. SCHURTER IEC 500mA – 800mA 1A – 3.15A 60 min. 30 min. 1s 80 s 95 ms 5s 10 ms 100 ms IEC SCHURTER 4A – 6.3A 8A – 16A 60 min. 30 min. 1s 80 s 150 ms 5s 20 ms 100 ms Multiple of rated current In With pigtail leads Spool Tape according to IEC 286-1 0001.2513 0001.2514 8 10 A*/ 250V A*/ 250V UL:1,000A / 250V, p.f. 1 70 70 0001.2515 0001.2516 12.5 16 A*/ 250V A*/ 250V UL:1,000A / 125V & 500A/250V, p.f. 1 70 70 UL: 10,000A / 125V, p.f. 0.7-0.8 IEC: 1,500A / 250V, p.f. 0.7-0.8 2.5 2.5 2.5 2.5 2.5 4.0 4.0 4.0 4.0 Pre-arcing I 2t at 10 • ln Approvals 0.7 0.7 0.7 0.8 0.9 1.1 1.2 1.5 1.7 typical Schurter Watts 0.5 0.5 0.5 0.5 0.5 0.5 0.6 0.6 0.8 0.9 1.2 1.2 A 2s 0.50 1.55 2.30 1.10 1.86 4.35 9.20 11.7 33.7 62.4 97.5 171 • • • • • • • • • • • • • • • • • • • • • • • • 1.9 2.8 1.3 2.1 268 400 • • • • 3.1 4.0 563 1272 • • • • SEV mA / A / V~ 500 mA*/ 250V 630 mA*/ 250V 800 mA*/ 250V 1 A / 250V 1.25 A / 250V 1.6 A / 250V 2 A / 250V 2.5 A / 250V 3.15 A / 250V 4 A / 250V 5 A / 250V 6.3 A / 250V Power dissipation at 1.5 • In max. max. IEC 127 Schurter Watts Watts SEMKO Series SPT 0001.2501 0001.2502 0001.2503 0001.2504 0001.2505 0001.2506 0001.2507 0001.2508 0001.2509 0001.2510 0001.2511 0001.2512 A~ ac Voltage drop at In max. typical Schurter IEC 127 mV mV 360 330 260 250 180 250 150 200 130 190 120 180 100 140 100 100 90 100 90 100 70 VDE Breaking capacity CSA Rated current / rated voltage UL Order Numbers • • • • • • • • • • • • • • • • • • • • • • • • • • • *Not addressed in the standards For pigtail fuses packaged loose: reference .PT after part number (e.g. 0001.2501.PT) For pigtail fuses on 1,000-piece tape and reel: reference .TR after part number (e.g. 0001.2501.TR) 148 Schurter, Inc. • Phone 707-778-6311 • Fax 707-778-6401 • E-mail [email protected] • Website http://www.schurterinc.com