C&K SD Series Low Profile DIP Switches Typical Applications • Address switch for industrial controls • Logic switching for computers and peripherals • Function controlling for numerous applications I DIP Features/Benefits • Low profile design saves space • Thru-hole and surface mount models • Tape and reel packaging available • Sealed with top tape • RoHS compliant - options available How To Order Complete part numbers for SD Series are shown on pages I–9 through I–11. All switches supplied in “OFF” position in rigid dispensing tubes or tape and reel packaging. PACKAGING: Thru-hole switches supplied in rigid dispensing tubes in full-tube quantities only: this may effect order quantity. Surface mount switches available in tape and reel packaging by added ‘R’ to end of part number; 1,000 pieces per reel. Switch position 1 denotes pin number 1. All switch actuators in ‘OFF’ position, Specifications SWITCH FUNCTION: SPST - 2, 3, 4, 5, 6, 7, 8, 9, 10 & 12 positions CONTACT RATING: standard. Carry: 100 mA @ 50 V DC max. Switch: 0.1 mA @ 5 V DC min to 100 mA @ 25 V DC max. MECHANICAL AND ELECTRICAL LIFE: 2,000 make-and-break cycles at full load, each circuit. CONTACT RESISTANCE: Below 50 milliohms typ. initial Materials CASE & COVER: Thru-hole: polyester (PBT). Surface mount: (PPA), flame retardant (UL 94V-0). ACTUATOR: Nylon, flame retardant (UL 94V-0) @ 2-4 V DC, 100mA. CONTACTS: Copper alloy with gold plate. INSULATION RESISTANCE: 109 ohms min. TERMINALS: DIELECTRIC STRENGTH: 500 V RMS min. @ sea level between adjacent terminals. Non-RoHS (K or KR ending part #’s) = Copper alloy with tin/lead plate. STORAGE TEMPERATURE: -40°C to 85°C. TERMINAL SEAL: All terminals insert molded. OPERATING TEMPERATURE: -20°C to 85°C. TAPE SEAL: Polyester RoHS version (B or BR ending part #’s) = bright tin-plated BeCu. OPERATING FORCE: 100-700g inital. NOTE: For the latest information regarding RoHS compliance, please go to: www.ittcannon.com/rohs. Note: Specifications and materials listed above are for switches with standard options. For information on specific and custom switches, consult Customer Service Center. Sealed Flush Actuator – With Top Tape, Thru-hole Terminals Process sealed - withstands soldering and cleaning processes DIM. 'A' SEE CHART .263 (6,68) 1 2 3 4 5 6 .027 (0,70) ACTUATOR TRAVEL 7 8 ORIENTATION MARK PEELABLE TAPE SEAL .023 TYP. (0,60) STANDOFF .059 TYP. (1,50) .142 (3,62) .168 TYP. (4,30) .300 TYP. (7,6) Ø.038 (0,97) TYP. .100 (2,54) TYP. .315 TYP. (8,00) ROHS PART NUMBER SD02H0B SD03H0B SD04H0B SD05H0B SD06H0B SD07H0B SD08H0B SD09H0B SD10H0B SD12H0B TIN LEAD PART NUMBER NO. POS. DIM. ‘A’ QUANTITY PER TUBE SD02H0K SD03H0K SD04H0K SD05H0K SD06H0K SD07H0K SD08H0K SD09H0K SD10H0K SD12H0K 2 .258 (6,55) 85 3 .358 (9,09) 60 4 .458 (11,63) 45 5 .558 (14,17) 40 6 .658 (16,71) 30 7 .758 (19,25 25 8 .858 (21,79) 25 9 .958 (24,33) 20 10 1.058 (26,87) 20 12 1.258 (31,95) 15 Schematic .022 TYP. (0,55) .126 TYP. (3,20) .100 TYP. (2,54) .010 TYP. (0,25) .325 TYP. (8,25) SPST Dimensions are shown: Inch (mm ) Specifications and dimensions subject to change I-9 www.ittcannon.com C&K SD Series Low Profile DIP Switches Sealed Flush Actuator – With Top Tape, Surface Mount Terminals DIP I RoHS PART NUMBER TIN LEAD PART NUMBER NO. POS. DIM. ‘A’ QUANTITY PER TUBE SD02H0SB SD03H0SB SD04H0SB SD05H0SB SD06H0SB SD07H0SB SD08H0SB SD09H0SB SD10H0SB SD12H0SB SD02H0SK SD03H0SK SD04H0SK SD05H0SK SD06H0SK SD07H0SK SD08H0SK SD09H0SK SD10H0SK SD12H0SK 2 .258 (6,55) 85 3 .358 (9,09) 60 4 .458 (11,63) 45 5 .558 (14,17) 40 6 .658 (16,71) 30 7 .758 (19,25 25 8 .858 (21,79) 25 9 .958 (24,33) 20 10 1.058 (26,87) 20 12 1.258 (31,95) 15 .027 (0,70) ACTUATOR TRAVEL DIM. 'A' SEE CHART .263 (6,68) 1 2 3 4 5 6 7 8 .142 (3,62) ORIENTATION MARK Schematic .010 TYP. (0,25) STANDOFF SPST .100 (2,54) TYP. .315 TYP. (8,00) .010 TYP. (0,25) .300 (7,62) .100 TYP. (2,54) .022 TYP. (0,55) .435 MIN. (11,05) .044 MIN. (1,12) .160 (4,06) WITH TAPE PEELABLE TAPE SEAL .243 TYP. (6,17) .390 (9,91) Sealed Extended Actuator – With Top Tape, Thru-hole Terminals RoHS PART NUMBER SD02H1B SD03H1B SD04H1B SD05H1B SD06H1B SD07H1B SD08H1B SD09H1B SD10H1B SD12H1B TIN LEAD PART NUMBER NO. POS. SD02H1K SD03H1K SD04H1K SD05H1K SD06H1K SD07H1K SD08H1K SD09H1K SD10H1K SD12H1K 2 .258 (6,55) 85 3 .358 (9,09) 60 4 .458 (11,63) 45 5 .558 (14,17) 40 DIM. ‘A’ 6 .658 (16,71) 30 7 .758 (19,25 25 8 .858 (21,79) 25 9 .958 (24,33) 20 10 1.058 (26,87) 20 12 1.258 (31,95) 15 Schematic .027 (0,70) ACTUATOR TRAVEL DIM. 'A' SEE CHART QUANTITY PER TUBE .263 (6,68) 1 2 3 4 5 6 7 8 .142 (3,62) ORIENTATION MARK .010 TYP. (0,25) PEELABLE TAPE SEAL .059 TYP. (1,50) .315 TYP. (8,00) .126 TYP. (3,20) .100 TYP. (2,54) .022 TYP. (0,55) SPST .100 (2,54) TYP. .168 TYP. (4,30) .023 TYP. (0,60) STANDOFF .300 TYP. (7,6) Ø.038 (0,97) TYP. .010 TYP. (0,25) .325 TYP. (8,25) Sealed Extended Actuator – With Top Tape, Surface Mount Terminals RoHS PART NUMBER TIN LEAD PART NUMBER NO. POS. SD02H1SB SD03H1SB SD04H1SB SD05H1SB SD06H1SB SD07H1SB SD08H1SB SD09H1SB SD10H1SB SD12H1SB SD02H1SK SD03H1SK SD04H1SK SD05H1SK SD06H1SK SD07H1SK SD08H1SK SD09H1SK SD10H1SK SD12H1SK 2 .258 (6,55) 85 3 .358 (9,09) 60 4 .458 (11,63) 45 5 .558 (14,17) 40 6 .658 (16,71) 30 7 .758 (19,25 25 8 .858 (21,79) 25 9 .958 (24,33) 20 10 1.058 (26,87) 20 12 1.258 (31,95) 15 Schematic DIM. ‘A’ .027 (0,70) ACTUATOR .243 TYP. TRAVEL (6,17) DIM. 'A' SEE CHART QUANTITY PER TUBE .263 (6,68) 1 .010 TYP. (0,25) .010 TYP. (0,25) STANDOFF SPST 2 3 4 5 6 7 ORIENTATION MARK PEELABLE TAPE SEAL .022 TYP. (0,55) 8 .142 (3,62) .160 (4,06) WITH TAPE .100 TYP. (2,54) .435 MIN. (11,05) .044 MIN. (1,12) .100 (2,54) TYP. .315 TYP. (8,00) .010 TYP. (0,25) .300 (7,62) .390 (9,91) Dimensions are shown: Inch (mm ) Specifications and dimensions subject to change I-10 www.ittcannon.com C&K SD Series Low Profile DIP Switches TAPE & REEL PACKAGING – SURFACE MOUNT OPTIONS ONLY I SD02H0SBR SD03H0SBR SD04H0SBR SD05H0SBR SD06H0SBR SD07H0SBR SD08H0SBR SD09H0SBR SD10H0SBR SD12H0SBR TIN LEAD PART NUMBER NO. POS. DIM. ‘A’ QUANTITY PER REEL SD02H0SKR SD03H0SKR SD04H0SKR SD05H0SKR SD06H0SKR SD07H0SKR SD08H0SKR SD09H0SKR SD10H0SKR SD12H0SKR 2 .258 (6,55) 100 3 .358 (9,09) 100 4 .458 (11,63) 100 5 .558 (14,17) 100 6 .658 (16,71) 100 7 .758 (19,25 100 8 .858 (21,79) 100 9 .958 (24,33) 100 10 1.058 (26,87) 100 12 1.258 (31,95) 100 Schematic SPST Reel Information Outside diameter Pilot hole 13.00 (333,0) .512 (13,0) Dimensions are shown: Inch (mm ) Specifications and dimensions subject to change I-11 www.ittcannon.com DIP RoHS PART NUMBER