SENSITRON SEMICONDUCTOR SHD119234 SHD119234P TECHNICAL DATA DATA SHEET 779, REV. B HERMETIC POWER SCHOTTKY RECTIFIER Ultra Low Reverse Leakage 200 C Operating Temperature Applications: Switching Power Supply Converters Free-Wheeling Diodes Polarity Protection Diode Features: Ultra low Reverse Leakage Current Soft Reverse Recovery at Low and High Temperature Very Low Forward Voltage Drop Low Power Loss, High Efficiency High Surge Capacity Guard Ring for Enhanced Durability and Long Term Reliability Guaranteed Reverse Avalanche Characteristics Out Performs 100 Volt Ultrafast Rectifiers Maximum Ratings: Characteristics Peak Inverse Voltage Max. Average Forward Current Max. Average Forward Current Max. Peak One Cycle NonRepetitive Surge Current Max. Thermal Resistance Max. Junction Temperature Max. Storage Temperature Symbol VRWM IF(AV) IF(AV) IFSM R JC TJ Tstg Condition 50% duty cycle, rectangular wave form (Single) 50% duty cycle, rectangular wave form (Common Cathode) 8.3 ms, half Sine wave (per leg) (Single) - Max. 100 15 Units V A 30 A 200 A 2.65 -65 to +200 -65 to +175 C/W C C Max. 0.93 Units V 0.77 V .1 mA 1.0 mA 500 pF Electrical Characteristics: Characteristics Max. Forward Voltage Drop Symbol VF1 VF2 Max. Reverse Current IR1 IR2 Max. Junction Capacitance CT Condition @ 15A, Pulse, TJ = 25 C (per leg) @ 15A, Pulse, TJ = 125 C (per leg) @VR = 100V, Pulse, TJ = 25 C (per leg) @VR = 100V, Pulse, TJ = 125 C (per leg) @VR = 5V, TC = 25 C fSIG = 1MHz, VSIG = 50mV (p-p) (per leg) 2000 Sensitron Semiconductor 221 West Industry Court Deer Park, NY 11729-4681 PHONE (631) 586-7600 FAX (631) 242-9798 www.sensitron.com [email protected] SHD119234 SHD119234P SENSITRON TECHNICAL DATA DATA SHEET 779, REV. B MECHANICAL DIMENSIONS: IN Inches / mm SINGLE COMMON CATHODE .145 (3.68) 1 .037 (.94) .030 (.76) Min. .375 (9.53) 1 2 3 2 1 3 .050 (1.27) 2 .140 (3.56)Typ. .035 (.89) Min. .450 (11.43) 3 .415 (10.54) .157 (3.99) LCC-3P .625 (15.88) PINOUT TABLE DEVICE TYPE PIN 1 PIN 2 SINGLE RECTIFIER CATHODE ANODE COMMON CATHODE COMMON CATHODE ANODE 1 Note: The Vf curves shown are for the SD125SCU100 unpackaged die only. Typical Forward Characteristics Typical Reverse Characteristics 200 °C 200 °C 175 °C 100 175 °C 100 150 °C 125 °C 10-1 100 °C -2 75 °C 10 50 °C 10-3 25 °C 10-4 125 °C 0 20 40 60 80 100 Reverse Voltage - RV (V) 120 Typical Junction Capacitance 25 °C 10-1 Junction Capacitance - C T (pF) Instantaneous Forward Current - I F (A) Instantaneous Reverse Current - I R (mA) 101 101 PIN 3 ANODE ANODE 2 10-2 0.1 0.2 0.3 0.4 0.5 0.6 0.7 Forward Voltage Drop -FV(V) 0.8 400 300 200 100 0 20 40 60 80 100 Reverse Voltage - RV (V) 120 2000 Sensitron Semiconductor 221 West Industry Court Deer Park, NY 11729-4681 PHONE (631) 586-7600 FAX (631) 242-9798 www.sensitron.com [email protected] SHD119234 SHD119234P SENSITRON TECHNICAL DATA DATA SHEET 779, REV. B DISCLAIMER: 1- The information given herein, including the specifications and dimensions, is subject to change without prior notice to improve product characteristics. Before ordering, purchasers are advised to contact the Sensitron Semiconductor sales department for the latest version of the datasheet(s). 2- In cases where extremely high reliability is required (such as use in nuclear power control, aerospace and aviation, traffic equipment, medical equipment , and safety equipment) , safety should be ensured by using semiconductor devices that feature assured safety or by means of users’ fail-safe precautions or other arrangement . 3- In no event shall Sensitron Semiconductor be liable for any damages that may result from an accident or any other cause during operation of the user’s units according to the datasheet(s). Sensitron Semiconductor assumes no responsibility for any intellectual property claims or any other problems that may result from applications of information, products or circuits described in the datasheets. 4- In no event shall Sensitron Semiconductor be liable for any failure in a semiconductor device or any secondary damage resulting from use at a value exceeding the absolute maximum rating. 5- No license is granted by the datasheet(s) under any patents or other rights of any third party or Sensitron Semiconductor. 6- The datasheet(s) may not be reproduced or duplicated, in any form, in whole or part, without the expressed written permission of Sensitron Semiconductor. 7- The products (technologies) described in the datasheet(s) are not to be provided to any party whose purpose in their application will hinder maintenance of international peace and safety nor are they to be applied to that purpose by their direct purchasers or any third party. When exporting these products (technologies), the necessary procedures are to be taken in accordance with related laws and regulations. 2000 Sensitron Semiconductor 221 West Industry Court Deer Park, NY 11729-4681 PHONE (631) 586-7600 FAX (631) 242-9798 www.sensitron.com [email protected]