KODENSHI SI5314-H

SI5314-H / SI5314-H(B)
IRED
Features
• Colorless transparency lens type
• φ5mm(T-13/4) all plastic mold type
• Low power consumption
• High radiant intensity
Applications
• Light source for remote control devices
(This device should be only used at non- repetitive pulse mode)
Outline Dimensions
unit : mm
STRAIGHT TYPE
STOPPER
4.80~5.20
4.80~5.20
8.40~8.80
1.00 Max.
0.05 Typ.
TYPE : (B)
8.40~8.80
1.00 Max.
0.05 Typ.
1.20 Min.
1.27 Typ.
2.90~3.90
0.60 Max.
26.00 Min.
0.60 Max.
26.00 Min.
1.00 Min.
1.00 Min.
2.54 Typ.
1
2
5.60~6.60
0.55 Max.
0.55 Max.
2.54 Typ.
1
2
5.60~6.60
PIN Connections
1. Anode
2. Cathode
KSD-O2R001-002
1
SI5314-H / SI5314-H(B)
Absolute Maximum Ratings
Characteristic
(Ta=25℃)
Symbol
Rating
Unit
PD
145
mW
1
Power dissipation
IF
100
mA
2
IFP
1
A
Reverse voltage
VR
4
V
Operating temperature range
Topr
-25∼85
℃
Storage temperature range
Tstg
-30∼100
℃
* Forward current
* Peak forward current
3
* Soldering temperature
Tsol
260℃ for 10 seconds
*1. Avoid operating under continuous bias
*2.Duty ratio = 1/100, Pulse width = 0.1ms
*3.Keep the distance more than 2.0mm from PCB to the bottom of IRED package
Electrical / Optical Characteristics
Characteristic
(Ta=25℃)
Symbol
Test Condition
Min.
Typ.
Max.
Unit
Forward voltage
VF
IF= 50mA
-
1.3
1.45
V
Radiant intensity
IE
IF= 50mA
20
35
-
mW/Sr
Peak wavelength
λP
Δλ
IR
IF= 50mA
-
950
-
nm
IF= 50mA
-
50
-
nm
VR=4V
-
-
10
uA
θ1/2
IF= 50mA
-
±25
-
deg
Spectrum bandwidth
Reverse current
4
* Half angle
*4. 1) θ1/2 is the off-axis angle where the luminous intensity is 1/2 the peak intensity
2) Half angle(θ1/2) is ±30 Degrees in transmitter
KSD-O2R001-002
2
SI5314-H / SI5314-H(B)
Characteristic Diagrams
Fig. 1 IF-VF
Forward Current IF [mA]
Radiant Intensity IE [mW/Sr]
Fig. 2 IE - IF
Forward
Forward Voltage VF [V]
Current IF [mA]
Fig.4 Spectrum Distribution
Fig.4 Spectrum Distribution
Forward
Relative Intensity [%]
Current IF [mA]
Fig. 3 IF – Ta
Wavelength λ [nm]
Ambient Temperature Ta [℃]
Fig. 5 Radiation Diagram
Relative Radiant Intensity IE [%]
KSD-O2R001-002
3
SI5314-H / SI5314-H(B)
The AUK Corp. products are intended for the use as components in general electronic
equipment (Office and communication equipment, measuring equipment, home
appliance, etc.).
Please make sure that you consult with us before you use these AUK Corp. products
in equipments which require high quality and / or reliability, and in equipments which
could have major impact to the welfare of human life(atomic energy control, airplane,
spaceship, transportation, combustion control, all types of safety device, etc.). AUK
Corp. cannot accept liability to any damage which may occur in case these AUK Corp.
products were used in the mentioned equipments without prior consultation with AUK
Corp..
Specifications mentioned in this publication are subject to change without notice.
KSD-O2R001-002
4