CRYSTAL CLOCK OSCILLATORS Data Sheet 0012K Rev. H TTL SJ-160 Series Description The SJ-160 Series of quartz crystal oscillators are designed to survive standard wave soldering operations without damage. Features • Wide frequency range–2.25MHz to 85.0MHz • User specified tolerance available • Will withstand vapor phase temperatures of 253°C for 4 minutes maximum • Space-saving alternative to discrete component oscillators • High shock resistance, to 3000g • Metal lid electrically connected to ground to reduce EMI • Low Jitter • High Q Crystal actively tuned oscillator circuit • Power supply decoupling internal • No internal PLL avoids cascading PLL problems • High frequencies due to proprietary design • Gold plated leads • Low power consumption • RoHS Compliant, Lead Free Construction Electrical Connection Pin 1 2 3 4 Connection N.C. Grd & Case Output VCC 357 Beloit Street, P.O. Box 457, Burlington, WI 53105-0457 U.S.A. Phone 262/763-3591 FAX 262/763-2881 Email: [email protected] www.nelfc.com Data Sheet 0012K CRYSTAL CLOCK OSCILLATORS Rev. H Continued SJ-160 Series TTL Operating Conditions and Output Characteristics Electrical Characteristics Parameter Frequency Duty Cycle Logic 0 Logic 1 Rise & Fall Time Symbol --------VOL VOH tr,tf Jitter, RMS(2) ----- Frequency Stability (1) dF/F Conditions ----@ VCC/2 @ 16mA @ 0.4mA @ 0.4 to 2.4V <40MHz 40MHz or greater <40MHz OT & >40MHz <40MHz Fund Overall conditions including: voltage, calibration, temp., 10 yr aging, shock, vibration Min 2.25MHz 40/60% ----2.4V Typical ----------------- Max 85.0MHz 60/40% 0.4V ----- -----------------100ppm --------------------- 8.0 ns 5.0 ns 5 psec 8 psec +100ppm Min 4.75V 0.0 mA 0.0 mA 0°C -55°C --------------------- Typical 5.0V ------------------------------------- Max 5.25V 50 mA ±16.0 mA 70°C 125°C 263 mW 300°C 10 TTL gate 2 ms 10 ms General Characteristics Parameter Supply Voltage Supply Current Output current Operating temperature Storage temperature Power Dissipation Lead temperature Load Start-up Time Symbol VCC ICC IO TA TS PD TL ----ts Conditions ----No Load ----------------Soldering, 10 sec. ----<20MHz 20MHz or greater Environmental and Mechanical Characteristics Mechanical Shock Thermal Shock Vibration Soldering Condition Hermetic Seal Per MIL-STD-202, Method 213, Condition E Per MIL-STD-833, Method 1011, Condition A 0.060" double amplitude 10 Hz to 55 Hz, 35g’s 55Hz to 2000 Hz 300°C for 10 seconds Leak rate less than 1 x 10-8 atm.cc/sec of helium Footnotes: 1) Standard frequency stability (±20,±25,±50ppm & others available) 2) Jitter performance is frequency dependent. Please contact factory for full characterization. RMS jitter bandwidth of 12kHz to 20MHz. Test Load: Creating a Part Number SJ - X16X - FREQ Package Code SJ 4 J Lead SMD Input Voltage Code Specification A 3.3V 5V Tolerance/Performance 0 ±100ppm 0-70°C 1 ±50ppm 0-70°C 7 ±25ppm 0-70°C 9 Customer Specific A ±20ppm 0-70°C B ±50ppm -40 to +85°C C ±100ppm -40 to +85°C 357 Beloit Street, P.O. Box 457, Burlington, WI 53105-0457 U.S.A. Phone 262/763-3591 FAX 262/763-2881 Email: [email protected] www.nelfc.com