A11 / SMA11 Cascadable Amplifier 5 to 1000 MHz Rev. V2 Features Product Image • LOW NOISE: 3.1 dB (TYP.) • LOW VSWR: 1.3:1 (TYP.) • FLAT BANDWIDTH: <±0.25 dB (TYP.) Description The A11 RF amplifier is a discrete hybrid design, which uses thin film manufacturing processes for accurate performance and high reliability. This single stage bipolar transistor feedback amplifier design displays impressive performance over a broadband frequency range. Both TO-8 and Surface Mount packages are Hermetically sealed, and MIL-STD-883 environmental screening is available. Ordering Information Part Number Package A11 TO-8 MAAM-008715-0SMA11 Surface Mount MAAM-008715-00CA11 SMA Connectorized ** ** The connectorized version is not RoHs compliant. Electrical Specifications: Z0 = 50Ω, VCC = +15 VDC Typical Parameter Frequency Absolute Maximum Ratings Guaranteed Parameter Absolute Maximum Units MHz 25ºC 0º to 50ºC -54º to +85ºC* Storage Temperature -62ºC to +125ºC 1-1100 5-1000 5-1000 Case Temperature +125ºC DC Voltage +20 V Continuous Input Power +13 dBm Short Term Input power (1 minute max.) 50 mW Small Signal Gain (min) dB 14.7 14.0 13.5 Gain Flatness (max) dB ±0.3 ±1.0 ±1.2 Reverse Isolation dB 20 Noise Figure (max) dB 3.1 3.5 4.0 Peak Power (3 µsec max.) 0.5 W Power Output @ 1 dB comp. (min) dBm -2.0 -3.0 -4.0 “S” Series Burn-In Temperature (case) +125ºC IP3 dBm +10 IP2 dBm +10 Parameter Rating Second Order Harmonic IP dBm +15 Thermal Resistance θjc 45ºC/W VSWR Input / Output (max) DC Current @ 15 Volts (max) mA Thermal Data: VCC = +15 VDC 1.3:1 / 1.3:1 1.8:1 / 1.8:1 2.0:1 / 2.0:1 Transistor Power Dissipation Pd 0.048 W 9 11 12 Junction Temperature Rise Above Case Tjc +2ºC * Over temperature performance limits for part number CA11, guaranteed from 0oC to +50oC only. 1 ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions • North America Tel: 800.366.2266 • Europe Tel: +353.21.244.6400 is considering for development. Performance is based on target specifications, simulated results, • India Tel: +91.80.4155721 • China Tel: +86.21.2407.1588 and/or prototype measurements. Commitment to develop is not guaranteed. Visit www.macomtech.com for additional data sheets and product information. PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology Solutions has under development. Performance is based on engineering tests. Specifications are typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make Commitment to produce in volume is not guaranteed. changes to the product(s) or information contained herein without notice. A11 / SMA11 Cascadable Amplifier 5 to 1000 MHz Rev. V2 Outline Drawing: TO-8 * Typical Performance Curves at +25°C WEIGHT: 1 gram (0.04 oz.) max Outline Drawing: TO-8 * WEIGHT: 1 gram (0.04 oz.) max Outline Drawing: TO-8 * WEIGHT: 19 grams (0.67 oz.) max ∗ Dimensions are inches (millimeters) ±0.015 (0.38) unless otherwise specified. 2 ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions • North America Tel: 800.366.2266 • Europe Tel: +353.21.244.6400 is considering for development. Performance is based on target specifications, simulated results, • India Tel: +91.80.4155721 • China Tel: +86.21.2407.1588 and/or prototype measurements. Commitment to develop is not guaranteed. Visit www.macomtech.com for additional data sheets and product information. PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology Solutions has under development. Performance is based on engineering tests. Specifications are typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make Commitment to produce in volume is not guaranteed. changes to the product(s) or information contained herein without notice.