SP24L Series 24-Pin Single Output Passive Delay Modules Optimized for Fastest Rise times and Lowest DCR in single configuration Fast Rise Time, Low DCR Operating Specifications - Passive Delay Lines Better than 10/1 Td/tr typical Pulse Overshoot (Pos) ................................... 5% to 10%, typical Pulse Distortion (S) ..................................................... 3% typical Working Voltage .............................................. 25 VDC maximum Dielectric Strength ........................................... 100VDC minimum Insulation Resistance ........................ 1,000 MΩ min. @ 100VDC Temperature Coefficient ................................. 70 ppm/OC, typical Bandwidth (fC) ....................................................... 0.35/tr approx. Operating Temperature Range ............................. -55O to +125OC Storage Temperature Range ................................ -65O to +150OC High Bandwidth 0.35 / tr Low Distortion LC Network Standard Impedances: 50 - 75 - 100 Ω Stable Delay vs. Temperature: 100 ppm/ OC Operating Temperature Range -55 OC to +125OC Electrical Specifications 1, 2, 3 at 25OC Note: For SMD Package Add "G" to end of P/N in Table Below 50 Ohm Part Number Rise Time max. (ns) DCR max. (Ohms) 75 Ohm Part Number Rise Time max. (ns) DCR max. (Ohms) 100 Ohm Part Number Rise Time max. (ns) DCR max. (Ohms) 50 ± 2.50 SP24L-505 5.2 1.5 SP24L-507 5.2 1.8 SP24L-501 5.2 2.0 75 ± 3.75 SP24L-755 7.1 1.9 SP24L-757 7.1 2.2 SP24L-751 7.3 2.3 100 ± 5.00 SP24L1005 9.2 2.4 SP24L1007 9.3 2.6 SP24L1001 9.4 2.6 150 ± 7.50 SP24L1505 13.8 2.5 SP24L1507 14.0 2.7 SP24L1501 14.0 2.7 200 ± 10.0 SP24L2005 16.5 2.6 SP24L2007 16.5 2.9 SP24L2001 16.5 2.9 250 ± 12.5 SP24L2505 22.0 2.9 SP24L2507 22.0 3.4 SP24L2501 22.0 3.5 300 ± 15.0 SP24L3005 22.4 3.1 SP24L3007 22.6 3.7 SP24L3001 22.8 3.9 400 ± 20.0 SP24L4005 34.0 3.8 SP24L4007 35.0 4.8 SP24L4001 36.0 4.9 500 ± 25.0 SP24L5005 42.0 4.8 SP24L5007 42.0 5.8 SP24L5001 42.0 6.2 750 ± 37.5 SP24L7505 69.0 6.4 SP24L7507 69.0 7.1 SP24L7501 69.0 7.2 1000 ± 50.0 SP24L10005 94.0 7.2 SP24L10007 94.0 8.8 SP24L10001 94.0 9.6 1200 ± 60.0 SP24L12005 110.0 8.3 SP24L12007 111.0 9.8 SP24L12001 112.0 10.4 Delay (ns) 1. Rise Times are measured from 10% to 90% points. 2. Delay Times measured at 50% points of leading edge. 3. Output (100% Tap) terminated to ground through RL=ZO Dimensions in Inches (mm) SP24L Style Single Output Schematic Default Thru-hole 24-Pin Package Example: SP24L1001 COM OUT 24 23 22 21 20 19 18 17 16 15 14 13 1.270 (32.30) .590 (14.99) MAX. MAX. .020 .295 (0.51) (7.49) TYP. 1 2 N/C IN 3 4 5 6 7 8 9 10 11 6SHFLILFDWLRQV VXEMHFW WR FKDQJH ZLWKRXW QRWLFH www.rhombus-ind.com UKRPEXV LQGXVWULHV LQF .010 (0.25) .120 (3.05) 12 COM MIN. .018 (0.46) .040 (1.02) .100 (2.54) TYP. TYP. TYP. For similar package, alternate schematic style with only one common connection (pin 24 = N/C) at pin 12, refer to Series SP241 For 20 Tap versions in the same 24-Pin package, refer to Series SP24A & SP24A MAX. TYP. .600 (15.24) 1.270 (32.30) .590 (14.99) MAX. MAX. .295 (7.49) MAX. .018 (0.46) .040 (1.02) .100 (2.54) TYP. TYP. TYP. .022 (0.56) TYP. .080 (2.03) .737 (18.72) .010 (0.25) TYP. Gull wing SMD Package Add suffix "G" to P/N. Example: SP24L1001G )RU RWKHU YDOXHV &XVWRP 'HVLJQV FRQWDFW IDFWRU\ [email protected] 13 TEL: (714) 898-0960 FAX: (714) 896-0971 SP24L 2001-01