ADVANCED SP8059 10 Channel Photo Detector IC FEATURES • • • • Triple wavelength support: 405, 650 and 780nm 72MHz Data channel bandwidth at -1dB linearity Selectable gain and Power Down Mode Available in wafer form or 5.0 x 4.0 mm 16-pin OLCC package A D Vcc RF+ RFGND APPLICATION B C • • • 4X Blu-Ray Read/Write X16 DVD Read/Write X48 CD Read/Write 1 16 2 15 3 14 4 5 6 SP8059 16-Pin OLCC 13 12 11 7 10 8 9 E G Vref Gain 1 Gain 0 Gain 2 F H GENERAL DESCRIPTION The SP8059 is a ten-channel photo detector IC (PDIC) designed for new generation of Blu-Ray DVD and standard DVD/CD applications and can operate at wavelengths of 405, 650 and 780 nm. The device contains three photo diode (sensor) arrays, one of them with four identical sensors A – D and the other two with two sensors each (E, F and G, H respectively). The ten channels consist of four high speed channels (A, B, C, and D), four slow channels (E, F, G, and H), and two RF channel with paraphrase output (RF+ and RF-). The high speed channels output a signal from one of the sensors A – D. The E, F, G, and H channel outputs are used for servo control. The RF channels output is the sum of A + B + C + D channels with identical weights given to all channels. Three Gain select inputs allow the setting of eight gain modes and a Power Down mode with low power consumption if Gain 0 input is left floating. Low noise operation enables data recovery at very low signal levels. Rev 0.7e (05-17-05) SP8059 Ten-Channel Photo detector IC Copyright 2005 Sipex Corporation SIPEX RESERVES THE RIGHT TO MAKE CHANGES TO THIS DATASHEET. CALL FOR UPDATES: 1-408-934-7500. SIPEX CONFIDENTIAL, PRELIMINARY & PROPRIETARY. DO NOT DISTRIBUTE OR COPY page 1 of 4 ADVANCED SP8059 PIN ASSIGNMENTS Pin # 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 Pin Name A D Vcc RF+ RFGND B C H F Gain 2 Gain 0 Gain 1 Vref G E Pin Function Output of A channel Output of D channel Supply voltage. Bypass to GND with ceramic capacitor 0.1uF Output of RF+ channel. RF+ = 0.375 (A + B + C + D) Output of RF- channel. RF- = -0.375 (A + B + C + D) Ground pin Output of B channel Output of C channel Output of H channel Output of F channel Gain switch input. Gain switch input. Gain switch input. Reference voltage. Bypass to GND with ceramic capacitor 0.1uF Output of G channel Output of E channel BOARD LAYOUT AND GROUNDING To obtain the best performance from the SP8059, a printed circuit board with ground plane is required. Ground pins (pin #6) should be connected to the ground plane. High quality, low series resistance ceramic 0.1uF bypass capacitors should be used at the Vcc and Vref pins (pins #3 and #14). These capacitors must be located as close to the pins as possible. The traces connecting the pins to the ground plane, Vcc, Vref, and bypassing capacitors must be kept short and should be made as wide as possible. Rev 0.7e (05-17-05) SP8059 Ten-Channel Photo detector IC Copyright 2005 Sipex Corporation SIPEX RESERVES THE RIGHT TO MAKE CHANGES TO THIS DATASHEET. CALL FOR UPDATES: 1-408-934-7500. SIPEX CONFIDENTIAL, PRELIMINARY & PROPRIETARY. DO NOT DISTRIBUTE OR COPY page 2 of 4 ADVANCED SP8059 16-PIN ORGANIC LEADLESS CHIP CARRIER (OLCC) PACKAGE DIMENSIONS Dimensions, millimeters Dim. Min. Nom. Max. A 0.85 0.96 1.07 A1 0.36 ref A2 0.25 0.30 0.35 A3 0.6 ref A4 1.15 1.31 1.47 A5 0.54 0.68 0.82 A6 0.48 0.57 0.66 b 0.2 0.25 0.3 D 4.9 5.0 5.1 D1 4.3 4.4 4.5 D2 3.4 ref E 3.9 4.0 4.1 E1 3.3 3.4 3.5 E2 2.4ref e 0.5 BSC L 0.5 0.6 0.7 J 3.5 BSC Location of the photo detectors in a package X0 = 0 ± 50µm Y0 = 0 ± 50µm Z0 (A6) = 570 ± 90µm 0 Θ = 0 ± 1.0 Optical center stability X, Y to package soldering reference in any radial direction at overall operational temperature and life time ……… < TBD Optical center stability Z to package soldering reference over operational temperature range, including optical window properties … < TBD Tilt to optical surface die with respect to soldering reference ………… < 1% Rev 0.7e (05-17-05) SP8059 Ten-Channel Photo detector IC Copyright 2005 Sipex Corporation SIPEX RESERVES THE RIGHT TO MAKE CHANGES TO THIS DATASHEET. CALL FOR UPDATES: 1-408-934-7500. SIPEX CONFIDENTIAL, PRELIMINARY & PROPRIETARY. DO NOT DISTRIBUTE OR COPY page 3 of 4 ADVANCED SP8059 PHOTO DETECTOR PATTERN Note: 1. Detector size units: µm 2. Separation between segments: 5 µm 3. Photo detector is rotated 90 degrees clockwise in both packages on pages 8 and 9 ORDERING INFORMATION Part number SP8059CE Temperature range 0 0 + 70 C SP8059W -0 + 70 C 0 Package Type 16-pin Organic Leadless Chip Carrier (OLCC) Wafer Rev 0.7e (05-17-05) SP8059 Ten-Channel Photo detector IC Copyright 2005 Sipex Corporation SIPEX RESERVES THE RIGHT TO MAKE CHANGES TO THIS DATASHEET. CALL FOR UPDATES: 1-408-934-7500. SIPEX CONFIDENTIAL, PRELIMINARY & PROPRIETARY. DO NOT DISTRIBUTE OR COPY page 4 of 4