STM32W-RFCKIT STM32W Low-cost RF control kit Data brief Features Description ■ STM32W System-on-Chip 32-bit ARM® Cortex™-M3 processor ■ 2.4 GHz IEEE 802.15.4 transceiver and Lower MAC The STM32W RF Control Kit is a low-cost and quick way to get started using STM32W-based point-to-point wireless control applications. ■ 128-Kbyte Flash and 8-Kbyte RAM memory ■ Flash memory upgrade capability via USB ■ ARM Serial Wire Debug (SWD) interface (Remote board) ■ Designed to be powered by USB or with 2 AAA batteries (Remote board) ■ Two user-defined LEDs (green and yellow) ■ Five push buttons to create easy-to-use remote functions (Remote board) It includes everything required by beginners and experienced users to start developing RF control systems. The STM32W RF Control Kit includes one remote board and one receiver board (USB dongle), both using the STM32W microcontroller packaged in a VFQFPN48 for the remote board and VFQFPN40 for the USB dongle. Both boards are also fitted with an STM32F103 microcontroller providing an easy-to-connect solution between a USB link to the PC world. ■ Interoperable with other STM32W tool boards to enlarge wireless network capabilities Debug capabilities are provided by a mini-JTAG connector interface on the remote board (not fitted). ■ 802.15.4, ZigBee RF4CE, ZigBee Pro, 6LoWPAN (Contiki) wireless protocols Free, ready-to-run application firmware are provided at www.st.com/stm32w_rfcontrol. January 2011 Doc ID 18394 Rev 1 For further information contact your local STMicroelectronics sales office. 1/3 www.st.com 3 System requirements 1 2 3 STM32W-RFCKIT System requirements ● Windows® PC (XP) ● USB type A to mini-B cable Development toolchain ● IAR Embedded Workbench® for ARM®: Integrated development environment and optimizing C/C++ compiler for ARM ● GNU Compiler Collection (GCC) compiler system Demonstration software Demonstration software is pre-loaded in the board's Flash memory for easy evaluation of RF communication in Standalone mode. For more information and to download the latest version available, please refer to www.st.com. 4 Revision history Table 1. 2/3 Document revision history Date Revision 19-Jan-2011 1 Changes Initial release. Doc ID 18394 Rev 1 STM32W-RFCKIT Please Read Carefully: Information in this document is provided solely in connection with ST products. STMicroelectronics NV and its subsidiaries (“ST”) reserve the right to make changes, corrections, modifications or improvements, to this document, and the products and services described herein at any time, without notice. All ST products are sold pursuant to ST’s terms and conditions of sale. Purchasers are solely responsible for the choice, selection and use of the ST products and services described herein, and ST assumes no liability whatsoever relating to the choice, selection or use of the ST products and services described herein. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted under this document. If any part of this document refers to any third party products or services it shall not be deemed a license grant by ST for the use of such third party products or services, or any intellectual property contained therein or considered as a warranty covering the use in any manner whatsoever of such third party products or services or any intellectual property contained therein. UNLESS OTHERWISE SET FORTH IN ST’S TERMS AND CONDITIONS OF SALE ST DISCLAIMS ANY EXPRESS OR IMPLIED WARRANTY WITH RESPECT TO THE USE AND/OR SALE OF ST PRODUCTS INCLUDING WITHOUT LIMITATION IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE (AND THEIR EQUIVALENTS UNDER THE LAWS OF ANY JURISDICTION), OR INFRINGEMENT OF ANY PATENT, COPYRIGHT OR OTHER INTELLECTUAL PROPERTY RIGHT. UNLESS EXPRESSLY APPROVED IN WRITING BY AN AUTHORIZED ST REPRESENTATIVE, ST PRODUCTS ARE NOT RECOMMENDED, AUTHORIZED OR WARRANTED FOR USE IN MILITARY, AIR CRAFT, SPACE, LIFE SAVING, OR LIFE SUSTAINING APPLICATIONS, NOR IN PRODUCTS OR SYSTEMS WHERE FAILURE OR MALFUNCTION MAY RESULT IN PERSONAL INJURY, DEATH, OR SEVERE PROPERTY OR ENVIRONMENTAL DAMAGE. ST PRODUCTS WHICH ARE NOT SPECIFIED AS "AUTOMOTIVE GRADE" MAY ONLY BE USED IN AUTOMOTIVE APPLICATIONS AT USER’S OWN RISK. Resale of ST products with provisions different from the statements and/or technical features set forth in this document shall immediately void any warranty granted by ST for the ST product or service described herein and shall not create or extend in any manner whatsoever, any liability of ST. ST and the ST logo are trademarks or registered trademarks of ST in various countries. Information in this document supersedes and replaces all information previously supplied. The ST logo is a registered trademark of STMicroelectronics. All other names are the property of their respective owners. © 2011 STMicroelectronics - All rights reserved STMicroelectronics group of companies Australia - Belgium - Brazil - Canada - China - Czech Republic - Finland - France - Germany - Hong Kong - India - Israel - Italy - Japan Malaysia - Malta - Morocco - Philippines - Singapore - Spain - Sweden - Switzerland - United Kingdom - United States of America www.st.com Doc ID 18394 Rev 1 3/3