STUN06I - STUN5D0 SURFACE MOUNT TRANSIENT VOLTAGE SUPPRESSOR VBR : 6.8 - 200 Volts PPK : 1500 Watts SMC (DO-214AB) 0.060(1.5 2) 0.260(6.60) 0.280(7.11) 0.320(8.13) * 1500W surge capability at 1ms * Excellent clamping capability * Low zener impedance * Fast response time : typically less then 1.0 ps from 0 volt to VBR(min.) * Typical IR less then 1µA above 10V * Pb / RoHS Free 0.3 05(7.75) 0.030(0.7 6) FEATURES : 0.008(0.203) 0.004(0.102) 0.121(3.07) 0.012(0.305) 0.115(2.92) 0.006(0.152) 0.245(6.2 2) 0.103(2.62 ) 0.220(5.5 9) 0.079(2.00 ) MECHANICAL DATA * Case : SMC Molded plastic * Epoxy : UL94V-O rate flame retardant * Lead : Lead Formed for Surface Mount * Polarity : Color band denotes cathode end except Bipolar. * Mounting position : Any * Weight : 0.21 grams Dimensions in inches and (millimeter) DEVICES FOR BIPOLAR APPLICATIONS For bi-directional altered the third letter of type from "U" to be "B". Electrical characteristics apply in both directions MAXIMUM RATINGS Rating at 25 °C ambient temperature unless otherwise specified. Rating Symbol Value Unit Peak Power Dissipation at Ta = 25 °C, Tp=1ms (Note1) PPK Minimum 1500 W Steady State Power Dissipation at TL = 75 °C PD 5.0 W IFSM 200 A TJ, TSTG - 55 to + 150 °C (Note 2) Peak Forward Surge Current, 8.3ms Single Half Sine-Wave Superimposed on Rated Load (JEDEC Method) (Note 3) Operating and Storage Temperature Range Note : (1) Non-repetitive Current pulse, per Fig. 5 and derated above Ta = 25 °C per Fig. 1 (2) Mounted on copper Lead area at 5.0 mm2 ( 0.013 mm thick ). (3) 8.3 ms single half sine-wave, duty cycle = 4 pulses per minutes maximum. Page 1 of 4 Rev. 02 : March 25, 2005 ELECTRICAL CHARACTERISTICS Rating at 25 °C ambient temperature unless otherwise specified Breakdown Voltage @ It ( Note 1 ) Min. Max. It (mA) W orking Peak Reverse Voltage VRWM (V) 6.12 6.45 6.75 7.13 7.38 7.79 8.19 8.65 9.00 9.50 9.90 10.5 10.8 11.4 11.7 12.4 13.5 14.3 14.4 15.2 16.2 17.1 18.0 19.0 19.8 20.9 21.6 22.8 24.3 25.7 27.0 28.5 29.7 31.4 32.4 34.2 35.1 37.1 38.7 40.9 42.3 44.7 45.9 48.5 50.4 53.2 7.48 7.14 8.25 7.88 9.02 8.61 10.0 9.55 11.0 10.5 12.1 11.6 13.2 12.6 14.3 13.7 16.5 15.8 17.6 16.8 19.8 18.9 22.0 21.0 24.2 23.1 26.4 25.2 29.7 28.4 33.0 31.5 36.3 34.7 39.6 37.8 42.9 41.0 47.3 45.2 51.7 49.4 56.1 53.6 61.6 58.8 10 10 10 10 10 10 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 5.50 5.80 6.05 6.40 6.63 7.02 7.37 7.78 8.10 8.55 8.92 9.40 9.72 10.2 10.5 11.1 12.1 12.8 12.9 13.6 14.5 15.3 16.2 17.1 17.8 18.8 19.4 20.5 21.8 23.1 24.3 25.6 26.8 28.2 29.1 30.8 31.6 33.3 34.8 36.8 38.1 40.2 41.3 43.6 45.4 47.8 TYPE VBR (V) STUN06I STUN56I STUN07F STUN57F STUN08C STUN58C STUN09B STUN59B STUN010 STUN510 STUN011 STUN511 STUN012 STUN512 STUN013 STUN513 STUN015 STUN515 STUN016 STUN516 STUN018 STUN518 STUN020 STUN520 STUN022 STUN522 STUN024 STUN524 STUN027 STUN527 STUN030 STUN530 STUN033 STUN533 STUN036 STUN536 STUN039 STUN539 STUN043 STUN543 STUN047 STUN547 STUN051 STUN551 STUN056 STUN556 Page 2 of 4 Maximum Reverse Leakage @ V RWM IR (µA) Maximum Reverse Current IRSM (A) Maximum Clamping Voltage @ IRSM VRSM (V) Maximum Temperature Co-efficient of VBR 1000 1000 500 500 200 200 50 50 10 10 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 139 143 128 132 120 124 109 112 100 103 93.0 96.0 87.0 90.0 79.0 82.0 68.0 71.0 64.0 67.0 56.5 59.5 51.5 54.0 47.0 49.0 43.0 45.0 38.5 40.0 34.5 36.0 31.5 33.0 29.0 30.0 26.5 28.0 24.0 25.3 22.2 23.2 20.4 21.4 18.6 19.5 10.8 10.5 11.7 11.3 12.5 12.1 13.8 13.4 15.0 14.5 16.2 15.6 17.3 16.7 19.0 18.2 22.0 21.2 23.5 22.5 26.5 25.2 29.1 27.7 31.9 30.6 34.7 33.2 39.1 37.5 43.5 41.4 47.7 45.7 52.0 49.9 56.4 53.9 61.9 59.3 67.8 64.8 73.5 70.1 80.5 77.0 0.057 0.057 0.061 0.061 0.065 0.065 0.068 0.068 0.073 0.073 0.075 0.075 0.078 0.078 0.081 0.081 0.084 0.084 0.086 0.086 0.088 0.088 0.090 0.090 0.092 0.092 0.094 0.094 0.096 0.096 0.097 0.097 0.098 0.098 0.099 0.099 0.100 0.100 0.101 0.101 0.101 0.101 0.102 0.102 0.103 0.103 (% / °C) Rev. 02 : March 25, 2005 ELECTRICAL CHARACTERISTICS Rating at 25 °C ambient temperature unless otherwise specified Breakdown Voltage @ It ( Note 1 ) Min. Max. It (mA) W orking Peak Reverse Voltage VRWM (V) 55.8 58.9 61.2 64.6 67.5 71.3 73.8 77.9 81.9 86.5 90.0 95.0 99.0 105 108 114 117 124 135 143 144 152 153 162 162 171 180 190 68.2 65.1 74.8 71.4 82.5 78.8 90.2 86.1 100 95.5 110 105 121 116 132 126 143 137 165 158 176 168 187 179 198 189 220 210 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 50.2 53.0 55.1 58.1 60.7 64.1 66.4 70.1 73.7 77.8 81.0 85.5 89.2 94.0 97.2 102 105 111 121 128 130 136 138 145 146 154 162 171 TYPE VBR (V) STUN062 STUN562 STUN068 STUN568 STUN075 STUN575 STUN082 STUN582 STUN091 STUN591 STUN0B0 STUN5B0 STUN0B1 STUN5B1 STUN0B2 STUN5B2 STUN0B3 STUN5B3 STUN0B5 STUN5B5 STUN0B6 STUN5B6 STUN0B7 STUN5B7 STUN0B8 STUN5B8 STUN0D0 STUN5D0 Maximum Reverse Leakage @ V RWM IR (µA) Maximum Reverse Current IRSM (A) Maximum Clamping Voltage @ IRSM VRSM (V) Maximum Temperature Co-efficient of V BR 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 16.9 17.7 15.3 16.3 13.9 14.6 12.7 13.3 11.4 12.0 10.4 11.0 9.5 9.9 8.7 9.1 8.0 8.4 7.0 7.2 6.5 6.8 6.2 6.4 5.8 6.1 5.2 5.5 89.0 85.0 98.0 92.0 108 103 118 113 131 125 144 137 158 152 173 165 187 179 215 207 230 219 244 234 258 246 287 274 0.104 0.104 0.104 0.104 0.105 0.105 0.105 0.105 0.106 0.106 0.106 0.106 0.107 0.107 0.107 0.107 0.107 0.107 0.108 0.108 0.108 0.108 0.108 0.108 0.108 0.108 0.108 0.108 (% / °C) Note: ( 1 ) VBR measured after It applied for 300 µs., It = square wave pulse or equivalent. ( 2 ) VF = 3.5 Vmax., IF = 100 Amps. ( 6.8 Volts thru 91 Volts ) VF = 5.0 Vmax., IF = 100 Amps. ( 100 Volts thru 200 Volts ) per 1/2 square or equivalent sine wave. PW = 8.3 ms, duty cycle = 4 pulses per minute maximum. ( 3 ) "STU" or "STB" will be omitted in marking on the diode. Page 3 of 4 Rev. 02 : March 25, 2005 RATING AND CHARACTERISTIC CURVES ( STUN06I - STUN5D0 ) FIG.1 - PULSE DERATING CURVE FIG.2 - MAXIMUM NON-REPETITIVE 120 200 PEAK FORWARD SURGE CURRENT, AMPERES PEAK PULSE DERATING IN % OF PEAK POWER OR CURRENT SURGE CURRENT 100 80 60 40 20 0 100 80 60 40 20 8.3 ms SINGLE HALF SINE WAVE JEDEC METHOD 0 0 25 50 75 100 125 150 175 1 Ta, AMBIENT TEMPERATURE, ( °C) 4 6 10 20 40 60 100 NUMBER OF CYCLES AT 60Hz FIG.3 - STEADY STATE POWER DERATING FIG.4 - PULSE RATING CURVE 5.00 100 Pp,PEAK POWER (kW) PD, STEADY STATE POWER DISSIPATION (WATTS) 2 3.75 2.50 1.25 Single Phase Half Wave 60 Hz Resistive or Inductive load 10 1.0 0.1 0.1µs 1.0µs 10µs 100µs 1.0ms 10ms 0 0 25 50 75 100 125 150 175 200 tp, PULSE WIDTH TL, LEAD TEMPERATURE (°C) PEAK PULSE CURRENT - % I RMS FIG.5 - PULSE WAVEFORM Tr = 10µs 100 Peak Value IRMS TJ=25 °C Pulse Width (tp) is defined as that point where the peak current decays to 50% of IRSM Half Value - IRMS 2 50 10X1000 Waveform as defined by R.E.A. tp 0 0 1.0 2.0 3.0 4.0 T, TIME(ms) Page 4 of 4 Rev. 02 : March 25, 2005