PAGE: SAFETY DATA SHEET 1 of 4 PRINT DATE: REF: 06/08/1997 SWA400H, SWA400S 1. IDENTIFICATION OF THE SUBSTANCE/PREPARATION AND THE COMPANY/UNDERTAKING Product name: SAFEWASH 2000 Product code: SWA400H, SWA400S Supplier: ELECTROLUBE H.K. Wentworth Ltd., Wentworth House, Blakes Road, Wargrave, Berkshire, RG10 8AW, United Kingdom. Fax No: 0118 9403084 0118 9404031 Emergency telephone number: 2. COMPOSITION/INFORMATION ON INGREDIENTS Identification of the preparation Chemical Name ETHANOLAMINE CAS-No 141-43-5 EEC-No 603-030-00-8 METHOXYPROPOXYPROPANOL BUTANE Non hazardous material 34590-94-8 106-97-8 - 203-448-7 - Class Xn; R20 Xi; R36/37/38 R10 F+; R12 - Weight % <10 <10 5 >75 3. HAZARDS IDENTIFICATION Most important hazards: Specific hazards Non hazardous. Aerosol dispensers, compressed liquefied gas. High concentration of vapours may induce unconsciousness / narcosis. May cause skin irritation and/or dermatitis. 4. FIRST AID MEASURES General advice: Inhalation: Skin contact: Eye contact: Ingestion: Remove from exposure, lie down. Move to fresh air Wash off immediately with soap and plenty of water. Treat frostbitten areas as needed Flush eye(s) immediately with plenty of water. If eye irritation persists, consult a specialist. Clean mouth with water and drink afterwards plenty of water. Consult a physician if necessary. 5. FIRE-FIGHTING MEASURES Suitable extinguishing media: Extinguish with carbon dioxide, dry chemical, foam or waterspray. Extinguishing media which must not be used for safety reasons: Not applicable. Specific hazards: Not applicable. Special protective equipment for firefighters: Wear self contained breathing apparatus for fire fighting if necessary 6. ACCIDENTAL RELEASE MEASURES Personal precautions: Environmental precautions: Wear suitable gloves and eye/face protection No special environmental precautions required. Product name: SAFEWASH 2000 PAGE: 2 of 4 PRINT DATE: 06/08/1997 SWA400H, SWA400S Soak up with inert absorbent material (e.g. sand, silica gel, acid binder, universal binder, sawdust). Keep in suitable, closed containers for disposal. REF: Methods for cleaning up: 7. HANDLING AND STORAGE Handling: Storage: Use only in well-ventilated areas. Avoid contact with the skin and the eyes.Do not breath vapours or spray mist. When using, do not eat, drink or smoke. Keep containers tightly closed in a cool, well-ventilated place < 45°c 8. EXPOSURE CONTROLS / PERSONAL PROTECTION Chemical Name: ETHANOLAMINE METHOXYPROPOXYPROPANOL BUTANE National occupational exposure limits: Long term (8 hrs) = 100 ppm Long term (8 hrs) = 600 ppm Short term (15 min) = 750 ppm - Non hazardous material Engineering measures Ensure adequate ventilation, especially in confined areas. Personal protection equipment: - Respiratory protection: No special precautions required. - Hand protection: Latex gloves. - Eye protection: No special precautions required. - Skin and body protection: No special precautions required Hygiene measures: In accordance with local and national regulations. 9. PHYSICAL AND CHEMICAL PROPERTIES Form: Colour: Odour: pH: Boiling point/range: Flash point: liquid green characteristic ( 20 °C) Vapour pressure: ( 20 °C) Relative density: ( 20 °C) Solubility: Water solubility ( 20 °C) Viscosity: ( 15 °C) 11 - 13 100 does not flash < 1.3 (MELA) >= 0.99 <= 1.10 completely miscible 5 - 10 °C °C hPa (g/l) mPa.s 10. STABILITY AND REACTIVITY Stability: Conditions to avoid: Materials to avoid: Hazardous decomposition products: Stable. Incompatible with strong acids and oxidizing agents. strong acids and oxidizing agents No decomposition if stored and applied as directed SAFEWASH 2000 Product name: PAGE: 3 of 4 PRINT DATE: 06/08/1997 REF: SWA400H, SWA400S 11. TOXICOLOGICAL INFORMATION Acute toxicity: Local effects: Ethanolamine: LD50/oral/rat = 1.7 - 2.7g/kg Prolonged skin contact may cause skin irritation and/or dermatitis. Contact with eyes may cause irritation Not applicable Did not show carcinogenic, teratogenic or mutagenic effects in animal experiments Not applicable Sensitization: Long term toxicity: Chronic toxicity: 12. ECOLOGICAL INFORMATION Mobility: Persistence and degradability: Bioaccumulation: Ecotoxicity effects: Soluble in water. Readily biodegradable, according to appropriate OECD test Not applicable Not applicable 13. DISPOSAL CONSIDERATIONS Waste from residues / unused products: Contaminated packaging: In accordance with local and national regulations. Do not pierce or burn even when empty 14. TRANSPORT INFORMATION UN-No: 1950 ADR/RID Class: Marine pollutant: 2 No Item: HI/UN No: 5ºA 1950 Proper shipping name: Aerosol dispensers IMO Class: EmS: Proper shipping name: ICAO Class: Proper shipping name - IMDG Page: MFAG: - Aerosol dispensers 2.2 UN/ID No: Aerosols, non flammable, n.o.s., 1950 15. REGULATORY INFORMATION Classification according to European directive on classification of hazardous preparations 90/492/EEC - Contains: - Symbol(s): R-phrase(s): S-phrase(s): S2 - Keep out of reach of children. S3 - Keep in a cool place.. 16. OTHER INFORMATION Recommended use: Recommended restrictions: Revision number: Further information: The level of Ethanolamine is below levels at which it produces irritant/harmful effects. 7 CN no: 34029090. Flammable composition = 10% Product name: SAFEWASH 2000 PAGE: 4 of 4 PRINT DATE: 06/08/1997 REF: SWA400H, SWA400S Contact Name: Carolyn Booth Department: Technical The information provided in this Safety Data Sheet is correct to the best of our knowledge, information and belief at the date of its publication The information given is designed only as a guidance for safe handling, use, processing, storage, transportation, disposal and release and is not to be considered a warranty or quality specification The information relates only to the specific material designated and may not be valid for such material used in combination with any other materials or in any process unless specified in the text Technical Data Sheet PRODUCT DESCRIPTION: Safewash 2000 DATE: 03/97 PRODUCT CODE: SWA400H PAGES: 1 PRODUCT DESCRIPTION An aerosol containing a unique blend of biodegradable solvents in an aqueous medium formulated to replace CFCs or highly flammable cleaning solvents in electronic applications. A full range of bulk Safewash is also available for use in utrasonic and pressure spray applications. PRODUCT USE Excellent flux removal properties ensure fast and effective cleaning of printed circuit boards, electronic assemblies and print screens. The unique foaming action dissolves and lifts dirt/ flux from the surface. The foam ensures good contact time, hence economical use of the product. FEATURES * * * * * 100% Ozone Friendly Biodegradable Fast, effective foam action Low corrosivity Cleans to MIL P 28809A APPLICATION Spray aerosol onto area to be cleaned. Leave foam on assembly for 2 to 3 minutes. Brushing may be required to remove stubborn deposits. Rinse thoroughly with tapwater and then rinse off with Saferinse 2000 which removes the last trace of ions and aids drying. Dry with warm air, or with Electrolube Airduster. Test before use on sensitive materials eg. ABS, Acrylic, Polycarbonate, Polystyrene. TYPICAL PROPERTIES Boiling Point Flash Point 100°C None PACKAGING ORDER CODE 400 ml Aerosol with integral brush SWA400H Copyright Electrolube 1997 All information is given in good faith but without warranty. Properties are given as a guide only and should not be taken as a specification. Electrolube cannot be held responsible for the performance of its products within any application determined by the customer, who must satisfy themselves as to the suitability of the product. ELECTROLUBE Wentworth House, Blakes Road, Wargrave, Berkshire, RG10 8AW, UK Telephone: +44(0) 118 940 4031/ 3014 Fax: +44(0) 118 940 3084 ISO 9002 Registered Firm. Certificate No. FM 32082