5V/3.3V, 3GHz PECL/LVPECL D FLIP-FLOP WITH SET AND RESET Micrel, Inc. ECL Pro™ SY10EP31V ECL Pro™ SY10EP31V FEATURES ■ ■ ■ ■ ■ Guaranteed >3GHz bandwidth over temperature Guaranteed <440ps propagation delay 3.3V and 5V power supply options Wide operating temperature range: –40°C to +85°C Available in 8-pin (3mm) MSOP and SOIC package ECL Pro™ DESCRIPTION The SY10EP31V is a D flip-flop with set and reset. The device is pin and functionally equivalent to the EL31 and LVEL31 devices. With AC performance much faster than the EL31 and LVEL31 devices, the EP31V is ideal for applications requiring the fastest AC performance available. Both SET and RESET inputs are asynchronous, level triggered signals. Data enters the master portion of the flip-flop when CLK is low and is transferred to the slave, and thus the outputs, upon a positive transition of the CLK. TRUTH TABLE PIN NAMES Pin Function D SET RESET CLK Q L L Z L CLK ECL Clock Inputs L RESET ECL Asynchronous Reset H L L Z H SET ECL Asynchronous Set X H L X H D ECL Data Input with Internal 75kΩ Pull-Down Resistor, Default State is LOW. X L H X L X H H X UNDEF Q, /Q ECL Data Outputs VCC Positive Supply VEE Negative, 0 Supply Z = LOW to HIGH Transition ECL Pro is a trademark of Micrel, Inc. M9999-112805 [email protected] or (408) 955-1690 Rev.: D 1 Amendment: /0 Issue Date: November 2005 ECL Pro™ SY10EP31V Micrel, Inc. PACKAGE/ORDERING INFORMATION Ordering Information(1) SET 1 8 VCC Package Type Operating Range Package Marking Lead Finish SY10EP31VKC K8-1 Commercial HP31 Sn-Pb SY10EP31VKCTR(2) K8-1 Commercial HP31 Sn-Pb SY10EP31VZC Z8-1 Commercial HEP31V Sn-Pb SY10EP31VZCTR(2) Z8-1 Commercial HEP31V Sn-Pb SY10EP31VKI K8-1 Industrial HP31 Sn-Pb SY10EP31VKITR(2) K8-1 Industrial HP31 Sn-Pb SY10EP31VZI Z8-1 Industrial HEP31V Sn-Pb SY10EP31VZITR(2) Z8-1 Industrial HEP31V Sn-Pb SY10EP31VKG(3) K8-1 Industrial HP31 with Pb-Free bar-line indicator Pb-Free NiPdAu SY10EP31VKGTR(2, 3) K8-1 Industrial HP31 with Pb-Free bar-line indicator Pb-Free NiPdAu SY10EP31VZG(3) Z8-1 Industrial HEP31V with Pb-Free bar-line indicator Pb-Free NiPdAu SY10EP31VZGTR(2, 3) Z8-1 Industrial HEP31V with Pb-Free bar-line indicator Pb-Free NiPdAu S D 2 CLK 3 D Flip Flop 7 Q Part Number 6 /Q R RESET 4 5 VEE 8-Pin MSOP and SOIC Packages Notes: 1. Contact factory for die availability. Dice are guaranteed at TA = 25°C, DC Electricals only. 2. Tape and Reel. 3. Pb-Free package is recommended for new designs. M9999-112805 [email protected] or (408) 955-1690 2 ECL Pro™ SY10EP31V Micrel, Inc. ABSOLUTE MAXIMUM RATINGS(1) Symbol Rating Value Unit VCC Power Supply Voltage (VEE = 0) +6.0 to 0 V VEE Power Supply Voltage (VCC = 0) –6.0 to 0 V VIN Input Voltage (VCC = 0V, VIN not more negative than VEE) Input Voltage (VEE = 0V, VIN not more positive than VCC) –6.0 to 0 +6.0 to 0 V V IOUT Output Current 50 100 mA TA Operating Temperature Range –40 to +85 °C TLEAD Lead Temperature (soldering, 20sec.) +260 °C Tstore Storage Temperature Range –65 to +150 °C θJA Thermal Resistance (Junction-to-Ambient) SOIC-8 –Still Air –500lfpm 160 109 °C/W °C/W –Still Air –500lfpm 206 155 °C/W °C/W SOIC-8 MSOP-8 39 39 °C/W °C/W –Continuous –Surge MSOP-8 Thermal Resistance (Junction-to-Case) θJC Note 1. Permanent device damage may occur if absolute maximum ratings are exceeded. This is a stress rating only and functional operation is not implied at conditions other than those detailed in the operational sections of this data sheet. Exposure to absolute maximum ratlng conditions for extended periods may affect device reliability. 5V PECL DC ELECTRICAL CHARACTERISTICS(1) VCC = +5.0V ±10%, VEE = 0V(2) TA = –40°C Symbol IEE VOH Parameter Power Supply Output HIGH Current(3) Voltage(4) Voltage(4) TA = +25°C TA = +85°C Min. Typ. Max. Min. Typ. Max. Min. Typ. Max. Unit — 34 44 — 35 45 — 37 47 mA 3865 3940 4115 3930 4055 4180 3990 4115 4240 mV 3050 3190 3315 3050 3255 3380 3050 3315 3440 mV VOL Outuput LOW VIH Input HIGH Voltage 3790 — 4115 3855 — 4180 3915 — 4240 mV VIL Input LOW Voltage 3065 — 3390 3130 — 3455 3190 — 3515 mV IIH Input HIGH Current — — 150 — — 150 — — 150 µA IIL Input LOW Current 0.5 — — 0.5 — — 0.5 — — µA Note 1. 10EP circuits are designed to meet the DC specifications shown in the above table after thermal equilibrium has been established. The circuit is in a test socket or mounted on a printed circuit board and traverse airflow greater than 500lfpm is maintained. Note 2. Input and output parameters vary 1:1 with VCC. Note 3. VCC = 0V, VEE = VEE(min) to VEE(max), all other pins floating. Note 4. All loading with 50Ω to VCC – 2.0V. M9999-112805 [email protected] or (408) 955-1690 3 ECL Pro™ SY10EP31V Micrel, Inc. 3.3V LVPECL DC ELECTRICAL CHARACTERISTICS(1) VCC = +3.3V ±10%, VEE = 0V(2) TA = –40°C Symbol Parameter Power Supply Current(3) IEE VOH Output HIGH Voltage(4) Voltage(4) TA = +25°C TA = +85°C Min. Typ. Max. Min. Typ. Max. Min. Typ. Max. Unit — 34 44 — 35 45 — 37 47 mA 2165 2240 2415 2230 2355 2480 2290 2415 2540 mV 1350 1490 1615 1350 1555 1680 1350 1615 1740 mV VOL Outuput LOW VIH Input HIGH Voltage 2090 — 2415 2155 — 2480 2215 — 2540 mV VIL Input LOW Voltage 1365 — 1690 1430 — 1755 1490 — 1815 mV IIH Input HIGH Current — — 150 — — 150 — — 150 µA IIL Input LOW Current 0.5 — — 0.5 — — 0.5 — — µA Note 1. 10EP circuits are designed to meet the DC specifications shown in the above table after thermal equilibrium has been established. The circuit is in a test socket or mounted on a printed circuit board and traverse airflow greater than 500lfpm is maintained. Note 2. Input and output parameters vary 1:1 with VCC. Note 3. VCC = 0V, VEE = VEE(min) to VEE(max), all other pins floating. Note 4. All loading with 50Ω to VCC – 2.0V. NECL DC ELECTRICAL CHARACTERISTICS(1) VCC = 0V, VEE = –3.3V to –5.0V ±10%(2) TA = –40°C Symbol IEE VOH Parameter Power Supply Output HIGH Current(3) Voltage(4) Voltage(4) TA = +25°C TA = +85°C Min. Typ. Max. Min. Typ. Max. Min. Typ. Max. Unit — 34 44 — 35 45 — 37 47 mA –1135 –1060 –885 –1070 –945 –820 –1010 –885 –760 mV –1950 –1810 –1685 –1950 –1745 –1620 –1950 –1685 –1560 mV VOL Outuput LOW VIH Input HIGH Voltage –1210 — –885 –1145 — –820 –1085 — –760 mV VIL Input LOW Voltage –1935 — –1610 –1870 — –1545 –1810 — –1485 mV IIH Input HIGH Current — — 150 — — 150 — — 150 µA IIL Input LOW Current 0.5 — — 0.5 — — 0.5 — — µA Note 1. 10EP circuits are designed to meet the DC specifications shown in the above table after thermal equilibrium has been established. The circuit is in a test socket or mounted on a printed circuit board and traverse airflow greater than 500lfpm is maintained. Note 2. Input and output parameters vary 1:1 with VCC. Note 3. VCC = 0V, VEE = VEE(Min) to VEE(Max), all other pins floating. Note 4. All loading with 50Ω to VCC – 2.0V. M9999-112805 [email protected] or (408) 955-1690 4 ECL Pro™ SY10EP31V Micrel, Inc. AC ELECTRICAL CHARACTERISTICS(1) NECL operation: VCC = 0V, VEE = –3.3V to –5.0V ±10%; PECL operation: VEE = 0V, VCC = +3.3V to +5.0V ±10%. TA = –40°C Symbol Parameter fMAX Maximum Frequency(2) tPD TA = +25°C TA = +85°C Min. Typ. Max. Min. Typ. Max. Min. Typ. Max. Unit 3 — — 3 — — 3 — — GHz Propagation Delay to Output CLK➝ Q, /Q SET, RESET➝ Q, /Q 250 230 330 380 400 450 270 230 340 400 410 410 300 230 370 430 440 500 tRR Set/Reset Recovery 225 — — 225 — — 225 — — ps tS Setup Time 100 — — 100 — — 100 — — ps tH Hold Time 150 — — 150 — — 150 — — ps tPW Minimum Pulse Width SET, RESET 550 450 — 550 450 — 550 450 — ps ps ps tJITTER Cycle-to-Cycle RMS Jitter — 0.2 <1.0 — 0.2 <1.0 — 0.2 <1.0 psRMS tr tf Output Rise/Fall Times (20% to 80%) 50 120 180 60 130 200 70 150 220 ps Q, /Q Note 1. Measured using a 750mV source, 50% duty cycle clock source. All loading with 50Ω to VCC –2.0V. Note 2. fMAX guaranteed for functionality only. VOL and VOH levels are guaranteed at DC only. M9999-112805 [email protected] or (408) 955-1690 5 ECL Pro™ SY10EP31V Micrel, Inc. 8-PIN MSOP (K8-1) Rev. 01 M9999-112805 [email protected] or (408) 955-1690 6 ECL Pro™ SY10EP31V Micrel, Inc. 8-PIN PLASTIC SOIC (Z8-1) Rev. 03 MICREL, INC. 2180 FORTUNE DRIVE SAN JOSE, CA 95131 TEL + 1 (408) 944-0800 FAX + 1 (408) 474-1000 WEB USA http://www.micrel.com The information furnished by Micrel in this datasheet is believed to be accurate and reliable. However, no responsibility is assumed by Micrel for its use. Micrel reserves the right to change circuitry and specifications at any time without notification to the customer. Micrel Products are not designed or authorized for use as components in life support appliances, devices or systems where malfunction of a product can reasonably be expected to result in personal injury. Life support devices or systems are devices or systems that (a) are intended for surgical implant into the body or (b) support or sustain life, and whose failure to perform can be reasonably expected to result in a significant injury to the user. A Purchaser’s use or sale of Micrel Products for use in life support appliances, devices or systems is at Purchaser’s own risk and Purchaser agrees to fully indemnify Micrel for any damages resulting from such use or sale. © 2005 Micrel, Incorporated. M9999-112805 [email protected] or (408) 955-1690 7