SZ1A3.3 thru SZ1A100 Solid State Devices, Inc. 14701 Firestone Blvd * La Mirada, Ca 90638 Phone: (562) 404-4474 * Fax: (562) 404-1773 [email protected] * www.ssdi-power.com DESIGNER’S DATA SHEET FEATURES: 1.0W and 1.5W 3.3 – 100 VOLTS ZENER DIODES Hermetically Sealed in Glass Axial Lead Rated at 1 Watt Surface Mount Rated at 1.5 Watts Available in Axial (__), Round Tab Surface Mount (SM) and Square Tab Surface Mount (SMS) Versions Available to TX, TXV, and Space Levels 5/ Available in 10% and 5% Tolerances. For other Voltage Tolerances, Contact Factory. Maximum Ratings Symbol Value Units Nominal Zener Voltage VZ 3.3 - 100 V Forward Surge Current 8.3 msec pulse IZSM 45 - 1380 mA 11 - 276 16.5 – 414 1.0 1.5 mA Zener Current Axial SM, SMS IZM Continuous Power Axial SM, SMS PD W Operating and Storage Temp. Top, Tstg -65 to +175 ºC Thermal Resistance, Junction to Lead, L=3/8” (for Axial) Junction to End Cap (for SM, SMS) Junction to Ambient (for All) RθJL RθJE RθJA 125 83.3 150 ºC/W Part Number/Ordering Information 4/ SZ1 __ __ │ │ │ │ │ │ │ │ │ │ │ └ │ │ │ │ │ │ │ │ └ __ __ │ └ Screening 5/ __ = Not Screened │ TX = TX Level │ TXV = TXV │ S = S Level (for SM, use –S) └ 3/ DIM A B C D AXIAL (__) DIM A B C D MIN. .080” .145” 1.00” .028” MAX .107” .205” --.034” All dimensions are prior to soldering MIN. .084” .189” .010” MAX. .102” .205” .022” Body to Tab Clearance: .001” ROUND TAB (SM) All dimensions are prior to soldering Package Type __ = Axial Leaded SM = Surface Mount Round Tab SMS = Surface Mount Square Tab Voltage/Family 3.3 thru 100 = 3.3V thru 100V, See Table on Page 2 Voltage Tolerance A = 10% Voltage Tolerance B = 5% Voltage Tolerance DIM A B C D MIN. .125” .195” .023” MAX. .135” .260” .027” Body to Tab Clearance: .001” SQUARE TAB (SMS) All dimensions are prior to soldering NOTE: All specifications are subject to change without notification. SCD's for these devices should be reviewed by SSDI prior to release. DATA SHEET #: Z00003G DOC Solid State Devices, Inc. SZ1A3.3 thru SZ1A100 14701 Firestone Blvd * La Mirada, Ca 90638 Phone: (562) 404-4474 * Fax: (562) 404-1773 [email protected] * www.ssdi-power.com Electrical Characteristics @ 25°C (Unless Otherwise Specified) PART NUMBER (note 6) Voltage Tolerance Nominal Zener Voltage (note 1) VZ @ IZT Zener Test Current IZT Maximum Zener Impedance (note 2) ZZ @ IZT ZZK @ IZK = 10%IZT Ohms Maximum Reverse Leakage Current IR @ VR VR 10% VR 5% (A Suffix) (B Suffix) μA Volts Typical Range of Temperature Coefficient (note 7) TC @ IZT Maximum Continuous Current Maximum Surge Current (note 8) Axial (__) Surface Mount (SM) & (SMS) IZM IZM IZSM 10% 5% Volts mA SZ1A3.3 SZ1A3.6 SZ1A3.9 SZ1A4.3 SZ1A4.7 SZ1B3.3 SZ1B3.6 SZ1B3.9 SZ1B4.3 SZ1B4.7 3.3 3.6 3.9 4.3 4.7 76 69 64 58 53 10 10 9.0 9.0 8.0 400 400 400 400 500 100 100 50 10 10 0.95 0.95 0.95 0.95 0.95 1.0 1.0 1.0 1.0 1.0 mV/ºC -3 to 0 -3 to 0 -3 to 0 -3 to 0 -2 to 1 276 252 238 213 194 mA 414 378 357 319.5 291 1380 1260 1190 1070 970 mA SZ1A5.1 SZ1A5.6 SZ1A6.2 SZ1A6.8 SZ1A7.5 SZ1B5.1 SZ1B5.6 SZ1B6.2 SZ1B6.8 SZ1B7.5 5.1 5.6 6.2 6.8 7.5 49 45 41 37 34 7.0 5.0 2.0 1.5 3.5 550 600 700 700 700 10 10 10 10 10 0.95 1.90 2.90 2.90 2.90 1.0 2.0 3.0 3.0 3.0 0 to 2 1 to 3 2 to 4 2.5 to 4.5 3 to 5 178 162 146 133 121 267 243 219 199.5 181.5 890 810 730 660 605 SZ1A8.2 SZ1A9.1 SZ1A10 SZ1A11 SZ1A12 SZ1B8.2 SZ1B9.1 SZ1B10 SZ1B11 SZ1B12 8.2 9.1 10 11 12 31 28 25 23 21 4.0 4.5 5.0 7.0 8.0 700 700 700 700 700 10 10 10 7.5 5.0 5.0 5.3 5.9 6.6 7.2 5.2 5.7 6.2 6.9 7.6 4 to 5.5 5 to 6.3 5.8 to 7.0 6.8 to 8 7.9 to 9.0 140 125 115 105 95 210 187.5 172.5 157.5 142.5 550 500 454 414 380 SZ1A13 SZ1A15 SZ1A16 SZ1A18 SZ1A20 SZ1B13 SZ1B15 SZ1B16 SZ1B18 SZ1B20 13 15 16 18 20 19 17 15.5 14.0 12.5 9.0 10 14 16 20 700 700 700 750 750 5.0 2.0 1.0 1.0 1.0 8.0 8.6 9.4 10.8 11.6 8.4 9.1 9.9 11.4 12.2 10 to 13 11 to 14 12 to 15 14 to 17 16 to 19 85 80 74 63 60 127.5 120 111 94.5 90 344 304 285 250 225 SZ1A22 SZ1A24 SZ1A27 SZ1A30 SZ1A33 SZ1B22 SZ1B24 SZ1B27 SZ1B30 SZ1B33 22 24 27 30 33 11.5 10.5 9.5 8.5 7.5 22 23 25 35 40 750 750 750 1000 1000 0.5 0.5 0.5 0.5 0.5 13.0 14.4 15.9 17.3 19.8 13.7 15.2 16.7 18.2 20.6 17 to 20 19 to 22 21 to 24 24 to 28 28 to 32 52 47 43 40 34 78 70.5 64.5 60 51 205 190 170 150 135 SZ1A36 SZ1A39 SZ1A43 SZ1A47 SZ1A51 SZ1B36 SZ1B39 SZ1B43 SZ1B47 SZ1B51 36 39 43 47 51 7.0 6.5 6.0 5.5 5.0 45 50 60 70 80 1000 1000 1500 1500 1500 0.5 0.5 0.5 0.5 0.5 21.8 24.1 26.4 28.7 30.7 22.8 25.1 27.4 29.7 32.7 30 to 35 32 to 37 35 to 40 40 to 45 44 to 50 31 28 26 23 21 46.5 42 39 34.5 31.5 125 115 110 95 90 SZ1A56 SZ1A62 SZ1A68 SZ1A75 SZ1A82 SZ1B56 SZ1B62 SZ1B68 SZ1B75 SZ1B82 56 62 68 75 82 4.5 4.0 3.7 3.3 3.0 95 110 125 150 175 2000 2000 2000 2000 3000 0.5 0.5 0.5 0.5 0.5 33.8 36.8 40.6 45.1 48.7 35.8 38.8 42.6 47.1 51.7 48 to 54 53 to 60 60 to 68 65 to 74 70 to 80 19 18 17 15 14 28.5 27 25.5 22.5 21 80 70 65 60 55 SZ1A91 SZ1A100 SZ1B91 SZ1B100 91 100 2.8 2.5 200 250 3000 3000 0.5 0.5 53.0 59.2 56.0 62.2 80 to 91 90 to 100 12 11 18 16.5 50 45 NOTES: 1/ All zener voltages are measured with an automated test set using a 35 msec test time. Longer or shorter test time will have a corresponding effect on the measured value due to heating effects. 2/ Zener impedance is derived from the AC voltage divided by the AC current with RMS value of 10% of DC zener test current superimposed on the test current. 3/ SSDI standard marking consists of a contrasting color cathode dot or band. Part number information is included on packaging labels. 4/ For Ordering Information, Price, Operating Curves, and Availability- Contact Factory. 5/ Screening based on MIL-PRF-19500. Screening flows available on request. 6/ Suffix “SM” for Round Tab Surface Mount and “SMS” for Square Tab Surface Mount. 7/ Temperature Range of Coefficient is -55°C to +150°C. 8/ Figures shown are for a peak sinusoidal surge current of 8.3 msec duration, non-repetitive. The 8.3 msec square wave pulse rating is 71% of the value shown. NOTE: All specifications are subject to change without notification. SCD's for these devices should be reviewed by SSDI prior to release. DATA SHEET #: Z00003G DOC