ITT T101KT9AKE

C&K T Series
Subminiature Toggle Switches
Features/Benefits
• Compact size—small footprint
• Single and double pole models
• PC and panel mount
Typical Applications
• Hand-held telecommunications
• Instrumentation
• Medical equipment
options available
• RoHS compliant models available
Models Available
Specifications
Materials
CONTACT RATING: B contact material: 0.4 VA max. @ 20 V AC or
DC max. Q contact material (TX01 models): 3 AMPS @
120 V AC or 28 V DC. All other models: 2 AMPS @
120 V AC or 28 V DC. See page G-42 for additional ratings.
ELECTRICAL LIFE: TX01 models: 60,000 make-and-break
cycles at full load. All other models: 30,000 cycles.
CONTACT RESISTANCE: Below 20 m Ω typ. initial @
2-4 V DC, 100 mA, for both silver and gold plated contacts.
INSULATION RESISTANCE: 109 Ω min.
DIELECTRIC STRENGTH: 1000 Vrms min. @ sea level.
OPERATING TEMPERATURE: –30ºC to 85ºC.
SOLDERABILITY: Per MIL-STD-202F method 208D, or
EIA RS-186E method 9 (1 hour steam aging).
CASE: Glass filled nylon 6/6, flame retardant, heat stabilized or
diallyl phthalate (DAP), (UL 94V-0).
ACTUATOR: Brass, chrome plated.
BUSHING: Brass, nickel plated.
HOUSING: Stainless steel.
SWITCH SUPPORT: Brass, matte-tin plated.
END CONTACTS: B contact material: Copper alloy, with gold plate
over nickel plate. Q contact material: Coin silver, silver plated.
See above for additional contact materials.
CENTER CONTACTS & TERMINALS: B contact material: Copper alloy,
with gold plate over nickel plate. Q contact material: Copper alloy,
silver plated. See page G-42 for additional contact materials.
TERMINAL SEAL: Epoxy.
HARDWARE: Nut & Locking Ring: Brass, nickel plated.
Lockwasher: Steel, nickel plated. Additional hardware available
separately, see Section O.
NOTE: Any models supplied with P, R, Q, B or G contact material are RoHS compliant
and compatible. For the latest information regarding RoHS compliance, please go to:
www.ittcannon.com/rohs.
NOTE: Specifications and materials listed above are for switches with standard options.
For information on specific and custom switches, consult Customer Service Center.
Build-A-Switch
To order, simply select desired option from each category and place in the appropriate box. Available options are shown and
described on pages G-37 thru G-42. For additional options not shown in catalog, consult Customer Service Center. All models
have epoxy terminal seal and are compatible with all “bottom-wash” PCB cleaning methods.
Switch Function
T101 SPDT On-None-On
T102 SPDT Off-None-On
T103 SPDT On-Off-On
T105 SPDT Mom.-Off-Mom.
T107 SPDT On-Off-Mom.
T201 DPDT On-None-On
T205 DPDT Mom.-Off-Mom.
Actuator
P3 Flatted,
anti-rotation,
.490" high
S .370" high
K Locking lever, round tip
L1 .620" high
M1 .220" high
S1 .410" high
Bushing
H .220" high, threaded, flat
H9 .220" high, unthreaded, flat
CF Splashproof, .310" high, threaded, flat
D9 .260" high, unthreaded, keyway
T .310" high, threaded, flat
T9 .310" high, unthreaded, flat
TD .260" high, threaded, keyway
TK .310" high, threaded, keyway
Y .220" high, threaded, keyway
Y9 .220" high, unthreaded, keyway
Toggle
G
Terminations
A Right angle, PC thru-hole
AV Vertical right angle,
PC thru-hole
C PC Thru-hole
V3 Vertical mount V-bracket
Z Solder lug
W Wire wrap
Seal
E Epoxy
Contact Material
B Gold
K Gold, tin-lead
P Gold, matte tin
Q Silver
G Gold over silver
L Gold over silver, tin-lead
R Gold over silver, matte-tin
Dimensions are shown: Inch (mm)
Specifications and dimensions subject to change
G–37
www.ittcannon.com
C&K T Series
Subminiature Toggle Switches
SWITCH FUNCTION
SWITCH FUNCTION
POS. 1
POS. 2
POS. 3
NO.
POLES
MODEL
NO.
POS. 1
C&K marking on opposite side
T101
ON
NONE
ON
T103
ON
OFF
ON
T105
MOM.
OFF
MOM.
T107
ON
OFF
MOM.
T102
OFF
NONE
ON
CONNECTED TERMINALS
POS. 2
POS. 3
C&K marking on opposite side
SCHEMATIC
2-3
N/A
2-1
2-3
OPEN
2-1
SP
SPDT
OPEN
N/A
3-1
SPST
SPDT
Part number shown: T101SHZQE
DP
T201
ON
NONE
ON
2-3,5-6
N/A
2-1,5-4
T205
MOM.
OFF
MOM.
2-3,5-6
OPEN
2-1,5-4
DPDT
DPDT
Terminal Nos.
For Reference Only
Part number shown: T201SHZQE
MOM. = Momentary
All models
with all options when ordered with G, L, R or Q contact material.
G
Toggle
Dimensions are shown: Inch (mm)
Specifications and dimensions subject to change
G–38
www.ittcannon.com
C&K T Series
Subminiature Toggle Switches
ACTUATOR
S
M1
.370" HIGH
S1
.220" HIGH
(with “T” bushing)
1
.410" HIGH
(with “T” bushing)
2
2
Standard with Z, C or W terminations.
L1
P3
.620" HIGH
ANTI-ROTATION, FLATTED,
.450" HIGH
1
Actuator shown with standard H bushing.
Subtract .040 (1,02) for TD and D9 bushings,
subtract .090 (2,29) for T, T9, TK, K9 &
CF bushings.
2
2
Actuators shown with T, T9, TK & CF bushings,
add .050 (1,27) for TD and D9 bushings,
add .090 (2,29) for H, H9, Y & Y9 bushings.
All actuators have chrome finish (except K).
Available with T & T9 bushings only.
Dress nut part number 709901201
supplied standard with threaded bushing.
K
LOCKING LEVER
Locking Positions
–01 & –02 Models
2 Position lock
–03 & –11 Models
3 Position lock
–08 Models
1 Position lock
K actuators have natural aluminum finish.
Not available with CF bushing option.
Bushing option code not required. Not available with TX05 & TX07 models.
Keyway on right side. To prevent accidental actuation, toggles
must be lifted before being actuated. When released, toggles
again lock in place. Overtightening mounting nut may cause
actuator to bind.
BUSHING
H
H9
.220" HIGH THREADED, FLAT
.220" HIGH UNTHREADED, FLAT
Y
Y9
.220" HIGH THREADED, KEYWAY
.220" HIGH UNTHREADED, KEYWAY
T
T9
.310" HIGH THREADED, FLAT
.310" HIGH UNTHREADED, FLAT
Toggle
G
H standard with C, W & Z terminations.
H9 standard with A, AV & V3 terminations.
Dimensions are shown: Inch (mm)
Specifications and dimensions subject to change
G–39
www.ittcannon.com
C&K T Series
Subminiature Toggle Switches
BUSHING
TK
.310" HIGH THREADED, KEYWAY
TD
.260" HIGH THREADED, KEYWAY
CF
D9
.260" HIGH UNTHREADED, KEYWAY
SPLASHPROOF, .310" HIGH THREADED, FLAT
IP67 Degree of protection.
Internal o-ring actuator seal and
external bushing seal washer standard.
Not available with K locking lever option.
10-48 BUSHING
PANEL MOUNTING
With Standard Locking Ring
Without Locking Ring
Without Locking Ring
1/4 IN. BUSHING
Without Locking Ring
Without Locking Ring
With Small Locking Ring
With Standard Locking Ring
TERMINATIONS
Z
C
SOLDER LUG
PC THRU-HOLE
SP
SP
DP
DP
PC MOUNTING
T102 – omit center hole.
Not available with K, P, L or R contact materials.
W
WIRE WRAP
SP
DP
G
Toggle
Dimensions are shown: Inch (mm)
Specifications and dimensions subject to change
G–40
www.ittcannon.com
C&K T Series
Subminiature Toggle Switches
TERMINATIONS
A
RIGHT ANGLE, PC THRU-HOLE
PC MOUNTING
T101MH9ABE
Horizontal Actuation
Actuator Shown In Pos. 1
SPDT
Not available with T102 model.
A
RIGHT ANGLE, PC THRU-HOLE
PC MOUNTING
T201MH9ABE
Horizontal Actuation
DPDT
Actuator Shown In Pos. 1
AV
VERTICAL RIGHT ANGLE, PC THRU-HOLE
PC MOUNTING
T101MH9AVBE
Vertical Actuation
Actuator Shown In Pos. 1
SPDT
T102 Models: Omit terminal 2
NOTE: Terminal bend radii and lead-in manufacturing option.
AV
VERTICAL RIGHT ANGLE, PC THRU-HOLE
PC MOUNTING
Actuator Shown
In Pos. 1
T201MH9AVBE
Vertical Actuation
DPDT
NOTE: Terminal bend radii and lead-in manufacturing option.
V3
VERTICAL MOUNT, V-BRACKET
PC MOUNTING
Toggle
G
Actuator Shown
In Pos. 1
T101MH9V3BE
T102 Models:
Omit center hole.
SPDT
T102 Models:
Omit terminal 2
Dimensions are shown: Inch (mm)
Specifications and dimensions subject to change
G–41
www.ittcannon.com
C&K T Series
Subminiature Toggle Switches
TERMINATIONS
V3
VERTICAL MOUNT, V-BRACKET
PC MOUNTING
T201MH9V3BE
DPDT
Actuator Shown In Pos. 1
CONTACT MATERIAL
OPTION
CODE
RoHS
RoHS
COMPLIANT COMPATIBLE
B
K
P
YES
YES
NO
YES
YES
YES
Q
YES
YES
G
L
R
YES
YES
NO
YES
YES
YES
CONTACT
MATERIAL
TERMINAL
PLATING
RATINGS
GOLD 1
GOLD 1
TIN-LEAD 6
MATTE-TIN
7
SILVER 5
SILVER 4,5
GOLD 3
GOLD OVER
SILVER
TIN-LEAD 6
2,3
LOW LEVEL/
0.4 VA MAX. @ 20 V AC OR DC MAX.
DRY CIRCUIT
TX01 MODELS: 3 AMPS @ 120 V AC OR 28 V DC.
ALL OTHER MODELS: 2 AMPS @ 120 V AC OR 28 V DC.
POWER
LOW LEVEL/DRY
CIRCUIT OR POWER
MATTE-TIN 7
TX01 MODELS: 0.4 VA MAX @ 20 V AC OR DC MAX. OR
3 AMPS @ 120 V AC OR 28 V DC.
ALL OTHER MODELS: 0.4 VA MAX @ 20 V AC OR DC MAX.
OR 2 AMPS @ 120 V AC OR 28 V DC.
* Note: See Technical Data section of this catalog for RoHS compliant and compatible definitions and specifications.
1
CONTACTS & TERMINALS: Copper alloy, with gold plate over nickel plate.
NOTE: Any models supplied with P, R, Q, B or G contact material are RoHS compliant. For
the latest information regarding RoHS compliance, please go to: www.ittcannon.com/rohs.
2
END CONTACTS: Coin silver, with gold plate over nickel plate.
3
CENTER CONTACTS & ALL TERMINALS: Copper alloy, with gold plate
over nickel plate.
All models
4
END CONTACTS: Coin silver, silver plated.
Q contact material standard with C & Z terminations.
5
CENTER CONTACT & ALL TERMINALS: Copper alloy, silver plated.
6
TERMINALS: Copper alloy, with tin-lead alloy over nickel plate.
7
TERMINALS: Copper alloy, with matte-tin over nickel plate.
with all options when ordered with R, G, L or Q contact material.
B contact material standard with A, AV, V3 & W terminations.
SEAL
E
EPOXY SEAL
G
Toggle
Dimensions are shown: Inch (mm)
Specifications and dimensions subject to change
G–42
www.ittcannon.com