TC7WG74FC TOSHIBA CMOS Digital Integrated Circuit Silicon Monolithic TC7WG74FC D-Type Flip Flop with Preset and Clear Features TC7WG74FC • High-speed • High-level output current: : IOH/IOL = ±8 mA (min) at VCC = 3 V • Operation voltage range • 5.5-V tolerant inputs • 3.6-V power down protection outputs : fMAX = 246 MHz (Typ.) at VCC = 3 V, CL=15pF : VCC(opr)=0.9~3.6V CSON8-P-0.4 Weight: 0.002g (typ.) Absolute Maximum Ratings ( Ta = 25°C ) Characteristics Marking Symbol Value Unit Power supply voltage VCC −0.5~4.6 V DC input voltage VIN −0.5~7.0 V DC output voltage VOUT −0.5~4.6 (Note 1) −0.5~VCC + 0.5 (Note 2) IIK −20 Output diode current IOK −20 mA DC output current IOUT ±25 mA DC VCC/GND current ICC ±100 mA Power dissipation PD 150 Storage temperature Tstg −65~150 (Note 4) G74 V Input diode current (Note 3) mA Pin Assignment (top view) Vcc PR CLR Q 8 7 6 5 mW °C Note: Using continuously under heavy loads (e.g. the application of high temperature/current/voltage and the significant change in temperature, etc.) may cause this product to decrease in the reliability significantly even if the operating conditions (i.e. operating temperature/current/voltage, etc.) are within the absolute maximum ratings and the operating ranges. Please design the appropriate reliability upon reviewing the Toshiba Semiconductor Reliability Handbook (“Handling Precautions”/Derating Concept and Methods) and individual reliability data (i.e. reliability test report and estimated failure rate, etc). Note 1: VCC = 0V Note 2: High or Low State. IOUT absolute maximum rating must be observed. Note 3: VOUT < GND Note 4: Mounted on an FR4 board. 2 (25.4 mm × 25.4 mm × 1.6 t, Cu Pad: 11.56 mm ) 1 Product name CK CLR Q D PR Q 1 2 3 4 CK D Q GND 2007-11-01 TC7WG74FC Truth Table IEC Logic Symbol Inputs CLR PR Outputs D CK Q Q Function L H X X L H Clear H L X X H L Preset L L X X H H ⎯ H H L L H ⎯ H H H H L ⎯ H H X Qn Qn No Change PR S CK C D D CLR R Q Q X : Don’t Care 2 2007-11-01 TC7WG74FC Operating Ranges Characteristics Symbol Value Unit Power supply voltage VCC 0.9~3.6 V Input voltage VIN 0~5.5 V Output voltage Output Current VOUT IOH/IOL 0~3.6 (Note 5) 0~VCC (Note 6) ±8.0 (Note 7) ±4.0 (Note 8) ±3.0 (Note 9) ±1.7 (Note 10) ±0.3 (Note 11) ±0.02 (Note 12) Operating temperature Topr −40~85 Input rise and fall time dt/dV 0~10 V mA °C (Note 13) ns/V Note 5: VCC = 0V Note 6: High or Low state. Note 7: VCC = 3.0~3.6 V Note 8: VCC = 2.3~2.7 V Note 9: VCC = 1.65~1.95 V Note 10: VCC = 1.4~1.6 V Note 11: VCC = 1.1~1.3 V Note 12: VCC = 0.9 V Note 13: VIN = 0.8~2.0 V, VCC = 3.0 V 3 2007-11-01 TC7WG74FC DC Electrical Characteristics Characteristics High-level input voltage Low-level input voltage High-level output voltage Low-level output voltage Input leakage current Symbol Test Condition ⎯ VIH Ta = 25°C VCC (V) Min Typ. Max Min Max 0.9 VCC ⎯ ⎯ VCC ⎯ 1.1~1.3 VCC × 0.7 ⎯ ⎯ VCC × 0.7 ⎯ 1.4~1.6 VCC × 0.65 ⎯ ⎯ VCC × 0.65 ⎯ ⎯ ⎯ VCC × 0.65 ⎯ VCC 1.65~1.95 × 0.65 ⎯ VIL VOH VOL IIN VIN = VIH or VIL VIN = VIH or VIL Ta = −40~85°C V 2.3~2.7 1.7 ⎯ ⎯ 1.7 ⎯ 3.0~3.6 2.0 ⎯ ⎯ 2.0 ⎯ 0.9 ⎯ ⎯ GND ⎯ GND 1.1~1.3 ⎯ ⎯ VCC × 0.3 ⎯ VCC × 0.3 1.4~1.6 ⎯ ⎯ VCC × 0.35 ⎯ VCC × 0.35 ⎯ VCC × 0.35 1.65~1.95 ⎯ ⎯ VCC × 0.35 Unit V 2.3~2.7 ⎯ ⎯ 0.7 0.7 3.0~3.6 ⎯ ⎯ 0.8 0.8 IOH =−0.02 mA 0.9 0.75 ⎯ ⎯ 0.75 ⎯ IOH = −0.3 mA 1.1~1.3 VCC × 0.75 ⎯ ⎯ VCC × 0.75 ⎯ IOH = −1.7 mA 1.4~1.6 VCC × 0.75 ⎯ ⎯ VCC × 0.75 ⎯ IOH = −3.0 mA 1.65~ 1.95 VCC -0.45 ⎯ ⎯ VCC -0.45 ⎯ IOH = −4.0 mA 2.3~2.7 2.0 ⎯ ⎯ 2.0 ⎯ IOH = −8.0 mA 3.0~3.6 2.48 ⎯ ⎯ 2.48 ⎯ IOL = 0.02 mA 0.9 ⎯ ⎯ 0.1 ⎯ 0.1 IOL = 0.3 mA 1.1~1.3 ⎯ ⎯ VCC × 0.25 ⎯ VCC × 0.25 IOL = 1.7 mA 1.4~1.6 ⎯ ⎯ VCC × 0.25 ⎯ VCC × 0.25 IOL = 3.0 mA 1.65~ 1.95 ⎯ ⎯ 0.45 ⎯ 0.45 IOL = 4.0 mA 2.3~2.7 ⎯ ⎯ 0.4 ⎯ 0.4 IOL = 8.0 mA 3.0~3.6 ⎯ ⎯ 0.4 ⎯ 0.4 0~3.6 ⎯ ⎯ ±0.1 ⎯ ±1.0 μA VIN = 0~5.5V V V Power off leakage current IOFF VIN = 0~5.5V VOUT = 0~3.6V 0.0 ⎯ ⎯ 1.0 ⎯ 10.0 μA Quiescent supply current ICC VIN = VCC or GND 3.6 ⎯ ⎯ 1.0 ⎯ 10.0 μΑ 4 2007-11-01 TC7WG74FC Timing Requirements ( Input : tr = tf = 3 ns ) Characteristic Pulse width ( CK ) Symbol Test condision VCC (V) Min. Typ. Max. Min. Max. 0.9 ⎯ 26.4 ⎯ ⎯ ⎯ 1.1~1.3 12.4 ⎯ ⎯ 22.7 ⎯ tW(L) 1.4~1.6 5.5 ⎯ ⎯ 6.7 ⎯ tW(H) 1.65~ 1.95 4.3 ⎯ ⎯ 4.7 ⎯ 2.3~2.7 3.5 ⎯ ⎯ 3.5 ⎯ 3.0~3.6 3.2 ⎯ ⎯ 3.2 ⎯ 0.9 ⎯ 22.8 ⎯ ⎯ ⎯ 1.1~1.3 11.6 ⎯ ⎯ 20.4 ⎯ 1.4~1.6 5.3 ⎯ ⎯ 6.5 ⎯ 1.65~ 1.95 4.2 ⎯ ⎯ 4.6 ⎯ 2.3~2.7 3.3 ⎯ ⎯ 3.3 ⎯ 3.0~3.6 3.2 ⎯ ⎯ 3.2 ⎯ 0.9 ⎯ 31.9 ⎯ ⎯ ⎯ 1.1~1.3 14.4 ⎯ ⎯ 21.7 ⎯ 1.4~1.6 6.4 ⎯ ⎯ 7.2 ⎯ 1.65~ 1.95 4.4 ⎯ ⎯ 4.8 ⎯ 2.3~2.7 Pulse width ( CLR , PR ) Set-up time Hold time tW(L) ts th Removal time ( CLR , PR ) Ta = −40~85°C Ta = 25°C trem 5 2.5 ⎯ ⎯ 2.9 ⎯ 3.0~3.6 1.9 ⎯ ⎯ 2.3 ⎯ 0.9 ⎯ 0.5 ⎯ ⎯ ⎯ 1.1~1.3 0.1 ⎯ ⎯ 0.1 ⎯ 1.4~1.6 0.1 ⎯ ⎯ 0.1 ⎯ 1.65~ 1.95 0.1 ⎯ ⎯ 0.1 ⎯ 2.3~2.7 0.1 ⎯ ⎯ 0.1 ⎯ 3.0~3.6 0.1 ⎯ ⎯ 0.1 ⎯ 0.9 ⎯ 17.9 ⎯ ⎯ ⎯ 1.1~1.3 8.6 ⎯ ⎯ 13 ⎯ 1.4~1.6 3.9 ⎯ ⎯ 4.4 ⎯ 1.65~ 1.95 2.6 ⎯ ⎯ 3.1 ⎯ 2.3~2.7 1.5 ⎯ ⎯ 1.9 ⎯ 3.0~3.6 1.2 ⎯ ⎯ 1.5 ⎯ Unit ns 2007-11-01 TC7WG74FC AC Electrical Characteristics ( Input : tr = tf = 3 ns ) Test condition Characteristic Symbol CL = 10 pF Propagation deley time ( CK – Q , Q ) tpLH tpHL CL = 15 pF CL = 30 pF CL = 10 pF Propagation deley time ( CLR , PR – Q , Q ) tpLH tpHL CL = 15 pF CL = 30 pF 6 Ta = −40~85°C Ta = 25°C VCC (V) Min. Typ. Max. Min. Max. 0.9 ⎯ 36.6 ⎯ 1.0 ⎯ 1.1~1.3 ⎯ 15.7 23.2 1.0 34.6 8.0 10.5 1.0 11.5 7.4 1.0 7.9 4.7 1.0 5.1 4.2 1.4~1.6 ⎯ 1.65~1.95 ⎯ 2.3~2.7 ⎯ 3.0~3.6 ⎯ 3.0 3.8 1.0 0.9 ⎯ 40.8 ⎯ 1.0 ⎯ 1.1~1.3 ⎯ 17.1 25.3 1.0 38.5 1.4~1.6 ⎯ 8.8 11.5 1.0 12.7 1.65~1.95 ⎯ 6.4 8.1 1.0 8.6 2.3~2.7 ⎯ 4.1 5.1 1.0 5.5 3.0~3.6 ⎯ 3.3 4.1 1.0 4.5 0.9 ⎯ 54.8 ⎯ 1.0 ⎯ 1.1~1.3 ⎯ 22.6 34.7 1.0 54.4 1.4~1.6 ⎯ 11.4 15.0 1.0 16.8 1.65~1.95 ⎯ 8.2 10.3 1.0 10.8 2.3~2.7 ⎯ 5.2 6.3 1.0 6.6 3.0~3.6 ⎯ 4.1 5.0 1.0 5.3 0.9 ⎯ 46.9 ⎯ 1.0 ⎯ 1.1~1.3 ⎯ 18.8 27.8 1.0 45.2 1.4~1.6 ⎯ 9.5 12.4 1.0 14.0 1.65~1.95 ⎯ 6.9 8.7 1.0 9.1 2.3~2.7 ⎯ 5.3 1.0 5.7 3.0~3.6 ⎯ 3.3 4.2 1.0 4.6 0.9 ⎯ 50.1 ⎯ 1.0 ⎯ 1.1~1.3 ⎯ 20.2 29.8 1.0 49.4 1.4~1.6 ⎯ 10.1 13.2 1.0 15.1 1.65~1.95 ⎯ 7.3 9.2 1.0 9.7 2.3~2.7 ⎯ 4.5 5.6 1.0 6.2 3.0~3.6 ⎯ 3.6 4.5 1.0 4.9 0.9 ⎯ 64.4 ⎯ 1.0 ⎯ 1.1~1.3 ⎯ 25.6 39.2 1.0 64.6 1.4~1.6 ⎯ 12.6 16.8 1.0 19.1 1.65~1.95 ⎯ 9.0 11.3 1.0 11.8 2.3~2.7 ⎯ 5.6 6.8 1.0 7.1 3.0~3.6 ⎯ 4.4 5.3 1.0 5.6 5.9 3.8 4.3 Unit ns ns 2007-11-01 TC7WG74FC AC Electrical Characteristics ( Input : tr = tf = 3 ns ) Test condition Characteristic Symbol CL = 10 pF Clock frequency fMAX CL = 15 pF CL = 30 pF Input capacitance CIN Power dissipation capacitanse CPD ⎯ (Note 14) Ta = −40~85°C Ta = 25°C VCC (V) Min. Typ. Max. Min. Max. 0.9 ⎯ 14 ⎯ ⎯ ⎯ 1.1~1.3 22 35 ⎯ 14 ⎯ 1.4~1.6 57 75 ⎯ 51 ⎯ 1.65~1.95 90 111 ⎯ 84 ⎯ 2.3~2.7 169 194 ⎯ 145 ⎯ 3.0~3.6 233 254 ⎯ 200 ⎯ 0.9 ⎯ 13 ⎯ ⎯ ⎯ 1.1~1.3 20 32 ⎯ 13 ⎯ 1.4~1.6 59 74 ⎯ 48 ⎯ 1.65~1.95 84 104 ⎯ 80 ⎯ 2.3~2.7 156 179 ⎯ 139 ⎯ 189 ⎯ Unit MHZ 3.0~3.6 225 246 ⎯ 0.9 ⎯ 14 ⎯ ⎯ ⎯ 1.1~1.3 17 30 ⎯ 11 ⎯ 1.4~1.6 45 63 ⎯ 39 ⎯ 1.65~1.95 71 91 ⎯ 68 ⎯ 2.3~2.7 135 159 ⎯ 120 ⎯ 3.0~3.6 189 214 ⎯ 163 ⎯ 3.6 ⎯ 3 ⎯ ⎯ ⎯ pF 0.9~3.6 ⎯ 14 ⎯ ⎯ ⎯ pF Note 14 : CPD is defined as the value of the internal equivalent capacitance which is calculated from the operating current consumption without load. Average operating current can be obtained by the equation: ICC (opr.) = CPD・VCC・fIN + ICC 7 2007-11-01 TC7WG74FC Package Dimensions Weight : 0.002 g (Typ.) 8 2007-11-01 TC7WG74FC RESTRICTIONS ON PRODUCT USE 20070701-EN GENERAL • The information contained herein is subject to change without notice. • TOSHIBA is continually working to improve the quality and reliability of its products. Nevertheless, semiconductor devices in general can malfunction or fail due to their inherent electrical sensitivity and vulnerability to physical stress. It is the responsibility of the buyer, when utilizing TOSHIBA products, to comply with the standards of safety in making a safe design for the entire system, and to avoid situations in which a malfunction or failure of such TOSHIBA products could cause loss of human life, bodily injury or damage to property. In developing your designs, please ensure that TOSHIBA products are used within specified operating ranges as set forth in the most recent TOSHIBA products specifications. Also, please keep in mind the precautions and conditions set forth in the “Handling Guide for Semiconductor Devices,” or “TOSHIBA Semiconductor Reliability Handbook” etc. • The TOSHIBA products listed in this document are intended for usage in general electronics applications (computer, personal equipment, office equipment, measuring equipment, industrial robotics, domestic appliances, etc.).These TOSHIBA products are neither intended nor warranted for usage in equipment that requires extraordinarily high quality and/or reliability or a malfunction or failure of which may cause loss of human life or bodily injury (“Unintended Usage”). Unintended Usage include atomic energy control instruments, airplane or spaceship instruments, transportation instruments, traffic signal instruments, combustion control instruments, medical instruments, all types of safety devices, etc.. Unintended Usage of TOSHIBA products listed in his document shall be made at the customer’s own risk. • The products described in this document shall not be used or embedded to any downstream products of which manufacture, use and/or sale are prohibited under any applicable laws and regulations. • The information contained herein is presented only as a guide for the applications of our products. No responsibility is assumed by TOSHIBA for any infringements of patents or other rights of the third parties which may result from its use. No license is granted by implication or otherwise under any patents or other rights of TOSHIBA or the third parties. • Please contact your sales representative for product-by-product details in this document regarding RoHS compatibility. Please use these products in this document in compliance with all applicable laws and regulations that regulate the inclusion or use of controlled substances. Toshiba assumes no liability for damage or losses occurring as a result of noncompliance with applicable laws and regulations. 9 2007-11-01