TOSHIBA TC7WGU04FU

TC7WGU04FU/FK
TOSHIBA CMOS Digital Integrated Circuit
Silicon Monolithic
TC7WGU04FU,TC7WGU04FK
Triple Inverter (Un-Buffer)
Features
•
High-level output current:
•
High-speed operation: tpd = 1.9 ns (typ.)
at VCC = 3.3 V,15pF
•
Operating voltage range: VCC = 0.9~3.6 V
•
3.6-V tolerant inputs
IOH/IOL = ±8 mA (min)
at VCC = 3 V
TC7WG04FU
TC7WG04FK
Marking
SM8
G U04
Product name
Lot. No
US8
Weight
SSOP8-P-0.65 : 0.02 g (typ.)
SSOP8-P-0.50A : 0.01 g (typ.)
WG
U04
Pin Assignment (top view)
Absolute Maximum Ratings (Ta = 25°C)
Characteristics
Symbol
Value
Unit
Power supply voltage
VCC
−0.5~4.6
V
DC input voltage
VIN
−0.5~4.6
V
−0.5~VCC + 0.5
DC output voltage
VOUT
V
Input diode current
IIK
−20
mA
Output diode current
IOK
−20 (Note 1)
mA
DC output current
IOUT
±25
mA
DC VCC / ground current
ICC
±50
mA
Power dissipation
PD
300 (SM8)
200 (US8)
mW
Storage temperature
Tstg
−65~150
°C
1A 1
8 VCC
3Y 2
7 1Y
2A 3
6 3A
GND 4
5 2Y
Note:
Using continuously under heavy loads (e.g. the application of high temperature/current/voltage and the
significant change in temperature, etc.) may cause this product to decrease in the reliability significantly even
if the operating conditions (i.e. operating temperature/current/voltage, etc.) are within the absolute maximum
ratings and the operating ranges.
Please design the appropriate reliability upon reviewing the Toshiba Semiconductor Reliability Handbook
(“Handling Precautions”/Derating Concept and Methods) and individual reliability data (i.e. reliability test report
and estimated failure rate, etc).
Note 1: VOUT<GND, VOUT>VCC
1
2007-11-01
TC7WGU04FU/FK
IEC Logic Symbol
1A
2A
3A
(1)
Truth Table
1
(7)
(3)
(5)
(6)
(2)
1Y
A
Y
2Y
L
H
H
L
3Y
Operating Ranges
Characteristics
Symbol
Value
Unit
Power supply voltage
VCC
0.9~3.6
V
Input voltage
VIN
0~3.6
V
VOUT
0~VCC
V
Output voltage
Output Current
Operating temperature
IOH/IOL
±8.0
(Note 2)
±4.0
(Note 3)
±3.0
(Note 4)
±1.7
(Note 5)
±0.3
(Note 6)
±0.02
(Note 7)
−40~85
Topr
mA
°C
Note 2: VCC = 3.0~3.6 V
Note 3: VCC = 2.3~2.7 V
Note 4: VCC = 1.65~1.95 V
Note 5: VCC = 1.4~1.6 V
Note 6: VCC = 1.1~1.3 V
Note 7: VCC = 0.9 V
2
2007-11-01
TC7WGU04FU/FK
Electrical Characteristics
DC Electrical Characteristics
Characteristics
High-level input
voltage
Low-level
input voltage
Symbol
Test Condition
⎯
VIH
Ta = 25°C
VCC (V)
Min
Typ.
Max
Min
Max
0.9
VCC
⎯
⎯
VCC
⎯
1.1~1.3
VCC
× 0.7
⎯
⎯
VCC
× 0.7
⎯
1.4~1.6
VCC
× 0.65
⎯
⎯
VCC
× 0.65
⎯
⎯
⎯
VCC
× 0.65
⎯
VCC
1.65~1.95
× 0.65
⎯
VIL
2.3~2.7
1.7
⎯
⎯
1.7
⎯
3.0~3.6
2.0
⎯
⎯
2.0
⎯
0.9
⎯
⎯
GND
⎯
GND
1.1~1.3
⎯
⎯
VCC
× 0.3
⎯
VCC
× 0.3
1.4~1.6
⎯
⎯
VCC
× 0.35
⎯
VCC
× 0.35
⎯
VCC
× 0.35
⎯
VCC
× 0.35
1.65~1.95
VIN = VIL
High-level
output voltage
VOH
VIN=GND
VIN = VIH
Low-level
output voltage
VOL
VIN= VCC
Ta = −40~85°C
⎯
Unit
V
V
2.3~2.7
⎯
⎯
0.7
0.7
3.0~3.6
⎯
⎯
0.8
0.8
IOH =−0.02 mA
0.9
0.75
⎯
⎯
0.75
⎯
IOH = −0.3 mA
1.1~1.3
VCC
× 0.75
⎯
⎯
VCC
× 0.75
⎯
IOH = −1.7 mA
1.4~1.6
VCC
× 0.75
⎯
⎯
VCC
× 0.75
⎯
IOH = −3.0 mA
1.65~
1.95
VCC
-0.45
⎯
⎯
VCC
-0.45
⎯
IOH = −4.0 mA
2.3~2.7
2.0
⎯
⎯
2.0
⎯
IOH = −8.0 mA
3.0~3.6
2.48
⎯
⎯
2.48
⎯
IOL = 0.02 mA
0.9
⎯
⎯
0.1
⎯
0.1
IOL = 0.3 mA
1.1~1.3
⎯
⎯
VCC
× 0.25
⎯
VCC
× 0.25
IOL = 1.7 mA
1.4~1.6
⎯
⎯
VCC
× 0.25
⎯
VCC
× 0.25
IOL = 3.0 mA
1.65~
1.95
⎯
⎯
0.45
⎯
0.45
IOL = 4.0 mA
2.3~2.7
⎯
⎯
0.4
⎯
0.4
IOL = 8.0 mA
3.0~3.6
⎯
⎯
0.4
⎯
0.4
0~3.6
⎯
⎯
±0.1
⎯
±1.0
μA
3.6
⎯
⎯
1.0
⎯
10.0
μΑ
Input leakage
current
IIN
VIN = 0~3.6 V
Quiescent
supply current
ICC
VIN = VCC or GND
3
V
V
2007-11-01
TC7WGU04FU/FK
AC Electrical Characteristics (input tr = tf = 3 ns)
Characteristics
Symbol
CL = 10 pF,
RL = 1 MΩ
Propagation delay time
tpLH
tpHL
CL = 15 pF,
RL = 1 MΩ
CL = 30 pF,
RL = 1 MΩ
Input capacitance
CIN
Power dissipation capacitance
CPD
Ta = 25°C
Test Condition
⎯
(Note 8)
Ta = −40~85°C
Unit
VCC (V)
Min
Typ.
Max
Min
Max
0.9
⎯
15.0
⎯
⎯
⎯
1.1~1.3
⎯
6.0
18.4
1.0
34.2
1.4~1.6
⎯
3.2
8.5
1.0
10.0
1.65~ 1.95
⎯
2.6
6.2
1.0
6.7
2.3~2.7
⎯
2.0
3.9
1.0
4.4
3.0~3.6
⎯
1.7
3.1
1.0
3.7
0.9
⎯
18.8
⎯
⎯
⎯
1.1~1.3
⎯
7.0
21.5
1.0
37.2
1.4~1.6
⎯
3.5
9.3
1.0
11.2
1.65~ 1.95
⎯
3.0
6.9
1.0
7.1
2.3~2.7
⎯
2.3
4.4
1.0
5.0
3.0~3.6
⎯
1.9
3.4
1.0
3.9
0.9
⎯
33.0
⎯
⎯
⎯
1.1~1.3
⎯
12.0
30.4
1.0
58.0
1.4~1.6
⎯
6.0
13.1
1.0
15.9
1.65~ 1.95
⎯
4.5
9.2
1.0
9.6
2.3~2.7
⎯
3.2
5.7
1.0
6.1
3.0~3.6
⎯
2.5
4.4
1.0
4.8
3.6
⎯
3
⎯
⎯
⎯
pF
0.9 ~ 3.6
⎯
10
⎯
⎯
⎯
pF
ns
Note 8: CPD is defined as the value of the internal equivalent capacitance which is calculated from the operating
current consumption without load.
Average operating current can be obtained by the equation:
ICC (opr.) = CPD・VCC・fIN + ICC/3
4
2007-11-01
TC7WGU04FU/FK
Package Dimensions
Weight: 0.02 g (typ.)
5
2007-11-01
TC7WGU04FU/FK
Package Dimensions
Weight: 0.01 g (typ.)
6
2007-11-01
TC7WGU04FU/FK
RESTRICTIONS ON PRODUCT USE
20070701-EN GENERAL
• The information contained herein is subject to change without notice.
• TOSHIBA is continually working to improve the quality and reliability of its products. Nevertheless, semiconductor
devices in general can malfunction or fail due to their inherent electrical sensitivity and vulnerability to physical
stress. It is the responsibility of the buyer, when utilizing TOSHIBA products, to comply with the standards of
safety in making a safe design for the entire system, and to avoid situations in which a malfunction or failure of
such TOSHIBA products could cause loss of human life, bodily injury or damage to property.
In developing your designs, please ensure that TOSHIBA products are used within specified operating ranges as
set forth in the most recent TOSHIBA products specifications. Also, please keep in mind the precautions and
conditions set forth in the “Handling Guide for Semiconductor Devices,” or “TOSHIBA Semiconductor Reliability
Handbook” etc.
• The TOSHIBA products listed in this document are intended for usage in general electronics applications
(computer, personal equipment, office equipment, measuring equipment, industrial robotics, domestic appliances,
etc.).These TOSHIBA products are neither intended nor warranted for usage in equipment that requires
extraordinarily high quality and/or reliability or a malfunction or failure of which may cause loss of human life or
bodily injury (“Unintended Usage”). Unintended Usage include atomic energy control instruments, airplane or
spaceship instruments, transportation instruments, traffic signal instruments, combustion control instruments,
medical instruments, all types of safety devices, etc.. Unintended Usage of TOSHIBA products listed in his
document shall be made at the customer’s own risk.
• The products described in this document shall not be used or embedded to any downstream products of which
manufacture, use and/or sale are prohibited under any applicable laws and regulations.
• The information contained herein is presented only as a guide for the applications of our products. No
responsibility is assumed by TOSHIBA for any infringements of patents or other rights of the third parties which
may result from its use. No license is granted by implication or otherwise under any patents or other rights of
TOSHIBA or the third parties.
• Please contact your sales representative for product-by-product details in this document regarding RoHS
compatibility. Please use these products in this document in compliance with all applicable laws and regulations
that regulate the inclusion or use of controlled substances. Toshiba assumes no liability for damage or losses
occurring as a result of noncompliance with applicable laws and regulations.
7
2007-11-01