TC7WZ38FU/FK TOSHIBA CMOS Digital Integrated Circuit Silicon Monolithic TC7WZ38FU,TC7WZ38FK Dual 2 Input NAND Gate (Open Drain) Features • High output drive: ±24 mA (min) at VCC = 3 V • Super high speed operation: tpZL = 2.2 ns (typ.) • Operation voltage range: VCC (opr) = 1.65~5.5 V • 5.5-V tolerant inputs • 5.5-V power down protection outputs • Matches the performance of TC74LCX series when operated at 3.3-V VCC at TC7WZ38FU V CC = 5 V, 50 pF TC7WZ38FK Marking SM8 US8 Type name Z 38 Lot No. WZ 38 Weight SSOP8-P-0.65 SSOP8-P-0.50A : 0.02 g (typ.) : 0.01 g (typ.) Absolute Maximum Ratings (Ta = 25°C) Characteristics Symbol Rating Unit Power supply voltage VCC −0.5~6 V DC input voltage VIN −0.5~6 V DC output voltage VOUT −0.5~6 V Input diode current IIK −20 mA Output diode current IOK −20 mA DC output current IOUT 50 mA DC VCC/ground current ICC ±50 mA Power dissipation PD 300 (SM8) 200 (US8) mW Storage temperature Tstg −65~150 °C TL 260 °C Lead temperature (10s) Note: Pin Assignment (top view) 1A 1 8 VCC 1B 2 7 1Y 2Y 3 6 2B GND 4 5 2A Using continuously under heavy loads (e.g. the application of high temperature/current/voltage and the significant change in temperature, etc.) may cause this product to decrease in the reliability significantly even if the operating conditions (i.e. operating temperature/current/voltage, etc.) are within the absolute maximum ratings and the operating ranges. Please design the appropriate reliability upon reviewing the Toshiba Semiconductor Reliability Handbook (“Handling Precautions”/Derating Concept and Methods) and individual reliability data (i.e. reliability test report and estimated failure rate, etc). 1 2007-11-01 TC7WZ38FU/FK Truth Table Logic Diagram A B Y L L *H L H *H H L *H H H L IN A & OUT Y IN B * : High impedance Operating Ranges Characteristics Symbol Supply voltage VCC Input voltage VIN Output voltage Operating temperature Rating Unit 1.65~5.5 1.5~5.5 (Note 1) 0~5.5 VOUT V 0~5.5 (Note 2) 0~VCC (Note 3) −40~85 Topr V V °C 0~20 (VCC = 1.8 V ± 0.15 V, 2.5 V ± 0.2 V) Input rise and fall time dt/dv 0~10 (VCC = 3.3 V ± 0.3 V) ns/V 0~5 (VCC = 5.5 V ± 0.5 V) Note 1: Data retention only Note 2: VCC = 0 V Note 3: Low state 2 2007-11-01 TC7WZ38FU/FK Electrical Characteristics DC Characteristics Characteristics High level Symbol Ta = 25°C Test Condition VCC (V) Min Typ. Max Min Max 1.65~1.95 0.75 × VCC ⎯ ⎯ 0.75 × VCC ⎯ 2.3~5.5 0.7 × VCC ⎯ ⎯ 0.7 × VCC ⎯ 1.65~1.95 ⎯ ⎯ 0.25 × VCC ⎯ 0.25 × VCC 2.3~5.5 ⎯ ⎯ 0.3 × VCC ⎯ 0.3 × VCC 1.65 ⎯ 0 0.1 ⎯ 0.1 2.3 ⎯ 0 0.1 ⎯ 0.1 3.0 ⎯ 0 0.1 ⎯ 0.1 4.5 ⎯ 0 0.1 ⎯ 0.1 IOL = 4 mA 1.65 ⎯ 0.08 0.24 ⎯ 0.24 IOL = 8 mA 2.3 ⎯ 0.1 0.3 ⎯ 0.3 IOL = 16 mA 3.0 ⎯ 0.15 0.4 ⎯ 0.4 IOL = 24 mA 3.0 ⎯ 0.22 0.55 ⎯ 0.55 IOL = 32 mA 4.5 ⎯ 0.22 0.55 ⎯ 0.55 ⎯ VIH Input voltage Low level ⎯ VIL IOL = 100 μA Output voltage Low level VOL VIN = VIH Ta = −40~85°C Unit V V Input leakage current IIN VIN = 5.5 V or GND 0~5.5 ⎯ ⎯ ±1 ⎯ ±10 μA Off-state carent IOZ VIN = VIL VOUT = VCC or GND 5.5 ⎯ ⎯ ±5 ⎯ ±10 μA Power off leakage current IOFF VIN or VOUT = 5.5 V 0.0 ⎯ ⎯ 1 ⎯ 10 μA Quiescent supply current ICC VIN = 5.5 V or GND 1.65~5.5 ⎯ ⎯ 1 ⎯ 10 μA 3 2007-11-01 TC7WZ38FU/FK AC Characteristics (unless otherwise specified, Input: tr = tf = 3 ns) Characteristics Symbol tpZL Ta = 25°C Test Condition CL = 50 pF, RL = 500 Ω Propagation delay time tpLZ Input capacitance Output capacitance Power dissipation capacitance CL = 50 pF, RL = 500 Ω Ta = −40~85°C VCC (V) Min Typ. Max Min Max 1.8 ± 0.15 2.0 5.2 9.2 2.0 9.6 2.5 ± 0.2 1.5 3.5 5.7 1.5 6.1 3.3 ± 0.3 1.0 2.8 4.1 1.0 4.5 5.0 ± 0.5 0.5 2.2 3.4 0.5 3.6 1.8 ± 0.15 2.0 4.6 9.2 2.0 9.6 2.5 ± 0.2 1.5 3.2 5.7 1.5 6.1 3.3 ± 0.3 1.0 2.4 4.1 1.0 4.5 5.0 ± 0.5 0.5 1.6 3.4 0.5 3.6 Unit ns CIN ⎯ 0~5.5 ⎯ 3.0 ⎯ ⎯ ⎯ pF COUT ⎯ 0~5.5 ⎯ 2.5 ⎯ ⎯ ⎯ pF 3.3 ⎯ 6.9 ⎯ ⎯ ⎯ 5.5 ⎯ 13 ⎯ ⎯ ⎯ (Note 4) CPD pF Note 4: CPD is defined as the value of the internal equivalent capacitance which is calculated from the operating current consumption without load. Average operating current can be obtained by the equation: ICC (opr.) = CPD･VCC･fIN + ICC/2 Test Circuit AC Waveform tr 3 ns tf 3 ns VCC × 2 50% RL 50% 10% Input Output CL RL VCC 90% GND VOH Output 50% VOL + 0.3 V tpZL 4 VOL tpLZ 2007-11-01 TC7WZ38FU/FK Package Dimensions Weight: 0.02 g (typ.) 5 2007-11-01 TC7WZ38FU/FK Package Dimensions Weight: 0.01 g (typ.) 6 2007-11-01 TC7WZ38FU/FK RESTRICTIONS ON PRODUCT USE 20070701-EN GENERAL • The information contained herein is subject to change without notice. • TOSHIBA is continually working to improve the quality and reliability of its products. Nevertheless, semiconductor devices in general can malfunction or fail due to their inherent electrical sensitivity and vulnerability to physical stress. It is the responsibility of the buyer, when utilizing TOSHIBA products, to comply with the standards of safety in making a safe design for the entire system, and to avoid situations in which a malfunction or failure of such TOSHIBA products could cause loss of human life, bodily injury or damage to property. In developing your designs, please ensure that TOSHIBA products are used within specified operating ranges as set forth in the most recent TOSHIBA products specifications. Also, please keep in mind the precautions and conditions set forth in the “Handling Guide for Semiconductor Devices,” or “TOSHIBA Semiconductor Reliability Handbook” etc. • The TOSHIBA products listed in this document are intended for usage in general electronics applications (computer, personal equipment, office equipment, measuring equipment, industrial robotics, domestic appliances, etc.).These TOSHIBA products are neither intended nor warranted for usage in equipment that requires extraordinarily high quality and/or reliability or a malfunction or failure of which may cause loss of human life or bodily injury (“Unintended Usage”). Unintended Usage include atomic energy control instruments, airplane or spaceship instruments, transportation instruments, traffic signal instruments, combustion control instruments, medical instruments, all types of safety devices, etc.. Unintended Usage of TOSHIBA products listed in his document shall be made at the customer’s own risk. • The products described in this document shall not be used or embedded to any downstream products of which manufacture, use and/or sale are prohibited under any applicable laws and regulations. • The information contained herein is presented only as a guide for the applications of our products. No responsibility is assumed by TOSHIBA for any infringements of patents or other rights of the third parties which may result from its use. No license is granted by implication or otherwise under any patents or other rights of TOSHIBA or the third parties. • Please contact your sales representative for product-by-product details in this document regarding RoHS compatibility. Please use these products in this document in compliance with all applicable laws and regulations that regulate the inclusion or use of controlled substances. Toshiba assumes no liability for damage or losses occurring as a result of noncompliance with applicable laws and regulations. 7 2007-11-01