FEATURES • 6 WATTS MAXIMUM OUTPUT POWER • OUTPUT CURRENT UP TO 1200mA • PACKAGE, 1.61 x 1.02 x 0.33 INCH • HIGH EFFICIENCY UP TO 85% • 2:1 WIDE INPUT VOLTAGE RANGE • FIVE-SIDED SHIELD • SWITCHING FREQUENCY 100K TO 1500KHz. • NO EXTERNAL INPUT AND OUTPUT CAPACITOR NEEDED • LOW RIPPLE & NOISE • OVER CURRENT PROTECTION • SHORT CIRCUIT PROTECTION • LONG LIFE WITHOUT ELECTROLYTIC CAPACITOR • CE MARK MEETS 2006/95/EC, 93/68/EEC AND 2004/108/EC • DESIGN MEETS J60950-1, UL60950-1, EN60950-1 AND IEC60950-1 • ISO9001 CERTIFIED MANUFACTURING FACILITIES • COMPLIANT TO RoHS EU DIRECTIVE 2002/95/EC APPLICATIONS Wireless Network Telecom/Datacom Industry Control System Measurement Equipment Semiconductor Equipment DESCRIPTION The TEN06 series offer 6 watts of output power from a 1.61 x 1.02 x 0.33 inch package without derating to 50ºC and without external input/output capacitor. The TEN06 series with 2:1 wide input voltage of 4.5-9, 9-18, 18-36 and 36-75VDC and features 500VAC of isolation, short-circuit protection. T E C H N I C A L S P E C I F I C AT I O N All specifications are typical at nominal input, full load and 25ºC otherwise noted OUTPUT SPECIFICATIONS Maximum output power INPUT SPECIFICATIONS 6 Watts 5V nominal input 12V nominal input 24V nominal input 48V nominal input 4.5 – 9VDC 9 – 18VDC 18 – 36VDC 36 – 75VDC Voltage accuracy Full load and nominal Vin ± 1% Minimum load 0% Line regulation LL to HL at Full Load ± 0.2% Load regulation No load to Full load ± 0.5% Ripple and noise 50MHz bandwidth See table Maximum temperature drift ±0.02% / ºC Transient response recovery time 25% load step change 500μS, typ. Short circuit protection Continuous, automatics recovery Over current protection 150%, typ. Input voltage range OUTPUT VOLTAGE ADJUSTMENT TERMINAL(Vset ) (Note 6) ENVIRONMENTAL SPECIFICATIONS Model number XXS33 XXS05 XXS12 XXD12 Operating ambient temperature Open 3.3V 5V 12V ±12V Model number Open XXS33 XXS05 XXS12 XXD12 3.3V 5V 12V ±12V -Vout shorted 3.67V 6V 15V ±15V -Vout connected with resistance (7) 3.3 to 3.67V (8-1) 5 to 6V (8-3) 12 to 15V (8-5) ±12 to ±15V (8-6) +Vout shorted 2.84V 4.3V +Vout connected with resistance (7) 3.3 to 2.84V (8-2) 5 to 4.3V (8-4) - GENERAL SPECIFICATIONS Efficiency Isolation voltage Isolation resistance Isolation capacitance Safety standard pending Switching frequency Case material Base material Weight Dimension MTBF (Note 1) See table Input to Output Input (Output) to Case Input to Output Input (Output) to Case Input filter L-C filter Input surge voltage 100mS max 5V nominal input 12V nominal input 24V nominal input 48V nominal input 15VDC 36VDC 50VDC 100VDC Remote ON/OFF See figure 1 -25ºC ~ +85ºC (with derating) Maximum case temperature 100ºC Storage temperature range -55ºC ~ +105ºC Cooling Nature convection Thermal shock Vibration MIL-STD-810F At no operation, 10~55~10Hz (sweep for 15min.) amplitude 1.5mm constant (maximum 9G X, Y, Z 2hrs each) Operating humidity range 20% to 95% RH Storage humidity range 20% to 95% RH EMC CHARACTERISTICS 500 Vac EMI (Note 9) EN55022 Class A 500VDC 50M ohms 300 pF, max. IEC60950-1, J60950-1, UL60950-1, EN60950-1 Full load to No load 100K to 1500K Hz Metal case None 20.0g (0.71oz) 1.61 x 1.02 x 0.33 Inch (41 x 25.8 x 8.5 mm) 6 BELLCORE TR-NWT-000332 3.706 x 10 hrs 6 MIL-HDBK-217F 1.679 x 10 hrs Page 1 of 3 Issued Date：2008/01/25 Model Number Input Range TEN06-05S33 TEN06-05S05 TEN06-05S12 TEN06-05D12 TEN06-12S33 TEN06-12S05 TEN06-12S12 TEN06-12D12 TEN06-24S33 TEN06-24S05 TEN06-24S12 TEN06-24D12 TEN06-48S33 TEN06-48S05 TEN06-48S12 TEN06-48D12 4.5 – 9 VDC 4.5 – 9 VDC 4.5 – 9 VDC 4.5 – 9 VDC 9 – 18 VDC 9 – 18 VDC 9 – 18 VDC 9 – 18 VDC 18 – 36 VDC 18 – 36 VDC 18 – 36 VDC 18 – 36 VDC 36 – 75 VDC 36 – 75 VDC 36 – 75 VDC 36 – 75 VDC (2) Output Current Output Output Output Voltage Voltage Range Min. load Full load Ripple&Noise 3.3 VDC 5 VDC 12 VDC ±12 VDC 3.3 VDC 5 VDC 12 VDC ±12 VDC 3.3 VDC 5 VDC 12 VDC ±12 VDC 3.3 VDC 5 VDC 12 VDC ±12 VDC 2.84 – 3.67 VDC 4.3 – 6 VDC 12 – 15 VDC ±12 – ±15 VDC 2.84 – 3.67 VDC 4.3 – 6 VDC 12 – 15 VDC ±12 – ±15 VDC 2.84 – 3.67 VDC 4.3 – 6 VDC 12 – 15 VDC ±12 – ±15 VDC 2.84 – 3.67 VDC 4.3 – 6 VDC 12 – 15 VDC ±12 – ±15 VDC 0mA 0mA 0mA 0mA 0mA 0mA 0mA 0mA 0mA 0mA 0mA 0mA 0mA 0mA 0mA 0mA 1200mA 1000mA 500mA ±250mA 1500mA 1200mA 500mA ±250mA 1500mA 1200mA 500mA ±250mA 1500mA 1200mA 500mA ±250mA 100mVp-p 100mVp-p 100mVp-p 100mVp-p 100mVp-p 100mVp-p 100mVp-p 100mVp-p 100mVp-p 100mVp-p 100mVp-p 100mVp-p 100mVp-p 100mVp-p 100mVp-p 100mVp-p (4) Input Current (3) No Load 80mA 65mA 140mA 140mA 45mA 55mA 60mA 55mA 15mA 20mA 30mA 30mA 15mA 15mA 20mA 15mA (2) Full Load 1131mA 1370mA 1519mA 1519mA 573mA 658mA 617mA 617mA 286mA 321mA 309mA 309mA 143mA 165mA 155mA 155mA Eff (%) 74 77 83 83 76 80 85 85 77 82 85 85 77 80 85 85 (5) Capacitor Load max 6600μF 3000μF 1400μF ±510μF 6600μF 3000μF 1400μF ±510μF 6600μF 3000μF 1400μF ±510μF 6600μF 3000μF 1400μF ±510μF Note: 1. BELLCORE TR-NWT-000332. Case 1:50% Stress, temperature at 40ºC. MIL-HDBK-217F Notice2 @Ta=25 ºC, Full load(Ground, Benign, controlled environment). 2. Maximum value at nominal input voltage and full load. 3. Typical value at nominal input voltage and no load. 4. Typical value at nominal input voltage and full load. 5. Test by minimum Vin and constant resistive load. 6. The following output voltage can be obtained by connecting this terminal to an output + or – terminal. Unless the output voltage is adjusted, this terminal should be open. 7. In addition, the voltage can be adjusted not by shorting these terminals, but by connecting them to resistances as shown below. 8. Arithmetic expression connected resistance: R ( KΩ ) 8-1 Vo=(3.3*R+36.7)/(R+10) 8-2 Vo=(3.3*R+36.7)/(R+12.92) 8-3 Vo=2.5*[2+2.7/(R+6.8)] 8-4 Vo=2.5*[2-2.7/(R+9.5)] 8-5 Vo=2.5+9.5(R+10.9)/(R+8.2) [Between two outputs] 8-6 Vo=2.5+22*(R+12.7)/(R+10) [Between two outputs] Figure 1 OUTPUT POWER (%) 9. The TEN06 series can meet EN55022 Class A with parallel an external capacitor to the input pins. Recommend : 05Vin : 10μF/25V 1210 MLCC 12Vin : 4.7μF/25V 1210 MLCC 24Vin : 3.3μF/50V 1210 MLCC 48Vin : 1.5μF/100V 1812 MLCC TEN06-48S05 Derating Curve 120 100 80 60 40 20 0 -25 0 25 50 75 76 100 AMBIENT TEMPERATURE(℃) TEN06-48S05 Efficiency VS Input Voltage 83 EFFICIENCY(%) EFFICIENCY(%) 85 81 79 77 75 73 36 40 44 48 52 56 60 INPUT VOLTAGE (V) 64 68 72 95 90 85 80 75 70 65 60 55 50 45 TEN06-48S05 Efficiency VS Output Load 10 20 30 40 50 60 70 80 90 100 OUTPUT LOAD (% of Full Load) Page 2 of 3 Issued Date：2008/01/25 Recommended Filter for EN55022 Class B Compliance The components used in the above figure, together with the manufacturers’ part numbers for these components, are as follows: C1 1. All dimensions in Inches (mm) Tolerance: X.XX±0.02 (X.X±0.5) X.XXX±0.01 (X.XX±0.25) 2. Pin pitch tolerance ±0.01(0.25) 3. Pin dimension tolerance ±0.004 (0.1) PIN CONNECTION PIN SINGLE DUAL 1 2 3 4 5 6 7 8 9 10 11 + INPUT CTRL - INPUT NC - OUTPUT Vset + OUTPUT CASE CASE CASE STAND OFF CASE STAND OFF + INPUT CTRL - INPUT - OUTPUT COMMON Vset + OUTPUT CASE CASE CASE STAND OFF CASE STAND OFF EXTERNAL OUTPUT TRIMMING Output voltage setting can be externally trimmed by using the method shown below. ( ) for dual output trim TRIM UP 22μF/10V 1210 MLCC TEN06-12XXX 22μF/25V 1812 MLCC TEN06-24XXX 6.8μF/50V 1812 MLCC TEN06-48XXX 2.2μF/100V 1812 MLCC Recommended EN55022 Class B Filter Circuit Layout TRIM DOWN 5(4) 6(7) RU 6(6) TEN06-05XXX RD 7(7) Page 3 of 3 Issued Date：2008/01/25