TGL41-6.8 thru TGL41-200CA 500 Watt Transient Voltage Suppressor SCOTTSDALE DIVISION This series of 500 W Transient Voltage Suppressors (TVSs) provides the highest level of Peak Pulse Power (PPP) in the industry for the DO-213AB size MELF package. These PPP levels offer protection from switching transients, induced RF, secondary lightning, as well as ESD or EFT where these devices are also compliant to IEC61000-4-2 and IEC61000-4-4. In addition to unidirectional TVS configurations, this series also offers bidirectional options with C or CA suffix. Its configuration in a MELF package prevents lead damage to terminals and also reduces inductive parasitics for minimal transient voltage overshoots. DO-213AB WWW. Microsemi . C O M APPEARANCE DESCRIPTION IMPORTANT: For the most current data, consult MICROSEMI’s website: http://www.microsemi.com APPLICATIONS / BENEFITS FEATURES • • • • • • • • Economical series for 500 Watt Surface Mount transient voltage suppressor. Available in Both Unidirectional and Bidirectional Construction. Bidirectional has a C or CA suffix. 6.8 to 200 Volts Available. 500 Watts Peak Power Dissipation. Fast Response Time: Subnanosecond Response (Unipolar) or 5.0 ns (Bipolar). Plastic package has flame retardant epoxy meeting UL94V-0 • • MECHANICAL AND PACKAGING MAXIMUM RATINGS @ 25oC* • • • • • • Peak Pulse Power Dissipation (P PP) - 500 W (Note 1 & 5). Peak Forward Surge Current (IFSM) - 40 A (Note 3) • • Peak Pulse Current (IPP) at 10/1000 µs waveform see Table 1 (Note 1) Steady-State Power Dissipation, P (AV) - 3.0W (Note 2, 4) Operating and Storage temperatures, TOP, TSTG – o o (-55 C to +150 C) • • • • Molded epoxy package meets UL94V-0 End-Cap terminals solderable per MIL-STD-750, o Method 2026 (max 260 C for 10 seconds. Polarity is indicated by cathode band. Bidirectional devices have no polarity band. Body marked with P/N without TGL41 prefix. Weight: 0.06 grams (approximate) Tape and Reel packaging per EIA-481-2 with 12 mm tape with 5000 per 13 inch reel. 1. 2. 3. 4. 5. Copyright 2003 01-29-2003 REV A o Non-repetitive current pulse, per Figure 3 and derated above TA = 25 C per Figure 2. 2 Mounted on 4.0 mm copper pads to each terminal. (See Figure 3) 8.3 ms single half-sine wave duty cycle = 4 pulses per minute max. Peak forward voltage at 40 A is 3.5 volts (unipolar only) o o Derate linearly above 100 C to zero at 150 C for dc steady-state power. Also see Figure 2 for transient derating. Peak pulse current waveform is 10/1000 µs, with maximum duty cycle of 0.01%. (See Figure 4) Microsemi Scottsdale Division 8700 E. Thomas Rd. PO Box 1390, Scottsdale, AZ 85252 USA, (480) 941-6300, Fax: (480) 947-1503 Page 1 TGL41-6.8 thru 200CA Thermal Resistance junction to end cap (R? JEC) – o 15 C/W * Unless otherwise specified. NOTES: For Surface Mount Applications Protection from switching transients, induced RF, secondary lightning, as well as ESD, and EFT per IEC 61000-4-2 and IEC 6100-4-4 Very low inductive parasitics with minimal Ldi/dt voltage overshoots for fast-rise-time transients Robust package for pick-and-place handling TGL41-6.8 thru TGL41-200CA 500 Watt Transient Voltage Suppressor SCOTTSDALE DIVISION MICROSEMI PART NUMBER Copyright 2003 01-29-2003 REV A TEST CURRENT I(BR) mADC 10 10 10 10 10 10 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 RATED STAND-OFF VOLTAGE VW M V 5.5 5.8 6.05 6.4 6.63 7.02 7.37 7.78 8.1 8.55 8.92 9.4 9.72 10.2 10.5 11.1 12.1 12.8 12.9 13.6 14.5 15.3 16.2 17.1 17.8 18.8 19.4 20.5 21.8 23.1 24.3 25.6 26.8 28.2 29.1 30.8 31.6 33.3 34.8 36.8 38.1 40.2 41.3 43.6 45.4 47.8 50.2 53 55.1 58.1 60.7 64.1 66.4 70.1 73.7 77.8 MAX REVERSE LEAKAGE CURRENT ID @ VW M µA 1000 1000 500 500 200 200 50 50 10 10 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 MAX. CLAMPING VOLTAGE VC @ IPP V 10.8 10.5 11.7 11.3 12.5 12.1 13.8 13.4 15 14.5 16.2 15.6 17.3 16.7 19 18.2 22 21.2 23.5 22.5 26.5 25.2 29.1 27.7 31.9 30.6 34.7 33.2 39.1 37.5 43.5 41.4 47.7 45.7 52 49.9 56.4 53.9 61.9 59.3 67.8 64.8 73.5 70.1 80.5 77 89 85 98 92 108 103 118 113 131 125 MAX. PEAK PULSE CURRENT IPP A 46.3 47.6 42.7 44.2 40.0 41.3 36.2 37.3 33.3 34.5 30.9 32.1 28.9 29.9 26.3 27.5 22.7 23.6 21.3 22.2 18.5 19.8 17.2 18.1 15.7 16.3 14.4 15.1 12.8 13.3 11.5 12.1 10.5 10.9 9.6 10.0 8.9 9.3 8.1 8.4 7.4 7.7 6.8 7.1 6.2 6.5 5.6 5.9 5.1 5.4 4.6 4.9 4.2 4.4 3.8 4.0 Microsemi Scottsdale Division 8700 E. Thomas Rd. PO Box 1390, Scottsdale, AZ 85252 USA, (480) 941-6300, Fax: (480) 947-1503 MAX. TEMP COEFFICI ENT α V(BR) o %/ C .057 .057 .061 .061 .065 .065 .068 .068 .073 .073 .075 .075 .078 .078 .081 .081 .084 .084 .086 .086 .088 .088 .090 .090 .092 .092 .094 .094 .096 .096 .097 .097 .098 .098 .099 .099 .100 .100 .101 .101 .101 .101 .102 .102 .103 .103 .104 .104 .104 .104 .105 .105 .105 .105 .106 .106 Page 2 TGL41-6.8 thru 200CA TGL41-6.8 TGL41-6.8A TGL41-7.5 TGL41-7.5A TGL41-8.2 TGL41-8.2A TGL41-9.1 TGL41-9.1A TGL41-10 TGL41-10A TGL41-11 TGL41-11A TGL41-12 TGL41-12A TGL41-13 TGL41-13A TGL41-15 TGL41-15A TGL41-16 TGL41-16A TGL41-18 TGL41-18A TGL41-20 TGL41-20A TGL41-22 TGL41-22A TGL41-24 TGL41-24A TGL41-27 TGL41-27A TGL41-30 TGL41-30A TGL41-33 TGL41-33A TGL41-36 TGL41-36A TGL41-39 TGL41-39A TGL41-43 TGL41-43A TGL41-47 TGL41-47A TGL41-51 TGL41-51A TGL41-56 TGL41-56A TGL41-62 TGL41-62A TGL41-68 TGL41-68A TGL41-75 TGL41-75A TGL41-82 TGL41-82A TGL41-91 TGL41-91A BREAKDOWN VOLTAGE V(BR) MIN. NOM. MAX. V V V 6.12 6.8 7.48 6.45 6.8 7.14 6.75 7.5 8.25 7.13 7.5 7.88 7.38 8.2 9.02 7.79 8.2 8.61 8.19 9.1 10 8.65 9.1 9.55 9.0 10 11 9.5 10 10.5 9.9 11 12.1 10.5 11 11.6 10.8 12 13.2 11.4 12 12.6 11.7 13 14.3 12.4 13 13.7 13.5 15 16.5 14.3 15 15.8 14.4 16 17.6 15.2 16 16.8 16.2 18 19.8 17.1 18 18.9 18 20 22 19 20 21 19.8 22 24.2 20.9 22 23.1 21.6 24 26.4 22.8 24 25.2 24.3 27 29.7 25.7 27 28.4 27 30 33 28.5 30 31.5 29.7 33 36.3 31.4 33 34.7 32.4 36 39.6 34.2 36 37.8 35.1 39 42.9 37.1 39 41 38.7 43 47.3 40.9 43 45.2 42.3 47 51.7 44.7 47 49.4 45.9 51 56.1 48.5 51 53.6 50.4 56 61.6 53.2 56 58.8 55.8 62 68.2 58.9 62 65.1 61.2 68 74.8 64.6 68 71.4 67.5 75 82.5 71.3 75 78.8 73.8 82 90.2 77.9 82 86.1 81.9 91 100 86.5 91 95.5 WWW. Microsemi . C O M ELECTRICAL CHARACTERISTICS @ 25oC TGL41-6.8 thru TGL41-200CA 500 Watt Transient Voltage Suppressor SCOTTSDALE DIVISION Symbol SYMBOLS & DEFINITIONS Symbol Definition VWM IPP PPP Rated Stand-Off voltage Peak Pulse Current Peak Pulse Power V(BR) I(BR) ID MAX. TEMP COEFFICI ENT α V(BR) o %/ C .106 .106 .107 .107 .107 .107 .107 .107 .108 .108 .108 .108 .108 .108 .108 .108 .108 .108 WWW. Microsemi . C O M MAX MAX. BREAKDOWN TEST REVERSE RATED MAX. PEAK VOLTAGE CURRENT LEAKAGE STAND-OFF CLAMPING PULSE V(BR) CURRENT VOLTAGE VOLTAGE CURRENT I(BR) ID @ VWM MIN. NOM. MAX. VW M VC @ IPP IPP V V V mA V V A µA TGL41-100 90 100 110 1 81 5 144 3.5 TGL41-100A 95 100 105 1 85.5 5 137 3.6 TGL41-110 99 110 121 1 89.2 5 158 3.2 TGL41-110A 105 110 116 1 94 5 152 3.3 TGL41-120 108 120 132 1 97.2 5 173 2.9 TGL41-120A 114 120 126 1 102 5 165 3.0 TGL41-130 117 130 143 1 105 5 187 2.7 TGL41-130A 124 130 137 1 111 5 179 2.8 TGL41-150 135 150 165 1 121 5 215 2.3 TGL41-150A 143 150 158 1 128 5 207 2.4 TGL41-160 144 160 176 1 130 5 230 2.2 TGL41-160A 152 160 168 1 136 5 219 2.3 TGL41-170 153 170 187 1 138 5 244 2.0 TGL41-170A 161 170 179 1 145 5 234 2.1 TGL41-180 162 180 198 1 146 5 258 1.9 TGL41-180A 171 180 189 1 154 5 246 2.0 TGL41-200 180 200 220 1 162 5 287 1.7 TGL41-200A 190 200 210 1 171 5 274 1.8 For Bidirectional construction, indicate a C or CA suffix after part number. Capacitance will be ½ that shown in Fig 3. Forward Voltage (Vf) @ 40 amps peak 8.3 ms half-sine wave equal to 3.5 volts max (For Unidirectional only). MICROSEMI PART NUMBER Definition Breakdown Voltage Breakdown Current Standby Current OUTLINE AND CIRCUIT Peak Pulse Power (PPP) or Current (IPP ) in Percentage of o 25 C rating 20 o TC = 25 C 10 7.0 5.0 3.0 2.0 1.0 0.7 0.5 TGL41-6.8 thru 200CA PPP – Peak Pulse Power – kW 30 0.3 0.2 0.1 0.1 2.0 0.5 1.0 2.0 5.0 10 20 50 100 200 1000 tw – Microseconds FIGURE 1 Peak Pulse Power vs. Pulse Width Copyright 2003 01-29-2003 REV A 10,000 o End Cap Temperature C FIGURE 2 Derating Curve Microsemi Scottsdale Division 8700 E. Thomas Rd. PO Box 1390, Scottsdale, AZ 85252 USA, (480) 941-6300, Fax: (480) 947-1503 Page 3 TGL41-6.8 thru TGL41-200CA 500 Watt Transient Voltage Suppressor SCOTTSDALE DIVISION C – Capacitance - Picofarads Percentage of IPP WWW. Microsemi . C O M Pulse Current (I P) in Percentage of IPP – Amperes vs. Time (t) Milliseconds Milliseconds V(BR) - Breakdown Voltage – Volts FIGURE 3 Pulse Waveform for Exponential Surge FIGURE 4 Typical Capacitance vs. Breakdown Voltage (Unidirectional only) Bidirectional Suffix C devices are ½ that shown. DIMENSIONS AND LAYOUT MELF DO-213AB DIM A B C MILLIMETERS MIN MAX 2.39 2.66 4.80 5.20 0.41 0.55 INCHES MIN MAX 0.094 0.102 0.189 0.205 0.016 0.022 TGL41-6.8 thru 200CA Copyright 2003 01-29-2003 REV A Microsemi Scottsdale Division 8700 E. Thomas Rd. PO Box 1390, Scottsdale, AZ 85252 USA, (480) 941-6300, Fax: (480) 947-1503 Page 4