TI TL062CP

 SLOS078J − NOVEMBER 1978 − REVISED SEPTEMBER 2004
D Very Low Power Consumption
D Typical Supply Current . . . 200 µA
D
D
D
D
D
(Per Amplifier)
D Wide Common-Mode and Differential
TL062 . . . D, JG, P, PS, OR PW PACKAGE
TL062A . . . D, P, OR PS PACKAGE
TL062B . . . D OR P PACKAGE
(TOP VIEW)
TL061, TL061A . . . D, P, OR PS PACKAGE
TL061B . . . P PACKAGE
(TOP VIEW)
1
8
2
7
3
6
4
5
NC
VCC+
OUT
OFFSET N2
1OUT
1IN−
1IN+
VCC−
13
3
12
4
11
5
10
6
9
7
8
4OUT
4IN−
4IN+
VCC−
3IN+
3IN−
3OUT
NC − No internal connection
3
6
4
5
VCC+
2OUT
2IN−
2IN+
NC
1OUT
NC
VCC+
NC
14
2
7
TL064 . . . FK PACKAGE
(TOP VIEW)
NC
1IN−
NC
1IN+
NC
4
3 2 1 20 19
18
5
17
6
16
7
15
8
14
9 10 11 12 13
NC
2OUT
NC
2IN−
NC
NC
VCC−
NC
2IN+
NC
1
8
2
TL062 . . . FK PACKAGE
(TOP VIEW)
TL064 . . . D, J, N, NS, PW, OR W PACKAGE
TL064A, TL064B . . . D OR N PACKAGE
(TOP VIEW)
1OUT
1IN−
1IN+
VCC+
2IN+
2IN−
2OUT
1
1IN−
1OUT
NC
4OUT
4IN−
OFFSET N1
IN−
IN+
VCC−
1IN+
NC
VCC+
NC
2IN+
4
3 2 1 20 19
18
5
17
6
16
7
15
8
14
9 10 11 12 13
4IN+
NC
VCC−
NC
3IN+
2IN−
2OUT
NC
3OUT
3IN−
D
D
Voltage Ranges
Low Input Bias and Offset Currents
Common-Mode Input Voltage Range
Includes VCC+
Output Short-Circuit Protection
High Input Impedance . . . JFET-Input Stage
Internal Frequency Compensation
Latch-Up-Free Operation
High Slew Rate . . . 3.5 V/µs Typ
description/ordering information
The JFET-input operational amplifiers of the TL06_ series are designed as low-power versions of the
TL08_ series amplifiers. They feature high input impedance, wide bandwidth, high slew rate, and low input offset
and input bias currents. The TL06_ series features the same terminal assignments as the TL07_ and
TL08_ series. Each of these JFET-input operational amplifiers incorporates well-matched, high-voltage JFET
and bipolar transistors in an integrated circuit.
The C-suffix devices are characterized for operation from 0°C to 70°C. The I-suffix devices are characterized
for operation from −40°C to 85°C, and the M-suffix devices are characterized for operation over the full military
temperature range of −55°C to 125°C.
Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of
Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.
Copyright  2004, Texas Instruments Incorporated
!" # $%&" !# '%()$!" *!"&+
*%$"# $ " #'&$$!"# '& ",& "&# &-!# #"%&"#
#"!*!* .!!"/+ *%$" '$&##0 *&# " &$&##!)/ $)%*&
"&#"0 !)) '!!&"&#+
'*%$"# $')!" " 12313 !)) '!!&"&# !& "&#"&*
%)&## ",&.#& "&*+ !)) ",& '*%$"# '*%$"
'$&##0 *&# " &$&##!)/ $)%*& "&#"0 !)) '!!&"&#+
POST OFFICE BOX 655303
• DALLAS, TEXAS 75265
1
SLOS078J − NOVEMBER 1978 − REVISED SEPTEMBER 2004
description/ordering information (continued)
ORDERING INFORMATION
TA
VIOMAX
AT 25°C
TL062CP
TL062CP
TL064CN
TL064CN
PDIP (N)
Tube of 25
Tube of 75
TL061CD
Reel of 2500
TL061CDR
Tube of 75
TL062CD
Reel of 2500
TL062CDR
Tube of 50
TL064CD
Reel of 2500
TL064CDR
T062
TL064CNSR
TL064
Reel of 2000
Tube of 150
TL062CPW
Reel of 2000
TL062CPWR
Tube of 90
TL064CPW
Reel of 2000
TL064CPWR
T062
T064
TL061ACP
TL061ACP
TL062ACP
TL062ACP
TL064ACN
TL064ACN
PDIP (P)
Tube of 50
PDIP (N)
Tube of 25
Tube of 75
TL061ACD
Reel of 2500
TL061ACDR
Tube of 75
TL062ACD
Reel of 2500
TL062ACDR
Tube of 50
TL064ACD
Reel of 2500
TL064ACDR
Reel of 2000
TL064C
TL062CPSR
SOP (NS)
SOP (PS)
TL062C
T061
Reel of 2000
SOIC (D)
TL061C
TL061CPSR
SOP (PS)
TSSOP (PW)
6 mV
TL061CP
Tube of 50
15 mV
TOP-SIDE
MARKING
TL061CP
PDIP (P)
SOIC (D)
0°C to 70°C
ORDERABLE
PART NUMBER
PACKAGE†
061AC
062AC
TL064AC
TL061ACPSR
T061A
TL062ACPSR
T062A
TL061BCP
TL061BCP
PDIP (P)
Tube of 50
TL062BCP
TL062BCP
PDIP (N)
Tube of 25
TL064BCN
TL064BCN
Tube of 75
TL062BCD
Reel of 2500
TL062BCDR
Tube of 50
TL064BCD
Reel of 2500
TL064BCDR
3 mV
SOIC (D)
062BC
TL064BC
† Package drawings, standard packing quantities, thermal data, symbolization, and PCB design guidelines are available at
www.ti.com/sc/package.
2
POST OFFICE BOX 655303
• DALLAS, TEXAS 75265
SLOS078J − NOVEMBER 1978 − REVISED SEPTEMBER 2004
description/ordering information (continued)
ORDERING INFORMATION (continued)
TA
−40°C to 85°C
VIOMAX
AT 25°C
9 mV
TL061IP
TL061IP
TL062IP
TL062IP
TL064IN
TL064IN
Tube of 50
PDIP (N)
Tube of 25
Tube of 75
TL061ID
Reel of 2000
TL061IDR
Tube of 75
TL062ID
Reel of 2000
TL062IDR
Tube of 50
TL064ID
Reel of 2500
TL064IDR
TSSOP (PW)
Reel of 2000
TL062IPWR
TL062I
CDIP (JG)
Tube of 50
TL062MJG
TL062MJG
LCCC (FK)
Tube of 55
TL062MFK
TL062MFK
CDIP (J)
Tube of 25
TL064MJ
TL064MJ
CFP (W)
Tube of 150
TL064MW
TL064MW
LCCC (FK)
Tube of 55
TL064MFK
SOIC (D)
−55°C
−55
C to 125
125°C
C
TOP-SIDE
MARKING
PDIP (P)
6 mV
6 mV
ORDERABLE
PART NUMBER
PACKAGE†
TL061I
TL062I
TL064I
TL064MFK
† Package drawings, standard packing quantities, thermal data, symbolization, and PCB design guidelines are available at
www.ti.com/sc/package.
POST OFFICE BOX 655303
• DALLAS, TEXAS 75265
3
SLOS078J − NOVEMBER 1978 − REVISED SEPTEMBER 2004
symbol (each amplifier)
IN+
+
IN−
−
OFFSET N1
OUT
OFFSET N2
Offset Null/Compensation
TL061 Only
schematic (each amplifier)
VCC+
IN+
50 Ω
IN−
100 Ω
C1
OFFSET N1
OFFSET N2
OUT
TL061 Only
C1 = 10 pF on TL061, TL062, and TL064
Component values shown are nominal.
4
POST OFFICE BOX 655303
• DALLAS, TEXAS 75265
VCC−
SLOS078J − NOVEMBER 1978 − REVISED SEPTEMBER 2004
absolute maximum ratings over operating free-air temperature range (unless otherwise noted)†
TL06_C
TL06_AC
TL06_BC
TL06_I
TL06_M
UNIT
Supply voltage, VCC+ (see Note 1)
18
18
18
V
Supply voltage, VCC− (see Note 1)
−18
−18
−18
V
Differential input voltage, VID (see Note 2)
±30
±30
±30
V
V
±15
±15
±15
Unlimited
Unlimited
Unlimited
D (8-pin) package
97
97
D (14-pin) package
86
86
N package
80
80
NS package
76
76
P package
85
85
PS package
95
95
PW (8-pin) package
149
149
PW (14-pin)
package
113
113
Input voltage, VI (see Notes 1 and 3)
Duration of output short circuit (see Note 4)
Package thermal impedance, θJA (see Notes 5 and 6)
Package thermal impedance, θJC (see Notes 7 and 8)
°C/W
C/W
FK package
5.61
J package
15.05
JG package
14.5
W package
14.65
°C/W
150
°C
Case temperature for 60 seconds
FK package
260
°C
Lead temperature 1,6 mm (1/16 inch) from case for 60
seconds
J, JG, U, or
W package
300
°C
Lead temperature 1,6 mm (1/6 inch) from case for 10
seconds
D, N, NS, P, PS,
or PW package
Operating virtual junction temperature, TJ
150
260
150
260
°C
Storage temperature range, Tstg
−65 to 150
−65 to 150
−65 to 150
°C
† Stresses beyond those listed under “absolute maximum ratings” may cause permanent damage to the device. These are stress ratings only, and
functional operation of the device at these or any other conditions beyond those indicated under “recommended operating conditions” is not
implied. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability.
NOTES: 1. All voltage values except differential voltages are with respect to the midpoint between VCC+ and VCC−.
2. Differential voltages are at IN+ with respect to IN−.
3. The magnitude of the input voltage should never exceed the magnitude of the supply voltage or 15 V, whichever is less.
4. The output may be shorted to ground or to either supply. Temperature and/or supply voltages must be limited to ensure that the
dissipation rating is not exceeded.
5. Maximum power dissipation is a function of TJ(max), θJA, and TA. The maximum allowable power dissipation at any allowable
ambient temperature is PD = (TJ(max) − TA)/θJA. Operating at the absolute maximum TJ of 150°C can affect reliability.
6. The package thermal impedance is calculated in accordance with JESD 51-7.
7. Maximum power dissipation is a function of TJ(max), θJC, and TC. The maximum allowable power dissipation at any allowable case
temperature is PD = (TJ(max) − TC)/θJC. Operating at the absolute maximum TJ of 150°C can affect reliability.
8. The package thermal impedance is calculated in accordance with MIL-STD-883.
POST OFFICE BOX 655303
• DALLAS, TEXAS 75265
5
SLOS078J − NOVEMBER 1978 − REVISED SEPTEMBER 2004
electrical characteristics, VCC± = ±15 V (unless otherwise noted)
PARAMETER
TL061C
TL062C
TL064C
TEST CONDITIONS†
MIN
VIO
αV
IO
IIO
IIB
TA = 25°C
TA = Full range
Temperature coefficient
of input offset voltage
VO = 0, RS = 50 Ω,
TA = Full range
VO = 0
TA = 25°C
TA = Full range
5
Input offset current
30
VO = 0
TA = 25°C
TA = Full range
MIN
200
5
400
30
10
±11
±11
−12
to
15
±13.5
±10
±13.5
TA = 25°C
TA = Full range
±10
RL ≥ 10 kΩ,
Large-signal differential
voltage amplification
VO = ± 10 V,
RL ≥ 10 kΩ
TA = 25°C
TA = Full range
3
AVD
Unity-gain bandwidth
RL = 10 kΩ,
TA = 25°C
Input resistance
Common-mode rejection
ratio
TA = 25°C
VIC = VICRmin, VO = 0,
RS = 50 Ω, TA = 25°C
PD
Supply-voltage rejection
ratio
(∆VCC±/∆VIO)
Total power dissipation
(each amplifier)
VCC = ± 9 V to ± 15 V,
VO = 0, RS = 50 Ω
Ω,
TA = 25°C
VO = 0,
TA = 25°C,
No load
ICC
Supply current
(each amplifier)
VO = 0,
No load
MAX
6
±10
100
pA
3
nA
200
pA
7
nA
V
V
±10
6
4
3
6
V/mV
4
1
12
10
mV
µV/°C
10
−12
to
15
RL = 10 kΩ,
UNIT
7.5
5
Maximum peak output
voltage swing
TA = 25°C
TYP
3
10
VOM
kSVR
15
20
Common-mode
input voltage range
CMRR
MAX
3
Input offset voltage
VICR
B1
ri
TYP
VO = 0,
RS = 50 Ω
Input bias current‡
TL061AC
TL062AC
TL064AC
1
12
10
MHz
Ω
70
86
80
86
dB
70
95
80
95
dB
TA = 25°C,
6
7.5
6
7.5
mW
200
250
200
250
µA
VO1/VO2
Crosstalk attenuation
AVD = 100,
TA = 25°C
120
120
dB
† All characteristics are measured under open-loop conditions with zero common-mode input voltage unless otherwise specified. Full range for
TA is 0°C to 70°C for TL06_C, TL06_AC, and TL06_BC and −40°C to 85°C for TL06_I.
‡ Input bias currents of an FET-input operational amplifier are normal junction reverse currents, which are temperature sensitive, as shown in
Figure 15. Pulse techniques are used to maintain the junction temperature as close to the ambient temperature as possible.
6
POST OFFICE BOX 655303
• DALLAS, TEXAS 75265
SLOS078J − NOVEMBER 1978 − REVISED SEPTEMBER 2004
electrical characteristics, VCC± = ±15 V (unless otherwise noted)
PARAMETER
TL061BC
TL062BC
TL064BC
TEST CONDITIONS†
MIN
VIO
αV
IO
IIO
IIB
TA = 25°C
TA = Full range
Temperature coefficient of
input offset voltage
VO = 0, RS = 50 Ω,
TA = Full range
VO = 0
TA = 25°C
TA = Full range
5
Input offset current
30
VO = 0
TA = 25°C
TA = Full range
9
±10
±13.5
VO = ± 10 V,
RL ≥ 10 kΩ
TA = 25°C
TA = Full range
4
Unity-gain bandwidth
RL = 10 kΩ,
ICC
Supply current
(each amplifier)
VO = 0,
No load
30
±13.5
Large-signal differential
voltage amplification
PD
200
±11
AVD
VCC = ± 9 V to ± 15 V,
VO = 0, RS = 50 Ω
Ω,
TA = 25°C
VO = 0,
TA = 25°C,
No load
5
±11
±10
Supply-voltage rejection
ratio
(∆VCC±/∆VIO)
Total power dissipation
(each amplifier)
100
±10
100
pA
10
nA
200
pA
20
nA
V
V
±10
6
4
4
6
V/mV
4
1
1012
mV
µV/°C
10
−12
to
15
TA = 25°C
TA = Full range
Common-mode
rejection ratio
6
7
RL ≥ 10 kΩ,
TA = 25°C
TA = 25°C
VIC = VICRmin, VO = 0,
RS = 50 Ω, TA = 25°C
MAX
3
−12
to
15
RL = 10 kΩ,
TA = 25°C
UNIT
TYP
3
Maximum peak output
voltage swing
Input resistance
MIN
10
VOM
kSVR
3
5
Common-mode
input voltage range
CMRR
MAX
2
Input offset voltage
VICR
B1
ri
TYP
VO = 0,
RS = 50 Ω
Input bias current‡
TL061I
TL062I
TL064I
1
1012
MHz
Ω
80
86
80
86
dB
80
95
80
95
dB
TA = 25°C,
6
7.5
6
7.5
mW
200
250
200
250
µA
VO1/VO2
Crosstalk attenuation
AVD = 100,
TA = 25°C
120
120
dB
† All characteristics are measured under open-loop conditions with zero common-mode input voltage, unless otherwise specified. Full range for
TA is 0°C to 70°C for TL06_C, TL06_AC, and TL06_BC and −40°C to 85°C for TL06_I.
‡ Input bias currents of an FET-input operational amplifier are normal junction reverse currents, which are temperature sensitive, as shown in
Figure 15. Pulse techniques are used to maintain the junction temperature as close to the ambient temperature as possible.
POST OFFICE BOX 655303
• DALLAS, TEXAS 75265
7
SLOS078J − NOVEMBER 1978 − REVISED SEPTEMBER 2004
electrical characteristics, VCC± = ±15 V (unless otherwise noted)
TL061M
TL062M
TEST CONDITIONS†
PARAMETER
MIN
VIO
αV
IO
IIO
TA = 25°C
TA = −55°C to 125°C
Input offset voltage
VO = 0,
RS = 50 Ω
Temperature coefficient
of input offset voltage
VO = 0, RS = 50 Ω,
TA = −55°C to 125°C
Input offset current
VO = 0
Input bias current‡
VO = 0
TA = 25°C
TA = −55°C
TA = −55°C
TA = 125°C
TYP
3
100
5
20*
20
30
50*
50
50
±13.5
±10
±13.5
TA = 25°C
4
voltage amplification
VO = ±10 V,
RL ≥ 10 kΩ
TA = −55°C to 125°C
4
Unity-gain bandwidth
RL = 10 kΩ,
TA = 25°C
200
50*
±10
Large-signal differential
100
20
200
±10
4
pA
nA
pA
nA
V
V
±10
6
mV
µV/°C
20*
−12
to
15
TA = 25°C
TA = −55°C to 125°C
9
10
±11.5
RL = 10 kΩ,
RL ≥ 10 kΩ,
UNIT
MAX
15
−12
to
15
Maximum peak output
voltage swing
CMRR
MIN
±11.5
VOM
Common-mode
rejection ratio
6
30
TA = 25°C
Input resistance
3
5
Common-mode
input voltage range
B1
ri
MAX
10
VICR
AVD
TYP
9
TA = 125°C
TA = 25°C
IIB
TL064M
6
V/mV
4
MHz
1012
TA = 25°C
VIC = VICRmin, VO = 0,
RS = 50 Ω, TA = 25°C
1012
Ω
80
86
80
86
dB
80
95
80
95
dB
PD
Supply-voltage
rejection
ratio (∆VCC±/∆VIO)
Total power dissipation
(each amplifier)
VO = 0,
No load
TA = 25°C,
6
7.5
6
7.5
mW
ICC
Supply current
(each amplifier)
VO = 0,
No load
TA = 25°C,
200
250
200
250
µA
kSVR
VCC = ±9 V to ±15 V, VO = 0,
RS = 50 Ω, TA = 25°C
VO1/VO2
Crosstalk attenuation
AVD = 100,
TA = 25°C
120
120
dB
* This parameter is not production tested.
† All characteristics are measured under open-loop conditions, with zero common-mode voltage, unless otherwise specified.
‡ Input bias currents of an FET-input operational amplifier are normal junction reverse currents, which are temperature sensitive, as shown in
Figure 15. Pulse techniques are used to maintain the junction temperature as close to the ambient temperature as possible.
operating characteristics, VCC± = ±15 V, TA = 25°C
PARAMETER
SR
Slew rate at unity gain (see Note 5)
tr
Rise time
TEST CONDITIONS
Overshoot factor
Vn
Equivalent input noise voltage
NOTE 5: Slew rate at −55°C to 125°C is 0.7 V/µs min.
8
VI = 10 V,
RL = 10 kΩ,
CL = 100 pF,
See Figure 1
VI = 20 mV,
CL = 100 pF,
RL = 10 kΩ,
See Figure 1
RS = 20 Ω,
f = 1 kHz
POST OFFICE BOX 655303
• DALLAS, TEXAS 75265
MIN
TYP
1.5
3.5
0.2
10%
42
MAX
UNIT
V/µs
µss
nV/√Hz
SLOS078J − NOVEMBER 1978 − REVISED SEPTEMBER 2004
PARAMETER MEASUREMENT INFORMATION
10 kΩ
−
VI
1 kΩ
−
OUT
+
OUT
CL = 100 pF
RL = 2 kΩ
+
RL
Figure 1. Unity-Gain Amplifier
IN−
Figure 2. Gain-of-10 Inverting Amplifier
TL061
OUT
N2
+
IN+
CL = 100 pF
−
VI
N1
100 kΩ
1.5 kΩ
VCC−
Figure 3. Input Offset-Voltage Null Circuit
POST OFFICE BOX 655303
• DALLAS, TEXAS 75265
9
SLOS078J − NOVEMBER 1978 − REVISED SEPTEMBER 2004
TYPICAL CHARACTERISTICS
Table of Graphs
FIGURE
10
Maximum peak output voltage vs Supply voltage
4
Maximum peak output voltage vs Free-air temperature
5
Maximum peak output voltage vs Load resistance
6
Maximum peak output voltage vs Frequency
7
Differential voltage amplification vs Free-air temperature
8
Large-signal differential voltage amplification vs Frequency
9
Phase shift vs Frequency
9
Supply current vs Supply voltage
10
Supply current vs Free-air temperature
11
Total power dissipation vs Free-air temperature
12
Common-mode rejection ratio vs Free-air temperature
13
Normalized unity-gain bandwidth vs Free-air temperature
14
Normalized slew rate vs Free-air temperature
14
Normalized phase shift vs Free-air temperature
14
Input bias current vs Free-air temperature
15
Voltage-follower large-signal pulse response vs Time
16
Output voltage vs Elapsed time
17
Equivalent input noise voltage vs Frequency
18
POST OFFICE BOX 655303
• DALLAS, TEXAS 75265
SLOS078J − NOVEMBER 1978 − REVISED SEPTEMBER 2004
TYPICAL CHARACTERISTICS†
MAXIMUM PEAK OUTPUT VOLTAGE
vs
FREE-AIR TEMPERATURE
MAXIMUM PEAK OUTPUT VOLTAGE
vs
SUPPLY VOLTAGE
±15
VOM − Maximum Peak Output Voltage − V
VOM − Maximum Peak Output Voltage − V
±15
RL = 10 kΩ
TA = 25°C
See Figure 2
±12.5
±12.5
±10
±7.5
±5
ÁÁ
ÁÁ
±10
±7.5
±5
ÁÁ
ÁÁ
±2.5
±2.5
0
0
2
4
6
8
10
12
14
0
−75
16
VCC± = ±15 V
RL = 10 kΩ
See Figure 2
−50
|VCC±| − Supply Voltage − V
−25
MAXIMUM PEAK OUTPUT VOLTAGE
vs
LOAD RESISTANCE
ÁÁÁÁÁ
ÁÁÁÁÁ
±15
VCC± = ±15 V
TA = 25°C
See Figure 2
VOM − Maximum Peak Output Voltage − V
VOM − Maximum Peak Output Voltage − V
50
75
100
125
MAXIMUM PEAK OUTPUT VOLTAGE
vs
FREQUENCY
±15
ÁÁ
ÁÁ
25
Figure 5
Figure 4
±12.5
0
TA − Free-Air Temperature − °C
±10
±7.5
±5
RL = 10 kΩ
TA = 25°C
See Figure 2
±12.5
VCC± = ±12 V
±10
±7.5
±5
ÁÁ
ÁÁ
±2.5
ÁÁÁÁ
ÁÁÁÁ
ÁÁÁÁ
ÁÁÁÁ
VCC± = ±15 V
VCC± = ±5 V
±2.5
0
0
100
200
400
700 1 k
2k
4k
7 k 10 k
1k
RL − Load Resistance − Ω
10 k
100 k
1M
10 M
f − Frequency − Hz
Figure 6
Figure 7
† Data at high and low temperatures are applicable only within the specified operating free-air temperature ranges of the various devices.
POST OFFICE BOX 655303
• DALLAS, TEXAS 75265
11
SLOS078J − NOVEMBER 1978 − REVISED SEPTEMBER 2004
TYPICAL CHARACTERISTICS†
DIFFERENTIAL VOLTAGE AMPLIFICATION
vs
FREE-AIR TEMPERATURE
AVD − Differential Voltage Amplification − V/mV
10
VCC± = ±15 V
RL = 10 kΩ
7
4
2
1
−75
−50
−25
0
25
50
75 100
TA − Free-Air Temperature − °C
125
Figure 8
LARGE-SIGNAL
DIFFERENTIAL VOLTAGE
AMPLIFICATION AND PHASE SHIFT
vs
FREQUENCY
VCC± = ±15 V
Rext = 0
RL = 10 kΩ
TA = 25°C
10
Phase Shift
(right scale)
1
0°
45°
90°
0.1
AVD
(left scale)
0.01
135°
0.001
1
10
100
1k
Phase Shift
AVD − Large-Signal Differential
Voltage Amplification − V/mV
100
10 k
100 k
1M
180°
10 M
f − Frequency − Hz
Figure 9
† Data at high and low temperatures are applicable only within the specified operating free-air temperature ranges of the various devices.
12
POST OFFICE BOX 655303
• DALLAS, TEXAS 75265
SLOS078J − NOVEMBER 1978 − REVISED SEPTEMBER 2004
TYPICAL CHARACTERISTICS†
SUPPLY CURRENT
vs
SUPPLY VOLTAGE
SUPPLY CURRENT
vs
FREE-AIR TEMPERATURE
250
TA = 25°C
No Signal
No Load
200
I CC
ICC± − Supply Current − µA
I CC
ICC± − Supply Current − µA
250
150
ÁÁ
ÁÁ
ÁÁ
100
50
200
150
ÁÁ
ÁÁ
ÁÁ ÎÎÎÎÎÎ
ÎÎÎÎÎÎ
ÎÎÎÎÎÎ
100
50
0
0
2
4
6
8
10
12
14
16
0
−75
VCC± = ±15 V
No Signal
No Load
−50
−25
Figure 10
87
CMRR − Common-Mode Rejection Ratio − dB
P
PD
D − Total Power Dissipation − mW
25
TL064
VCC± = ±15 V
No Signal
No Load
15
TL062
ÁÁ
ÁÁ
10
TL061
5
−50
−25
0
25
50
75
100
125
ALL EXCEPT TL06_C
COMMON-MODE REJECTION RATIO
vs
FREE-AIR TEMPERATURE
30
0
−75
25
Figure 11
TOTAL POWER DISSIPATION
vs
FREE-AIR TEMPERATURE
20
0
TA − Free-Air Temperature − °C
|VCC±| − Supply Voltage − V
50
75
100
125
VCC± = ±15 V
RL = 10 kΩ
86
85
84
83
82
81
−75
−50
−25
0
25
50
75
100
125
TA − Free-Air Temperature − °C
TA − Free-Air Temperature − °C
Figure 12
Figure 13
† Data at high and low temperatures are applicable only within the specified operating free-air temperature ranges of the various devices.
POST OFFICE BOX 655303
• DALLAS, TEXAS 75265
13
SLOS078J − NOVEMBER 1978 − REVISED SEPTEMBER 2004
TYPICAL CHARACTERISTICS
1.03
1.3
1.2
Unity-Gain Bandwidth
(left scale)
1.02
Phase Shift
(right scale)
1.01
1.1
Slew Rate
(left scale)
1
1
0.99
0.9
0.8
0.7
−75
VCC± = ±15 V
RL = 10 kΩ
f = B1 for Phase Shift
−50
Normalized Phase Shift
Normalized Unity-Gain Bandwidth and Slew Rate
NORMALIZED UNITY-GAIN BANDWIDTH,
SLEW RATE, AND PHASE SHIFT
vs
FREE-AIR TEMPERATURE
0.98
−25
0
25
50
75
100
TA − Free-Air Temperature − °C
0.97
125
Figure 14
VOLTAGE-FOLLOWER
LARGE-SIGNAL PULSE RESPONSE
vs
TIME
INPUT BIAS CURRENT
vs
FREE-AIR TEMPERATURE
IIB
IIB − Input Bias Current − nA
40
ÁÁÁÁÁ
6
Input
VCC± = ±15 V
4
Input and Output Voltages − V
100
10
4
1
ÁÁ
ÁÁ
0.4
0.1
0
Output
−2
VCC± = ±15 V
RL = 10 kΩ
CL = 100 pF
TA = 25°C
−4
0.04
0.01
−50
2
−25
0
25
50
75
100
TA − Free-Air Temperature − °C
125
−6
0
Figure 15
14
2
4
6
t − Time − µs
Figure 16
POST OFFICE BOX 655303
• DALLAS, TEXAS 75265
8
10
SLOS078J − NOVEMBER 1978 − REVISED SEPTEMBER 2004
TYPICAL CHARACTERISTICS
EQUIVALENT INPUT NOISE VOLTAGE
vs
FREQUENCY
OUTPUT VOLTAGE
vs
ELAPSED TIME
V n − Equivalent Input Noise Voltage − nV/ Hz
24
VO − Output Voltage − mV
ÁÁÁÁÁ
ÁÁÁÁÁ
ÁÁÁÁÁ
100
28
Overshoot
20
90%
16
12
8
4
10%
VCC± = ±15 V
RL = 10 kΩ
TA = 25°C
0
tr
−4
0
0.2
0.4
0.6
0.8
1
t − Elapsed Time − µs
1.2
1.4
ÁÁ
ÁÁ
VCC± = ±15 V
RS = 20 Ω
TA = 25°C
90
80
70
60
50
40
30
20
10
0
10
40
100
400 1 k
4 k 10 k
f − Frequency − Hz
40 k 100 k
Figure 18
Figure 17
POST OFFICE BOX 655303
• DALLAS, TEXAS 75265
15
SLOS078J − NOVEMBER 1978 − REVISED SEPTEMBER 2004
APPLICATION INFORMATION
Table of Application Diagrams
PART
NUMBER
FIGURE
Instrumentation amplifier
TL064
19
0.5-Hz square-wave oscillator
TL061
20
High-Q notch filter
TL061
21
Audio-distribution amplifier
TL064
22
Low-level light detector preamplifier
TL061
23
AC amplifier
TL061
24
Microphone preamplifier with tone control
TL061
25
Instrumentation amplifier
TL062
26
IC preamplifier
TL062
27
APPLICATION DIAGRAM
VCC+
10 kΩ
0.1%
10 kΩ
0.1%
−
TL064
100 kΩ
+
Input A
VCC+
VCC−
−
Output
TL064
100 kΩ
+
VCC+
1 MΩ
VCC+
VCC−
Input B
+
−
TL064
10 kΩ
0.1%
−
TL064
10 kΩ
0.1%
100 kΩ
+
100 kΩ
VCC−
VCC−
Figure 19. Instrumentation Amplifier
RF = 100 kΩ
VCC+
−
Output
Input
−
TL061
+
CF = 3.3 µF
TL061
R1
C3
+
15 V
3.3 kΩ
VCC−
1 kΩ
−15 V
C1
3.3 kΩ
f+
2p
1
RF
CF
9.1 kΩ
Figure 20. 0.5-Hz Square-Wave Oscillator
16
POST OFFICE BOX 655303
Output
R2
R3
C2
R1 = R2 = 2 × R3 = 1.5 MΩ
C1 + C2 + C3 + 110 pF
2
1
+ 1 kHz
fo +
2p R1 C1
Figure 21. High-Q Notch Filter
• DALLAS, TEXAS 75265
SLOS078J − NOVEMBER 1978 − REVISED SEPTEMBER 2004
APPLICATION INFORMATION
VCC+
−
1 MΩ
TL064
VCC+
Output A
+
−
1 µF
TL064
+
TL064
100 kΩ
Output B
+
VCC+
VCC+
−
100 kΩ
100 µF
VCC+
−
Input
100 kΩ
TL064
Output C
+
Figure 22. Audio-Distribution Amplifier
15 V
10 kΩ
10 kΩ
10 kΩ
+
TIL601
100 pF
10 kΩ
TL061
Output
−
10 kΩ
5 kΩ
10 kΩ
−15 V
Figure 23. Low-Level Light Detector Preamplifier
POST OFFICE BOX 655303
• DALLAS, TEXAS 75265
17
SLOS078J − NOVEMBER 1978 − REVISED SEPTEMBER 2004
APPLICATION INFORMATION
VCC+
0.1 µF
10 kΩ
10 kΩ
1 MΩ
−
Output
TL061
50 Ω
+
N2
10 kΩ
0.1 µF
N1
250 kΩ
Figure 24. AC Amplifier
10 kΩ
0.1 µF
100 kΩ
0.06 µF
0.06 µF
+
TL061
−
1.2 MΩ
47 kΩ
1 kΩ
1 µF
10 kΩ
0.002 µF
100 kΩ
50 kΩ
2.7 kΩ
270 Ω
100 kΩ
0.003 µF
10 kΩ
100 kΩ
0.001 µF
+
50 kΩ
20 µF
Figure 25. Microphone Preamplifier With Tone Control
+
TL062
−
IN+
Output
100 kΩ
1 kΩ
1 kΩ
100 kΩ
IN−
−
TL062
+
Figure 26. Instrumentation Amplifier
18
POST OFFICE BOX 655303
• DALLAS, TEXAS 75265
0.02 µF
SLOS078J − NOVEMBER 1978 − REVISED SEPTEMBER 2004
APPLICATION INFORMATION
IC PREAMPLIFIER RESPONSE CHARACTERISTICS
25
ÁÁÁÁÁ
ÁÁÁÁÁ
ÁÁÁÁÁ
Max Bass
20
VCC± = ±15 V
TA = 25°C
15
Voltage Amplification − dB
Max
Treble
10
5
0
−5
−10
ÁÁÁ
ÁÁÁ
−15
−20
−25
20
40
ÁÁÁ
ÁÁÁ
Min
Treble
Min Bass
100 200 400
1k 2k
4k
10 k 20 k
f − Frequency − Hz
220 kΩ
0.00375 µF
0.01 µF
10 kΩ
27 kΩ
MIN
100 kΩ
Bass
MAX
VCC+
100 Ω
1 µF
Input
100 Ω
0.003 µF
0.03 µF
+
TL062
−
10 kΩ
3.3 kΩ
MIN
100 kΩ
Treble
MAX
VCC+
+
TL062
0.03 µF
0.003 µF
VCC−
VCC−
10 kΩ
Balance
10 pF
75 µF
47 kΩ
+
50 pF
Output
−
10 pF
5 kΩ
Gain
+
68 kΩ
47 µF
Figure 27. IC Preamplifier
POST OFFICE BOX 655303
• DALLAS, TEXAS 75265
19
PACKAGE OPTION ADDENDUM
www.ti.com
6-Dec-2006
PACKAGING INFORMATION
Orderable Device
Status (1)
Package
Type
Package
Drawing
Pins Package Eco Plan (2)
Qty
81023012A
OBSOLETE
LCCC
FK
20
81023022A
ACTIVE
LCCC
FK
20
1
TBD
8102302HA
ACTIVE
CFP
U
10
1
TBD
A42 SNPB
N / A for Pkg Type
8102302PA
ACTIVE
CDIP
JG
8
1
TBD
A42 SNPB
N / A for Pkg Type
81023032A
ACTIVE
LCCC
FK
20
1
TBD
8102303CA
ACTIVE
CDIP
J
14
1
TBD
A42 SNPB
N / A for Pkg Type
8102303DA
ACTIVE
CFP
W
14
1
TBD
A42 SNPB
N / A for Pkg Type
TL061ACD
ACTIVE
SOIC
D
8
75
Green (RoHS &
no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
TL061ACDE4
ACTIVE
SOIC
D
8
75
Green (RoHS &
no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
TL061ACDR
ACTIVE
SOIC
D
8
2500 Green (RoHS &
no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
TL061ACDRE4
ACTIVE
SOIC
D
8
2500 Green (RoHS &
no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
TL061ACP
ACTIVE
PDIP
P
8
50
Pb-Free
(RoHS)
CU NIPDAU
N / A for Pkg Type
TL061ACPE4
ACTIVE
PDIP
P
8
50
Pb-Free
(RoHS)
CU NIPDAU
N / A for Pkg Type
TL061ACPSR
ACTIVE
SO
PS
8
2000 Green (RoHS &
no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
TL061ACPSRE4
ACTIVE
SO
PS
8
2000 Green (RoHS &
no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
TL061BCD
OBSOLETE
SOIC
D
8
TBD
Call TI
TL061BCP
ACTIVE
PDIP
P
8
50
Pb-Free
(RoHS)
CU NIPDAU
N / A for Pkg Type
TL061BCPE4
ACTIVE
PDIP
P
8
50
Pb-Free
(RoHS)
CU NIPDAU
N / A for Pkg Type
TL061CD
ACTIVE
SOIC
D
8
75
Green (RoHS &
no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
TL061CDE4
ACTIVE
SOIC
D
8
75
Green (RoHS &
no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
TL061CDR
ACTIVE
SOIC
D
8
2500 Green (RoHS &
no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
TL061CDRE4
ACTIVE
SOIC
D
8
2500 Green (RoHS &
no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
TL061CP
ACTIVE
PDIP
P
8
50
Pb-Free
(RoHS)
CU NIPDAU
N / A for Pkg Type
TL061CPE4
ACTIVE
PDIP
P
8
50
Pb-Free
(RoHS)
CU NIPDAU
N / A for Pkg Type
TL061CPSR
ACTIVE
SO
PS
8
2000 Green (RoHS &
no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
TL061CPSRE4
ACTIVE
SO
PS
8
2000 Green (RoHS &
no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
TL061CPWLE
OBSOLETE
TSSOP
PW
8
TBD
Call TI
TL061ID
ACTIVE
SOIC
D
8
75
Green (RoHS &
no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
TL061IDE4
ACTIVE
SOIC
D
8
75
Green (RoHS &
CU NIPDAU
Level-1-260C-UNLIM
TBD
Addendum-Page 1
Lead/Ball Finish
Call TI
MSL Peak Temp (3)
Call TI
POST-PLATE N / A for Pkg Type
POST-PLATE N / A for Pkg Type
Call TI
Call TI
PACKAGE OPTION ADDENDUM
www.ti.com
6-Dec-2006
Orderable Device
Status (1)
Package
Type
Package
Drawing
Pins Package Eco Plan (2)
Qty
TL061IDR
ACTIVE
SOIC
D
8
2500 Green (RoHS &
no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
TL061IDRE4
ACTIVE
SOIC
D
8
2500 Green (RoHS &
no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
TL061IP
ACTIVE
PDIP
P
8
50
Pb-Free
(RoHS)
CU NIPDAU
N / A for Pkg Type
TL061IPE4
ACTIVE
PDIP
P
8
50
Pb-Free
(RoHS)
CU NIPDAU
N / A for Pkg Type
Lead/Ball Finish
MSL Peak Temp (3)
no Sb/Br)
TL061MJG
OBSOLETE
CDIP
JG
8
TBD
Call TI
Call TI
TL061MJGB
OBSOLETE
CDIP
JG
8
TBD
Call TI
Call TI
TL062ACD
ACTIVE
SOIC
D
8
75
Green (RoHS &
no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
TL062ACDE4
ACTIVE
SOIC
D
8
75
Green (RoHS &
no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
TL062ACDR
ACTIVE
SOIC
D
8
2500 Green (RoHS &
no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
TL062ACDRE4
ACTIVE
SOIC
D
8
2500 Green (RoHS &
no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
TL062ACJG
OBSOLETE
CDIP
JG
8
TL062ACP
ACTIVE
PDIP
P
8
TL062ACPE4
ACTIVE
PDIP
P
8
TL062ACPSR
ACTIVE
SO
PS
8
TL062ACPSRE4
ACTIVE
SO
PS
8
TL062BCD
ACTIVE
SOIC
D
8
75
TL062BCDE4
ACTIVE
SOIC
D
8
75
TL062BCDR
ACTIVE
SOIC
D
TL062BCDRE4
ACTIVE
SOIC
TL062BCP
ACTIVE
TL062BCPE4
TBD
Call TI
50
Pb-Free
(RoHS)
CU NIPDAU
N / A for Pkg Type
50
Pb-Free
(RoHS)
CU NIPDAU
N / A for Pkg Type
2000 Green (RoHS &
no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
2000 Green (RoHS &
no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
Green (RoHS &
no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
Green (RoHS &
no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
8
2500 Green (RoHS &
no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
D
8
2500 Green (RoHS &
no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
PDIP
P
8
50
Pb-Free
(RoHS)
CU NIPDAU
N / A for Pkg Type
ACTIVE
PDIP
P
8
50
Pb-Free
(RoHS)
CU NIPDAU
N / A for Pkg Type
TL062CD
ACTIVE
SOIC
D
8
75
Green (RoHS &
no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
TL062CDE4
ACTIVE
SOIC
D
8
75
Green (RoHS &
no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
TL062CDG4
ACTIVE
SOIC
D
8
75
Green (RoHS &
no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
TL062CDR
ACTIVE
SOIC
D
8
2500 Green (RoHS &
no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
TL062CDRE4
ACTIVE
SOIC
D
8
2500 Green (RoHS &
no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
TL062CDRG4
ACTIVE
SOIC
D
8
2500 Green (RoHS &
CU NIPDAU
Level-1-260C-UNLIM
Addendum-Page 2
Call TI
PACKAGE OPTION ADDENDUM
www.ti.com
6-Dec-2006
Orderable Device
Status (1)
Package
Type
Package
Drawing
Pins Package Eco Plan (2)
Qty
TL062CJG
OBSOLETE
CDIP
JG
8
TL062CP
ACTIVE
PDIP
P
8
TL062CPE4
ACTIVE
PDIP
P
8
TL062CPSLE
OBSOLETE
SO
PS
8
TL062CPSR
ACTIVE
SO
PS
8
2000 Green (RoHS &
no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
TL062CPSRE4
ACTIVE
SO
PS
8
2000 Green (RoHS &
no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
TL062CPW
ACTIVE
TSSOP
PW
8
150
Green (RoHS &
no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
TL062CPWE4
ACTIVE
TSSOP
PW
8
150
Green (RoHS &
no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
TL062CPWLE
OBSOLETE
TSSOP
PW
8
TBD
Call TI
TL062CPWR
ACTIVE
TSSOP
PW
8
2000 Green (RoHS &
no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
TL062CPWRE4
ACTIVE
TSSOP
PW
8
2000 Green (RoHS &
no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
TL062CPWRG4
ACTIVE
TSSOP
PW
8
2000 Green (RoHS &
no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
TL062ID
ACTIVE
SOIC
D
8
75
Green (RoHS &
no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
TL062IDE4
ACTIVE
SOIC
D
8
75
Green (RoHS &
no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
TL062IDG4
ACTIVE
SOIC
D
8
75
Green (RoHS &
no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
TL062IDR
ACTIVE
SOIC
D
8
2500 Green (RoHS &
no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
TL062IDRE4
ACTIVE
SOIC
D
8
2500 Green (RoHS &
no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
TL062IDRG4
ACTIVE
SOIC
D
8
2500 Green (RoHS &
no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
TL062IJG
OBSOLETE
CDIP
JG
8
TBD
Call TI
TL062IP
ACTIVE
PDIP
P
8
50
Pb-Free
(RoHS)
CU NIPDAU
N / A for Pkg Type
TL062IPE4
ACTIVE
PDIP
P
8
50
Pb-Free
(RoHS)
CU NIPDAU
N / A for Pkg Type
TL062IPWR
ACTIVE
TSSOP
PW
8
2000 Green (RoHS &
no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
TL062IPWRE4
ACTIVE
TSSOP
PW
8
2000 Green (RoHS &
no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
TL062MFKB
ACTIVE
LCCC
FK
20
1
TBD
Lead/Ball Finish
MSL Peak Temp (3)
no Sb/Br)
TBD
Call TI
50
Pb-Free
(RoHS)
CU NIPDAU
N / A for Pkg Type
50
Pb-Free
(RoHS)
CU NIPDAU
N / A for Pkg Type
TBD
Call TI
Call TI
Call TI
Call TI
Call TI
POST-PLATE N / A for Pkg Type
TL062MJG
ACTIVE
CDIP
JG
8
1
TBD
A42 SNPB
N / A for Pkg Type
TL062MJGB
ACTIVE
CDIP
JG
8
1
TBD
A42 SNPB
N / A for Pkg Type
TL064ACD
ACTIVE
SOIC
D
14
50
Green (RoHS &
no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
TL064ACDE4
ACTIVE
SOIC
D
14
50
Green (RoHS &
no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
Addendum-Page 3
PACKAGE OPTION ADDENDUM
www.ti.com
6-Dec-2006
Orderable Device
Status (1)
Package
Type
Package
Drawing
Pins Package Eco Plan (2)
Qty
TL064ACDR
ACTIVE
SOIC
D
14
2500 Green (RoHS &
no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
TL064ACDRE4
ACTIVE
SOIC
D
14
2500 Green (RoHS &
no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
TL064ACN
ACTIVE
PDIP
N
14
25
Pb-Free
(RoHS)
CU NIPDAU
N / A for Pkg Type
TL064ACNE4
ACTIVE
PDIP
N
14
25
Pb-Free
(RoHS)
CU NIPDAU
N / A for Pkg Type
TL064BCD
ACTIVE
SOIC
D
14
50
Green (RoHS &
no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
TL064BCDE4
ACTIVE
SOIC
D
14
50
Green (RoHS &
no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
TL064BCDR
ACTIVE
SOIC
D
14
2500 Green (RoHS &
no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
TL064BCDRE4
ACTIVE
SOIC
D
14
2500 Green (RoHS &
no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
TL064BCN
ACTIVE
PDIP
N
14
25
Pb-Free
(RoHS)
CU NIPDAU
N / A for Pkg Type
TL064BCNE4
ACTIVE
PDIP
N
14
25
Pb-Free
(RoHS)
CU NIPDAU
N / A for Pkg Type
TL064CD
ACTIVE
SOIC
D
14
50
Green (RoHS &
no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
TL064CDBR
ACTIVE
SSOP
DB
14
2000 Green (RoHS &
no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
TL064CDBRE4
ACTIVE
SSOP
DB
14
2000 Green (RoHS &
no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
TL064CDE4
ACTIVE
SOIC
D
14
Green (RoHS &
no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
TL064CDR
ACTIVE
SOIC
D
14
2500 Green (RoHS &
no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
TL064CDRE4
ACTIVE
SOIC
D
14
2500 Green (RoHS &
no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
TL064CN
ACTIVE
PDIP
N
14
25
Pb-Free
(RoHS)
CU NIPDAU
N / A for Pkg Type
TL064CNE4
ACTIVE
PDIP
N
14
25
Pb-Free
(RoHS)
CU NIPDAU
N / A for Pkg Type
TL064CNSR
ACTIVE
SO
NS
14
2000 Green (RoHS &
no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
TL064CNSRE4
ACTIVE
SO
NS
14
2000 Green (RoHS &
no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
TL064CPW
ACTIVE
TSSOP
PW
14
90
Green (RoHS &
no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
TL064CPWE4
ACTIVE
TSSOP
PW
14
90
Green (RoHS &
no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
TL064CPWLE
OBSOLETE
TSSOP
PW
14
TL064CPWR
ACTIVE
TSSOP
PW
14
2000 Green (RoHS &
no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
TL064CPWRE4
ACTIVE
TSSOP
PW
14
2000 Green (RoHS &
no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
TL064ID
ACTIVE
SOIC
D
14
CU NIPDAU
Level-1-260C-UNLIM
50
TBD
50
Addendum-Page 4
Green (RoHS &
no Sb/Br)
Lead/Ball Finish
Call TI
MSL Peak Temp (3)
Call TI
PACKAGE OPTION ADDENDUM
www.ti.com
6-Dec-2006
Orderable Device
Status (1)
Package
Type
Package
Drawing
Pins Package Eco Plan (2)
Qty
TL064IDE4
ACTIVE
SOIC
D
14
50
Green (RoHS &
no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
TL064IDG4
ACTIVE
SOIC
D
14
50
Green (RoHS &
no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
TL064IDR
ACTIVE
SOIC
D
14
2500 Green (RoHS &
no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
TL064IDRE4
ACTIVE
SOIC
D
14
2500 Green (RoHS &
no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
TL064IDRG4
ACTIVE
SOIC
D
14
2500 Green (RoHS &
no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
TL064IN
ACTIVE
PDIP
N
14
25
Pb-Free
(RoHS)
CU NIPDAU
N / A for Pkg Type
TL064INE4
ACTIVE
PDIP
N
14
25
Pb-Free
(RoHS)
CU NIPDAU
N / A for Pkg Type
TL064INS
ACTIVE
SO
NS
14
50
Green (RoHS &
no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
TL064INSG4
ACTIVE
SO
NS
14
50
Green (RoHS &
no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
TL064INSR
ACTIVE
SO
NS
14
2000 Green (RoHS &
no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
TL064INSRG4
ACTIVE
SO
NS
14
2000 Green (RoHS &
no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
TL064MFK
ACTIVE
LCCC
FK
20
1
TBD
POST-PLATE N / A for Pkg Type
TL064MFKB
ACTIVE
LCCC
FK
20
1
TBD
POST-PLATE N / A for Pkg Type
TL064MJ
ACTIVE
CDIP
J
14
1
TBD
A42 SNPB
N / A for Pkg Type
TL064MJB
ACTIVE
CDIP
J
14
1
TBD
A42 SNPB
N / A for Pkg Type
TL064MWB
ACTIVE
CFP
W
14
1
TBD
A42 SNPB
N / A for Pkg Type
Lead/Ball Finish
MSL Peak Temp (3)
(1)
The marketing status values are defined as follows:
ACTIVE: Product device recommended for new designs.
LIFEBUY: TI has announced that the device will be discontinued, and a lifetime-buy period is in effect.
NRND: Not recommended for new designs. Device is in production to support existing customers, but TI does not recommend using this part in
a new design.
PREVIEW: Device has been announced but is not in production. Samples may or may not be available.
OBSOLETE: TI has discontinued the production of the device.
(2)
Eco Plan - The planned eco-friendly classification: Pb-Free (RoHS), Pb-Free (RoHS Exempt), or Green (RoHS & no Sb/Br) - please check
http://www.ti.com/productcontent for the latest availability information and additional product content details.
TBD: The Pb-Free/Green conversion plan has not been defined.
Pb-Free (RoHS): TI's terms "Lead-Free" or "Pb-Free" mean semiconductor products that are compatible with the current RoHS requirements
for all 6 substances, including the requirement that lead not exceed 0.1% by weight in homogeneous materials. Where designed to be soldered
at high temperatures, TI Pb-Free products are suitable for use in specified lead-free processes.
Pb-Free (RoHS Exempt): This component has a RoHS exemption for either 1) lead-based flip-chip solder bumps used between the die and
package, or 2) lead-based die adhesive used between the die and leadframe. The component is otherwise considered Pb-Free (RoHS
compatible) as defined above.
Green (RoHS & no Sb/Br): TI defines "Green" to mean Pb-Free (RoHS compatible), and free of Bromine (Br) and Antimony (Sb) based flame
retardants (Br or Sb do not exceed 0.1% by weight in homogeneous material)
(3)
MSL, Peak Temp. -- The Moisture Sensitivity Level rating according to the JEDEC industry standard classifications, and peak solder
temperature.
Important Information and Disclaimer:The information provided on this page represents TI's knowledge and belief as of the date that it is
provided. TI bases its knowledge and belief on information provided by third parties, and makes no representation or warranty as to the
accuracy of such information. Efforts are underway to better integrate information from third parties. TI has taken and continues to take
Addendum-Page 5
PACKAGE OPTION ADDENDUM
www.ti.com
6-Dec-2006
reasonable steps to provide representative and accurate information but may not have conducted destructive testing or chemical analysis on
incoming materials and chemicals. TI and TI suppliers consider certain information to be proprietary, and thus CAS numbers and other limited
information may not be available for release.
In no event shall TI's liability arising out of such information exceed the total purchase price of the TI part(s) at issue in this document sold by TI
to Customer on an annual basis.
Addendum-Page 6
MECHANICAL DATA
MCER001A – JANUARY 1995 – REVISED JANUARY 1997
JG (R-GDIP-T8)
CERAMIC DUAL-IN-LINE
0.400 (10,16)
0.355 (9,00)
8
5
0.280 (7,11)
0.245 (6,22)
1
0.063 (1,60)
0.015 (0,38)
4
0.065 (1,65)
0.045 (1,14)
0.310 (7,87)
0.290 (7,37)
0.020 (0,51) MIN
0.200 (5,08) MAX
Seating Plane
0.130 (3,30) MIN
0.023 (0,58)
0.015 (0,38)
0°–15°
0.100 (2,54)
0.014 (0,36)
0.008 (0,20)
4040107/C 08/96
NOTES: A.
B.
C.
D.
E.
All linear dimensions are in inches (millimeters).
This drawing is subject to change without notice.
This package can be hermetically sealed with a ceramic lid using glass frit.
Index point is provided on cap for terminal identification.
Falls within MIL STD 1835 GDIP1-T8
POST OFFICE BOX 655303
• DALLAS, TEXAS 75265
MECHANICAL DATA
MLCC006B – OCTOBER 1996
FK (S-CQCC-N**)
LEADLESS CERAMIC CHIP CARRIER
28 TERMINAL SHOWN
18
17
16
15
14
13
NO. OF
TERMINALS
**
12
19
11
20
10
A
B
MIN
MAX
MIN
MAX
20
0.342
(8,69)
0.358
(9,09)
0.307
(7,80)
0.358
(9,09)
28
0.442
(11,23)
0.458
(11,63)
0.406
(10,31)
0.458
(11,63)
21
9
22
8
44
0.640
(16,26)
0.660
(16,76)
0.495
(12,58)
0.560
(14,22)
23
7
52
0.739
(18,78)
0.761
(19,32)
0.495
(12,58)
0.560
(14,22)
24
6
68
0.938
(23,83)
0.962
(24,43)
0.850
(21,6)
0.858
(21,8)
84
1.141
(28,99)
1.165
(29,59)
1.047
(26,6)
1.063
(27,0)
B SQ
A SQ
25
5
26
27
28
1
2
3
4
0.080 (2,03)
0.064 (1,63)
0.020 (0,51)
0.010 (0,25)
0.020 (0,51)
0.010 (0,25)
0.055 (1,40)
0.045 (1,14)
0.045 (1,14)
0.035 (0,89)
0.045 (1,14)
0.035 (0,89)
0.028 (0,71)
0.022 (0,54)
0.050 (1,27)
4040140 / D 10/96
NOTES: A.
B.
C.
D.
E.
All linear dimensions are in inches (millimeters).
This drawing is subject to change without notice.
This package can be hermetically sealed with a metal lid.
The terminals are gold plated.
Falls within JEDEC MS-004
POST OFFICE BOX 655303
• DALLAS, TEXAS 75265
MECHANICAL DATA
MPDI001A – JANUARY 1995 – REVISED JUNE 1999
P (R-PDIP-T8)
PLASTIC DUAL-IN-LINE
0.400 (10,60)
0.355 (9,02)
8
5
0.260 (6,60)
0.240 (6,10)
1
4
0.070 (1,78) MAX
0.325 (8,26)
0.300 (7,62)
0.020 (0,51) MIN
0.015 (0,38)
Gage Plane
0.200 (5,08) MAX
Seating Plane
0.010 (0,25) NOM
0.125 (3,18) MIN
0.100 (2,54)
0.021 (0,53)
0.015 (0,38)
0.430 (10,92)
MAX
0.010 (0,25) M
4040082/D 05/98
NOTES: A. All linear dimensions are in inches (millimeters).
B. This drawing is subject to change without notice.
C. Falls within JEDEC MS-001
For the latest package information, go to http://www.ti.com/sc/docs/package/pkg_info.htm
POST OFFICE BOX 655303
• DALLAS, TEXAS 75265
MECHANICAL DATA
MSSO002E – JANUARY 1995 – REVISED DECEMBER 2001
DB (R-PDSO-G**)
PLASTIC SMALL-OUTLINE
28 PINS SHOWN
0,38
0,22
0,65
28
0,15 M
15
0,25
0,09
8,20
7,40
5,60
5,00
Gage Plane
1
14
0,25
A
0°–ā8°
0,95
0,55
Seating Plane
2,00 MAX
0,10
0,05 MIN
PINS **
14
16
20
24
28
30
38
A MAX
6,50
6,50
7,50
8,50
10,50
10,50
12,90
A MIN
5,90
5,90
6,90
7,90
9,90
9,90
12,30
DIM
4040065 /E 12/01
NOTES: A.
B.
C.
D.
All linear dimensions are in millimeters.
This drawing is subject to change without notice.
Body dimensions do not include mold flash or protrusion not to exceed 0,15.
Falls within JEDEC MO-150
POST OFFICE BOX 655303
• DALLAS, TEXAS 75265
MECHANICAL DATA
MTSS001C – JANUARY 1995 – REVISED FEBRUARY 1999
PW (R-PDSO-G**)
PLASTIC SMALL-OUTLINE PACKAGE
14 PINS SHOWN
0,30
0,19
0,65
14
0,10 M
8
0,15 NOM
4,50
4,30
6,60
6,20
Gage Plane
0,25
1
7
0°– 8°
A
0,75
0,50
Seating Plane
0,15
0,05
1,20 MAX
PINS **
0,10
8
14
16
20
24
28
A MAX
3,10
5,10
5,10
6,60
7,90
9,80
A MIN
2,90
4,90
4,90
6,40
7,70
9,60
DIM
4040064/F 01/97
NOTES: A.
B.
C.
D.
All linear dimensions are in millimeters.
This drawing is subject to change without notice.
Body dimensions do not include mold flash or protrusion not to exceed 0,15.
Falls within JEDEC MO-153
POST OFFICE BOX 655303
• DALLAS, TEXAS 75265
IMPORTANT NOTICE
Texas Instruments Incorporated and its subsidiaries (TI) reserve the right to make corrections, modifications,
enhancements, improvements, and other changes to its products and services at any time and to discontinue
any product or service without notice. Customers should obtain the latest relevant information before placing
orders and should verify that such information is current and complete. All products are sold subject to TI’s terms
and conditions of sale supplied at the time of order acknowledgment.
TI warrants performance of its hardware products to the specifications applicable at the time of sale in
accordance with TI’s standard warranty. Testing and other quality control techniques are used to the extent TI
deems necessary to support this warranty. Except where mandated by government requirements, testing of all
parameters of each product is not necessarily performed.
TI assumes no liability for applications assistance or customer product design. Customers are responsible for
their products and applications using TI components. To minimize the risks associated with customer products
and applications, customers should provide adequate design and operating safeguards.
TI does not warrant or represent that any license, either express or implied, is granted under any TI patent right,
copyright, mask work right, or other TI intellectual property right relating to any combination, machine, or process
in which TI products or services are used. Information published by TI regarding third-party products or services
does not constitute a license from TI to use such products or services or a warranty or endorsement thereof.
Use of such information may require a license from a third party under the patents or other intellectual property
of the third party, or a license from TI under the patents or other intellectual property of TI.
Reproduction of information in TI data books or data sheets is permissible only if reproduction is without
alteration and is accompanied by all associated warranties, conditions, limitations, and notices. Reproduction
of this information with alteration is an unfair and deceptive business practice. TI is not responsible or liable for
such altered documentation.
Resale of TI products or services with statements different from or beyond the parameters stated by TI for that
product or service voids all express and any implied warranties for the associated TI product or service and
is an unfair and deceptive business practice. TI is not responsible or liable for any such statements.
Following are URLs where you can obtain information on other Texas Instruments products and application
solutions:
Products
Applications
Amplifiers
amplifier.ti.com
Audio
www.ti.com/audio
Data Converters
dataconverter.ti.com
Automotive
www.ti.com/automotive
DSP
dsp.ti.com
Broadband
www.ti.com/broadband
Interface
interface.ti.com
Digital Control
www.ti.com/digitalcontrol
Logic
logic.ti.com
Military
www.ti.com/military
Power Mgmt
power.ti.com
Optical Networking
www.ti.com/opticalnetwork
Microcontrollers
microcontroller.ti.com
Security
www.ti.com/security
Low Power Wireless www.ti.com/lpw
Mailing Address:
Telephony
www.ti.com/telephony
Video & Imaging
www.ti.com/video
Wireless
www.ti.com/wireless
Texas Instruments
Post Office Box 655303 Dallas, Texas 75265
Copyright  2006, Texas Instruments Incorporated