TI TVP5147M1PFPR

y !" #$%E %& '(
)%*+$& % % ,( Data Manual
March 2007
Digital Audio Video
SLES140A
IMPORTANT NOTICE
Texas Instruments Incorporated and its subsidiaries (TI) reserve the right to make corrections, modifications,
enhancements, improvements, and other changes to its products and services at any time and to discontinue
any product or service without notice. Customers should obtain the latest relevant information before placing
orders and should verify that such information is current and complete. All products are sold subject to TI’s terms
and conditions of sale supplied at the time of order acknowledgment.
TI warrants performance of its hardware products to the specifications applicable at the time of sale in
accordance with TI’s standard warranty. Testing and other quality control techniques are used to the extent TI
deems necessary to support this warranty. Except where mandated by government requirements, testing of all
parameters of each product is not necessarily performed.
TI assumes no liability for applications assistance or customer product design. Customers are responsible for
their products and applications using TI components. To minimize the risks associated with customer products
and applications, customers should provide adequate design and operating safeguards.
TI does not warrant or represent that any license, either express or implied, is granted under any TI patent right,
copyright, mask work right, or other TI intellectual property right relating to any combination, machine, or process
in which TI products or services are used. Information published by TI regarding third-party products or services
does not constitute a license from TI to use such products or services or a warranty or endorsement thereof.
Use of such information may require a license from a third party under the patents or other intellectual property
of the third party, or a license from TI under the patents or other intellectual property of TI.
Reproduction of information in TI data books or data sheets is permissible only if reproduction is without
alteration and is accompanied by all associated warranties, conditions, limitations, and notices. Reproduction
of this information with alteration is an unfair and deceptive business practice. TI is not responsible or liable for
such altered documentation.
Resale of TI products or services with statements different from or beyond the parameters stated by TI for that
product or service voids all express and any implied warranties for the associated TI product or service and
is an unfair and deceptive business practice. TI is not responsible or liable for any such statements.
Following are URLs where you can obtain information on other Texas Instruments products and application
solutions:
Products
Applications
Amplifiers
amplifier.ti.com
Audio
www.ti.com/audio
Data Converters
dataconverter.ti.com
Automotive
www.ti.com/automotive
DSP
dsp.ti.com
Broadband
www.ti.com/broadband
Interface
interface.ti.com
Digital Control
www.ti.com/digitalcontrol
Logic
logic.ti.com
Military
www.ti.com/military
Power Mgmt
power.ti.com
Optical Networking
www.ti.com/opticalnetwork
Microcontrollers
microcontroller.ti.com
Security
www.ti.com/security
Low Power Wireless www.ti.com/lpw
Mailing Address:
Telephony
www.ti.com/telephony
Video & Imaging
www.ti.com/video
Wireless
www.ti.com/wireless
Texas Instruments
Post Office Box 655303 Dallas, Texas 75265
Copyright  2007, Texas Instruments Incorporated
Contents
Contents
Section
1
2
Page
Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
1.1
Detailed Functionality . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
1.2
TVP5147M1 Applications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
1.3
Related Products . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
1.4
Ordering Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
1.5
Functional Block Diagram . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
1.6
Terminal Assignments . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
1.7
Terminal Functions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Functional Description . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
2.1
Analog Processing and A/D Converters . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
2.1.1
Video Input Switch Control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
2.1.2
Analog Input Clamping . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
2.1.3
Automatic Gain Control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
2.1.4
Analog Video Output . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
2.1.5
A/D Converters . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
2.2
Digital Video Processing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
2.2.1
2y Decimation Filter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
2.2.2
Composite Processor . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
2.2.3
Luminance Processing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
2.2.4
Color Transient Improvement . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
2.3
Clock Circuits . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
2.4
Real-Time Control (RTC) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
2.5
Output Formatter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
2.5.1
Separate Syncs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
2.5.2
Embedded Syncs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
2.6
I2C Host Interface . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
2.6.1
Reset and I2C Bus Address Selection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
2.6.2
I2C Operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
2.6.3
VBUS Access . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
2.7
VBI Data Processor . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
2.7.1
VBI FIFO and Ancillary Data in Video Stream . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
2.7.2
VBI Raw Data Output . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
2.8
Reset and Initialization . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
2.9
Adjusting External Syncs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
2.10
Internal Control Registers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
2.11
Register Definitions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
2.11.1
Input Select Register . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
2.11.2
AFE Gain Control Register . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
2.11.3
Video Standard Register . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
2.11.4
Operation Mode Register . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
2.11.5
Autoswitch Mask Register . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
2.11.6
Color Killer Register . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
2.11.7
Luminance Processing Control 1 Register . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
2.11.8
Luminance Processing Control 2 Register . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
2.11.9
Luminance Processing Control 3 Register . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
2.11.10
Luminance Brightness Register . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
July 2005
SLES140
1
2
3
3
3
4
5
6
9
9
9
10
10
10
10
11
11
11
14
14
15
15
15
16
21
21
22
22
22
24
25
26
26
27
27
31
31
32
32
33
33
34
34
35
35
35
iii
Contents
Section
Page
2.11.11
2.11.12
2.11.13
2.11.14
2.11.15
2.11.16
2.11.17
2.11.18
2.11.19
2.11.20
2.11.21
2.11.22
2.11.23
2.11.24
2.11.25
2.11.26
2.11.27
2.11.28
2.11.29
2.11.30
2.11.31
2.11.32
2.11.33
2.11.34
2.11.35
2.11.36
2.11.37
2.11.38
2.11.39
2.11.40
2.11.41
2.11.42
2.11.43
2.11.44
2.11.45
2.11.46
2.11.47
2.11.48
2.11.49
2.11.50
2.11.51
2.11.52
2.11.53
2.11.54
2.11.55
2.11.56
2.11.57
2.11.58
iv
SLES140
Luminance Contrast Register . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Chrominance Saturation Register . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Chroma Hue Register . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Chrominance Processing Control 1 Register . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Chrominance Processing Control 2 Register . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
AVID Start Pixel Register . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
AVID Stop Pixel Register . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
HSYNC Start Pixel Register . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
HSYNC Stop Pixel Register . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
VSYNC Start Line Register . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
VSYNC Stop Line Register . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
VBLK Start Line Register . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
VBLK Stop Line Register . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
CTI Delay Register . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
CTI Control Register . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Sync Control Register . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Output Formatter 1 Register . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Output Formatter 2 Register . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Output Formatter 3 Register . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Output Formatter 4 Register . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Output Formatter 5 Register . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Output Formatter 6 Register . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Clear Lost Lock Detect Register . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Status 1 Register . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Status 2 Register . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
AGC Gain Status Register . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Video Standard Status Register . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
GPIO Input 1 Register . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
GPIO Input 2 Register . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
AFE Coarse Gain for CH 1 Register . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
AFE Coarse Gain for CH 2 Register . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
AFE Coarse Gain for CH 3 Register . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
AFE Coarse Gain for CH 4 Register . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
AFE Fine Gain for Pb Register . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
AFE Fine Gain for Y_Chroma Register . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
AFE Fine Gain for Pr Register . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
AFE Fine Gain for CVBS_Luma Register . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Field ID Control Register . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
F-bit and V-bit Control 1 Register . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Back-End AGC Control Register . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
AGC Decrement Speed Control Register . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
ROM Version Register . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
AGC White Peak Processing Register . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
F and V Bit Control Register . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
VCR Trick Mode Control Register . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Horizontal Shake Increment Register . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
AGC Increment Speed Register . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
AGC Increment Delay Register . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
36
36
36
36
37
37
38
38
38
38
39
39
39
39
40
40
41
41
42
43
44
45
45
46
47
47
48
48
49
50
50
51
51
52
52
52
53
53
54
55
55
55
56
57
58
58
58
58
July 2005
Contents
Section
3
Page
2.11.59
Analog Output Control 1 Register . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
2.11.60
Chip ID MSB Register . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
2.11.61
Chip ID LSB Register . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
2.11.62
CPLL Speed Control Register . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
2.11.63
Status Request Register . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
2.11.64
Vertical Line Count Register . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
2.11.65
AGC Decrement Delay Register . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
2.11.66
VDP TTX Filter And Mask Registers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
2.11.67
VDP TTX Filter Control Register . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
2.11.68
VDP FIFO Word Count Register . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
2.11.69
VDP FIFO Interrupt Threshold Register . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
2.11.70
VDP FIFO Reset Register . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
2.11.71
VDP FIFO Output Control Register . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
2.11.72
VDP Line Number Interrupt Register . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
2.11.73
VDP Pixel Alignment Register . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
2.11.74
VDP Line Start Register . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
2.11.75
VDP Line Stop Register . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
2.11.76
VDP Global Line Mode Register . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
2.11.77
VDP Full Field Enable Register . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
2.11.78
VDP Full Field Mode Register . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
2.11.79
VBUS Data Access With No VBUS Address Increment Register . . . . . . . . . . . . . . .
2.11.80
VBUS Data Access With VBUS Address Increment Register . . . . . . . . . . . . . . . . . .
2.11.81
FIFO Read Data Register . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
2.11.82
VBUS Address Access Register . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
2.11.83
Interrupt Raw Status 0 Register . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
2.11.84
Interrupt Raw Status 1 Register . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
2.11.85
Interrupt Status 0 Register . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
2.11.86
Interrupt Status 1 Register . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
2.11.87
Interrupt Mask 0 Register . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
2.11.88
Interrupt Mask 1 Register . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
2.11.89
Interrupt Clear 0 Register . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
2.11.90
Interrupt Clear 1 Register . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
2.12
VBUS Register Definitions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
2.12.1
VDP Closed Caption Data Register . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
2.12.2
VDP WSS Data Register . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
2.12.3
VDP VITC Data Register . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
2.12.4
VDP V-Chip TV Rating Block 1 Register . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
2.12.5
VDP V-Chip TV Rating Block 2 Register . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
2.12.6
VDP V-Chip TV Rating Block 3 Register . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
2.12.7
VDP V-CHIP MPAA Rating Data Register . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
2.12.8
VDP General Line Mode and Line Address Register . . . . . . . . . . . . . . . . . . . . . . . . .
2.12.9
VDP VPS/Gemstar Data Register . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
2.12.10 Analog Output Control 2 Register . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
2.12.11
Interrupt Configuration Register . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Electrical Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
3.1
Absolute Maximum Ratings† . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
3.2
Recommended Operating Conditions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
3.2.1
Crystal Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
July 2005
SLES140
59
59
59
59
60
60
60
61
62
63
64
64
64
64
65
65
65
65
66
66
66
66
67
67
67
68
68
69
70
71
71
72
73
73
73
74
74
74
75
75
76
77
78
78
79
79
79
79
v
Contents
Section
Page
3.3
80
80
80
81
83
83
83
83
83
83
83
84
84
84
87
87
88
4
5
vi
Electrical Characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
3.3.1
DC Electrical Characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
3.3.2
Analog Processing and A/D Converters . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
3.3.3
Timing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Example Register Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
4.1
Example 1 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
4.1.1
Assumptions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
4.1.2
Recommended Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
4.2
Example 2 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
4.2.1
Assumptions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
4.2.2
Recommended Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
4.3
Example 3 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
4.3.1
Assumptions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
4.3.2
Recommended Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Application Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
5.1
Application Example . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
5.2
Designing With PowerPAD Devices . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
SLES140
July 2005
List of Illustrations
List of Illustrations
Figure
1−1
1−2
2−1
2−2
2−3
2−4
2−5
2−6
2−7
2−8
2−9
2−10
2−11
2−12
2−13
2−14
2−15
2−16
2−17
2−18
2−19
3−1
3−2
5−1
Title
Page
Functional Block Diagram . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Terminal Assignments Diagram . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Analog Processors and A/D Converters . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Digital Video Processing Block Diagram . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Composite and S-Video Processing Block Diagram . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Color Low-Pass Filter Frequency Response . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Color Low-Pass Filter With Filter Characteristics, NTSC/PAL ITU-R BT.601 Sampling . . . . . . . . .
Chroma Trap Filter Frequency Response, NTSC ITU-R BT.601 Sampling . . . . . . . . . . . . . . . . . . . .
Chroma Trap Filter Frequency Response, PAL ITU-R BT.601 Sampling . . . . . . . . . . . . . . . . . . . . . .
Luminance Edge-Enhancer Peaking Block Diagram . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Peaking Filter Response, NTSC/PAL ITU-R BT.601 Sampling . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Reference Clock Configurations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
RTC Timing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Vertical Synchronization Signals for 525-Line System . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Vertical Synchronization Signals for 625-Line System . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Horizontal Synchronization Signals for 10-Bit 4:2:2 Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Horizontal Synchronization Signals for 20-Bit 4:2:2 Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
VSYNC Position With Respect to HSYNC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
VBUS Access . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Reset Timing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Teletext Filter Function . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Clocks, Video Data, and Sync Timing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
I2C Host Port Timing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Example Application Circuit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
July 2005
SLES140
4
5
9
11
12
13
13
13
13
14
14
15
15
17
18
19
20
21
23
26
63
81
81
87
vii
List of Tables
List of Tables
Table
Title
1−1
2−1
2−2
2−3
2−4
2−5
2−6
2−7
2−8
2−9
2−10
2−11
2−12
Terminal Functions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Output Format . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Summary of Line Frequencies, Data Rates, and Pixel/Line Counts . . . . . . . . . . . . . . . . . . . . . . . . .
EAV and SAV Sequence . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
I2C Host Interface Terminal Description . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
I2C Address Selection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Supported VBI System . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Ancillary Data Format and Sequence . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
VBI Raw Data Output Format . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Reset Sequence . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
I2C Register Summary . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
VBUS Register Summary . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Analog Channel and Video Mode Selection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
viii
SLES140
Page
6
16
16
21
22
22
24
25
26
26
27
30
31
July 2005
Introduction
1
Introduction
The TVP5147M1 device is a high-quality, single-chip digital video decoder that digitizes and decodes all
popular baseband analog video formats into digital component video. The TVP5147M1 decoder supports the
analog-to-digital (A/D) conversion of component YPbPr signals, as well as the A/D conversion and decoding
of NTSC, PAL, and SECAM composite and S-video into component YCbCr. This decoder includes two 10-bit
30-MSPS A/D converters (ADCs). Preceding each ADC in the device, the corresponding analog channel
contains an analog circuit that clamps the input to a reference voltage and applies a programmable gain and
offset. A total of 10 video input terminals can be configured to a combination of YPbPr, CVBS, or S-video video
inputs.
Composite or S-video signals are sampled at 2× the ITU-R BT.601 clock frequency, line-locked alignment, and
are then decimated to the 1× pixel rate. CVBS decoding uses five-line adaptive comb filtering for both the luma
and chroma data paths to reduce both cross-luma and cross-chroma artifacts. A chroma trap filter is also
available. On CVBS and S-video inputs, the user can control video characteristics such as contrast,
brightness, saturation, and hue via an I2C host port interface. Furthermore, luma peaking (sharpness) with
programmable gain is included, as well as a patented chroma transient improvement (CTI) circuit.
The following output formats can be selected: 20-bit 4:2:2 YCbCr or 10-bit 4:2:2 YCbCr.
The TVP5147M1 decoder generates synchronization, blanking, field, active video window, horizontal and
vertical syncs, clock, genlock (for downstream video encoder synchronization), host CPU interrupt and
programmable logic I/O signals, in addition to digital video outputs.
The TVP5147M1 decoder includes methods for advanced vertical blanking interval (VBI) data retrieval. The
VBI data processor (VDP) slices, parses, and performs error checking on teletext, closed caption (CC), and
other VBI data. A built-in FIFO stores up to 11 lines of teletext data, and with proper host port synchronization,
full-screen teletext retrieval is possible. The TVP5147M1 decoder can pass through the output formatter 2×
sampled raw luma data for host-based VBI processing.
The main blocks of the TVP5147M1 decoder include:
• Robust sync detection for weak and noisy signals as well as VCR trick modes
• Y/C separation by 2-D 5-line adaptive comb or chroma trap filter
• Two 10-bit, 30-MSPS A/D converters with analog preprocessors [clamp and automatic gain control
(AGC)]
• Analog video output
• Luminance processor
• Chrominance processor
• Clock/timing processor and power-down control
• Software-controlled power-saving standby mode
• Output formatter
• I2C host port interface
• VBI data processor
• Macrovision copy protection detection circuit (Type 1, 2, 3, and separate color stripe detection)
• 3.3-V tolerant digital I/O ports
Macrovision is a trademark of Macrovision Corporation.
Other trademarks are the property of their respective owners.
SLES140A—March 2007
TVP5147M1PFP
1
Introduction
1.1
Detailed Functionality
•
Two 30-MSPS, 10-bit A/D channels with programmable gain control
•
Supports NTSC (J, M, 4.43), PAL (B, D, G, H, I, M, N, Nc, 60) and SECAM (B, D, G, K, K1, L) CVBS, and
S-video
•
Supports analog component YPbPr video format with embedded sync
•
10 analog video input terminals for multisource connection
•
Supports analog video output
•
User-programmable video output formats
10-bit ITU-R BT.656 4:2:2 YCbCr with embedded syncs
−
10-bit 4:2:2 YCbCr with separate syncs
−
20-bit 4:2:2 YCbCr with separate syncs
−
2× sampled raw VBI data in active video during a vertical blanking period
−
Sliced VBI data during a vertical blanking period or active video period (full field mode)
•
HSYNC/VSYNC outputs with programmable position, polarity, width, and field ID (FID) output
•
Composite and S-video processing
•
2
−
−
Adaptive 2-D 5-line adaptive comb filter for composite video inputs; chroma-trap available
−
Automatic video standard detection (NTSC/PAL/SECAM) and switching
−
Luma-peaking with programmable gain
−
Patented chroma transient improvement (CTI)
−
Patented architecture for locking to weak, noisy, or unstable signals
−
Single 14.31818-MHz reference crystal for all standards
−
Line-locked internal pixel sampling clock generation with horizontal and vertical lock signal outputs
−
Genlock output RTC format for downstream video encoder synchronization
Certified Macrovision copy protection detection
TVP5147M1PFP
SLES140A—March 2007
Introduction
•
•
•
•
1.2
TVP5147M1 Applications
•
•
•
•
•
•
•
•
1.3
1.4
VBI data processor
− Teletext (NABTS, WST)
− CC and extended data service (EDS)
− Wide screen signaling (WSS)
− Copy generation management system (CGMS)
− Video program system (VPS/PDC)
− Vertical interval time code (VITC)
− Gemstar 1×/2× mode
− V-Chip decoding
− Register readback of CC, WSS (CGMS), VPS/PDC, VITC and Gemstar 1×/2× sliced data
I2C host port interface
Reduced power consumption: 1.8-V digital core, 3.3-V for digital I/O, and 1.8-V/3.3 V analog core with
power-save and power-down modes
80-terminal TQFP PowerPAD package
DLP projectors
Digital TV
LCD TV/monitors
DVD recorders
PVR
PC video cards
Video capture/video editing
Video conferencing
Related Products
•
TVP5146M2 NTSC/PAL/SECAM 2y10-Bit Digital VIdeo Decoder With MacrovisionE Detection,
YPbPr/RGB Inputs, and 5-Line Comb Filter (SLES141)
•
TVP5150AM1 Ultralow Power NTSC/PAL/SECAM Video Decoder With Robust Sync Detector (SLES098)
Ordering Information
PACKAGED DEVICES
TA
80-TERMINAL PLASTIC
FLAT-PACK PowerPADE PACKAGE
0°C to 70°C
TVP5147M1PFP
Gemstar is a trademark of Gemstar-TV Guide Intermational.
PowerPAD is a trademark of Texas Instruments.
SLES140A—March 2007
TVP5147M1PFP
3
Introduction
1.5
Functional Block Diagram
Copy
Protection
Detector
VBI
Data
Processor
CVBS/Y
Analog
Front End
CVBS/
C/Pb
VI_1_A
VI_1_B
Composite and S-Video Processor
VI_1_C
VI_2_A
CVBS/
Y
VI_2_B
VI_2_C
VI_3_A
CVBS/
C/Pr
Y/C
Separation
CVBS/Y
5-line
Adaptive
Comb
C/CbCr
Clamping
AGC
Y
C
Luma
Processing
Y[9:0]
YCbCr
Chroma
Processing
Output
Formatter
C[9:0]
M
U
X
2 × 11-Bit
ADC
VI_3_B
VI_3_C
CVBS/Y VI_4_A
GPIO
SDA
GLCO
Host
Interface
HS/CS
FID
VS/VBLK
AVID
RESETB
DATACLK
PWDN
XTAL2
XTAL1
Timing Processor
With Sync Detector
SCL
Sampling
Clock
Figure 1−1. Functional Block Diagram
4
TVP5147M1PFP
SLES140A—March 2007
Introduction
1.6
Terminal Assignments
VI_1_A
CH1_A18GND
CH1_A18VDD
PLL_A18GND
PLL_A18VDD
XTAL2
XTAL1
VS/VBLK/GPIO
HS/CS/GPIO
FID/GPIO
C_0/GPIO
C_1/GPIO
DGND
DVDD
C_2/GPIO
C_3/GPIO
C_4/GPIO
C_5/GPIO
IOGND
IOVDD
PFP PACKAGE
(TOP VIEW)
80 79 78 77 76 75 74 73 72 71 70 69 68 67 66 65 64 63 62 61
1
60
2
59
3
58
4
57
5
56
6
55
7
54
8
53
9
52
10
51
11
50
12
49
13
48
14
47
15
46
16
45
17
44
18
43
19
42
20
41
21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40
C_6/GPIO
C_7/GPIO
C_8/GPIO
C_9/GPIO
DGND
DVDD
Y_0
Y_1
Y_2
Y_3
Y_4
IOGND
IOVDD
Y_5
Y_6
Y_7
Y_8
Y_9
DGND
DVDD
NC
NC
VI_4_A
A18GND
A18VDD
AGND
DGND
SCL
SDA
INTREQ
DVDD
DGND
PWDN
RESETB
GPIO
AVID/GPIO
GLCO/I2CA
IOVDD
IOGND
DATACLK
VI_1_B
VI_1_C
CH1_A33GND
CH1_A33VDD
CH2_A33VDD
CH2_A33GND
VI_2_A
VI_2_B
VI_2_C
CH2_A18GND
CH2_A18VDD
A18VDD_REF
A18GND_REF
NC
NC
VI_3_A
VI_3_B
VI_3_C
NC
NC
Figure 1−2. Terminal Assignments Diagram
SLES140A—March 2007
TVP5147M1PFP
5
Introduction
1.7
Terminal Functions
Table 1−1. Terminal Functions
TERMINAL
NAME
NUMBER
I/O
DESCRIPTION
Analog Video
VI_1_A
VI_1_B
VI_1_C
VI_2_A
VI_2_B
VI_2_C
VI_3_A
VI_3_B
VI_3_C
VI_4_A
80
1
2
7
8
9
16
17
18
23
I/O
I
I
I
I
I
I
I
I
I
VI_1_A: Analog video input for CVBS/Pb/C or analog video output (see Section 2.11.59)
VI_1_x: Analog video input for CVBS/Pb/C
VI_2_x: Analog video input for CVBS/Y
VI_3_x: Analog video input for CVBS/Pr/C
VI_4_A: Analog video input for CVBS/Y
Up to 10 composite, 4 S-video, and 2 composite or 3 component video inputs (or a combination thereof)
can be supported.
The inputs must be ac-coupled. The recommended coupling capacitor is 0.1 µF.
The possible input configurations are listed in the input select register at I2C subaddress 00h (see
Section 2.11.1).
DATACLK
40
O
Line-locked data output clock
XTAL1
74
I
External clock reference input. It can be connected to an external oscillator with a 1.8-V compatible clock
signal or a 14.31818-MHz crystal oscillator.
XTAL2
75
O
External clock reference output. Not connected if XTAL1 is driven by an external single-ended oscillator.
C_[9:0]/
GPIO[9:0]
57, 58,
59, 60,
63, 64,
65, 66,
69, 70
I/O
Digital video output of CbCr, C[9] is MSB and C[0] is LSB. Also, these terminals can be programmable
general-purpose I/O.
For the 8-bit mode, the two LSBs are ignored. Unused outputs can be left unconnected.
Y[9:0]
43, 44,
45, 46,
47, 50,
51, 52,
53, 54
O
Digital video output of Y/YCbCr, Y[9] is MSB and Y[0] is LSB.
For the 8-bit mode, the two LSBs are ignored. Unused outputs can be left unconnected.
Clock Signals
Digital Video
Miscellaneous Signals
GPIO
35
I/O
Programmable general-purpose I/O
GLCO/I2CA
37
I/O
Genlock control output (GLCO) uses real time control (RTC) format.
During reset, this terminal is an input used to program the I2C address LSB.
30
O
Interrupt request
INTREQ
14, 15,
19, 20,
21, 22
NC
Not connected. These terminals can be connected to power or ground (compatible with TVP5146
terminals), internally floating.
PWDN
33
I
Power down input:
1 = Power down
0 = Normal mode
RESETB
34
I
Reset input, active low (see Section 2.8)
SCL
28
I
SDA
29
I/O
I2C clock input
I2C data bus
Host Interface
6
TVP5147M1PFP
SLES140A—March 2007
Introduction
Table 1−1. Terminal Functions (Continued)
TERMINAL
NAME
NUMBER
I/O
DESCRIPTION
Power Supplies
AGND
26
Analog ground. Connect to analog ground.
A18GND_REF
13
Analog 1.8-V return
A18VDD_REF
12
Analog power for reference 1.8 V
CH1_A18GND
CH2_A18GND
A18GND
79
10
24
Analog 1.8-V return
CH1_A18VDD
CH2_A18VDD
A18VDD
78
11
25
Analog power. Connect to 1.8 V.
CH1_A33GND
CH2_A33GND
3
6
Analog 3.3-V return
CH1_A33VDD
CH2_A33VDD
4
5
Analog power. Connect to 3.3 V.
DGND
27, 32, 42,
56, 68
Digital return
DVDD
31, 41, 55,
67
Digital power. Connect to 1.8 V.
IOGND
39, 49, 62
Digital power return
IOVDD
38, 48, 61
Digital power. Connect to 3.3 V or less for reduced noise.
PLL_A18GND
77
Analog power return
PLL_A18VDD
76
Analog power. Connect to 1.8 V.
Sync Signals
HS/CS/GPIO
72
I/O
Horizontal sync output or digital composite sync output
Programmable general-purpose I/O
VS/VBLK/GPIO
73
I/O
Vertical sync output (for modes with dedicated VSYNC) or VBLK output
Programmable general-purpose I/O
FID/GPIO
71
I/O
Odd/even field indicator output. This terminal needs a pulldown resistor (see Figure 5−1).
Programmable general-purpose I/O
AVID/GPIO
36
I/O
Active video indicator output
Programmable general-purpose I/O
SLES140A—March 2007
TVP5147M1PFP
7
Introduction
8
TVP5147M1PFP
SLES140A—March 2007
Functional Description
2
Functional Description
2.1
Analog Processing and A/D Converters
Figure 2−1 shows a functional diagram of the analog processors and A/D converters, which provide the analog
interface to all video inputs. It accepts up to 10 inputs and performs source selection, video clamping, video
amplification, A/D conversion, and gain and offset adjustments to center the digitized video signal. The
TVP5147M1 supports one analog video output for the selected analog input video.
I/O
VI_1_A
PGA
M
U
X
Analog Front End
CVBS/
Pb/C
VI_1_B
VI_1_C
VI_2_A
CVBS/
Y
VI_2_B
VI_2_C
M
U
X
M
U
X
CH1 A/D
Clamp
PGA
11-Bit
ADC
CH2 A/D
Clamp
PGA
11-Bit
ADC
Line-Locked
Sampling Clock
VI_3_A
CVBS/
Pr/C
VI_3_B
VI_3_C
CVBS/
Y
VI_4_A
M
U
X
Clamp
Clamp
Figure 2−1. Analog Processors and A/D Converters
2.1.1 Video Input Switch Control
The TVP5147M1 decoder has two analog channels that accept up to 10 video inputs. The user can configure
the internal analog video switches via the I2C interface. The 10 analog video inputs can be used for different
input configurations, some of which are:
SLES140A—March 2007
TVP5147M1PFP
9
Functional Description
•
•
•
•
Up to 10 selectable individual composite video inputs
Up to four selectable S-video inputs
Up to three selectable analog YPbPr video inputs and one CVBS input
Up to two selectable analog YPbPr video inputs, two S-video inputs, and two CVBS inputs
The input selection is performed by the input select register at I2C subaddress 00h (see Section 2.11.1).
2.1.2 Analog Input Clamping
An internal clamping circuit restores the ac-coupled video signal to a fixed dc level. The clamping circuit
provides line-by-line restoration of the video sync level to a fixed dc reference voltage. The selection between
bottom and mid clamp is performed automatically by the TVP5147M1 decoder.
2.1.3 Automatic Gain Control
The TVP5147M1 decoder uses two programmable gain amplifiers (PGAs), one per channel. The PGA can
scale a signal with a voltage-input compliance of 0.5-VPP to 2.0-VPP to a full-scale 10-bit A/D output code
range. A 4-bit code sets the coarse gain with individual adjustment per channel. Minimum gain corresponds
to a code 0x0 (2.0-VPP full-scale input, −6-dB gain) while maximum gain corresponds to code 0xF (0.5 VPP
full scale, +6-dB gain). The TVP5147M1 decoder also has 12-bit fine gain controls for each channel and
applies independently to coarse gain controls. For composite video, the input video signal amplitude can vary
significantly from the nominal level of 1 VPP. The TVP5147M1 decoder can adjust its PGA setting
automatically: an automatic gain control (AGC) can be enabled and can adjust the signal amplitude such that
the maximum range of the ADC is reached without clipping. Some nonstandard video signals contain peak
white levels that saturate the ADC. In these cases, the AGC automatically cuts back gain to avoid clipping.
If the AGC is on, then the TVP5147M1 decoder can read the gain currently being used.
The TVP5147M1 AGC comprises the front-end AGC before Y/C separation and the back-end AGC after Y/C
separation. The back-end AGC restores the optimum system gain whenever an amplitude reference such as
the composite peak (which is only relevant before Y/C separation) forces the front-end AGC to set the gain
too low. The front-end and back-end AGC algorithms can use up to four amplitude references: sync height,
color burst amplitude, composite peak, and luma peak.
The specific amplitude references being used by the front-end and back-end AGC algorithms can be
independently controlled using the AGC white peak processing register located at subaddress 74h. The
TVP5147M1 gain increment speed and gain increment delay can be controlled using the AGC increment
speed register located at subaddress 78h and the AGC increment delay register located at subaddress 79h.
2.1.4 Analog Video Output
One of the analog input signals is available at the analog video output terminal, which is shared with input
selected by I2C registers. The signal at this terminal must be buffered by a source follower. The nominal output
voltage is 2 V p-p, thus the signal can be used to drive a 75-Ω line. The magnitude is maintained with an AGC
in 16 steps controlled by the TVP5147M1 decoder. In order to use this function, terminal VI_1_A must be set
as an output terminal. The input mode selection register also selects an active analog output signal.
2.1.5 A/D Converters
All ADCs have a resolution of 10 bits and can operate up to 30 MSPS. All A/D channels receive an identical
clock from the on-chip phase-locked loop (PLL) at a frequency between 24 MHz and 30 MHz. All ADC
reference voltages are generated internally.
10
TVP5147M1PFP
SLES140A—March 2007
Functional Description
2.2
Digital Video Processing
Figure 2−2 is a block diagram of the TVP5147M1 digital video decoder processing. This block receives
digitized video signals from the ADCs and performs composite processing for CVBS and S-video inputs and
YCbCr signal enhancements for CVBS and S-video inputs. It also generates horizontal and vertical syncs and
other output control signals such as genlock for CVBS and S-video inputs. Additionally, it can provide field
identification, horizontal and vertical lock, vertical blanking, and active video window indication signals. The
digital data output can be programmed to two formats: 20-bit 4:2:2 with external syncs or 10-bit 4:2:2 with
embedded/separate syncs. The circuit detects pseudosync pulses, AGC pulses, and color striping in
Macrovision-encoded copy-protected material. Information present in the VBI interval can be retrieved and
either inserted in the ITU-R BT.656 output as ancillary data or stored in internal FIFO and/or registers for
retrieval via the host port interface.
Copy
Protection
Detector
CH1 A/D
VBI Data
Processor
Y[9:0]
Output
Formatter
2×
Decimation
C[9:0]
CVBS/Y
CH2 A/D
Slice VBI Data
Composite
Processor
C/CbCr
2×
Decimation
XTAL1
FID
XTAL2
RESETB
PWDN
DATACLK
YCbCr
VS/VBLK
Timing
Processor
HS/CS
Host
Interface
SCL
SDA
GLCO
AVID
Figure 2−2. Digital Video Processing Block Diagram
2.2.1 2× Decimation Filter
All input signals are typically oversampled by a factor of 2 (27 MHz). The A/D outputs initially pass through
decimation filters that reduce the data rate to 1× the pixel rate. The decimation filter is a half-band filter.
Oversampling and decimation filtering can effectively increase the overall signal-to-noise ratio by 3 dB.
2.2.2 Composite Processor
Figure 2−3 is a block diagram of the TVP5147M1 digital composite video processing circuit. This processing
circuit receives a digitized composite or S-video signal from the ADCs and performs Y/C separation (bypassed
for S-video input), chroma demodulation for PAL/NTSC and SECAM, and YUV signal enhancements.
The 10-bit composite video is multiplied by the subcarrier signals in the quadrature demodulator to generate
color difference signals U and V. The U and V signals are then sent to low-pass filters to achieve the desired
bandwidth. An adaptive 5-line comb filter separates UV from Y based on the unique property of color phase
shifts from line to line. The chroma is remodulated through a quadrature modulator and subtracted from
line-delayed composite video to generate luma. This form of Y/C separation is completely complementary,
thus there is no loss of information. However, in some applications, it is desirable to limit the U/V bandwidth
to avoid crosstalk. In that case, notch filters can be turned on. To accommodate some viewing preferences,
a peaking filter is also available in the luma path. Contrast, brightness, sharpness, hue, and saturation controls
are programmable through the host port.
SLES140A—March 2007
TVP5147M1PFP
11
Functional Description
Peaking
CVBS/Y
Line
Delay
Delay
Y
–
Y
NTSC/PAL
Remodulation
SECAM Luma
Contrast
Brightness
Saturation
Adjust
Notch
Filter
CVBS
SECAM
Color
Demodulation
U
Burst
Accumulator
(V)
V
CVBS/C
NTSC/PAL
Demodulation
Color LPF
↓2
Cr
Notch
Filter
Color LPF
↓2
Burst
Accumulator
(U)
Cb
5-Line
Adaptive
Comb
Filter
Notch
Filter
Delay
Notch
Filter
Delay
U
V
Figure 2−3. Composite and S-Video Processing Block Diagram
2.2.2.1
Color Low-Pass Filter
High filter bandwidth preserves sharp color transitions and produces crisp color boundaries. However, for
nonstandard video sources that have asymmetrical U and V side bands, it is desirable to limit the filter
bandwidth to avoid UV crosstalk. The color low-pass filter bandwidth is programmable to enable one of the
three notch filters. Figure 2−4 and Figure 2−5 represent the frequency responses of the wideband color
low-pass filters.
12
TVP5147M1PFP
SLES140A—March 2007
Functional Description
10
0
0
−10
−10
Amplitude − dB
Amplitude − dB
10
−20
−30
ITU-R BT.601 −3 dB
@ 1.42 MHz
−40
−60
1.5
2.0
2.5
3.0
3.5
Filter 1
−3 dB
@ 1.03 MHz
−40
−60
1.0
Filter 3
−3 dB @ 554 kHz
−30
−50
0.5
Filter 0
−3 dB @ 1.41 MHz
−20
−50
−70
0.0
Filter 2
−3 dB @ 844 kHz
−70
0.0
4.0
0.5
1.0
f − Frequency − MHz
Figure 2−4. Color Low-Pass Filter Frequency
Response
2.2.2.2
1.5
2.0
2.5
3.0
3.5
4.0
f − Frequency − MHz
Figure 2−5. Color Low-Pass Filter With Filter
Characteristics, NTSC/PAL ITU-R BT.601
Sampling
Y/C Separation
Y/C separation can be done using adaptive 5-line (5-H delay) comb filters or a chroma trap filter. The comb
filter can be selectively bypassed in the luma or chroma path. If the comb filter is bypassed in the luma path,
then chroma trap filters are used which are shown in Figure 2−6 and Figure 2−7. The TI patented adaptive
comb filter algorithm reduces artifacts such as hanging dots at color boundaries. It detects and properly
handles false colors in high-frequency luminance images such as a multiburst pattern or circle pattern.
10
10
0
0
−5
−5
−10
Notch 1 Filter
−15
−20
Notch 3 Filter
5
Notch 3 Filter
Amplitude − dB
Amplitude − dB
5
Notch 2 Filter
−25
−10
Notch 1 Filter
−15
−20
Notch 2 Filter
−25
No Notch Filter
−30
−30
−35
No Notch Filter
−35
−40
−40
0
1
2
3
4
5
6
7
f − Frequency − MHz
Figure 2−6. Chroma Trap Filter Frequency
Response, NTSC ITU-R BT.601 Sampling
SLES140A—March 2007
0
1
2
3
4
5
6
7
f − Frequency − MHz
Figure 2−7. Chroma Trap Filter Frequency
Response, PAL ITU-R BT.601 Sampling
TVP5147M1PFP
13
Functional Description
2.2.3 Luminance Processing
The digitized composite video signal passes through either a luminance comb filter or a chroma trap filter,
either of which removes chrominance information from the composite signal to generate a luminance signal.
The luminance signal is then fed into the input of a peaking circuit. Figure 2−8 illustrates the basic functions
of the luminance data path. In the case of S-video, the luminance signal bypasses the comb filter or chroma
trap filter and is fed directly to the circuit. A peaking filter (edge enhancer) amplifies high-frequency
components of the luminance signal. Figure 2−9 shows the characteristics of the peaking filter at four different
gain settings that are user-programmable via the I2C interface.
Gain
IN
Peak
Detector
Bandpass
Filter
Peaking
Filter
×
Delay
+
OUT
Figure 2−8. Luminance Edge-Enhancer Peaking Block Diagram
7
Peak at
f = 2.64 MHz
6
Gain = 2
Amplitude − dB
5
Gain = 1
4
3
Gain = 0.5
2
1
0
Gain = 0
−1
0
1
2
3
4
5
6
7
f − Frequency − MHz
Figure 2−9. Peaking Filter Response,
NTSC/PAL ITU-R BT.601 Sampling
2.2.4 Color Transient Improvement
Color transient improvement (CTI) enhances horizontal color transients. The color difference signal transition
points are maintained, but the edges are enhanced for signals which have bandwidth-limited color
components.
14
TVP5147M1PFP
SLES140A—March 2007
Functional Description
2.3
Clock Circuits
An internal line-locked PLL generates the system and pixel clocks. A 14.318-MHz clock is required to drive
the PLL. This can be input to the TVP5147M1 decoder at the 1.8-V level on terminal 74 (XTAL1), or a crystal
of 14.318-MHz fundamental resonant frequency can be connected across terminals 74 and 75 (XTAL2). If a
parallel resonant circuit is used as shown in Figure 2−10, then the external capacitors must have the following
relationship:
CL1 = CL2 = 2CL − CSTRAY,
where CSTRAY is the terminal capacitance with respect to ground. Figure 2−10 shows the reference clock
configurations. The TVP5147M1 decoder generates the DATACLK signal used for clocking data.
TVP5147M1
TVP5147M1
XTAL1
XTAL2
74
14.318-MHz
Clock
XTAL1
75
XTAL2
74
14.318-MHz
Crystal
75
CL1
CL2
Figure 2−10. Reference Clock Configurations
2.4
Real-Time Control (RTC)
Although the TVP5147M1 decoder is a line-locked system, the color burst information is used to determine
accurately the color subcarrier frequency and phase. This ensures proper operation with nonstandard video
signals that do not follow exactly the required frequency multiple between color subcarrier frequency and video
line frequency. The frequency control word of the internal color subcarrier PLL and the subcarrier reset bit are
transmitted via terminal 37 (GLCO) for optional use in an end system (for example, by a video encoder). The
frequency control word is a 23-bit binary number. The instantaneous frequency of the color subcarrier can be
calculated using the following equation:
F PLL +
F ctrl
2 23
F sclk
where FPLL is the frequency of the subcarrier PLL, Fctrl is the 23-bit PLL frequency control word, and Fsclk is
two times the pixel frequency. This information can be generated on the GLCO terminal. Figure 2−11 shows
the detailed timing diagram.
Valid
Sample
Invalid
Sample
Reserved
RTC
128 CLK
18 CLK
M
S
B
L
S
B
22
0
S
45 CLK
23-Bit Fsc PLL Increment
R
3 CLK
1 CLK
Start
Bit
NOTE: RTC reset bit (R) is active-low, Sequence bit (S) PAL: 1 = (R-Y) line normal, 0 = (R-Y) line inverted, NTSC: 1 = no change
Figure 2−11. RTC Timing
2.5
Output Formatter
The output formatter sets how the data is formatted for output on the TVP5147M1 output buses. Table 2−1
shows the available output modes.
SLES140A—March 2007
TVP5147M1PFP
15
Functional Description
Table 2−1. Output Format
TERMINAL
NAME
TERMINAL
NUMBER
10-Bit 4:2:2
YCbCr
20-Bit 4:2:2
YCbCr
Y_9
43
Cb9, Y9, Cr9
Y9
Y_8
44
Cb8, Y8, Cr8
Y8
Y_7
45
Cb7, Y7, Cr7
Y7
Y_6
46
Cb6, Y6, Cr6
Y6
Y_5
47
Cb5, Y5, Cr5
Y5
Y_4
50
Cb4, Y4, Cr4
Y4
Y_3
51
Cb3, Y3, Cr3
Y3
Y_2
52
Cb2, Y2, Cr2
Y2
Y_1
53
Cb1, Y1, Cr1
Y1
Y_0
54
Cb0, Y0, Cr0
Y0
C_9
57
Cb9, Cr9
C_8
58
Cb8, Cr8
C_7
59
Cb7, Cr7
C_6
60
Cb6, Cr6
C_5
63
Cb5, Cr5
C_4
64
Cb4, Cr4
C_3
65
Cb3, Cr3
C_2
66
Cb2, Cr2
C_1
69
Cb1, Cr1
C_0
70
Cb0, Cr0
Table 2−2. Summary of Line Frequencies, Data Rates, and Pixel/Line Counts
PIXELS PER
LINE
ACTIVE PIXELS
PER LINE
LINES PER
FRAME
PIXEL
FREQUENCY
(MHz)
COLOR
SUBCARRIER
FREQUENCY (MHz)
HORIZONTAL
LINE RATE (kHz)
NTSC-J, M
858
720
525
13.5
3.579545
15.73426
NTSC-4.43
858
720
525
13.5
4.43361875
15.73426
PAL-M
858
720
525
13.5
3.57561149
15.73426
PAL-60
858
720
525
13.5
4.43361875
15.73426
PAL-B, D, G, H, I
864
720
625
13.5
4.43361875
15.625
PAL-N
864
720
625
13.5
4.43361875
15.625
PAL-Nc
864
720
625
13.5
3.58205625
15.625
13.5
Dr = 4.406250
Db = 4.250000
15.625
STANDARDS
601 sampling
SECAM
864
720
625
2.5.1 Separate Syncs
VS, HS, and VBLK are independently software programmable to a 1× pixel count. This allows any possible
alignment to the internal pixel count and line count. The default settings for 525-line and 625-line video outputs
are given as examples below. FID changes at the same transient time when the trailing edge of vertical sync
occurs. The polarity of FID is programmable by an I2C interface.
16
TVP5147M1PFP
SLES140A—March 2007
Functional Description
525-Line
525
1
2
3
4
5
6
7
8
9
10
20
21
First Field Video
HS
VS
VS Start
VS Stop
CS
FID
VBLK
VBLK Start
262
263
VBLK Stop
264
265
266
267
268
269
270
271
272
273
283
284
Second Field Video
HS
VS
VS Start
VS Stop
CS
FID
VBLK
VBLK Start
NOTE: Line numbering conforms to ITU-R BT.470
VBLK Stop
Figure 2−12. Vertical Synchronization Signals for 525-Line System
SLES140A—March 2007
TVP5147M1PFP
17
Functional Description
625-Line
622
623
624
625
1
2
3
4
5
6
7
23
24
25
First Field Video
HS
VS
VS Start
VS Stop
CS
FID
VBLK
VBLK Start
310
311
VBLK Stop
312
313
314
315
316
317
318
319
320
336
337
338
Second Field Video
HS
VS
VS Start
VS Stop
CS
FID
VBLK
VBLK Start
NOTE: Line numbering conforms to ITU-R BT.470
VBLK Stop
Figure 2−13. Vertical Synchronization Signals for 625-Line System
18
TVP5147M1PFP
SLES140A—March 2007
Functional Description
0
DATACLK
Y[9:0]
Cb
Y
Cr
Y
EAV EAV EAV EAV
2
1
3
4
Horizontal Blanking
HS Start
SAV SAV SAV SAV
Cb0
1
2
3
4
Y0
Cr0
Y1
HS Stop
HS
A
C
B
D
AVID
AVID Stop
AVID Start
DATACLK = 2× Pixel Clock
Mode
A
B
C
D
NTSC 601
106
128
42
276
PAL 601
112
128
48
288
NOTE: ITU-R BT.656 10-bit 4:2:2 timing with 2× pixel clock reference
Figure 2−14. Horizontal Synchronization Signals for 10-Bit 4:2:2 Mode
SLES140A—March 2007
TVP5147M1PFP
19
Functional Description
0
DATACLK
Y[9:0]
CbCr[9:0]
Y
Y
Y
Y
Horizontal Blanking
Cb
Cr
Cb
Cr
Horizontal Blanking
HS Start
Y0
Y1
Y2
Y3
Cb0 Cr0 Cb1 Cr1
HS Stop
HS
A
C
B
2
D
AVID
AVID Stop
AVID Start
NOTE: AVID rising edge occurs 4 clock cycles early.
DATACLK = 1× Pixel Clock
Mode
A
B
C
D
NTSC 601
53
64
19
136
PAL 601
56
64
22
142
NOTE: 20-bit 4:2:2 timing with 1× pixel clock reference
Figure 2−15. Horizontal Synchronization Signals for 20-Bit 4:2:2 Mode
20
TVP5147M1PFP
SLES140A—March 2007
Functional Description
HS
First Field
B/2
B/2
VS
HS
H/2 + B/2
Second Field
H/2 + B/2
VS
10-Bit (PCLK = 2× Pixel Clock)
20-Bit (PCLK = 1× Pixel Clock)
Mode
B/2
H/2
B/2
H/2
NTSC 601
64
858
32
429
PAL 601
64
864
32
432
Figure 2−16. VSYNC Position With Respect to HSYNC
2.5.2 Embedded Syncs
Standards with embedded syncs insert the SAV and EAV codes into the data stream on the rising and falling
edges of AVID. These codes contain the V and F bits which also define vertical timing. Table 2−3 gives the
format of the SAV and EAV codes.
H equals 1 always indicates EAV. H equals 0 always indicates SAV. The alignment of V and F to the line and
field counter varies depending on the standard.
The P bits are protection bits:
P3 = V xor H; P2 = F xor H; P1 = F xor V; P0 = F xor V xor H
Table 2−3. EAV and SAV Sequence
D9 (MSB)
D8
D7
D6
D5
D4
D3
D2
D1
D0
Preamble
1
1
1
1
1
1
1
1
1
1
Preamble
0
0
0
0
0
0
0
0
0
0
Preamble
0
0
0
0
0
0
0
0
0
0
Status word
1
F
V
H
P3
P2
P1
P0
0
0
2.6
I2C Host Interface
Communication with the TVP5147M1 decoder is via an I2C host interface. The I2C standard consists of two
signals, the serial input/output data (SDA) line and the serial input clock line (SCL), which carry information
between the devices connected to the bus. A third signal (I2CA) is used for slave address selection. Although
an I2C system can be multimastered, the TVP5147M1 decoder functions as a slave device only.
Because SDA and SCL are kept open-drain at a logic-high output level or when the bus is not driven, the user
must connect SDA and SCL to a positive supply voltage via a pullup resistor on the board. The slave addresses
select signal, terminal 37 (I2CA), enables the use of two TVP5147M1 devices tied to the same I2C bus,
because it controls the least significant bit of the I2C device address.
SLES140A—March 2007
TVP5147M1PFP
21
Functional Description
Table 2−4. I2C Host Interface Terminal Description
SIGNAL
TYPE
I2CA
DESCRIPTION
I
Slave address selection
SCL
I
Input clock line
SDA
I/O
Input/output data line
2.6.1 Reset and I 2C Bus Address Selection
The TVP5147M1 decoder can respond to two possible chip addresses. The address selection is made at reset
by an externally supplied level on the I2CA terminal. The TVP5147M1 decoder samples the level of terminal
37 at power up or at the trailing edge of RESETB and configures the I2C bus address bit A0. The I2CA terminal
has an internal pulldown resistor to pull the terminal low to set a zero.
Table 2−5. I2C Address Selection
A6
A5
A4
A3
A2
A1
A0 (I2CA)
R/W
HEX
1
0
1
1
1
0
0 (default)
1†
1/0
B9/B8
1/0
BB/BA
1
0
1
1
1
0
† If terminal 37 is strapped to DVDD via a 2.2-kΩ resistor, I2C device address A0 is set to 1.
2.6.2 I 2C Operation
Data transfers occur using the following illustrated formats.
S
10111000
ACK
Subaddress
ACK
Send data
ACK
P
Read from I2C control registers
S
10111000
ACK
Subaddress
ACK
S
10111001
ACK
Receive data
NAK
P
S = I2C bus start condition
P = I2C bus stop condition
ACK = Acknowledge generated by the slave
NAK = Acknowledge generated by the master, for multiple-byte read master with ACK each byte except
last byte
Subaddress = Subaddress byte
Data = Data byte. If more than one byte of data is transmitted (read and write), the subaddress pointer is
automatically incremented.
I2C bus address = Example shown that I2CA is in default mode. Write (B8h), read (B9h)
2.6.3 VBUS Access
The TVP5147M1 decoder has additional internal registers accessible through an indirect access to an internal
24-bit address wide VBUS. Figure 2−17 shows the VBUS register access.
22
TVP5147M1PFP
SLES140A—March 2007
Functional Description
I2C Registers
VBUS Registers
00h
HOST
Processor
00 0000h
I2C
CC
80 051Ch
WSS
80 0520h
VITC
E0h
VBUS
Data
E1h
E8h
Line
Mode
VBUS[23:0]
VPS
VBUS
Address
EAh
FIFO
FFh
80 052Ch
80 0600h
80 0700h
90 1904h
FF FFFFh
VBUS Write
Single Byte
S
B8
ACK
E8
ACK
VA0
ACK
VA1
ACK
S
B8
ACK
E0
ACK
Send Data
ACK P
VA2
ACK P
ACK P
Multiple Bytes
S
B8
ACK
E8
ACK
VA0
ACK
VA1
ACK
VA2
S
B8
ACK
E1
ACK
Send Data
ACK
•••
Send Data
VA0
VA1
ACK
VA2
ACK P
VBUS Read
Single Byte
S
B8
ACK
E8
ACK
S
B8
ACK
E0
ACK S
ACK
B9
ACK
Read Data
ACK P
NAK P
Multiple Bytes
S
B8
ACK
E8
ACK
VA0
S
B8
ACK
E1
ACK S
ACK
B9
VA1
ACK
ACK
VA2
Read Data
ACK P
ACK
•••
Read Data
NAK P
NOTE: Examples use default I2C address
ACK = Acknowledge generated by the slave
NAK = No acknowledge generated by the master
Figure 2−17. VBUS Access
SLES140A—March 2007
TVP5147M1PFP
23
Functional Description
2.7
VBI Data Processor
The TVP5147M1 VBI data processor (VDP) slices various data services like teletext (WST, NABTS), closed
caption (CC), wide screen signaling (WSS), program delivery control (PDC), vertical interval time code (VITC),
video program system (VPS), copy generation management system (CGMS) data, and electronic program
guide (Gemstar) 1x/2x. Table 2−6 shows the supported VBI system.
These services are acquired by programming the VDP to enable the reception of one or more vertical blank
interval (VBI) data standard(s) during the VBI. The VDP can be programmed on a line-per-line basis to enable
simultaneous reception of different VBI formats, one per line. The results are stored in a FIFO and/or registers.
Because of the high data bandwidth, teletext results are stored in FIFO only. The TVP5147M1 decoder
provides fully decoded V-Chip data to the dedicated registers at subaddresses 80 0540h−80 0543h.
Table 2−6. Supported VBI System
VBI SYSTEM
Teletext WST A
Teletext WST B
STANDARD
LINE NUMBER
NUMBER OF BYTES
SECAM
6−23 (Fields 1 and 2)
38
PAL
6−22 (Fields 1 and 2)
43
Teletext NABTS C
NTSC
10−21 (Fields 1 and 2)
34
Teletext NABTS D
NTSC-J
10−21 (Fields 1 and 2)
35
Closed Caption
PAL
22 (Fields 1 and 2)
2
Closed Caption
NTSC
21 (Fields 1 and 2)
2
PAL
23 (Fields 1 and 2)
14 bits
NTSC
20 (Fields 1 and 2)
20 bits
9
WSS
WSS-CGMS
VITC
PAL
6−22
VITC
NTSC
10−20
9
PAL
16
13
V-Chip (decoded)
NTSC
21 (Fields 1 and 2)
2
Gemstar 1x
NTSC
Gemstar 2x
NTSC
VPS (PDC)
User
24
Any
TVP5147M1PFP
2
5 with frame byte
Programmable
Programmable
SLES140A—March 2007
Functional Description
2.7.1 VBI FIFO and Ancillary Data in Video Stream
Sliced VBI data can be output as ancillary data in the video stream in ITU-R BT.656 mode. VBI data is output
on the Y[9:2] terminals during the horizontal blanking period. Table 2−7 shows the header format and
sequence of the ancillary data inserted into the video stream. This format is also used to store any VBI data
into the FIFO. The size of the FIFO is 512 bytes. Therefore, the FIFO can store up to 11 lines of teletext data
with the NTSC NABTS standard.
Table 2−7. Ancillary Data Format and Sequence
BYTE
NO.
D7
(MSB)
D6
D5
D4
D3
D2
D1
D0
(LSB)
0
0
0
0
0
0
0
0
0
1
1
1
1
1
1
1
1
1
2
1
1
1
1
1
1
1
1
3
NEP
EP
0
1
0
DID2
DID1
DID0
4
NEP
EP
F5
F4
F3
F2
F1
F0
Secondary data ID (SDID)
5
NEP
EP
N5
N4
N3
N2
N1
N0
Number of 32-bit data (NN)
0
0
0
6
7
Video line # [7:0]
Data
error
Match
#1
DESCRIPTION
Ancillary data preamble
Data ID (DID)
Internal data ID0 (IDID0)
Match
#2
Video line # [9:8]
Internal data ID1 (IDID1)
8
1. Data
Data byte
9
2. Data
Data byte
10
3. Data
Data byte
11
4. Data
Data byte
:
4N+7
:
0
0
0
0
1st word
:
:
m. Data
Data byte
Nth word
CS[7:0]
Check sum
0
0
0
0
Fill byte
NOTE: The number of bytes (m) varies depending on the VBI data service.
EP:
Even parity for D0−D5, NEP: Negated even parity
DID:
91h: Sliced data of VBI lines of first field
53h: Sliced data of line 24 to end of first field
55h: Sliced data of VBI lines of second field
97h: Sliced data of line 24 to end of second field
SDID:
This field holds the data format taken from the line mode register bits [2:0] of the corresponding line.
NN:
Number of Dwords beginning with byte 8 through 4N+7. Note this value is the number of Dwords
where each Dword is 4 bytes.
IDID0:
Transaction video line number [7:0]
IDID1:
Bit 0/1 = Transaction video line number [9:8]
Bit 2 = Match 2 flag
Bit 3 = Match 1 flag
Bit 4 = 1 if an error was detected in the EDC block. 0 if no error was detected.
CS:
Sum of D0−D7 of first data through last data byte.
Fill byte:
Fill bytes make a multiple of 4 bytes from byte 0 to last fill byte. For teletext modes, byte 8 is the sync
pattern byte. Byte 9 is the first data byte.
SLES140A—March 2007
TVP5147M1PFP
25
Functional Description
2.7.2 VBI Raw Data Output
The TVP5147M1 decoder can output raw A/D video data at twice the sampling rate for external VBI slicing.
This is transmitted as an ancillary data block, although somewhat differently from the way the sliced VBI data
is transmitted in the FIFO format as described in Section 2.7.1. The samples are transmitted during the active
portion of the line. VBI raw data uses ITU-R BT.656 format having only luma data. The chroma samples are
replaced by luma samples. The TVP5147M1 decoder inserts a four-byte preamble 000h 3FFh 3FFh 180h
before data start. There are no checksum bytes and fill bytes in this mode.
Table 2−8. VBI Raw Data Output Format
BYTE
NO.
D9
(MSB)
D8
D7
D6
D5
D4
D3
D2
D1
D0
(LSB)
0
0
0
0
0
0
0
0
0
0
0
1
1
1
1
1
1
1
1
1
1
1
2
1
1
1
1
1
1
1
1
1
1
3
0
1
1
0
0
0
0
0
0
0
4
1. Data
5
2. Data
:
:
n−1
n−5. Data
n
n–4. Data
2.8
DESCRIPTION
VBI raw data preamble
2× pixel rate luma data
2
(i.e., NTSC 601: n = 1707)
Reset and Initialization
Reset is initiated at power up or any time terminal 34 (RESETB) is brought low. Table 2−9 describes the status
of the TVP5147M1 terminals during and immediately after reset.
Table 2−9. Reset Sequence
SIGNAL NAME
DURING RESET
RESET COMPLETED
Y[9:0], C[9:0]
Input
High-impedance
RESETB, PWDN, SDA, SCL, FSS,
AVID, GLCO, HS, VS, FID
Input
Input
INTREQ
Input
Output
DATACLK
Output
High-impedance
POWER
(3.3 V and 1.8 V)
1 ms (min)
200 ns (min)
Normal Operation
RESETB
(Pin 34)
Reset
1 ms (min)
SDA
(Pin 29)
Invalid I2C Cycle
Valid
Figure 2−18. Reset Timing
The following register writes must be made before normal operation of the device.
STEP
26
TVP5147M1PFP
I2C SUBADDRESS
I2C DATA
1
0x03
0x01
2
0x03
0x00
SLES140A—March 2007
Functional Description
2.9
Adjusting External Syncs
The proper sequence to program the following external syncs is:
•
To set NTSC, PAL-M, NTSC 443, PAL60 (525-line modes):
− Set the video standard to NTSC (register 02h)
− Set HSYNC, VSYNC, VBLK, and AVID external syncs (registers 16h through 24h)
•
To set PAL, PAL-N, SECAM (625-line modes):
− Set the video standard to PAL (register 02h)
− Set HSYNC, VSYNC, VBLK, and AVID external syncs (registers 16h through 24h)
•
For autoswitch, set the video standard to autoswitch (register 02h)
2.10 Internal Control Registers
The TVP5147M1 decoder is initialized and controlled by a set of internal registers that define the operating
parameters of the entire device. Communication between the external controller and the TVP5147M1 is
through a standard I2C host port interface, as described earlier. Table 2−10 shows the summary of these
registers. Detailed programming information for each register is described in the following sections. Additional
registers are accessible through an indirect procedure involving access to an internal 24-bit address wide
VBUS. Table 2−11 shows the summary of the VBUS registers.
NOTE: Do not write to reserved registers. Reserved bits in any defined register must be written
with 0s, unless otherwise noted.
Table 2−10. I2C Register Summary
REGISTER NAME
I2C SUBADDRESS
DEFAULT
R/W
Input select
00h
00h
R/W
AFE gain control
01h
0Fh
R/W
Video standard
02h
00h
R/W
Operation mode
03h
00h
R/W
Autoswitch mask
04h
23h
R/W
Color killer
05h
10h
R/W
Luminance processing control 1
06h
00h
R/W
Luminance processing control 2
07h
00h
R/W
Luminance processing control 3
08h
02h
R/W
Luminance brightness
09h
80h
R/W
Luminance contrast
0Ah
80h
R/W
Chrominance saturation
0Bh
80h
R/W
Chroma hue
0Ch
00h
R/W
Chrominance processing control 1
0Dh
00h
R/W
Chrominance processing control 2
0Eh
0Eh
R/W
Reserved
0Fh−15h
AVID start pixel
16h−17h
055h
R/W
AVID stop pixel
18h−19h
325h
R/W
HSYNC start pixel
1Ah−1Bh
000h
R/W
HSYNC stop pixel
1Ch−1Dh
040h
R/W
VSYNC start line
1Eh−1Fh
004h
R/W
VSYNC stop line
20h−21h
007h
R/W
NOTE: R = Read only
W = Write only
R/W = Read and write
Reserved register addresses must not be written to.
SLES140A—March 2007
TVP5147M1PFP
27
Functional Description
Table 2−10. I2C Register Summary (Continued)
I2C SUBADDRESS
DEFAULT
R/W
VBLK start line
22h−23h
001h
R/W
VBLK stop line
24h−25h
015h
R/W
Reserved
26h−2Ah
00h
R/W
REGISTER NAME
Overlay delay
2Bh
Reserved
2Ch
CTI delay
2Dh
00h
R/W
CTI control
2Eh
00h
R/W
Reserved
2Fh−31h
Sync control
32h
00h
R/W
Output formatter 1
33h
40h
R/W
Output formatter 2
34h
00h
R/W
Output formatter 3
35h
FFh
R/W
Output formatter 4
36h
FFh
R/W
Output formatter 5
37h
FFh
R/W
Output formatter 6
38h
FFh
R/W
Clear lost lock detect
39h
00h
R/W
Status 1
3Ah
R
Status 2
3Bh
R
3Ch−3Dh
R
AGC gain status
Reserved
3Eh
Video standard status
3Fh
R
GPIO input 1
40h
R
GPIO input 2
41h
R
Reserved
42h−45h
AFE coarse gain for CH1
46h
20h
R/W
AFE coarse gain for CH2
47h
20h
R/W
AFE coarse gain for CH3
48h
20h
R/W
AFE coarse gain for CH4
49h
20h
R/W
AFE fine gain for Pb
4Ah−4Bh
900h
R/W
AFE fine gain for chroma
4Ch−4Dh
900h
R/W
AFE fine gain for Pr
4Eh−4Fh
900h
R/W
AFE fine gain for CVBS_Luma
50h−51h
900h
R/W
Reserved
52h−56h
00h
R/W
00h
R/W
08h
R/W
04h
R/W
Field ID control
Reserved
F-bit and V-bit control 1
Reserved
Back-end AGC control
Reserved
57h
58h−68h
69h
6Ah−6Bh
6Ch
6Dh−6Eh
AGC decrement speed control
6Fh
ROM version
70h
Reserved
AGC white peak processing
R
71h−73h
74h
00h
R/W
NOTE: R = Read only
W = Write only
R/W = Read and write
Reserved register addresses must not be written to.
28
TVP5147M1PFP
SLES140A—March 2007
Functional Description
Table 2−10. I2C Register Summary (Continued)
REGISTER NAME
I2C SUBADDRESS
DEFAULT
R/W
F and V bit control
75h
12h
R/W
VCR trick mode control
76h
8Ah
R/W
Horizontal shake increment
77h
64h
R/W
AGC increment speed
78h
05h
R/W
AGC increment delay
79h
1Eh
R/W
Reserved
7Ah−7Eh
Analog output control 1
7Fh
00h
R/W
Chip ID MSB
80h
51h
R
Chip ID LSB
81h
47h
R
Reserved
82h
09h
R/W
00h
R/W
CPLL speed control
Reserved
Status request
83h
84h−96h
97h
Reserved
98h−99h
Vertical line count
9Ah−9Bh
Reserved
9Ch−9Dh
AGC decrement delay
Reserved
9Eh
R
00h
R/W
9Fh−B0h
VDP TTX filter 1 mask 1
B1h
00h
R/W
VDP TTX filter 1 mask 2
B2h
00h
R/W
VDP TTX filter 1 mask 3
B3h
00h
R/W
VDP TTX filter 1 mask 4
B4h
00h
R/W
VDP TTX filter 1 mask 5
B5h
00h
R/W
VDP TTX filter 2 mask 1
B6h
00h
R/W
VDP TTX filter 2 mask 2
B7h
00h
R/W
VDP TTX filter 2 mask 3
B8h
00h
R/W
VDP TTX filter 2 mask 4
B9h
00h
R/W
VDP TTX filter 2 mask 5
BAh
00h
R/W
VDP TTX filter control
BBh
00h
R/W
VDP FIFO word count
BCh
VDP FIFO interrupt threshold
BDh
80h
R/W
Reserved
BEh
VDP FIFO reset
BFh
00h
R/W
VDP FIFO output control
C0h
00h
R/W
VDP line number interrupt
C1h
00h
R/W
VDP pixel alignment
C2h−C3h
01Eh
R/W
Reserved
C4h−D5h
R
VDP line start
D6h
06h
R/W
VDP line stop
D7h
1Bh
R/W
VDP global line mode
D8h
FFh
R/W
VDP full field enable
D9h
00h
R/W
DAh
FFh
R/W
VDP full field mode
Reserved
DBh−DFh
NOTE: R = Read only
W = Write only
R/W = Read and write
Reserved register addresses must not be written to.
SLES140A—March 2007
TVP5147M1PFP
29
Functional Description
Table 2−10. I2C Register Summary (Continued)
I2C SUBADDRESS
DEFAULT
R/W
VBUS data access with no VBUS address increment
E0h
00h
R/W
VBUS data access with VBUS address increment
E1h
00h
R/W
REGISTER NAME
FIFO read data
E2h
Reserved
E3h−E7h
VBUS address access
E8h−EAh
Reserved
EBh−EFh
R
00 0000h
R/W
Interrupt raw status 0
F0h
R
Interrupt raw status 1
F1h
R
Interrupt status 0
F2h
R
Interrupt status 1
F3h
R
Interrupt mask 0
F4h
00h
R/W
Interrupt mask 1
F5h
00h
R/W
Interrupt clear 0
F6h
00h
R/W
Interrupt clear 1
F7h
00h
R/W
Reserved
F8h−FFh
NOTE: R = Read only
W = Write only
R/W = Read and write
Reserved register addresses must not be written to.
Table 2−11. VBUS Register Summary
REGISTER NAME
I2C SUBADDRESS
DEFAULT
R/W
Reserved
00 0000h−80 051Bh
VDP closed caption data
80 051Ch−80 051Fh
R
VDP WSS data
80 0520h−80 0526h
R
Reserved
80 0527h−80 052Bh
VDP VITC data
80 052Ch−80 0534h
Reserved
80 0535h−80 053Fh
VDP V-Chip data
80 0540h−80 0543h
Reserved
80 0544h−80 05FFh
VDP general line mode and line address
80 0600h−80 0611h
Reserved
80 0612h−80 06FFh
VDP VPS (PDC)/Gemstar data
80 0700h−80 070Ch
Reserved
80 070Dh−90 1903h
VDP FIFO read
Reserved
Analog output control 2
Reserved
Interrupt configuration
Reserved
R
R
00h, FFh
R/W
R
90 1904h
R
90 1905h−A0 005Dh
A0 05Eh
B2h
R/W
00h
R/W
A0 005Fh−B0 005Fh
B0 0060h
B0 0061h−FF FFFFh
NOTE: Writing any value to a reserved register may cause erroneous operation of the TVP5147M1 decoder.
It is recommended not to access any data to/from reserved registers.
30
TVP5147M1PFP
SLES140A—March 2007
Functional Description
2.11 Register Definitions
2.11.1
Input Select Register
Subaddress
00h
Default
00h
7
6
5
4
3
2
1
0
Input select [7:0]
Table 2−12. Analog Channel and Video Mode Selection
CVBS
S-video
YPbPr
INPUT SELECT [7:0]
7
6
5
4
3
2
1
0
HEX
OUTPUT
(see Note 1)
VI_1_A (default)
0
0
0
0
0
0
0
0
00
N/A
VI_1_B
0
0
0
0
0
0
0
1
01
VI_1_B
VI_1_C
0
0
0
0
0
0
1
0
02
VI_1_C
VI_2_A
0
0
0
0
0
1
0
0
04
VI_2_A
VI_2_B
0
0
0
0
0
1
0
1
05
VI_2_B
VI_2_C
0
0
0
0
0
1
1
0
06
VI_2_C
VI_3_A
0
0
0
0
1
0
0
0
08
VI_3_A
VI_3_B
0
0
0
0
1
0
0
1
09
VI_3_B
VI_3_C
0
0
0
0
1
0
1
0
0A
VI_3_C
VI_4_A
0
0
0
0
1
1
0
0
0C
VI_4_A
VI_2_A(Y), VI_1_A(C)
0
1
0
0
0
1
0
0
44
N/A
VI_2_B(Y), VI_1_B(C)
0
1
0
0
0
1
0
1
45
VI_2_B(Y)
VI_2_C(Y), VI_1_C(C)
0
1
0
0
0
1
1
0
46
VI_2_C(Y)
VI_2_A(Y), VI_3_A(C)
0
1
0
1
0
1
0
0
54
VI_2_A(Y)
VI_2_B(Y), VI_3_B(C)
0
1
0
1
0
1
0
1
55
VI_2_B(Y)
VI_2_C(Y), VI_3_C(C)
0
1
0
1
0
1
1
0
56
VI_2_C(Y)
VI_4_A(Y), VI_1_A(C)
0
1
0
0
1
1
0
0
4C
N/A
VI_4_A(Y), VI_1_B(C)
0
1
0
0
1
1
0
1
4D
VI_4_A(Y)
VI_4_A(Y), VI_1_C(C)
0
1
0
0
1
1
1
0
4E
VI_4_A(Y)
VI_4_A(Y), VI_3_A(C)
0
1
0
1
1
1
0
0
5C
VI_4_A(Y)
VI_4_A(Y), VI_3_B(C)
0
1
0
1
1
1
0
1
5D
VI_4_A(Y)
VI_4_A(Y), VI_3_C(C)
0
1
0
1
1
1
1
0
5E
VI_4_A(Y)
VI_1_A(Pb), VI_2_A(Y), VI_3_A(Pr)
1
0
0
1
0
1
0
0
94
N/A
VI_1_B(Pb), VI_2_B(Y), VI_3_B(Pr)
1
0
0
1
0
1
0
1
95
VI_2_B(Y)
VI_1_C(Pb), VI_2_C(Y), VI_3_C(Pr)
1
0
0
1
0
1
1
0
96
VI_2_C(Y)
MODE
INPUT(S) SELECTED
NOTE 1: When VI_1_A is set to output, the total number of inputs is nine. The video output can be either CVBS or luma.
Ten input terminals can be configured to support composite, S-video, and component YPbPr as listed in
Table 2−12. User must follow this table properly for S-video and component applications because only the
terminal configurations listed in Table 2−12 are supported.
SLES140A—March 2007
TVP5147M1PFP
31
Functional Description
2.11.2
AFE Gain Control Register
Subaddress
01h
Default
0Fh
7
6
5
4
Reserved
3
2
1
0
1
1
AGC chroma
AGC luma
Bit 3: 1 must be written to this bit.
Bit 2: 1 must be written to this bit.
AGC chroma enable: Controls automatic gain in the chroma/PbPr channel:
0 = Manual (if AGC luma is set to manual, AGC chroma is forced to be in manual)
1 = Enabled auto gain, applied a gain value acquired from the sync channel for S-video and component
mode. When AGC luma is set, this state is valid. (default)
AGC luma enable: Controls automatic gain in the embedded sync channel of CVBS, S-video, component
video:
0 = Manual gain, AFE coarse and fine gain frozen to the previous gain value set by AGC when this bit is set
to 0.
1 = Enabled auto gain applied to only the embedded sync channel (default)
These settings only affect the analog front-end (AFE). The brightness and contrast controls are not affected
by these settings.
2.11.3
Video Standard Register
Subaddress
02h
Default
00h
7
6
5
4
3
2
Reserved
1
0
Video standard [2:0]
Video standard [2:0]:
CVBS and S-Video
Component Video
000
= Autoswitch mode (default)
Autoswitch mode (default)
001
= (M, J) NTSC
Component 525
010
= (B, D, G, H, I, N) PAL
Component 625
011
= (M) PAL
Reserved
100
= (Combination-N) PAL
Reserved
101
= NTSC 4.43
Reserved
110
= SECAM
Reserved
111
= PAL 60
Reserved
With the autoswitch code running, the user can force the decoder to operate in a particular video standard
mode by writing the appropriate value into this register. Changing these bits causes the register settings to
be reinitialized.
32
TVP5147M1PFP
SLES140A—March 2007
Functional Description
2.11.4
Operation Mode Register
Subaddress
03h
Default
00h
7
6
5
4
3
2
1
Reserved
0
Power save
Power save:
0 = Normal operation (default)
1 = Power-save mode. Reduces the clock speed of the internal processor and switches off the ADCs. I2C
interface is active and all current operating settings are preserved.
2.11.5
Autoswitch Mask Register
Subaddress
04h
Default
23h
7
6
5
4
3
2
1
0
Reserved
PAL 60
SECAM
NTSC 4.43
(Nc) PAL
(M) PAL
PAL
(M, J) NTSC
Autoswitch mode mask: Limits the video formats between which autoswitch is possible.
PAL 60:
0 = Autoswitch does not include PAL 60 (default)
1 = Autoswitch includes PAL60
SECAM:
0 = Autoswitch does not include SECAM
1 = Autoswitch includes SECAM (default)
NTSC 4.43:
0 = Autoswitch does not include NTSC 4.43 (default)
1 = Autoswitch includes NTSC 4.43
(Nc) PAL:
0 = Autoswitch does not include (Nc) PAL (default)
1 = Autoswitch includes (Nc) PAL
(M) PAL:
0 = Autoswitch does not include (M) PAL (default)
1 = Autoswitch includes (M) PAL
PAL:
0 = Reserved
1 = Autoswitch includes (B, D, G, H, I, N) PAL (default)
(M, J ) NTSC:
0 = Reserved
1 = Autoswitch includes (M, J) NTSC (default)
NOTE: Bits 1 and 0 must always be 1.
SLES140A—March 2007
TVP5147M1PFP
33
Functional Description
2.11.6
Color Killer Register
Subaddress
05h
Default
10h
7
6
Reserved
5
4
3
2
Automatic color killer
1
0
Color killer threshold [4:0]
Automatic color killer:
00 = Automatic mode (default)
01 = Reserved
10 = Color killer enabled, the UV terminals are forced to a zero color state.
11 = Color killer disabled
Color killer threshold [4:0]:
1 1111 = 31 (maximum)
1 0000 = 16 (default)
0 0000 = 0 (minimum)
2.11.7
Luminance Processing Control 1 Register
Subaddress
06h
Default
00h
7
6
5
4
Reserved
Pedestal not present
Reserved
VBI raw
3
2
1
0
Luminance signal delay [3:0]
Pedestal not present:
0 = 7.5 IRE pedestal is present on the analog video input signal (default)
1 = Pedestal is not present on the analog video input signal
VBI raw:
0 = Disabled (default)
1 = Enabled
During the duration of the vertical blanking as defined by the VBLK start and stop line registers at
subaddresses 22h through 25h (see Sections 2.11.22 and 2.11.23), the chroma samples are replaced by luma
samples. This feature can be used to support VBI processing performed by an external device during the
vertical blanking interval. In order to use this bit, the output format must be 10-bit ITU-R BT.656 mode.
Luminance signal delay [3:0]: Luminance signal delays with respect to the chroma signal in 1× pixel clock
increments.
0111 = Reserved
0110 = 6-pixel delay
0001 = 1-pixel delay
0000 = 0 delay (default)
1111 = −1-pixel delay
1000 = −8-pixel delay
34
TVP5147M1PFP
SLES140A—March 2007
Functional Description
2.11.8
Luminance Processing Control 2 Register
Subaddress
07h
Default
00h
7
6
5
Luma filter select [1:0]
4
3
Reserved
2
1
Peaking gain [1:0]
0
Reserved
Luma filter selected [1:0]:
00 = Luminance adaptive comb enabled (default on CVBS)
01 = Luminance adaptive comb disabled (trap filter selected)
10 = Luma comb/trap filter bypassed (default on S-video, component mode, and SECAM)
11 = Reserved
Peaking gain [1:0]:
00 = 0 (default)
01 = 0.5
10 = 1
11 = 2
2.11.9
Luminance Processing Control 3 Register
Subaddress
08h
Default
02h
7
6
5
4
3
2
Reserved
1
0
Trap filter select [1:0]
Trap filter select [1:0] selects one of the four trap filters to produce the luminance signal by removing the
chrominance signal from the composite video signal. The stop band of the chroma trap filter is centered at the
chroma subcarrier frequency with the stop-band bandwidth controlled by the two control bits.
Trap filter stop-band bandwidth (MHz):
Filter select [1:0]
NTSC ITU-R BT.601
PAL ITU-R BT.601
1.2129
1.2129
00 =
01 =
0.8701
0.8701
10 = (default)
0.7183
0.7383
11 =
0.5010
0.5010
2.11.10 Luminance Brightness Register
Subaddress
09h
Default
80h
7
6
5
4
3
2
1
0
Brightness [7:0]
Brightness [7:0]: This register works for CVBS, S-video, and component video luminance.
1111 1111 = 255 (bright)
1000 0000 = 128 (default)
0000 0000 = 0 (dark)
SLES140A—March 2007
TVP5147M1PFP
35
Functional Description
2.11.11 Luminance Contrast Register
Subaddress
0Ah
Default
80h
7
6
5
4
3
2
1
0
Contrast [7:0]
Contrast [7:0]: This register works for CVBS, S-video, and component video luminance.
1111 1111 = 255 (maximum contrast)
1000 0000 = 128 (default)
0000 0000 = 0 (minimum contrast)
2.11.12 Chrominance Saturation Register
Subaddress
0Bh
Default
80h
7
6
5
4
3
2
1
0
Saturation [7:0]
Saturation [7:0]: This register works for CVBS, S-video, and component video luminance.
1111 1111 = 255 (maximum)
1000 0000 = 128 (default)
0000 0000 = 0 (no color)
2.11.13 Chroma Hue Register
Subaddress
0Ch
Default
00h
7
6
5
4
3
2
1
0
1
0
Hue [7:0]
Hue [7:0] (does not apply to component video)
0111 1111 = +180 degrees
0000 0000 = 0 degrees (default)
1000 0000 = −180 degrees
2.11.14 Chrominance Processing Control 1 Register
Subaddress
0Dh
Default
00h
7
6
5
Reserved
4
3
2
Color PLL reset
Chrominance adaptive
comb enable
Reserved
Automatic color gain control [1:0]
Color PLL reset:
0 = Color subcarrier PLL not reset (default)
1 = Color subcarrier PLL reset
Chrominance adaptive comb enable: This bit is effective on composite video only.
0 = Enabled (default)
1 = Disabled
Automatic color gain control (ACGC) [1:0]:
00= ACGC enabled (default)
01 = Reserved
10= ACGC disabled, ACGC set to the nominal value
11= ACGC frozen to the previous set value
36
TVP5147M1PFP
SLES140A—March 2007
Functional Description
2.11.15 Chrominance Processing Control 2 Register
Subaddress
0Eh
Default
0Eh
7
6
5
4
Reserved
3
2
PAL compensation
WCF
1
0
Chrominance filter select [1:0]
PAL compensation:
0 = Disabled
1 = Enabled (default)
Wideband chroma LPF filter (WCF):
0 = Disabled
1 = Enabled (default)
Chrominance filter select [1:0]:
00 = Disabled
01 = Notch 1
10 = Notch 2 (default)
11 = Notch 3
See Figure 2−6 and Figure 2−7 for characteristics.
2.11.16 AVID Start Pixel Register
Subaddress
16h−17h
Default
055h
Subaddress
7
6
5
4
16h
3
2
1
0
AVID start [7:0]
17h
Reserved
AVID active
Reserved
AVID start [9:8]
AVID active:
0 = AVID out active in VBLK (default)
1 = AVID out inactive in VBLK
AVID start [9:0]: AVID start pixel number, this is an absolute pixel location from HSYNC start pixel 0.
default
NTSC 601
NTSC Sqp
PAL 601
PAL Sqp
85 (55h)
86 (56h)
88 (58h)
103 (67h)
The TVP5147M1 decoder updates the AVID start only when the AVID start MSB byte is written to. If the user
changes these registers, then the TVP5147M1 decoder retains values in different modes until this device
resets. The AVID start pixel register also controls the position of the SAV code.
SLES140A—March 2007
TVP5147M1PFP
37
Functional Description
2.11.17 AVID Stop Pixel Register
Subaddress
18h−19h
Default
325h
Subaddress
7
6
5
4
18h
3
2
1
0
AVID stop [7:0]
19h
Reserved
AVID stop [9:8]
AVID stop [9:0]: AVID stop pixel number. The number of pixels of active video must be an even number. This
is an absolute pixel location from HSYNC start pixel 0.
default
NTSC 601
NTSC Sqp
PAL 601
PAL Sqp
805 (325h)
726 (2D6h)
808 (328h)
696 (2B8h)
The TVP5147M1 decoder updates the AVID stop only when the AVID stop MSB byte is written to. If the user
changes these registers, then the TVP5147M1 decoder retains values in different modes until this device
resets. The AVID start pixel register also controls the position of the EAV code.
2.11.18 HSYNC Start Pixel Register
Subaddress
1Ah−1Bh
Default
000h
Subaddress
7
6
5
4
1Ah
3
2
1
0
HSYNC start [7:0]
1Bh
Reserved
HSYNC start [9:8]
HSYNC start pixel [9:0]: This is an absolute pixel location from HSYNC start pixel 0.
The TVP5147M1 decoder updates the HSYNC start only when the HSYNC start MSB is written to. If the user
changes these registers, then the TVP5147M1 decoder retains values in different modes until this device
resets.
2.11.19 HSYNC Stop Pixel Register
Subaddress
1Ch−1Dh
Default
040h
Subaddress
7
6
5
4
1Ch
3
2
1
0
HSYNC stop [7:0]
1Dh
Reserved
HSYNC stop [9:8]
HSYNC stop [9:0]: This is an absolute pixel location from HSYNC start pixel 0.
The TVP5147M1 decoder updates the HSYNC stop only when the HSYNC stop MSB is written to. If the user
changes these registers, then the TVP5147M1 decoder retains values in different modes until this device
resets.
2.11.20 VSYNC Start Line Register
Subaddress
1Eh−1Fh
Default
004h
Subaddress
7
6
5
4
1Eh
1Fh
3
2
1
0
VSYNC start [7:0]
Reserved
VSYNC start [9:8]
VSYNC start [9:0]: This is an absolute line number. The TVP5147M1 decoder updates the VSYNC start only
when the VSYNC start MSB is written to. If the user changes these registers, then the TVP5147M1 decoder
retains values in different modes until this decoder resets.
NTSC: default 004h
PAL: default 001h
38
TVP5147M1PFP
SLES140A—March 2007
Functional Description
2.11.21 VSYNC Stop Line Register
Subaddress
20h−21h
Default
007h
Subaddress
7
6
5
4
20h
3
2
1
0
VSYNC stop [7:0]
21h
Reserved
VSYNC stop [9:8]
VSYNC stop [9:0]: This is an absolute line number. The TVP5147M1 decoder updates the VSYNC stop only
when the VSYNC stop MSB is written to. If the user changes these registers, the TVP5147M1 decoder retains
values in different modes until this decoder resets.
NTSC: default 007h
PAL: default 004h
2.11.22 VBLK Start Line Register
Subaddress
22h−23h
Default
001h
Subaddress
7
6
5
4
22h
3
2
1
0
VBLK start [7:0]
23h
Reserved
VBLK start [9:8]
VBLK start [9:0]: This is an absolute line number. The TVP5147M1 decoder updates the VBLK start line only
when the VBLK start MSB is written to. If the user changes these registers, the TVP5147M1 decoder retains
values in different modes until this resets (see Section 2.11.16)
NTSC: default 001h
PAL: default 623 (26Fh)
2.11.23 VBLK Stop Line Register
Subaddress
24h−25h
Default
015h
Subaddress
7
6
5
4
24h
3
2
1
0
VBLK stop [7:0]
25h
Reserved
VBLK stop [9:8]
VBLK stop [9:0]: This is an absolute line number. The TVP5147M1 decoder updates the VBLK stop only when
the VBLK stop MSB is written to. If the user changes these registers, then the TVP5147M1 decoder retains
values in different modes until this device resets (see Section 2.11.16).
NTSC: default 21 (015h)
PAL: default 23 (017h)
2.11.24 CTI Delay Register
Subaddress
2Dh
Default
00h
7
6
5
Reserved
4
3
2
1
0
CTI delay [2:0]
CTI delay [2:0]: Sets the delay of the Y channel with respect to Cb/Cr in the CTI block
011 = 3-pixel delay
001 = 1-pixel delay
000 = 0 delay (default)
111 = −1-pixel delay
100 = −4-pixel delay
SLES140A—March 2007
TVP5147M1PFP
39
Functional Description
2.11.25 CTI Control Register
Subaddress
2Eh
Default
00h
7
6
5
4
3
2
CTI coring [3:0]
1
0
CTI gain [3:0]
CTI coring [3:0]: 4-bit CTI coring limit control value, unsigned linear control range from 0 to ±60, step size = 4
1111 = ±60
0001 = ±4
0000 = 0 (default)
CTI gain [3:0]: 4-bit CTI gain control values, unsigned linear control range from 0 to 15/16, step size = 1/16
1111 = 15/16
0001 = 1/16
0000 = 0 disabled (default)
2.11.26 Sync Control Register
Subaddress
32h
Default
00h
7
6
Reserved
5
4
3
2
1
0
Polarity FID
Polarity VS
Polarity HS
VS/VBLK
HS/CS
Polarity FID: determines polarity of FID terminal
0 = First field high, second field low (default)
1 = First field low, second field high
Polarity VS: determines polarity of VS terminal
0 = Active low (default)
1 = Active high
Polarity HS: determines polarity of HS terminal
0 = Active low (default)
1 = Active high
VS or VBLK:
0 = VS terminal outputs vertical sync (default)
1 = VS terminal outputs vertical blank
HS or CS:
0 = HS terminal outputs horizontal sync (default)
1 = HS terminal outputs composite sync
40
TVP5147M1PFP
SLES140A—March 2007
Functional Description
2.11.27 Output Formatter 1 Register
Subaddress
33h
Default
40h
7
6
5
Reserved
YCbCr code range
CbCr code
4
3
2
Reserved
1
0
Output format [2:0]
YCbCr output code range:
0 = ITU-R BT.601 coding range (Y ranges from 64 to 940. Cb and Cr range from 64 to 960.)
1 = Extended coding range (Y, Cb, and Cr range from 4 to 1016.) (default)
CbCr code format:
0 = Offset binary code (2s complement + 512) (default)
1 = Straight binary code (2s complement)
Output format [2:0]:
000 = 10-bit 4:2:2 (pixel x 2 rate) with embedded syncs (ITU-R BT.656) (default)
001 = 20-bit 4:2:2 (pixel rate) with separate syncs
010 = Reserved
011 = 10-bit 4:2:2 with separate syncs
100−111= Reserved
NOTE: 10-bit mode is also used for the raw VBI output mode when bit 4 (VBI raw) in the
luminance processing control 1 register at subaddress 06h is set (see Section 2.11.7).
2.11.28 Output Formatter 2 Register
Subaddress
34h
Default
00h
7
6
Reserved
5
4
Data enable
3
2
Black Screen [1:0]
1
0
CLK polarity
Clock enable
Data enable: Y[9:0] AND C[9:0] output enable
0 = Y[9:0] and C[9:0] high impedance (default)
1 = Y [9:0] and C[9:0] active
Black Screen [1:0]:
00 = Normal operation (default)
01 = Black screen out when TVP5147M1 detects lost lock (using with tuner input but not with VCR)
10 = Black screen out
11 = Black screen out
CLK polarity:
0 = Data clocked out on the falling edge of DATACLK (default)
1 = Data clocked out on the rising edge of DATACLK
Clock enable:
0 = DATACLK outputs are high-impedance (default).
1 = DATACLK outputs are enabled.
SLES140A—March 2007
TVP5147M1PFP
41
Functional Description
2.11.29 Output Formatter 3 Register
Subaddress
35h
Default
FFh
7
6
GPIO [1:0]
5
4
AVID [1:0]
3
2
GLCO [1:0]
1
0
FID [1:0]
GPIO [1:0]: FSS terminal function select
00 = GPIO is logic 0 output.
01 = GPIO is logic 1 output.
10 = Reserved
11 = GPIO is logic input (default).
AVID [1:0]: AVID terminal function select
00 = AVID is logic 0 output.
01 = AVID is logic 1 output.
10 = AVID is active video indicator output.
11 = AVID is logic input (default).
GLCO [1:0]: GLCO terminal function select
00 = GLCO is logic 0 output.
01 = GLCO is logic 1 output.
10 = GCLO is genlock output.
11 = GCLO is logic input (default).
FID [1:0]: FID terminal function select
00 = FID is logic 0 output.
01 = FID is logic 1 output.
10 = FID is FID output.
11 = FID is logic input (default).
42
TVP5147M1PFP
SLES140A—March 2007
Functional Description
2.11.30 Output Formatter 4 Register
Subaddress
36h
Default
FFh
7
6
VS/VBLK [1:0]
5
4
3
HS/CS [1:0]
2
C_1 [1:0]
1
0
C_0 [1:0]
VS/VBLK [1:0]: VS terminal function select
00 = VS/VBLK is logic 0 output.
01 = VS/VBLK is logic 1 output.
10 = VS/VBLK is vertical sync or vertical blank output corresponding to bit 1 (VS/VBLK) in the sync control
register at subaddress 32h (see Section 2.11.26).
11 = VS/VBLK is logic input (default).
HS/CS [1:0]: HS terminal function select
00 = HS/CS is logic 0 output.
01 = HS/CS is logic 1 output.
10 = HS/CS is horizontal sync or composite sync output corresponding to bit 0 (HS/CS) in the sync control
register at subaddress 32h (see Section 2.11.26).
11 = HS/CS is logic input (default).
C_1 [1:0]: C_1 terminal function select
00 = C_1 is logic 0 output.
01 = C_1 is logic 1 output.
10 = Reserved
11 = C_1 is logic input (default).
C_0 [1:0]: C_0 terminal function select
00 = C_0 is logic 0 output.
01 = C_0 is logic 1 output.
10 = Reserved
11 = C_0 is logic input (default).
C_x functions are only available in the 10-bit output mode.
SLES140A—March 2007
TVP5147M1PFP
43
Functional Description
2.11.31 Output Formatter 5 Register
Subaddress
37h
Default
FFh
7
6
C_5 [1:0]
5
4
3
C_4 [1:0]
2
C_3 [1:0]
1
0
C_2 [1:0]
C_5 [1:0]: C_5 terminal function select
00 = C_5 is logic 0 output.
01 = C_5 is logic 1 output.
10 = Reserved
11 = C_5 is logic input (default).
C_4 [1:0]: C_4 terminal function select
00 = C_4 is logic 0 output.
01 = C_4 is logic 1 output.
10 = Reserved
11 = C_4 is logic input (default).
C_3 [1:0]: C_3 terminal function select
00 = C_3 is logic 0 output.
01 = C_3 is logic 1 output.
10 = Reserved
11 = C_3 is logic input (default).
C_2 [1:0]: C_2 terminal function select
00 = C_2 is logic 0 output.
01 = C_2 is logic 1 output.
10 = Reserved
11 = C_2 is logic input (default).
C_x functions are only available in the 10-bit output mode.
44
TVP5147M1PFP
SLES140A—March 2007
Functional Description
2.11.32 Output Formatter 6 Register
Subaddress
38h
Default
FFh
7
6
5
C_9 [1:0]
4
3
C_8 [1:0]
2
1
C_7 [1:0]
0
C_6 [1:0]
C_9 [1:0]: C_9 terminal function select
00 = C_9 is logic 0 output.
01 = C_9 is logic 1 output.
10 = Reserved
11 = C_9 is logic input (default).
C_8 [1:0]: C_8 terminal function select
00 = C_8 is logic 0 output.
01 = C_8 is logic 1 output.
10 = Reserved
11 = C_8 is logic input (default).
C_7 [1:0]: C_7 terminal function select
00 = C_7 is logic 0 output.
01 = C_7 is logic 1 output.
10 = Reserved
11 = C_7 is logic input (default).
C_6 [1:0]: C_6 terminal function select
00 = C_6 is logic 0 output.
01 = C_6 is logic 1 output.
10 = Reserved
11 = C_6 is logic input (default).
C_x functions are only available in the 10-bit output mode.
2.11.33 Clear Lost Lock Detect Register
Subaddress
39h
Default
00h
7
6
5
4
Reserved
3
2
1
0
Clear lost lock detect
Clear lost lock detect: Clear bit 4 (lost lock detect) in the status 1 register at subaddress 3Ah (see Section
2.11.34)
0 = No effect (default)
1 = Clears bit 4 in the status 1 register
SLES140A—March 2007
TVP5147M1PFP
45
Functional Description
2.11.34 Status 1 Register
Subaddress
3Ah
Read only
7
6
5
4
3
2
1
0
Peak white
detect status
Line-alternating
status
Field rate
status
Lost lock
detect
Color subcarrier
lock status
Vertical sync
lock status
Horizontal sync
lock status
TV/VCR
status
Peak white detect status:
0 = Peak white is not detected.
1 = Peak white is detected.
Line-alternating status:
0 = Nonline-alternating
1 = Line-alternating
Field rate status:
0 = 60 Hz
1 = 50 Hz
Lost lock detect:
0 = No lost lock since this bit was cleared.
1 = Lost lock since this bit was cleared.
Color subcarrier lock status:
0 = Color subcarrier is not locked.
1 = Color subcarrier is locked.
Vertical sync lock status:
0 = Vertical sync is not locked.
1 = Vertical sync is locked.
Horizontal sync lock status:
0 = Horizontal sync is not locked.
1 = Horizontal sync is locked.
TV/VCR status:
0 = TV
1 = VCR
46
TVP5147M1PFP
SLES140A—March 2007
Functional Description
2.11.35 Status 2 Register
Subaddress
3Bh
Read only
7
6
5
4
3
Signal present
Weak signal detection
PAL switch polarity
Field sequence status
Color killed
2
1
0
Macrovision detection [2:0]
Signal present detection:
0 = Signal not present
1 = Signal present
Weak signal detection:
0 = No weak signal
1 = Weak signal mode
PAL switch polarity of first line of odd field:
0 = PAL switch is zero.
1 = PAL switch is one.
Field sequence status:
0 = Even field
1 = Odd field
Color killed:
0 = Color killer not active
1 = Color killer activated
Macrovision detection [2:0]:
000 = No copy protection
001 = AGC pulses/pseudo syncs present (type 1)
010 = 2-line color stripe only present
011 = AGC pulses/pseudo syncs and 2-line color stripe present (type 2)
100 = Reserved
101 = Reserved
110 = 4-line color stripe only present
111 = AGC pulses/pseudo syncs and 4-line color stripe present (type 3)
2.11.36 AGC Gain Status Register
Subaddress
3Ch−3Dh
Read only
Subaddress
7
6
5
3Ch
4
3
2
1
0
Fine gain [7:0]
3Dh
Coarse gain [3:0]
Fine gain [11:8]
Fine gain [11:0]: This register provides the fine gain value of sync channel.
1111 1111 1111 = 1.9995
1000 0000 0000 = 1
0010 0000 0000 = 0.5
Coarse gain [3:0]: This register provides the coarse gain value of sync channel.
1111 = 2
0101 = 1
0000 = 0.5
These AGC gain status registers are updated automatically by the TVP5147M1 decoder with AGC on. In
manual gain control mode, these register values are not updated by the TVP5147M1 decoder.
SLES140A—March 2007
TVP5147M1PFP
47
Functional Description
2.11.37 Video Standard Status Register
Subaddress
3Fh
Read only
7
6
5
Autoswitch
4
3
2
Reserved
1
0
Video standard [2:0]
Autoswitch mode:
0 = Stand-alone (forced video standard) mode
1 = Autoswitch mode
Video standard [2:0]:
CVBS and S-video
000 = Reserved
001 = (M, J) NTSC
010 = (B, D, G, H, I, N) PAL
011 = (M) PAL
100 = (Combination-N) PAL
101 = NTSC 4.43
110 = SECAM
111 = PAL 60
Component video
Reserved
Component 525
Component 625
Reserved
Reserved
Reserved
Reserved
Reserved
This register contains information about the detected video standard that the device is currently operating.
When autoswitch code is running, this register must be tested to determine which video standard has been
detected.
2.11.38 GPIO Input 1 Register
Subaddress
40h
Read only
7
6
5
4
3
2
1
0
C_7
C_6
C_5
C_4
C_3
C_2
C_1
C_0
C_x input status:
0 = Input is a low.
1 = Input is a high.
These status bits are only valid when terminals are used as input and its states updated at every line.
48
TVP5147M1PFP
SLES140A—March 2007
Functional Description
2.11.39 GPIO Input 2 Register
Subaddress
41h
Read only
7
6
5
4
3
2
1
0
GPIO
AVID
GLCO
VS
HS
FID
C_9
C_8
GPIO input terminal status:
0 = Input is a low.
1 = Input is a high.
AVID input terminal status:
0 = Input is a low.
1 = Input is a high.
GLCO input terminal status:
0 = Input is a low.
1 = Input is a high.
VS input terminal status:
0 = Input is a low.
1 = Input is a high.
HS input status:
0 = Input is a low.
1 = Input is a high.
FID input status:
0 = Input is a low.
1 = Input is a high.
C_x input status:
0 = Input is a low.
1 = Input is a high.
These status bits are only valid when terminals are used as input and its states updated at every line.
SLES140A—March 2007
TVP5147M1PFP
49
Functional Description
2.11.40 AFE Coarse Gain for CH 1 Register
Subaddress
46h
Default
20h
7
6
5
4
3
2
CGAIN 1 [3:0]
1
0
Reserved
CGAIN 1 [3:0]: Coarse_Gain = 0.5 + (CGAIN 1)/10, where 0 ≤ CGAIN 1 ≤ 15
This register works only in manual gain control mode. When AGC is active, writing to any value is ignored.
1111 = 2
1110 = 1.9
1101 = 1.8
1100 = 1.7
1011 = 1.6
1010 = 1.5
1001 = 1.4
1000 = 1.3
0111 = 1.2
0110 = 1.1
0101 = 1
0100 = 0.9
0011 = 0.8
0010 = 0.7 (default)
0001 = 0.6
0000 = 0.5
2.11.41 AFE Coarse Gain for CH 2 Register
Subaddress
47h
Default
20h
7
6
5
CGAIN 2 [3:0]
4
3
2
1
0
Reserved
CGAIN 2 [3:0]: Coarse_Gain = 0.5 + (CGAIN 2)/10, where 0 ≤ CGAIN 2 ≤ 15
This register works only in manual gain control mode. When AGC is active, writing to any value is ignored.
1111 = 2
1110 = 1.9
1101 = 1.8
1100 = 1.7
1011 = 1.6
1010 = 1.5
1001 = 1.4
1000 = 1.3
0111 = 1.2
0110 = 1.1
0101 = 1
0100 = 0.9
0011 = 0.8
0010 = 0.7 (default)
0001 = 0.6
0000 = 0.5
50
TVP5147M1PFP
SLES140A—March 2007
Functional Description
2.11.42 AFE Coarse Gain for CH 3 Register
Subaddress
48h
Default
20h
7
6
5
4
3
2
CGAIN 3 [3:0]
1
0
Reserved
CGAIN 3 [3:0]: Coarse_Gain = 0.5 + (CGAIN 3)/10, where 0 ≤ CGAIN 3 ≤ 15
This register works only in the manual gain control mode. When AGC is active, writing to any value is ignored.
1111 = 2
1110 = 1.9
1101 = 1.8
1100 = 1.7
1011 = 1.6
1010 = 1.5
1001 = 1.4
1000 = 1.3
0111 = 1.2
0110 = 1.1
0101 = 1
0100 = 0.9
0011 = 0.8
0010 = 0.7 (default)
0001 = 0.6
0000 = 0.5
2.11.43 AFE Coarse Gain for CH 4 Register
Subaddress
49h
Default
20h
7
6
5
CGAIN 4 [3:0]
4
3
2
1
0
Reserved
CGAIN 4 [3:0]: Coarse_Gain = 0.5 + (CGAIN 4)/10, where 0 ≤ CGAIN 4 ≤ 15
This register works only in the manual gain control mode. When AGC is active, writing to any value is ignored.
1111 = 2
1110 = 1.9
1101 = 1.8
1100 = 1.7
1011 = 1.6
1010 = 1.5
1001 = 1.4
1000 = 1.3
0111 = 1.2
0110 = 1.1
0101 = 1
0100 = 0.9
0011 = 0.8
0010 = 0.7 (default)
0001 = 0.6
0000 = 0.5
SLES140A—March 2007
TVP5147M1PFP
51
Functional Description
2.11.44 AFE Fine Gain for Pb Register
Subaddress
4Ah−4Bh
Default
900h
Subaddress
7
6
5
4
4Ah
3
2
1
0
FGAIN 1 [7:0]
4Bh
Reserved
FGAIN 1 [11:8]
FGAIN 1 [11:0]: This fine gain applies to component Pb.
Fine_Gain = (1/2048) * FGAIN 1, where 0 ≤ FGAIN 1 ≤ 4095
This register works only in manual gain control mode. When AGC is active, writing to any value is ignored.
1111 1111 1111 = 1.9995
1100 0000 0000 = 1.5
1001 0000 0000 = 1.125 (default)
1000 0000 0000 = 1
0100 0000 0000 = 0.5
0011 1111 1111 to 0000 0000 0000 = Reserved
2.11.45 AFE Fine Gain for Y_Chroma Register
Subaddress
4Ch−4Dh
Default
900h
Subaddress
7
6
5
4
4Ch
3
2
1
0
FGAIN 2 [7:0]
4Dh
Reserved
FGAIN 2 [11:8]
FGAIN 2 [11:0]: This gain applies to component Y channel or S-video chroma (see AFE fine gain for Pb
register, Section 2.11.44).
This register works only in manual gain control mode. When AGC is active, writing to any value is ignored.
1111 1111 1111 = 1.9995
1100 0000 0000 = 1.5
1001 0000 0000 = 1.125 (default)
1000 0000 0000 = 1
0100 0000 0000 = 0.5
0011 1111 1111 to 0000 0000 0000 = Reserved
2.11.46 AFE Fine Gain for Pr Register
Subaddress
4Eh−4Fh
Default
900h
Subaddress
7
6
5
4Eh
4
3
2
1
0
FGAIN 3 [7:0]
4Fh
Reserved
FGAIN 3 [11:8]
FGAIN 3 [11:0]: This fine gain applies to component Pr (see AFE fine gain for Pb register, Section 2.11.44).
This register works only in manual gain control mode. When AGC is active, writing to any value is ignored.
1111 1111 1111 = 1.9995
1100 0000 0000 = 1.5
1001 0000 0000 = 1.125 (default)
1000 0000 0000 = 1
0100 0000 0000 = 0.5
0011 1111 1111 to 0000 0000 0000 = Reserved
52
TVP5147M1PFP
SLES140A—March 2007
Functional Description
2.11.47 AFE Fine Gain for CVBS_Luma Register
Subaddress
50h−51h
Default
900h
Subaddress
7
6
5
4
50h
3
2
1
0
FGAIN 4 [7:0]
51h
Reserved
FGAIN 4 [11:8]
FGAIN 4 [11:0]: This fine gain applies to CVBS or S-video luma (see AFE fine gain for Pb register,
Section 2.11.44).
This register works only in manual gain control mode. When AGC is active, writing to any value is ignored.
1111 1111 1111 = 1.9995
1100 0000 0000 = 1.5
1001 0000 0000 = 1.125 (default)
1000 0000 0000 = 1
0100 0000 0000 = 0.5
0011 1111 1111 to 0000 0000 0000 = Reserved
2.11.48 Field ID Control Register
Subaddress
57h
Default
00h
7
6
5
4
3
2
1
0
656 version
FID control
656 Version
0 = ITU-R BT.656-4 (default)
1 = ITU-R BT.656-3
FID control
0 = 0→1 adapts to field 1, 1→0 adapts to field 1+ field 2 (default)
1 = 0→1 adapts to field 2, 1→0 adapts to field 1+ field 2 (for TVP5147M1 EVM)
SLES140A—March 2007
TVP5147M1PFP
53
Functional Description
2.11.49 F-bit and V-bit Control 1 Register
Subaddress
69h
Default
00h
7
6
5
Reserved
4
3
2
VPLL
Adaptive
Reserved
1
0
F-bit mode [1:0]
VPLL: VPLL time constant control
0 = VPLL adapts the time constant to the input signal (default)
1 = VPLL time constants are fixed
Adaptive:
0 = Enable F-bit and V-bit adaptation to detected lines per frame (default)
1 = Disable F-bit and V-bit adaptation to detected lines per frame
F-bit mode [1:0]:
00 = Auto mode. If lines per frame is standard decoded F and V bits as per 656 standard from line count
else decode F bit from VSYNC input and set V-bit = 0 (default).
01 = Decode F and V bits from input syncs
10 = Reserved
11 = Always decode F and V bits from line count
This register is used in conjunction with the F-bit and V-bit control 2 register (subaddress 75h) as indicated
below:
Reg 69h
Reg 75h
Standard LPF
Bit 1
Bit 0
Bit 1
Bit 0
0
0
0
0
0
0
0
1
0
0
1
0
0
0
1
0
0
Mode
Nonstandard LPF
F
V
F
V
Reserved
Reserved
Reserved
Reserved
Reserved
TVP5160
656
656
Toggle
Switch9
0
TVP5160
656
656
Pulse
0
1
1
Reserved
Reserved
Reserved
Reserved
Reserved
0
0
Reserved
Reserved
Reserved
Reserved
Reserved
1
0
1
656
656
Toggle
Switch9
1
1
0
656
656
Pulse
0
0
1
1
1
Reserved
Reserved
Reserved
Reserved
Reserved
1
0
0
0
Reserved
Reserved
Reserved
Reserved
Reserved
1
0
0
1
Reserved
Reserved
Reserved
Reserved
Reserved
1
0
1
0
Reserved
Reserved
Reserved
Reserved
Reserved
1
0
1
1
Reserved
Reserved
Reserved
Reserved
Reserved
Switch
Switch
1
1
0
0
TVP5146
656
656
Even = 1
Odd = toggle
1
1
0
1
TVP5146
656
656
Toggle
1
1
1
0
TVP5146
656
656
Pulse
Switch
1
1
1
1
Reserved
Reserved
Reserved
Reserved
Reserved
656 = ITU-R BT.656 standard
Toggle = Toggles from field to field
Pulse = Pulses low for 1 line prior to field transition
Switch = V bit switches high before the F bit transition and low after the F bit transition
Switch9 = V bit switches high 1 line prior to F bit transition, then low after 9 lines
Reserved = Not used
54
TVP5147M1PFP
SLES140A—March 2007
Functional Description
2.11.50 Back-End AGC Control Register
Subaddress
6Ch
Default
08h
7
6
5
4
Reserved
3
2
1
0
1
Peak
Color
Sync
This register disables the back-end AGC when the front-end AGC uses specific amplitude references
(sync-height, color burst, or composite peak) to decrement the front-end gain. For example, writing 0x09 to
this register disables the back-end AGC whenever the front-end AGC uses the sync-height to decrement the
front-end gain.
Peak: Disables back-end AGC when the front-end AGC uses the composite peak as an amplitude reference.
0 = Disabled (default)
1 = Enabled
Color: Disables back-end AGC when the front-end AGC uses color burst as an amplitude reference.
0 = Disabled (default)
1 = Enabled
Sync: Disables back-end AGC when the front-end AGC uses the sync height as an amplitude reference.
0 = Disabled (default)
1 = Enabled
2.11.51 AGC Decrement Speed Control Register
Subaddress
6Fh
Default
04h
7
6
5
4
3
2
Reserved
1
0
AGC decrement speed [2:0]
AGC decrement speed: Adjusts gain decrement speed. Only used for composite/luma peaks.
111 = 7 (slowest)
110 = 6 (default)
L
000 = 0 (fastest)
2.11.52 ROM Version Register
Subaddress
70h
Read only
7
6
5
4
3
2
1
0
ROM version [7:0]
ROM Version [7:0]: ROM revision number
SLES140A—March 2007
TVP5147M1PFP
55
Functional Description
2.11.53 AGC White Peak Processing Register
Subaddress
74h
Default
00h
7
6
5
4
3
2
1
0
Luma peak A
Reserved
Color burst A
Sync height A
Luma peak B
Composite peak
Color burst B
Sync height B
Luma peak A: Use of the luma peak as a video amplitude reference for the back-end feed-forward type AGC
algorithm.
0 = Enabled (default)
1 = Disabled
Color burst A: Use of the color burst amplitude as a video amplitude reference for the back end.
NOTE: Not available for SECAM, component, and B/W video sources.
0 = Enabled (default)
1 = Disabled
Sync height A: Use of the sync height as a video amplitude reference for the back-end feed-forward type AGC
algorithm.
0 = Enabled (default)
1 = Disabled
Luma peak B: Use of the luma peak as a video amplitude reference for the front-end feedback type AGC
algorithm.
0 = Enabled (default)
1 = Disabled
Composite peak: Use of the composite peak as a video amplitude reference for the front-end feedback type
AGC algorithm.
NOTE: Required for CVBS video sources.
0 = Enabled (default)
1 = Disabled
Color burst B: Use of the color burst amplitude as a video amplitude reference for the front-end feedback type
AGC algorithm.
NOTE: Not available for SECAM, component, and B/W video sources.
0 = Enabled (default)
1 = Disabled
Sync height B:
Use of the sync height as a video amplitude reference for the front-end feedback type AGC algorithm.
0 = Enabled (default)
1 = Disabled
NOTE: If all 4 bits of the lower nibble are set to logic 1 (that is, no amplitude reference selected),
then the front-end analog and digital gains are automatically set to nominal values of 2 and
2304, respectively.
If all 4 bits of the upper nibble are set to logic 1 (that is, no amplitude reference selected), then
the back-end gain is set automatically to unity.
If the input sync height is greater than 100% and the AGC-adjusted output video amplitude becomes less than
100%, then the back-end scale factor attempts to increase the contrast in the back end to restore the video
amplitude to 100%.
56
TVP5147M1PFP
SLES140A—March 2007
Functional Description
2.11.54 F and V Bit Control Register
Subaddress
75h
Default
12h
7
6
Rabbit
5
Reserved
4
3
Fast lock
2
F and V [1:0]
1
0
Phase Det.
HPLL
Rabbit: Enable rabbit ear
0 = Disabled (default)
1 = Enabled
Fast lock: Enable fast lock where vertical PLL is reset and a 2-second timer is initialized when vertical lock
is lost; during time-out the detected input VSYNC is output.
0 = Disabled
1 = Enabled (default)
F and V [1:0]
F and V
Lines per frame
F bit
V bit
Standard
ITU−R BT 656
ITU−R BT 656
Nonstandard−even
Forced to 1
Switch at field boundary
Nonstandard−odd
Toggles
Switch at field boundary
Standard
ITU−R BT 656
ITU−R BT 656
Nonstandard
Toggles
Switch at field boundary
Standard
ITU−R BT 656
ITU−R BT 656
Nonstandard
Pulsed mode
Switch at field boundary
00 = (default)
01 =
10 =
11 =
Reserved
Phase detector: Enable integral window phase detector
0 = Disabled
1 = Enabled (default)
HPLL: Enable horizontal PLL to free run
0 = Disabled (default)
1 = Enabled
SLES140A—March 2007
TVP5147M1PFP
57
Functional Description
2.11.55 VCR Trick Mode Control Register
Subaddress
76h
Default
8Ah
7
6
5
4
Switch header
3
2
1
0
Horizontal shake threshold [6:0]
Switch header: When in VCR trick mode, the header noisy area around the head switch is skipped.
0 = Disabled
1 = Enabled (default)
Horizontal shake threshold [6:0]:
000 0000 = Zero threshold
000 1010 = 0Ah (default)
111 1111 = Largest threshold
2.11.56 Horizontal Shake Increment Register
Subaddress
77h
Default
64h
7
6
5
4
3
2
1
0
2
1
0
Horizontal shake increment [7:0]
Horizontal shake increment [7:0]:
000 0000 =0
000 1010 = 64h (default)
111 1111 = FFh
2.11.57 AGC Increment Speed Register
Subaddress
78h
Default
06h
7
6
5
4
3
Reserved
AGC increment speed [3:0]
AGC increment speed: Adjusts gain increment speed.
111 = 7 (slowest)
110 = 6 (default)
L
000 = 0 (fastest)
2.11.58 AGC Increment Delay Register
Subaddress
79h
Default
1Eh
7
6
5
4
3
2
1
0
AGC increment delay [7:0]
AGC increment delay: Number of frames to delay gain increments
1111 1111 = 255
L
0001 1110 = 30 (default)
L
0000 0000 = 0
58
TVP5147M1PFP
SLES140A—March 2007
Functional Description
2.11.59 Analog Output Control 1 Register
Subaddress
7Fh
Default
00h
7
6
5
4
3
Reserved
2
1
0
AGC enable
Input select
Analog Output enable
AGC enable:
0 = Enabled (default)
1 = Disabled, manual gain mode (see Section 2.12.10)
Input select:
00 = Input selected by TVP5147M1 decoder, (see Section 2.11.1) (default)
01 = Input selected manually (see Section 2.12.10)
Analog output enable:
0 = VI_1_A is input (default).
1 = VI_1_A is analog video output.
2.11.60 Chip ID MSB Register
Subaddress
80h
Read only
7
6
5
4
3
2
1
0
1
0
1
0
Chip ID MSB [7:0]
Chip ID MSB [7:0]: This register identifies the MSB of the device ID. Value = 51h
2.11.61 Chip ID LSB Register
Subaddress
81h
Read only
7
6
5
4
3
2
Chip ID LSB [7:0]
Chip ID LSB [7:0]: This register identifies the LSB of the device ID. Value = 47h
2.11.62 CPLL Speed Control Register
Subaddress
83h
Default
09h
7
6
5
Reserved
4
3
2
Speed [3:0]
Speed [3:0]: Color PLL speed control
1001 = Faster (default)
1010 =
1011 = Slower
Other = Reserved
SLES140A—March 2007
TVP5147M1PFP
59
Functional Description
2.11.63 Status Request Register
Subaddress
97h
Default
00h
7
6
5
4
3
2
1
0
Reserved
Capture
Capture:
Setting a 1b in this register causes the internal processor to capture the current settings of the AGC status
and the vertical line count registers. Since this capture is not immediate, it is necessary to check for completion
of the capture by reading the capture bit repeatedly after setting it and waiting for it to be cleared by the internal
processor. Once the capture bit is 0b, the AGC status and vertical line counters (3Ch/3Dh and 9Ah/9Bh) have
been updated and can be safely read in any order.
2.11.64 Vertical Line Count Register
Subaddress
9Ah
9Bh
Read only
Subaddress
7
6
5
4
9Ah
3
2
1
0
Vertical line [7:0]
9Bh
Reserved
Vertical line [9:8]
Vertical line [9:0] represents the detected a total number of lines from the previous frame. This can be used
with nonstandard video signals such as a VCR in trick mode to synchronize downstream video circuitry.
Since this register is a double-byte register, it is necessary to capture the setting into the register to ensure
that the value is not updated between reading the lower and upper bytes. In order to cause this register to
capture the current settings, bit 0 of the status request register (subaddress 97h) must be set to a 1b. Once
the internal processor has updated and can be read. Either byte may be read first since no further update will
occur until bit 0 of 97h is set to 1b again.
2.11.65 AGC Decrement Delay Register
Subaddress
9Eh
Default
00h
7
6
5
4
3
2
1
0
AGC decrement delay [7:0]
AGC decrement delay [7:0]: Number of frames to delay gain decrements
1111 1111 = 255
0001 1110 = 30 (default)
0000 0000 = 0
60
TVP5147M1PFP
SLES140A—March 2007
Functional Description
2.11.66 VDP TTX Filter And Mask Registers
Subaddress
B1h
B2h
B3h
B4h
B5h
B6h
B7h
B8h
B9h
BAh
Default
00h
00h
00h
00h
00h
00h
00h
00h
00h
00h
Subaddress
7
6
5
4
3
2
1
B1h
Filter 1 mask 1
Filter 1 pattern 1
B2h
Filter 1 mask 2
Filter 1 pattern 2
B3h
Filter 1 mask 3
Filter 1 pattern 3
B4h
Filter 1 mask 4
Filter 1 pattern 4
B5h
Filter 1 mask 5
Filter 1 pattern 5
B6h
Filter 2 mask 1
Filter 2 pattern 1
B7h
Filter 2 mask 2
Filter 2 pattern 2
B8h
Filter 2 mask 3
Filter 2 pattern 3
B9h
Filter 2 mask 4
Filter 2 pattern 4
BAh
Filter 2 mask 5
Filter 2 pattern 5
0
For an NABTS system, the packet prefix consists of five bytes. Each byte contains 4 data bits (D[3:0])
interlaced with 4 Hamming protection bits (H[3:0]):
Bit 7
Bit 6
Bit 5
Bit 4
Bit 3
Bit 2
Bit 1
Bit 0
D[3]
H[3]
D[2]
H[2]
D[1]
H[1]
D[0]
H[0]
Only data portion D[3:0] from each byte is applied to a teletext filter function with corresponding pattern bits
P[3:0] and mask bits M[3:0]. The filter ignores the Hamming protection bits.
For WST system (PAL or NTSC), the packet prefix consists of two bytes. The two bytes contain three bits of
magazine number (M[2:0]) and five bits of row address (R[4:0]), interlaced with eight Hamming protection bits
H[7:0]:
Bit 7
Bit 6
Bit 5
Bit 4
Bit 3
Bit 2
Bit 1
Bit 0
R[0]
H[3]
M[2]
H[2]
M[1]
H[1]
M[0]
H[0]
R[4]
H[7]
R[3]
H[6]
R[2]
H[5]
R[1]
H[4]
The mask bits enable filtering using the corresponding bit in the pattern register. For example, a 1 in the LSB
of mask 1 means that the filter module must compare the LSB of nibble 1 in the pattern register to the first data
bit on the transaction. If these match, then a true result is returned. A 0 in a bit of mask means that the filter
module must ignore that data bit of the transaction. If all 0s are programmed in the mask bits, then the filter
matches all patterns returning a true result (default 00h).
SLES140A—March 2007
TVP5147M1PFP
61
Functional Description
2.11.67 VDP TTX Filter Control Register
Subaddress
BBh
Default
00h
7
6
5
Reserved
4
3
Filter logic [1:0]
2
1
0
Mode
TTX filter 2 enable
TTX filter 1 enable
Filter logic [1:0]: Allow different logic to be applied when combining the decision of filter 1 and filter 2 as follows:
00 = NOR (default)
01 = NAND
10 = OR
11 = AND
Mode: indicates which teletext mode is in use.
0 = Teletext filter applies to 2 header bytes (default)
1 = Teletext filter applies to 5 header bytes
TTX filter 2 enable: provides for enabling the teletext filter function within the VDP.
0 = Disabled (default)
1 = Enabled
TTX filter 1 enable: provides for enabling the teletext filter function within the VDP.
0 = Disabled (default)
1 = Enabled
If the filter matches or if the filter mask is all 0s, then a true result is returned.
62
TVP5147M1PFP
SLES140A—March 2007
Functional Description
1P1[3]
D1[3]
1M1[3]
1P1[2]
D1[2]
1M1[2]
1P1[1]
D1[1]
1M1[1]
1P1[0]
D1[0]
1M1[0]
NIBBLE 1
D2[3:0]
NIBBLE 2
1P2[3:0]
1M2[3:0]
PASS 1
D3[3:0]
1P3[3:0]
Filter 1
Enable
NIBBLE 3
00
1M3[3:0]
D4[3:0]
01
NIBBLE 4
1P4[3:0]
PASS
1M4[3:0]
10
D5[3:0]
1P5[3:0]
NIBBLE 5
11
1M5[3:0]
2
Filter Logic
FILTER 1
D1..D5
PASS 2
FILTER 2
2P1..2P5
2M1..2M5
Filter 2
Enable
Figure 2−19. Teletext Filter Function
2.11.68 VDP FIFO Word Count Register
Subaddress
BCh
Read only
7
6
5
4
3
2
1
0
FIFO word count [7:0]
FIFO word count [7:0]: This register provides the number of words in the FIFO.
NOTE: 1 word equals 2 bytes.
SLES140A—March 2007
TVP5147M1PFP
63
Functional Description
2.11.69 VDP FIFO Interrupt Threshold Register
Subaddress
BDh
Default
80h
7
6
5
4
3
2
1
0
Threshold [7:0]
Threshold [7:0]: This register is programmed to trigger an interrupt when the number of words in the FIFO
exceeds this value.
NOTE: 1 word equals 2 bytes.
2.11.70 VDP FIFO Reset Register
Subaddress
BFh
Default
00h
7
6
5
4
3
2
1
0
Reserved
FIFO reset
FIFO reset: Writing any data to this register clears the FIFO and VDP data register (CC, WSS, VITC and VPS).
After clearing, this register is automatically cleared.
2.11.71 VDP FIFO Output Control Register
Subaddress
C0h
Default
00h
7
6
5
4
3
2
1
0
Reserved
Host access enable
Host access enable: This register is programmed to allow the host port access to the FIFO or to allow all VDP
data to go out the video output.
0 = Output FIFO data to the video output Y[9:2] (default)
1 = Allow host port access to the FIFO data
2.11.72 VDP Line Number Interrupt Register
Subaddress
C1h
Default
00h
7
6
Field 1 enable
Field 2 enable
5
4
3
2
1
0
Line number [5:0]
Field 1 interrupt enable:
0 = Disabled (default)
1 = Enabled
Field 2 interrupt enable:
0 = Disabled (default)
1 = Enabled
Line number [5:0]: Interrupt line number (default 00h)
This register is programmed to trigger an interrupt when the video line number exceeds this value in bits [5:0].
This interrupt must be enabled at address F4h.
NOTE: The line number value of 0 or 1 is invalid and does not generate an interrupt.
64
TVP5147M1PFP
SLES140A—March 2007
Functional Description
2.11.73 VDP Pixel Alignment Register
Subaddress
C2h−C3h
Default
01Eh
Subaddress
7
6
5
4
C2h
3
2
1
0
Pixel alignment [7:0]
C3h
Reserved
Pixel alignment [9:8]
Pixel alignment [9:8]: These registers form a 10-bit horizontal pixel position from the falling edge of horizontal
sync, where the VDP controller initiates the program from one line standard to the next line standard, for
example, the previous line of teletext to the next line of closed caption. This value must be set so that the switch
occurs after the previous transaction has cleared the delay in the VDP, but early enough to allow the new
values to be programmed before the current settings are required.
The default value is 0x1E and has been tested with every standard supported here. A new value is needed
only if a custom standard is in use.
2.11.74 VDP Line Start Register
Subaddress
D6h
Default
06h
7
6
5
4
3
2
1
0
VDP line start [7:0]
VDP line start [7:0]: Set the VDP line starting address
This register must be set properly before enabling the line mode registers. The VDP processor works only the
VBI region set by this register and the VDP line stop register.
2.11.75 VDP Line Stop Register
Subaddress
D7h
Default
1Bh
7
6
5
4
3
2
1
0
2
1
0
VDP line stop [7:0]
VDP line stop [7:0]: Set the VDP stop line address
2.11.76 VDP Global Line Mode Register
Subaddress
D8h
Default
FFh
7
6
5
4
3
Global line mode [7:0]
Global line mode [7:0]: VDP processing for multiple lines set by the VDP start line register at subaddress D6h
and the VDP stop line register at subaddress D7h.
Global line mode register has the same bit definition as the general line mode registers.
General line mode has priority over the global line mode.
SLES140A—March 2007
TVP5147M1PFP
65
Functional Description
2.11.77 VDP Full Field Enable Register
Subaddress
D9h
Default
00h
7
6
5
4
3
2
1
0
Reserved
Full field enable
Full field enable:
0 = Disabled full field mode (default)
1 = Enabled full field mode
This register enables the full field mode. In this mode, all lines outside the vertical blank area and all lines in
the line mode register programmed with FFh are sliced with the definition of the VDP full field mode register
at subaddress DAh. Values other than FFh in the line mode registers allow a different slice mode for that
particular line.
2.11.78 VDP Full Field Mode Register
Subaddress
DAh
Default
FFh
7
6
5
4
3
2
1
0
Full field mode [7:0]
Full field mode [7:0]:
This register programs the specific VBI standard for full field mode. It can be any VBI standard. Individual line
settings take priority over the full field register. This allows each VBI line to be programmed independently but
have the remaining lines in full field mode. The full field mode register has the same bit definition as line mode
registers (default FFh).
Global line mode has priority over the full field mode.
2.11.79 VBUS Data Access With No VBUS Address Increment Register
Subaddress
E0h
Default
00h
7
6
5
4
3
2
1
0
1
0
VBUS data [7:0]
VBUS data [7:0]: VBUS data register for VBUS single-byte read/write transaction.
2.11.80 VBUS Data Access With VBUS Address Increment Register
Subaddress
E1h
Default
00h
7
6
5
4
3
2
VBUS data [7:0]
VBUS data [7:0]: VBUS data register for VBUS multibyte read/write transaction. VBUS address is
autoincremented after each data byte read/write.
66
TVP5147M1PFP
SLES140A—March 2007
Functional Description
2.11.81 FIFO Read Data Register
Subaddress
E2h
Read only
7
6
5
4
3
2
1
0
FIFO read data [7:0]
FIFO read data [7:0]: This register is provided to access VBI FIFO data through the I2C interface. All forms
of teletext data come directly from the FIFO, while all other forms of VBI data can be programmed to come
from registers or from the FIFO. If the host port is to be used to read data from the FIFO, then bit 0 (host access
enable) in the VDP FIFO output control register at subaddress C0h must be set to 1 (see Section 2.11.71).
2.11.82 VBUS Address Access Register
Subaddress
E8h
E9h
EAh
Default
00h
00h
00h
Subaddress
7
6
5
4
3
E8h
VBUS address [7:0]
E9h
VBUS address [15:8]
EAh
VBUS address [23:16]
2
1
0
VBUS address [23:0]: VBUS is a 24-bit wide internal bus. The user needs to program in these registers the
24-bit address of the internal register to be accessed via host port indirect access mode.
2.11.83 Interrupt Raw Status 0 Register
Subaddress
F0h
Read only
7
6
5
4
3
2
1
0
FIFO THRS
TTX
WSS
VPS
VITC
CC F2
CC F1
Line
FIFO THRS: FIFO threshold passed, unmasked
0 = Not passed
1 = Passed
TTX: Teletext data available unmasked
0 = Not available
1 = Available
WSS: WSS data available unmasked
0 = Not available
1 = Available
VPS: VPS data available unmasked
0 = Not available
1 = Available
VITC: VITC data available unmasked
0 = Not available
1 = Available
CC F2: CC field 2 data available unmasked
0 = Not available
1 = Available
SLES140A—March 2007
TVP5147M1PFP
67
Functional Description
CC F1: CC field 1 data available unmasked
0 = Not available
1 = Available
Line: Line number interrupt unmasked
0 = Not available
1 = Available
The host interrupt raw status 0 and 1 registers represent the interrupt status without applying mask bits.
2.11.84 Interrupt Raw Status 1 Register
Subaddress
F1h
Read only
7
6
5
4
Reserved
3
2
1
0
H/V lock
Macrovision status changed
Standard changed
FIFO full
H/V lock: unmasked
0 = H/V lock status unchanged
1 = H/V lock status changed
Macrovision status changed: unmasked
0 = Macrovision status unchanged
1 = Macrovision status changed
Standard changed: unmasked
0 = Video standard unchanged
1 = Video standard changed
FIFO full: unmasked
0 = FIFO not full
1 = FIFO was full during write to FIFO
The FIFO full error flag is set when the current line of VBI data cannot enter the FIFO. For example, if the FIFO
has only 10 bytes left and teletext is the current VBI line, then the FIFO full error flag is set, but no data is written
because the entire teletext line does not fit. However, if the next VBI line is closed caption requiring only 2 bytes
of data plus the header, then this goes into the FIFO even if the full error flag is set.
2.11.85 Interrupt Status 0 Register
Subaddress
F2h
Read only
7
6
5
4
3
2
1
0
FIFO THRS
TTX
WSS
VPS
VITC
CC F2
CC F1
Line
FIFO THRS: FIFO threshold passed, masked
0 = Not passed
1 = Passed
TTX: Teletext data available masked
0 = Not available
1 = Available
WSS: WSS data available masked
0 = Not available
1 = Available
68
TVP5147M1PFP
SLES140A—March 2007
Functional Description
VPS: VPS data available masked
0 = Not available
1 = Available
VITC: VITC data available masked
0 = Not available
1 = Available
CC F2: CC field 2 data available masked
0 = Not available
1 = Available
CC F1: CC field 1 data available masked
0 = Not available
1 = Available
Line: Line number interrupt masked
0 = Not available
1 = Available
The interrupt status 0 and 1 registers represent the interrupt status after applying mask bits. Therefore, the
status bits are the result of a logical AND between the raw status and mask bits. The external interrupt terminal
is derived from this register as an OR function of all nonmasked interrupts in this register.
Reading data from the corresponding register does not clear the status flags automatically. These flags are
reset using the corresponding bits in interrupt clear 0 and 1 registers.
2.11.86 Interrupt Status 1 Register
Subaddress
F3h
Read only
7
6
5
4
Reserved
3
2
1
0
H/V lock
Macrovision status changed
Standard changed
FIFO full
H/V lock: H/V lock status changed mask
0 = H/V lock status unchanged
1 = H/V lock status changed
Macrovision status changed: Macrovision status changed masked
0 = Macrovision status not changed
1 = Macrovision status changed
Standard changed: Standard changed masked
0 = Video standard not changed
1 = Video standard changed
FIFO full: full status of FIFO masked
0 = FIFO not full
1 = FIFO was full during write to FIFO, see the interrupt mask 1 register at subaddress F5h for details (see
Section 2.11.88)
SLES140A—March 2007
TVP5147M1PFP
69
Functional Description
2.11.87 Interrupt Mask 0 Register
Subaddress
F4h
Default
00h
7
6
5
4
3
2
1
0
FIFO THRS
TTX
WSS
VPS
VITC
CC F2
CC F1
Line
FIFO THRS: FIFO threshold passed mask
0 = Disabled (default)
1 = Enabled FIFO_THRES interrupt
TTX: Teletext data available mask
0 = Disabled (default)
1 = Enabled TTX available interrupt
WSS: WSS data available mask
0 = Disabled (default)
1 = Enabled WSS available interrupt
VPS: VPS data available mask
0 = Disabled (default)
1 = Enabled VPS available interrupt
VITC: VITC data available mask
0 = Disabled (default)
1 = Enabled VITC available interrupt
CC F2: CC field 2 data available mask
0 = Disabled (default)
1 = Enabled CC_field 2 available interrupt
CC F1: CC field 1 data available mask
0 = Disabled (default)
1 = Enabled CC_field 1 available interrupt
Line: Line number interrupt mask
0 = Disabled (default)
1 = Enabled Line_INT interrupt
The host interrupt mask 0 and 1 registers can be used by the external processor to mask unnecessary interrupt
sources for the interrupt status 0 and 1 register bits, and for the external interrupt terminal. The external
interrupt is generated from all nonmasked interrupt flags.
70
TVP5147M1PFP
SLES140A—March 2007
Functional Description
2.11.88 Interrupt Mask 1 Register
Subaddress
F5h
Default
00h
7
6
5
4
Reserved
3
2
1
0
H/V lock
Macrovision status changed
Standard changed
FIFO full
H/V lock: H/V lock status changed masked
0 = H/V lock status unchanged (default)
1 = H/V lock status changed
Macrovision status changed: Macrovision status changed mask
0 = Macrovision status unchanged
1 = Macrovision status changed
Standard changed: Standard changed mask
0 = Disabled (default)
1 = Enabled video standard changed
FIFO full: FIFO full mask
0 = Disabled (default)
1 = Enabled FIFO full interrupt
2.11.89 Interrupt Clear 0 Register
Subaddress
F6h
Default
00h
7
6
5
4
3
2
1
0
FIFO THRS
TTX
WSS
VPS
VITC
CC F2
CC F1
Line
FIFO THRS: FIFO threshold passed clear
0 = No effect (default)
1 = Clear bit 7 (FIFO_THRS) in the interrupt status 0 register at subaddress F2h
TTX: Teletext data available clear
0 = No effect (default)
1 = Clear bit 6 (TTX available) in the interrupt status 0 register at subaddress F2h
WSS: WSS data available clear
0 = No effect (default)
1 = Clear bit 5 (WSS available) in the interrupt status 0 register at subaddress F2h
VPS: VPS data available clear
0 = No effect (default)
1 = Clear bit 4 (VPS available) in the interrupt status 0 register at subaddress F2h
VITC: VITC data available clear
0 = Disabled (default)
1 = Clear bit 3 (VITC available) in the interrupt status 0 register at subaddress F2h
CC F2: CC field 2 data available clear
0 = Disabled (default)
1 = Clear bit 2 (CC field 2 available) in the interrupt status 0 register at subaddress F2h
CC F1: CC field 1 data available clear
0 = Disabled (default)
1 = Clear bit 1 (CC field 1 available) in the interrupt status 0 register at subaddress F2h
SLES140A—March 2007
TVP5147M1PFP
71
Functional Description
Line: Line number interrupt clear
0 = Disabled (default)
1 = Clear bit 0 (line interrupt available) in the interrupt status 0 register at subaddress F2h
The host interrupt clear 0 and 1 registers are used by the external processor to clear the interrupt status bits
in the host interrupt status 0 and 1 registers. When no nonmasked interrupts remain set in the registers, the
external interrupt terminal also becomes inactive.
2.11.90 Interrupt Clear 1 Register
Subaddress
F7h
Default
00h
7
6
5
4
Reserved
3
2
1
0
H/V lock
Macrovision status changed
Standard changed
FIFO full
H/V lock: Clear H/V lock status changed flag
0 = H/V lock status unchanged
1 = H/V lock status changed
Macrovision status changed: Clear Macrovision status changed flag
0 = No effect (default)
1 = Clear bit 2 (Macrovision status changed) in the interrupt status 1 register at subaddress F3h and the
interrupt raw status 1 register at subaddress F1h
Standard changed: Clear standard changed flag
0 = No effect (default)
1 = Clear bit 1 (video standard changed) in the interrupt status 1 register at subaddress F3h and the
interrupt raw status 1 register at subaddress F1h
FIFO full: Clear FIFO full flag
0 = No effect (default)
1 = Clear bit 0 (FIFO full flag) in the interrupt status 1 register at subaddress F3h and the interrupt raw
status 1 register at subaddress F1h
72
TVP5147M1PFP
SLES140A—March 2007
Functional Description
2.12 VBUS Register Definitions
2.12.1
VDP Closed Caption Data Register
Subaddress
80 051Ch−80 051Fh
Read only
Subaddress
7
6
5
4
3
80 051Ch
Closed caption field 1 byte 1
80 051Dh
Closed caption field 1 byte 2
80 051Eh
Closed caption field 2 byte 1
80 051Fh
Closed caption field 2 byte 2
2
1
0
These registers contain the closed caption data arranged in bytes per field.
2.12.2
VDP WSS Data Register
Subaddress
80 0520h−80 0526h
WSS NTSC (CGMS):
Read only
Subaddress
7
6
80 0520h
80 0521h
b13
b12
80 0522h
5
4
3
2
1
0
Byte
b5
b4
b3
b2
b1
b0
WSS field 1 byte 1
b11
b10
b9
b8
b7
b6
WSS field 1 byte 2
b19
b18
b17
b16
b15
b14
WSS field 1 byte 3
80 0523h
Reserved
80 0524h
80 0525h
b13
b12
80 0526h
b5
b4
b3
b2
b1
b0
WSS field 2 byte 1
b11
b10
b9
b8
b7
b6
WSS field 2 byte 2
b19
b18
b17
b16
b15
b14
WSS field 2 byte 3
These registers contain the wide screen signaling data for NTSC.
Bits 0−1 represent word 0, aspect ratio
Bits 2−5 represent word 1, header code for word 2
Bits 6−13 represent word 2, copy control
Bits 14−19 represent word 3, CRC
PAL/SECAM:
Read only
Subaddress
7
6
5
4
3
2
1
0
Byte
80 0520h
b7
b6
b5
b4
b3
b2
b1
b0
WSS field 1 byte 1
b13
b12
b11
b10
b9
b8
WSS field 1 byte 2
80 0521h
80 0522h
Reserved
80 0523h
Reserved
80 0524h
b7
80 0525h
80 0526h
b6
b5
b4
b3
b2
b1
b0
WSS field 2 byte 1
b13
b12
b11
b10
b9
b8
WSS field 2 byte 2
Reserved
PAL/SECAM:
Bits 0−3 represent group 1, aspect ratio
Bits 4−7 represent group 2, enhanced services
Bits 8−10 represent group 3, subtitles
Bits 11−13 represent group 4, others
SLES140A—March 2007
TVP5147M1PFP
73
Functional Description
2.12.3
VDP VITC Data Register
Subaddress
80 052Ch−80 0534h
Read only
Subaddress
7
6
5
4
3
80 052Ch
VITC frame byte 1
80 052Dh
VITC frame byte 2
80 052Eh
VITC seconds byte 1
80 052Fh
VITC seconds byte 2
80 0530h
VITC minutes byte 1
80 0531h
VITC minutes byte 2
80 0532h
VITC hours byte 1
80 0533h
VITC hours byte 2
80 0534h
VITC CRC byte
2
1
0
These registers contain the VITC data.
2.12.4
Subaddress
VDP V-Chip TV Rating Block 1 Register
80 0540h
Read only
7
6
5
4
3
2
1
0
Reserved
14-D
PG-D
Reserved
MA-L
14-L
PG-L
Reserved
TV parental guidelines rating block 1:
14-D: When incoming video program is TV-14-D rated then this bit is set high
PG-D: When incoming video program is TV-PG-D rated then this bit is set high
MA-L: When incoming video program is TV-MA-L rated then this bit is set high
14-L: When incoming video program is TV-14-L rated then this bit is set high
PG-L: When incoming video program is TV-PG-L rated then this bit is set high
2.12.5
Subaddress
VDP V-Chip TV Rating Block 2 Register
80 0541h
Read only
7
6
5
4
3
2
1
0
MA-S
14-S
PG-S
Reserved
MA-V
14-V
PG-V
Y7-FV
TV parental guidelines rating block 2:
MA-S: When incoming video program is TV-MA-S rated then this bit is set high
14-S: When incoming video program is TV-14-S rated then this bit is set high
PG-S: When incoming video program is TV-PG-S rated then this bit is set high
MA-V: When incoming video program is TV-MA-V rated then this bit is set high
14-V: When incoming video program is TV-14-V rated then this bit is set high
PG-V: When incoming video program is TV-PG-S rated then this bit is set high
Y7-FV: When incoming video program is TV-Y7-FV rated then this bit is set high
74
TVP5147M1PFP
SLES140A—March 2007
Functional Description
2.12.6
Subaddress
VDP V-Chip TV Rating Block 3 Register
80 0542h
Read only
7
6
5
4
3
2
1
0
None
TV-MA
TV-14
TV-PG
TV-G
TV-Y7
TV-Y
None
TV parental guidelines rating block 3:
None: no block intended
TV-MA: When incoming video program is TV-MA rated in TV parental guidelines rating then this bit is set
high
TV-14: When incoming video program is TV-14 rated in TV parental guidelines rating then this bit is set
high
TV-PG: When incoming video program is TV-PG rated in TV parental guidelines rating then this bit is set
high
TV-G: When incoming video program is TV-G rated in TV parental guidelines rating then this bit is set high
TV-Y7: When incoming video program is TV-Y7 rated in TV parental guidelines rating then this bit is set
high
TV-Y: When incoming video program is TV-G rated in TV parental guidelines rating then this bit is set high
None: no block intended
2.12.7
Subaddress
VDP V-CHIP MPAA Rating Data Register
80 0543h
Read only
7
6
5
4
3
2
1
0
Not Rated
X
NC-17
R
PG-13
PG
G
N/A
MPAA rating block (E5h):
Not rated: When incoming video program is not rated in MPAA rating then this bit is set high
X: When incoming video program is X rated in MPAA rating then this bit is set high
NC-17: When incoming video program is NC-17 rated in MPAA rating then this bit is set high
R: When incoming video program is R rated in MPAA rating then this bit is set high
PG-13: When incoming video program is PG-13 rated in MPAA rating then this bit is set high
PG: When incoming video program is PG rated in MPAA rating then this bit is set high
G: When incoming video program is G rated in MPAA rating then this bit is set high
N/A: When incoming video program is N/A rated in MPAA rating then this bit is set high
SLES140A—March 2007
TVP5147M1PFP
75
Functional Description
2.12.8
VDP General Line Mode and Line Address Register
Subaddress
80 0600h−80 0611h
(default line mode = FFh, address = 00h)
Subaddress
7
6
80 0600h
5
4
3
2
1
0
Line address 1
80 0601h
Line mode 1
80 0602h
Line address 2
80 0603h
Line mode 2
80 0604h
Line address 3
80 0605h
Line mode 3
80 0606h
Line address 4
80 0607h
Line mode 4
80 0608h
Line address 5
80 0609h
Line mode 5
80 060Ah
Line address 6
80 060Bh
Line mode 6
80 060Ch
Line address 7
80 060Dh
Line mode 7
80 060Eh
Line address 8
80 060Fh
Line mode 8
80 0610h
Line address 9
80 0611h
Line mode 9
Line address [7:0]: Line number to be processed by a VDP set by a line mode register (default 00h)
Line mode register [7:0]:
76
Bit 7:
0 = Disabled filters
1 = Enabled filters for teletext and CC (null byte filter) (default)
Bit 6:
0 = Send sliced VBI data to registers only (default)
1 = Send sliced VBI data to FIFO and registers, teletext data only goes to FIFO (default)
Bit 5:
0 = Allow VBI data with errors in the FIFO
1 = Do not allow VBI data with errors in the FIFO (default)
Bit 4:
0 = Disabled error detection and correction
1 = Enabled error detection and correction (teletext only) (default)
Bit 3:
0 = Field 1
1 = Field 2 (default)
Bits [2:0]:
000 = Teletext (WST625, Chinese teletext, NABTS 525)
001 = CC (US, Europe, Japan, China)
010 = WSS (525, 625)
011 = VITC
100 = VPS/PDC (PAL only), Gemstar (NTSC only)
101 = USER 1
110 = USER 2
111 = Reserved (active video) (default)
TVP5147M1PFP
SLES140A—March 2007
Functional Description
2.12.9
VDP VPS/Gemstar Data Register
Subaddress
80 0700h−80 070Ch
VPS: Read only
Subaddress
7
6
5
4
3
80 0700h
VPS byte 1
80 0701h
VPS byte 2
80 0702h
VPS byte 3
80 0703h
VPS byte 4
80 0704h
VPS byte 5
80 0705h
VPS byte 6
80 0706h
VPS byte 7
80 0707h
VPS byte 8
80 0708h
VPS byte 9
80 0709h
VPS byte 10
80 070Ah
VPS byte 11
80 070Bh
VPS byte 12
80 070Ch
VPS byte 13
2
1
0
These registers contain the entire VPS data line except the clock run-in code or the start code.
Gemstar: Read only
Subaddress
7
6
5
4
3
80 0700h
Gemstar frame code
80 0701h
Gemstar byte 1
80 0702h
Gemstar byte 2
80 0703h
Gemstar byte 3
80 0704h
Gemstar byte 4
80 0705h
Reserved
80 0706h
Reserved
80 0707h
Reserved
80 0708h
Reserved
80 0709h
Reserved
80 070Ah
Reserved
80 070Bh
Reserved
80 070Ch
Reserved
SLES140A—March 2007
2
1
TVP5147M1PFP
0
77
Functional Description
2.12.10 Analog Output Control 2 Register
Subaddress
A0 005Eh
Default
B2h
7
6
Reserved
Reserved
5
4
3
2
Input Select [1:0]
1
0
Gain [3:0]
Analog input select [1:0]: These bits are effective when manual input select bit is set to 1 at subaddress 7Fh,
bit 1.
00 =
01 =
10 =
11=
CH1 selected
CH2 selected
CH3 selected
CH4 selected (default)
Analog output PGA gain [3:0]: These bits are effective when analog output AGC is set to 1 at subaddress 7Fh,
bit 2.
Gain [3:0]
0000 =
0001 =
0010 = (default)
0011 =
0100 =
0101 =
0110 =
0111 =
0000 =
0001 =
0010 =
0011 =
0100 =
0101 =
0110 =
0111 =
Mode 1
1.30
1.56
1.82
2.08
2.34
2.60
2.86
3.12
3.38
3.64
3.90
4.16
4.42
4.68
4.94
5.20
2.12.11 Interrupt Configuration Register
Subaddress
B0 0060h
Default
00h
7
6
5
Reserved
4
3
2
Polarity
1
0
Reserved
Polarity: Interrupt terminal polarity
0 = Active high (default)
1 = Active low
78
TVP5147M1PFP
SLES140A—March 2007
Electrical Specifications
3
Electrical Specifications
3.1
Absolute Maximum Ratings†
Supply voltage range:
IOVDD to I/O GND . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0.5 V to 4 V
DVDD to DGND . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . −0.2 V to 2 V
A33VDD (see Note 1) to A33GND (see Note 2) . . . . . . . . . . . . . . . . −0.3 V to 3.6 V
A18VDD (see Note 3) to A18GND (see Note 4) . . . . . . . . . . . . . . . . . . −0.2 V to 2 V
Digital input voltage, VI to DGND . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . −0.5 V to 4.5 V
Digital output voltage, VO to DGND . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . −0.5 V to 4.5 V
Analog input voltage range AIN to AGND . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . −0.2 V to 2 V
Operating free-air temperature, TA . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0°C to 70°C
Storage temperature, Tstg . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . −65°C to 150°C
† Stresses beyond those listed under “Absolute Maximum Ratings” may cause permanent damage to the device. These are stress ratings only and
functional operation of the device at these or any other conditions beyond those indicated under “recommended operating conditions” is not
implied. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability.
NOTES: 1. CH1_A33VDD, CH2_A33VDD
2. CH1_A33GND, CH2_A33GND
3. CH1_A18VDD, CH2_A18VDD, A18VDD_REF, PLL_A18VDD
4. CH1_A18GND, CH2_A18GND, A18GND
3.2
Recommended Operating Conditions
MIN
NOM
MAX
UNIT
IOVDD
DVDD
Digital supply voltage
3
3.3
3.6
V
Digital supply voltage
1.65
1.8
1.95
V
AVDD33
AVDD18
Analog supply voltage
3
3.3
3.6
V
Analog supply voltage
1.65
1.8
1.95
V
VI(P-P)
VIH
Analog input voltage (ac-coupling necessary)
0.5
1
2
V
VIL
IOH
Digital input voltage, low (Note 2)
Output current, Vout = 2.4 V
−4
IOL
TA
Output current, Vout = 0.4 V
4
Digital input voltage, high (Note 1)
Operating free-air temperature
0.7 IOVDD
V
0.3 IOVDD
0
V
mA
mA
70
°C
NOTES: 1. Exception: 0.7 AVDD18 for XTAL1 terminal
2. Exception: 0.3 AVDD18 for XTAL1 terminal
3.2.1 Crystal Specifications
CRYSTAL SPECIFICATIONS
Frequency
Frequency tolerance
SLES140A—March 2007
MIN
NOM
MAX
14.31818
UNIT
MHz
±50
TVP5147M1PFP
ppm
79
Electrical Specifications
3.3
Electrical Characteristics
For minimum/maximum values: IOVDD = 3 V to 3.6 V, DVDD = 1.65 V to 1.95 V, AVDD33 = 3 V to 3.6 V,
AVDD18 = 1.65 V to 1.95 V, TA = 0°C to 70°C
For typical values: IOVDD = 3.3 V, DVDD = 1.8 V, AVDD33 = 3.3 V, AVDD18 = 1.8 V, TA = 25°C
3.3.1 DC Electrical Characteristics (see Note 1)
PARAMETER
TEST CONDITIONS
MIN
TYP
CVBS
6
S-video
6
IDDIO(D)
3.3-V IO digital supply current
IDD(D)
1.8-V digital supply current
IDD33(A)
3.3-V analog supply current
IDD18(A)
1.8-V analog supply current
PTOT
PSAVE
Total power dissipation (normal operation)
Total power dissipation (power save)
PDOWN
Ilkg
Total power dissipation (power down)
10
Ci
Input capacitance
VOH
VOL
Output voltage high
CVBS
55
S-video
55
CVBS
24
S-video
39
CVBS
79
MAX
UNIT
mA
mA
mA
mA
S-video
135
S-video
490
mW
100
mW
mW
Input leakage current
By design
10
µA
8
pF
0.8 IOVDD
V
Output voltage low
0.2 IOVDD
V
NOTE 1: Measured with a load of 10 kΩ in parallel to 15 pF.
3.3.2 Analog Processing and A/D Converters
3.3.2.1
Fs = 30 MSPS for CH1, CH2
PARAMETER
TEST CONDITIONS
Zi
Ci
Input impedance, analog video inputs
By design
Input capacitance, analog video inputs
By design
Vi(pp)
Input voltage range
Ccoupling = 0.1 µF
∆G
Gain control range
DNL
Differential nonlinearity
AFE only
INL
Integral nonlinearity
AFE only
Fr
Frequency response
Multiburst (60 IRE)
XTALK
Crosstalk
1 MHz
SNR
Signal-to-noise ratio, all channels
1 MHz, 1 VP-P
GM
Gain match (Note 1)
Full scale, 1 MHz
NS
Noise spectrum
Luma ramp (100 kHz to full, tilt-null)
DP
Differential phase
DG
Differential gain
VO
Output voltage
NOTE 1: Component inputs only
80
TVP5147M1PFP
MIN
TYP
MAX
200
kΩ
10
0.5
UNIT
1
pF
2
V
6
dB
0.75
1
LSB
1
2.5
LSB
−6
−0.9
dB
−50
54
dB
dB
1.5%
−58
dB
Modulated ramp
0.5
°
Modulated ramp
±1.5%
CL = 10 pF
2
2.4
V
SLES140A—March 2007
Electrical Specifications
3.3.3 Timing
3.3.3.1
Clocks, Video Data, Sync Timing
TEST CONDITIONS
(see NOTE 1)
PARAMETER
Duty cycle DATACLK
t1
t2
High time, DATACLK
t3
t4
Fall time, DATACLK
90% to 10%
Rise time, DATACLK
10% to 90%
MIN
TYP
MAX
45%
50%
55%
UNIT
18.5
Low time, DATACLK
ns
18.5
t5
Output delay time
NOTE 1: CL = 15 pF
ns
4
ns
4
ns
10
ns
t2
t1
VOH
DATACLK
VOL
t3
t4
VOH
Y, C, AVID, VS, HS, FID
Valid Data
Valid Data
VOL
t5
Figure 3−1. Clocks, Video Data, and Sync Timing
3.3.3.2
I2C Host Port Timing
PARAMETER
TEST CONDITIONS
MIN
TYP
MAX
UNIT
µs
t1
t2
Bus free time between STOP and START
t3
t4
Data setup time
100
ns
Setup time for a (repeated) START condition
0.6
µs
t5
t6
Setup time for a STOP condition
0.6
ns
Hold time for a (repeated) START condition
0.6
µs
t7
t8
Rise time VC1(SDA) and VC0(SCL) signal
250
Fall time VC1(SDA) and VC0(SCL) signal
250
ns
Cb
Capacitive load for each bus line
I2C clock frequency
400
pF
400
kHz
fI2C
1.3
Data hold time
0
0.9
Stop Start
µs
ns
Stop
VC1 (SDA)
Data
t1
t6
t7
VC0 (SCL)
t3
t2
Change
Data
t8
t6
t4
t5
Figure 3−2. I2C Host Port Timing
SLES140A—March 2007
TVP5147M1PFP
81
Electrical Specifications
82
TVP5147M1PFP
SLES140A—March 2007
Example Register Settings
4
Example Register Settings
The following example register settings are provided only as a reference. These settings, given the assumed
input connector, video format, and output format, set up the TVP5147M1 decoder and provide video output.
Example register settings for other features and the VBI data processor are not provided here.
4.1
Example 1
4.1.1 Assumptions
Input connector:
Composite (VI_1_A) (default)
Video format:
NTSC (J, M), PAL (B, G, H, I, N) or SECAM (default)
NOTE: NTSC-443, PAL-Nc, PAL-M, and PAL-60 are masked from the autoswitch process by
default. See the autoswitch mask register at address 04h.
Output format:
10-bit ITU-R BT.656 with embedded syncs (default)
4.1.2 Recommended Settings
Recommended I2C writes: For the given assumptions, only one write is required. All other registers are set
up by default.
I2C register address 08h = Luminance processing control 3 register
I2C data 00h = Optimizes the trap filter selection for NTSC and PAL
I2C register address 0Eh = Chrominance processing control 2 register
I2C data 04h = Optimizes the chrominance filter selection for NTSC and PAL
I2C register address 34h = Output formatter 2 register
I2C data 11h = Enables YCbCr output and the clock output
NOTE: HS/CS, VS/VBLK, AVID, FID, and GLCO are logic inputs by default. See output
formatter 3 and 4 registers at addresses 35h and 36h, respectively.
4.2
Example 2
4.2.1 Assumptions
Input connector:
S-video [VI_2_C (luma), VI_1_C (chroma)]
Video format:
NTSC (J, M, 443), PAL (B, D, G, H, I, N, Nc, 60) or SECAM (default)
Output format:
10-bit ITU-R BT.656 with discrete sync outputs
4.2.2 Recommended Settings
Recommended I2C writes: This setup requires additional writes to output the discrete sync 10-bit 4:2:2 data,
HS, and VS, and to autoswitch between all video formats mentioned above.
SLES140A—March 2007
TVP5147M1PFP
83
Example Register Settings
I2C register address 00h = Input select register
I2C data 46h = Sets luma to VI_2_C and chroma to VI_1_C
I2C register address 04h = Autoswitch mask register
I2C data 3Fh = Includes NTSC 443 and PAL (M, Nc, 60) in the autoswitch
I2C register address 08h = Luminance processing control 3 register
I2C data 00h = Optimizes the trap filter selection for NTSC and PAL
I2C register address 0Eh = Chrominance processing control 2 register
I2C data 04h = Optimizes the chrominance filter selection for NTSC and PAL
I2C register address 33h = Output formatter 1 register
I2C data 41h = Selects the 10-bit 4:2:2 output format
I2C register address 34h = Output formatter 2 register
I2C data 11h = Enables YCbCr output and the clock output
I2C register address 36h = Output formatter 4 register
I2C data 11h = Enables HS and VS sync outputs
4.3
Example 3
4.3.1 Assumptions
Input connector:
Component [VI_1_B (Pb), VI_2_B (Y), VI_3_B (Pr)]
Video format:
480I, 576I
Output format:
20-bit ITU-R BT.656 with discrete sync outputs
4.3.2 Recommended Settings
Recommended I2C writes: This setup requires additional writes to output the discrete sync 20-bit 4:2:2 data,
HS, and VS, and to autoswitch between all video formats mentioned above.
84
TVP5147M1PFP
SLES140A—March 2007
Example Register Settings
I2C register address 00h = Input select register
I2C data 95h = Sets Pb to VI_1_B, Y to VI_2_B, and Pr to VI_3_B
I2C register address 04h = Autoswitch mask register
I2C data 3Fh = Includes NTSC 443 and PAL (M, Nc, 60) in the autoswitch
I2C register address 08h = Luminance processing control 3 register
I2C data 00h = Optimizes the trap filter selection for NTSC and PAL
I2C register address 0Eh = Chrominance processing control 2 register
I2C data 04h = Optimizes the chrominance filter selection for NTSC and PAL
I2C register address 33h = Output formatter 1 register
I2C data 41h = Selects the 20-bit 4:2:2 output format
I2C register address 34h = Output formatter 2 register
I2C data 11h = Enables YCbCr output and the clock output
I2C register address 36h = Output formatter 4 register
I2C data AFh = Enables HS and VS sync outputs
SLES140A—March 2007
TVP5147M1PFP
85
Example Register Settings
86
TVP5147M1PFP
SLES140A—March 2007
Application Information
5
Application Information
5.1
Application Example
C0
FID
C1
C2
VS/VBLK
2.2 kΩ
HS/CS
A3.3VDD
XTAL2
A1.8VDD
0.1 µF (2)
1 kΩ
VI_1_A
75 Ω
22 kΩ
VI_1A
VI_1B
VI_1C
75 Ω (3)
1
2
0.1 µF (3)
0.1 µF (2)
0.1 µF (3)
VI_2A
VI_2B
VI_2C
75 Ω (3)
0.1 µF (3)
VI_3A
VI_3B
VI_3C
75 Ω (3)
0.1 µF (3)
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
63
62
61
0.1 µF (2)
22 µF
CH1_A18GND
CH1_A18VDD
PLL_A18GND
PLL_A18VDD
XTAL2
XTAL1
VS/VBLK
HS/CS
FID
C_0
C_1
DGND
DVDD
C_2
C_3
C_4
C_5
IOGND
IOVDD
VOUT
DVDD1.8V
12 kΩ
80
79
78
77
76
75
74
73
72
71
70
69
68
67
66
65
64
22 Ω
IOVDD3.3V
C3
C4
C5
XTAL1
C_6
C_7
C_8
C_9
DGND
DVDD
Y_0
Y_1
Y_2
Y_3
Y_4
IOGND
IOVDD
VI_1_B
VI_1_C
CH1_A33GND
CH1_A33VDD
CH2_A33VDD
CH2_A33GND
VI_2_A
VI_2_B
VI_2_C
CH2_A18GND
TVP5147M1
CH2_A18VDD
A18VDD_REF
A18GND_REF
NC
NC
VI_3_A
VI_3_B
VI_3_C
NC
NC
Y_5
Y_6
Y_7
Y_8
Y_9
DGND
DVDD
60
59
58
57
56
55
54
53
52
51
50
49
48
47
46
45
44
43
42
41
0.1 µF
C6
C7
C8
C9
Y_0
Y_1
Y_2
Y_3
Y_4
0.1 µF
Y_5
Y_6
Y_7
Y_8
Y_9
0.1 µF
39
40
NC
VI_4A
A18GND
A18VDD
AGND
DGND
SCL
SDA
INTREQ
DVDD
DGND
PWDN
RESETB
FSS
AVID
GLCO/I2CA
IOVDD
IOGND
DATACLK
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
NC
0.1 µF
0.1 µF
VI_4A
75 Ω
XTAL2
14.31818 MHz
CL1
CL2
0.1 µF
IOVDD
XTAL1
10 kΩ
GLCO/I2CA
2.2 kΩ (2)
0.1 µF
GND
2
1
3
0.1 µF
I2C Address selection
1−2 Base Addr. 0xBA
2−3 Base Addr. 0xB8
10 kΩ
DATACLK
GLCO/I2CA
AVID
FSS
RESETB
PWDN
INTREQ
SDA
SCL
NOTE: If XTAL1 is connected to clock source, input voltage high must be 1.8 V.
TVP5147 can be a drop-in replacement for TVP5146.
Terminals 69 and 71 must be connected to ground through pulldown resistors.
Figure 5−1. Example Application Circuit
SLES140A—March 2007
TVP5147M1PFP
87
Application Information
5.2
Designing With PowerPADt Devices
The TVP5147 device is housed in a high-performance, thermally enhanced, 80-terminal PowerPAD package
(TI package designator: 80PFP). Use of the PowerPAD package does not require any special considerations
except to note that the thermal pad, which is an exposed die pad on the bottom of the device, is a metallic
thermal and electrical conductor. Therefore, if not implementing the PowerPAD PCB features, the use of solder
masks (or other assembly techniques) can be required to prevent any inadvertent shorting by the exposed
thermal pad of connection etches or vias under the package. The recommended option, however, is not to run
any etches or signal vias under the device, but to have only a grounded thermal land as in the following
explanation. Although the actual size of the exposed die pad may vary, the minimum size required for the
keep-out area for the 80-terminal PFP PowerPAD package is 8 mm × 8 mm.
It is recommended that there be a thermal land, which is an area of solder-tinned-copper, underneath the
PowerPAD package. The thermal land varies in size, depending on the PowerPAD package being used, the
PCB construction, and the amount of heat that needs to be removed. In addition, the thermal land may or may
not contain numerous thermal vias depending on PCB construction.
Other requirements for using thermal lands and thermal vias are detailed in the TI application note
PowerPADt Thermally Enhanced Package Application Report, (SLMA002), available via the TI Web pages
beginning at URL: http://www.ti.com
For the TVP5147 device, this thermal land must be grounded to the low-impedance ground plane of the
device. This improves not only thermal performance but also the electrical grounding of the device. It is also
recommended that the device ground terminal landing pads be connected directly to the grounded thermal
land. The land size must be as large as possible without shorting device signal terminals. The thermal land
can be soldered to the exposed thermal pad using standard reflow soldering techniques.
While the thermal land can be electrically floated and configured to remove heat to an external heat sink, it
is recommended that the thermal land be connected to the low-impedance ground plane for the device. More
information can be obtained from the TI application note PHY Layout (SLLA020).
PowerPAD is a trademark of Texas Instruments.
88
TVP5147M1PFP
SLES140A—March 2007
PACKAGE OPTION ADDENDUM
www.ti.com
31-Jan-2008
PACKAGING INFORMATION
Orderable Device
Status (1)
Package
Type
Package
Drawing
Pins Package Eco Plan (2)
Qty
TVP5147M1PFP
ACTIVE
HTQFP
PFP
80
TVP5147M1PFPG4
ACTIVE
HTQFP
PFP
TVP5147M1PFPR
ACTIVE
HTQFP
TVP5147M1PFPRG4
ACTIVE
HTQFP
96
Lead/Ball Finish
MSL Peak Temp (3)
Green (RoHS &
no Sb/Br)
CU NIPDAU
Level-3-260C-168 HR
80
Green (RoHS &
no Sb/Br)
CU NIPDAU
Level-3-260C-168 HR
PFP
80
1000 Green (RoHS &
no Sb/Br)
CU NIPDAU
Level-3-260C-168 HR
PFP
80
TBD
Call TI
Call TI
(1)
The marketing status values are defined as follows:
ACTIVE: Product device recommended for new designs.
LIFEBUY: TI has announced that the device will be discontinued, and a lifetime-buy period is in effect.
NRND: Not recommended for new designs. Device is in production to support existing customers, but TI does not recommend using this part in
a new design.
PREVIEW: Device has been announced but is not in production. Samples may or may not be available.
OBSOLETE: TI has discontinued the production of the device.
(2)
Eco Plan - The planned eco-friendly classification: Pb-Free (RoHS), Pb-Free (RoHS Exempt), or Green (RoHS & no Sb/Br) - please check
http://www.ti.com/productcontent for the latest availability information and additional product content details.
TBD: The Pb-Free/Green conversion plan has not been defined.
Pb-Free (RoHS): TI's terms "Lead-Free" or "Pb-Free" mean semiconductor products that are compatible with the current RoHS requirements
for all 6 substances, including the requirement that lead not exceed 0.1% by weight in homogeneous materials. Where designed to be soldered
at high temperatures, TI Pb-Free products are suitable for use in specified lead-free processes.
Pb-Free (RoHS Exempt): This component has a RoHS exemption for either 1) lead-based flip-chip solder bumps used between the die and
package, or 2) lead-based die adhesive used between the die and leadframe. The component is otherwise considered Pb-Free (RoHS
compatible) as defined above.
Green (RoHS & no Sb/Br): TI defines "Green" to mean Pb-Free (RoHS compatible), and free of Bromine (Br) and Antimony (Sb) based flame
retardants (Br or Sb do not exceed 0.1% by weight in homogeneous material)
(3)
MSL, Peak Temp. -- The Moisture Sensitivity Level rating according to the JEDEC industry standard classifications, and peak solder
temperature.
Important Information and Disclaimer:The information provided on this page represents TI's knowledge and belief as of the date that it is
provided. TI bases its knowledge and belief on information provided by third parties, and makes no representation or warranty as to the
accuracy of such information. Efforts are underway to better integrate information from third parties. TI has taken and continues to take
reasonable steps to provide representative and accurate information but may not have conducted destructive testing or chemical analysis on
incoming materials and chemicals. TI and TI suppliers consider certain information to be proprietary, and thus CAS numbers and other limited
information may not be available for release.
In no event shall TI's liability arising out of such information exceed the total purchase price of the TI part(s) at issue in this document sold by TI
to Customer on an annual basis.
Addendum-Page 1