TX-D High Breakdown Voltage Relay RoHS compliant FEATURES 1. Approved to the supplementary insulation class in the EN standards (EN60950). The insulation distance between the contact and coil meet the supplementary insulation class of the EN60950 standards as required for equipment connected to the telephone lines in Europe. Satisfies the following conditions: • Clearances: 2.0 mm .079 inch or more • Creepage distance: 2.5 mm .098 inch or more 2. 3,000 V breakdown voltage between contact and coil. The body block construction of the coil that is sealed formation offers a high breakdown voltage of 3,000 V between contact and coil. 3. Nominal operating power: High sensitivity of 200mW By using the highly efficient polar magnetic circuit “seesaw balance mechanism”, a nominal operating power of 200 mW has been achieved. 4. High contact capacity: 2 A 30 V DC 5. High contact reliability achieved with gold-clad crossbar twin contacts and the use of gas expelling materials during formation. *We also offer a range of products with AgPd contacts suitable for use in low level load analog circuits (Max. 10V DC 10 mA). 6. Outstanding vibration and shock resistance. Functional shock resistance: 750 m/s2 Destructive shock resistance: 1,000 m/s2 Functional vibration resistance: 10 to 55 Hz (at double amplitude of 3.3 mm .130 inch) TX-D RELAYS Destructive vibration resistance: 10 to 55 Hz (at double amplitude of 5 mm .197 inch) 7. Sealed construction allows automatic washing. TYPICAL APPLICATIONS 1. Facsimile 2. Modem 3. Communications (xDSL) 4. Medical equipment 5. Security ORDERING INFORMATION TXD 2 Contact arrangement 2: 2 Form C Surface-mount availability Nil: Standard PC board terminal SA: SA type Operating function Nil: Single side stable L: 1 coil latching Type of operation Nil: Standard type 2M: M.B.B. type Nominal coil voltage (DC) 3, 4.5, 5, 6, 9, 12, 24V Contact material Nil: Standard contact (Ag+Au clad) 1: AgPd contact (low level load); AgPd+Au clad (stationary), AgPd (movable) Packing style Nil: Tube packing X: Tape and reel (picked from 1/3/4/5-pin side) Z: Tape and reel packing (Picked from the 8/9/10/12-pin side) Note: In case of 5 V transistor drive circuit, it is recommended to use 4.5 V type relay. Panasonic Corporation Automation Controls Business Unit industrial.panasonic.com/ac/e/ ASCTB19E 201209-T TX-D TYPES 1. Standard (B.B.M.) type 1) Standard PC board terminal Contact arrangement Nominal coil voltage 2 Form C 3V DC 4.5V DC 5V DC 6V DC 9V DC 12V DC 24V DC Single side stable Part No. TXD2-3V TXD2-4.5V TXD2-5V TXD2-6V TXD2-9V TXD2-12V TXD2-24V 1 coil latching Part No. TXD2-L-3V TXD2-L-4.5V TXD2-L-5V TXD2-L-6V TXD2-L-9V TXD2-L-12V TXD2-L-24V Standard packing: Tube: 40 pcs.; Case: 1,000 pcs. Note: Please add “-1” to the end of the part number for AgPd contacts (low level load). 2) Surface-mount terminal (1) Tube packing Contact arrangement Nominal coil voltage 2 Form C 3V DC 4.5V DC 5V DC 6V DC 9V DC 12V DC 24V DC Single side stable Part No. TXD2SA-3V TXD2SA-4.5V TXD2SA-5V TXD2SA-6V TXD2SA-9V TXD2SA-12V TXD2SA-24V 1 coil latching Part No. TXD2SA-L-3V TXD2SA-L-4.5V TXD2SA-L-5V TXD2SA-L-6V TXD2SA-L-9V TXD2SA-L-12V TXD2SA-L-24V Standard packing: Tube: 40 pcs.; Case: 1,000 pcs. Note: Please add “-1” to the end of the part number for AgPd contacts (low level load). (2) Tape and reel packing Contact arrangement Nominal coil voltage 2 Form C 3V DC 4.5V DC 5V DC 6V DC 9V DC 12V DC 24V DC Single side stable Part No. TXD2SA-3V-Z TXD2SA-4.5V-Z TXD2SA-5V-Z TXD2SA-6V-Z TXD2SA-9V-Z TXD2SA-12V-Z TXD2SA-24V-Z 1 coil latching Part No. TXD2SA-L-3V-Z TXD2SA-L-4.5V-Z TXD2SA-L-5V-Z TXD2SA-L-6V-Z TXD2SA-L-9V-Z TXD2SA-L-12V-Z TXD2SA-L-24V-Z Standard packing: Tape and reel: 500 pcs.; Case: 1,000 pcs. Notes: 1. Tape and reel packing symbol “-Z” is not marked on the relay. “X” type tape and reel packing (picked from 1/3/4/5-pin side) is also available. 2. Please add “-1” to the part number for AgPd contacts (low level load). (Ex. TXD2SA-3V-1-Z) 2. M.B.B type 1) Standard PC board terminal Contact arrangement Nominal coil voltage 2 Form C 3V DC 4.5V DC 5V DC 6V DC 9V DC 12V DC 24V DC Single side stable Part No. TXD2-2M-3V TXD2-2M-4.5V TXD2-2M-5V TXD2-2M-6V TXD2-2M-9V TXD2-2M-12V TXD2-2M-24V Standard packing: Tube: 40 pcs.; Case: 1,000 pcs. ASCTB19E 201209-T Panasonic Corporation Automation Controls Business Unit industrial.panasonic.com/ac/e/ TX-D 2) Surface-mount terminal (1) Tube packing Contact arrangement Nominal coil voltage 2 Form C 3V DC 4.5V DC 5V DC 6V DC 9V DC 12V DC 24V DC Single side stable Part No. TXD2SA-2M-3V TXD2SA-2M-4.5V TXD2SA-2M-5V TXD2SA-2M-6V TXD2SA-2M-9V TXD2SA-2M-12V TXD2SA-2M-24V Standard packing: Tube: 40 pcs.; Case: 1,000 pcs. (2) Tape and reel packing Contact arrangement Nominal coil voltage 2 Form C 3V DC 4.5V DC 5V DC 6V DC 9V DC 12V DC 24V DC Single side stable Part No. TXD2SA-2M-3V-Z TXD2SA-2M-4.5V-Z TXD2SA-2M-5V-Z TXD2SA-2M-6V-Z TXD2SA-2M-9V-Z TXD2SA-2M-12V-Z TXD2SA-2M-24V-Z Standard packing: Tape and reel: 500 pcs.; Case: 1,000 pcs. Notes: 1. Types designed to withstand strong vibration caused, for example, by the use of terminal cutters, can also be ordered. However, please contact us if you need parts for use in low level load. (Ex. TXD2SA-2M-3V-1-Z) 2. Tape and reel packing symbol “-Z” is not marked on the relay. “X” type tape and reel packing (picked from 1/3/4/5-pin side) is also available. RATING 1. Coil data [Standard (B.B.M.) type] 1) Single side stable Nominal coil voltage Pick-up voltage (at 20°C 68°F) Drop-out voltage (at 20°C 68°F) Nominal operating current [±10%] (at 20°C 68°F) Coil resistance [±10%] (at 20°C 68°F) Nominal operating power Max. applied voltage (at 20°C 68°F) 200mW 120%V of nominal voltage 3V DC 66.7mA 45Ω 4.5V DC 5V DC 6V DC 9V DC 12V DC 24V DC 44.4mA 40.0mA 33.3mA 22.2mA 16.7mA 9.6mA 101Ω 125Ω 180Ω 405Ω 720Ω 2,504Ω 230mW Nominal operating current [±10%] (at 20°C 68°F) Coil resistance [±10%] (at 20°C 68°F) Nominal operating power Max. applied voltage (at 20°C 68°F) 150mW 120%V of nominal voltage 75%V or less of nominal voltage* (Initial) 10%V or more of nominal voltage* (Initial) 2) 1 coil latching Nominal coil voltage Set voltage (at 20°C 68°F) Reset voltage (at 20°C 68°F) 3V DC 50.0mA 60Ω 4.5V DC 5V DC 6V DC 9V DC 12V DC 24V DC 33.3mA 30.0mA 25.0mA 16.7mA 12.5mA 7.1mA 135Ω 166Ω 240Ω 540Ω 960Ω 3,388Ω 170mW Nominal operating current [±10%] (at 20°C 68°F) Coil resistance [±10%] (at 20°C 68°F) Nominal operating power Max. applied voltage (at 20°C 68°F) 3V DC 83.3mA 36Ω 4.5V DC 5V DC 6V DC 9V DC 12V DC 24V DC 55.6mA 50.0mA 41.7mA 27.8mA 20.8mA 11.3mA 81Ω 100Ω 144Ω 324Ω 576Ω 2,133Ω 250mW 120%V of nominal voltage 75%V or less of nominal voltage* (Initial) 75%V or less of nominal voltage* (Initial) [M.B.B. type] Nominal coil voltage Pick-up voltage (at 20°C 68°F) 75%V or less of nominal voltage* (Initial) Drop-out voltage (at 20°C 68°F) 10%V or more of nominal voltage* (Initial) 270mW *Pulse drive (JIS C 5442-1986) Panasonic Corporation Automation Controls Business Unit industrial.panasonic.com/ac/e/ ASCTB19E 201209-T TX-D 2. Specifications Characteristics Contact Item Arrangement Contact resistance (Initial) Specifications 2 Form C 2 Form D (M.B.B.type) Max. 100 mΩ (By voltage drop 6 V DC 1A) Standard contact: Ag+Au clad, AgPd contact (low level load): AgPd+Au clad (stationary), AgPd (movable) Contact material Standard contact: 2 A 30 V DC, AgPd contact: 1 A 30 V DC (resistive load) Nominal switching capacity Standard contact: 60 W (DC), AgPd contact: 30 W (DC) (resistive load) 220 V DC Standard contact: 2 A, AgPd contact: 1 A 10µA10mV DC Max. switching power Max. switching voltage Max. switching current Min. switching capacity (Reference value)*1 Nominal operating Single side stable power 1 coil latching Rating 200mW (3 to 12 V DC), 230mW (24 V DC) 150mW (3 to 12 V DC), 170mW (24 V DC) Insulation resistance (Initial) Breakdown voltage (Initial) Electrical characteristics Surge breakdown voltage (Initial) Vibration resistance Functional Destructive Max. 50°C 122°F (By resistive method, nominal coil voltage applied to the coil; contact carrying current: 2A [1A: M.B.B.].) Max. 4 ms [Max. 4 ms] (Nominal coil voltage applied to the coil, excluding contact bounce time.) Max. 4 ms [Max. 4 ms] (Nominal coil voltage applied to the coil, excluding contact bounce time.) (without diode) Min. 750 m/s2 Min. 500 m/s2 (Half-wave pulse of sine wave: 6 ms; (Half-wave pulse of sine wave: 11 ms; detection time: 10µs.) detection time: 10µs.) Min. 1,000 m/s2 {100G} (Half-wave pulse of sine wave: 6 ms.) Destructive 10 to 55 Hz at double amplitude of 3.3 mm (Detection time: 10µs.) 10 to 55 Hz at double amplitude of 5 mm Min. 107 (at 180 cpm) Min. 108 (at 180 cpm) Min. 105 (2 A 30 V DC resistive), Min. 105 (1 A 30 V DC resistive) (at 20 cpm) Min. 5×105 (1 A 30 V DC resistive) (at 20 cpm) Ambient temperature: –40°C to +85°C –40°F to +185°F; Humidity: 5 to 85% R.H. (Not freezing and condensing at low temperature) 20 cpm Approx. 2 g .071 oz Mechanical Expected life Conditions 250mW (1.5 to 12 V DC), 270mW (24 V DC) — 6,000 V, 1.2 × 50µs Release time [Reset time] (at 20°C 68°F) Functional 110 V DC 1A 1,000 Vrms for 1min. (Detection current: 10mA) 500 Vrms for 1min. (Detection current: 10mA) 3,000 Vrms for 1min. (Detection current: 10mA) 3,000 Vrms for 1min. (Detection current: 10mA) 1,000 Vrms for 1min. (Detection current: 10mA) 1,500 V (10×160µs) (FCC Part 68) — Operate time [Set time] (at 20°C 68°F) Shock resistance 30 W (DC) (resistive load) Min. 1,000MΩ (at 500V DC) Measurement at same location as “Initial breakdown voltage” section. Between open contacts Between contact and coil Between contact sets Between open contacts Between contacts and coil*1 Temperature rise (at 20°C 68°F) Mechanical characteristics 1 A 30 V DC (resistive load) Electrical Conditions for operation, transport and storage*2 Max. operating speed (at rated load) Unit weight Notes: *1 This value can change due to the switching frequency, environmental conditions, and desired reliability level, therefore it is recommended to check this with the actual load. (AgPd contact type is available for low level load switching [10V DC, 10mA max. level]) *2 The upper operation ambient temperature limit is the maximum temperature that can satisfy the coil temperature rise value. Refer to [6] AMBIENT ENVIRONMENT in GENERAL APPLICATION GUIDELINES (Page 24). REFERENCE DATA 1. Maximum switching capacity 2. Life curve 3. Mechanical life 2.0 DC resistive load 1.0 0.5 0.4 0.3 No. of operations ×104 Switching current, A 3.0 100 50 30 20 30V DC resistive load 10 0.2 Ratio against the rated voltage, %V Tested sample: TXD2-5V, 10 pcs. Operating speed: 180 cpm 100 90 Pick-up voltage 80 Max. 70 60 Min. 50 Drop-out voltage 40 Max. 30 Min. 20 10 0 20 30 ASCTB19E 201209-T 50 100 200 300 Contact voltage, V 0 Panasonic Corporation 1.0 2.0 Switching current, A Automation Controls Business Unit 0 0 10 100 1000 4 No. of operations, ×10 industrial.panasonic.com/ac/e/ 10000 TX-D 4. Electrical life (2 A 30 V DC resistive load) 5-(1). Coil temperature rise Tested sample: TXD2-5V, 6 pcs. Operating speed: 20 cpm Tested sample: TXD2-5V, 6 pcs. Measured portion: Inside the coil Ambient temperature: 25°C 77°F, 70°C 158°F Change of contact resistance 100 90 90 Pick-up voltage 80 Max. 70 Min. 60 50 Drop-out voltage 40 Max. 30 20 80 70 60 40 Min. 30 50 40 2A 0 10 Tested sample: TXD2-24V, 6 pcs. Measured portion: Inside the coil Ambient temperature: 25°C 77°F, 70°C 158°F 70 +25°C +77°F +70°C +158°F 60 50 40 2A 2A 30 0A 0A 20 0 2 4 6 8 No. of operations, ×104 5 5 Operate time Release time 4 Max. Min. 3 Max. Min. 2 Operate time Release time 4 Min. 3 2 Max. Min. 1 70 80 90 100 0 120 110 70 80 90 100 110 120 Coil applied voltage, %V 8. High-frequency characteristics (Isolation) 9. High-frequency characteristics (Insertion loss) Tested sample: TXD2-12V, 2 pcs. Tested sample: TXD2-12V, 2 pcs. Insertion loss, dB 40 x 20 Drop-out voltage x Pick-up voltage 20 40 60 80 Ambient temperature, °C Isolation, dB Variation ratio, % 0 Max. Coil applied voltage, %V Tested sample: TXD2-5V, 5 pcs. 110 120 Coil applied voltage, %V Tested sample: TXD2-5V, 10 pcs. 0 7. Ambient temperature characteristics 100 Tested sample: TXD2-5V, 10 pcs. 110 120 Coil applied voltage, %V –40 –20 0A 0A 6-(2). Operate/release time characteristics (without diode) 10 100 20 6-(1). Operate/release time characteristics (with diode) 1 0 2A 0 10 Operate and release time, ms 4 6 8 No. of operations, ×104 Operate and release time, ms 2 30 10 10 0 +25°C +77°F +70°C +158°F 60 20 Min. 5-(2). Coil temperature rise Temperature rise, °C Max. 50 10 0 70 Temperature rise, °C 100 Contact resistance, mΩ Ratio against the rated voltage, %V Change of pick-up and drop-out voltage 100 –20 1.0 0.8 0.6 50 0.4 0.2 –40 0 10 100 Frequency, MHz 0 1,000 10 100 Frequency, MHz 1,000 11-(2). Influence of adjacent mounting Tested sample: TXD2-12V, 6 pcs. Tested sample: TXD2-12V, 6 pcs. X' Y 1000m/s 2 Deenergized condition Energized condition X 1000m/s 2 Z 1000m/s 2 1000m/s 2 Z' 1000m/s 2 X' 1000m/s 2 Y' 5 ON 0 –5 ON OFF OFF 5 Drop-out voltage 0 OFF –5 0 Panasonic Corporation ON Pick-up voltage 2 4 6 8 10 .079 .157 .236 .315 .394 Inter-relay distance Automation Controls Business Unit Rate of change, % X Rate of change, % Z Z' Y Y' Rate of change, % 11-(1). Influence of adjacent mounting Tested sample: TXD2-5V, 6 pcs Rate of change, % 10. Malfunctional shock (single side stable) ON 5 0 Pick-up voltage ON OFF 5 0 Drop-out voltage OFF –5 OFF 0 , mm inch ON –5 2 4 6 8 10 .079 .157 .236 .315 .394 Inter-relay distance industrial.panasonic.com/ac/e/ , mm inch ASCTB19E 201209-T TX-D 12. Actual load test (35 mA 48 V DC wire spring relay load) Circuit 458 Ω + 0.08 µF 48 V DC – 0.08 µF 4 TXD 3 458 Ω Wire spring relay Change of contact resistance 100 100 90 90 80 Pick-up voltage Max. Min. 70 60 50 Drop-out voltage 40 30 Max. 20 Min. 80 70 60 50 40 Max. Min. 30 20 10 10 0 Contact resistance, mΩ Ratio against the rated voltage, %V Change of pick-up and drop-out voltage Tested sample: TXD2-5V, 6 pcs. 0 10 20 30 40 No. of operation, ×104 50 0 0 10 20 30 40 No. of operation, ×104 50 13-(1). Distribution of M.B.B. time Tested sample: TXD2-2M-5V, 50 pcs. Terminal No. 3-4-5: ON Terminal No. 3-4-5: OFF 60 60 300.5 µs x: σn-1: 55.3 µs Min.: 165 µs Max.: 415 µs 50 40 298.8 µs x: σn-1: 51.8 µs Min.: 205 µs Max.: 432 µs 50 40 30 30 22 20 20 16 1 350 400 450 µs max. 250 300 350 400 µs min. 150 200 250 300 350 400 450 µs max. ~ 300 200 ~ 250 150 ~ 200 100 ~ 150 0 ~ 400 µs min. ~ 350 ~ 300 ~ 250 ~ 200 ~ 150 ~ 1 100 ~ 0 8 10 6 ~ 7 2 ~ 10 13 12 12 13-(2). Distribution of M.B.B. time 14. Surge breakdown voltage test Tested sample: TXD2-2M-5V, 50 pcs. Terminal No. 8-9-10: ON 60 Tested sample: TXD2-3V, 30 pcs. Terminal No. 8-9-10: OFF 50 14 60 293.4 µs x: σn-1: 60.4 µs Min.: 155 µs Max.: 445 µs 281.4 µs x: σn-1: 58.3 µs Min.: 120 µs Max.: 421 µs 50 40 40 30 30 12 10 8 6 10 300 350 400 450 µs max. DIMENSIONS (mm inch) 200 250 300 350 400 µs min. 150 200 250 300 350 400 450 µs max. The CAD data of the products with a ~ 250 150 ~ 200 100 ~ 150 0 2 4 1 ~ 400 µs min. ~ 350 ~ 300 ~ 250 ~ 200 ~ 150 ~ 6 4 1 100 ~ 0 4 3 ~ 5 4 15 10 ~ 10 10 19 20 CAD Data ~ 18 20 0 7000 7200 7400 7600 7800 8000 8200 8400 8600 Surge breakdown voltage, V mark can be downloaded from: http://industrial.panasonic.com/ac/e/ 1) Standard PC board terminal CAD Data External dimensions Standard PC board terminal 7.40 .291 15.00 .591 2.54 .100 0.65 .026 8.20 .323 0.50 .020 1.15 .045 5.08 .200 2.54 .100 3.50 .138 PC board pattern (Bottom view) 10.16 .400 + 5.08 .200 0.25 5.08 .010 .200 8-1.0 dia. 8-.039 dia. Tolerance: ±0.1 ±.004 ASCTB19E 201209-T Panasonic Corporation Schematic (Bottom view) Single side stable Automation Controls Business Unit − 1 3 4 5 12 10 9 8 1 coil latching − + 1 3 4 5 12 10 9 8 Direction indication Direction indication (Deenergized condition) (Reset condition) industrial.panasonic.com/ac/e/ TX-D 2) Surface-mount terminal CAD Data External dimensions (General tolerance: ±0.3 ±.012) Single side stable and 1 coil latching Type 15 .591 7.4 .291 8.2 .323 SA type 0.65 .026 0.5 .020 Suggested mounting pad (Top view) (Tolerance: ±0.1 ±.004) Single side stable and 1 coil latching 5.08 .200 2.54 .100 1 3.16 .039 .124 8.4 .331 5.08 .200 9.4±0.5 .370±.020 5.08 .200 2.54 .100 0.25 .010 7.24 .285 Schematic (Top view) Single side stable − + 12 10 9 8 1 3 4 5 1 coil latching + − 12 10 9 8 1 3 4 5 Direction indication Direction indication (Deenergized condition) (Reset condition) NOTES 1. Packing style 1) Tube packing The relay is packed in a tube with the relay orientation mark on the left side, as shown in the figure below. Orientation (indicates PIN No.1) stripe 3) Ambient temperature when transporting and during storage with the product in its original packaging: –40 to +70°C –40 to +158°F 2. Automatic insertion To maintain the internal function of the relay, the chucking pressure should not exceed the values below. A Stopper (gray) C 3. M.B.B. type A small OFF time may be generated by the contact bounce during contact switching. Check the actual circuit carefully. If the relay is dropped accidentally, check the appearance and characteristics including M.B.B. time before use. B Min. 10µs Stopper (green) 2) Tape and reel packing (surface-mount terminal type) (1) Tape dimensions mm inch 1.5 Relay polarity bar .059 (Z type) +0.1 0 +.004 0 dia. dia. 2.0 .079 1.75 .069 4.0 .157 0.4 .016 C A B 11.5 .453 D 16.0 10.0 .394 .630 TX-D relays 15.5 .610 24.0 ±0.3 ±0.2 .945 ±.012 9.2±.008 .362 Tape coming out direction (2) Dimensions of plastic reel mm inch Chucking pressure in the direction A: 4.9 N {500gf} or less Chucking pressure in the direction B: 9.8 N {1 kgf} or less Chucking pressure in the direction C: 9.8 N {1 kgf} or less Please chuck the portion. Avoid chucking the center of the relay. In addition, excessive chucking pressure to the pinpoint of the relay should be avoided. 500Ω 5V DC Measuring condition of M.B.B. time For general cautions for use, please refer to the “Cautions for use of Signal Relays” or “General Application Guidelines”. 2.0 .079 13 dia. .512 dia. 21 dia. .827 dia. 80 ±1 dia. 3.150 ±.039 dia. 380 ±2 dia. 14.961 ±.079 dia. 24.4+20 .961+.079 0 2.0±0.2 .079±.008 Panasonic Corporation Automation Controls Business Unit industrial.panasonic.com/ac/e/ ASCTB19E 201209-T