ULN2065B - ULN2067B ULN2069B - ULN2071B ULN2075B - ULN2077B ® 80 V - 1.5 A QUAD DARLINGTON SWITCHES . .. . . . OUTPUT CURRENT TO 1.5 A EACH DARLINGTON MINIMUM BREAKDOWN 80 V SUSTAINING VOLTAGE AT LEAST 50 V INTEGRAL SUPPRESSION DIODES (ULN2065B, ULN2067B, ULN2069B and ULN2071B) ISOLATED DARLINGTON PINOUT (ULN2075B and ULN2077B) VERSIONS COMPATIBLE WITH ALL POPULAR LOGIC FAMILIES DESCRIPTION Designed to interface logic to a wide variety of high current, high voltage loads, these devices each contain four NPN darlington switches delivering up to 1.5 A with a specified minimum breakdown of 80 V and a sustaining voltage of 50 V. The ULN2065B, ULN2067B, ULN2069B and ULN2071B contain integral suppression diodes for inductive loads and have common emitters ; the ULN2075B and ULN2077B feature isolated darlington pinouts and are intended for applications such as emitter follower configurations. Inputs of the ULN2065B, ULN2069B and ULN2075B are compatible with popular 5 V logic families and the ULN2067B, ULN2071B and ULN2077B are compatible with 615 VCMOS and PMOS. The ULN2069B and ULN2071B include a predriver stage to provide extragain, reducing the load on control logic. POWERDIP 12 + 2 + 2 PIN CONNECTIONS AND ORDER CODES ULN2065B ULN2067B September 2003 ULN2069B ULN2071B ULN2075B ULN2077B 1/7 ULN2065B-ULN2067B-ULN2069B-ULN2071B-ULN2075B-ULN2077B SCHEMATIC DIAGRAM ULN2065B : RIN = 350Ω ULN2067B : RIN = 3kΩ ULN2069B : RIN = 2.5kΩ, Rs = 900Ω ULN2071B : RIN = 11.6kΩ, Rs = 3.4kΩ ULN2075B : RIN = 350Ω ULN2077B : RIN = 3kΩ ABSOLUTE MAXIMUM RATINGS Symbol VCEX VCE(sus) Parameter Output Voltage Output Sustaining Voltage Value Unit 80 V 50 V 1.75 A 60 30 15 V V V 25 mA 10 20 V V 4.3 1 W W Operating Ambient Temperature Range – 20 to 85 °C Storage Temperature – 55 to 150 °C IO Output Current Vi Input Voltage II Input Current Vs Supply Voltage Ptot Power Dissipation at Tpins = 90 °C at Tamb = 70 °C Tamb Tstg for ULN2075B – 2077B for ULN2067B – 2071B for ULN2065B – 2069B for ULN2069B for ULN2071B ELECTRICAL CHARACTERISTICS (Tamb = 25oC unless otherwise specified ) Symbol ICEX Parameter Output Leakage Current Test Conditions VCE = 80V Tamb = 25°C Tamb = 70°C VCE(sus) Collector-emitter Sustaining Voltage IC = 100mA, Vi = 0.4V VCE(sat) Collector-emitter Saturation Voltage IC IC IC IC IC Input Current for ULN2065B and ULN2075B Vi = 2.4V Vi = 3.75V for ULN2067B and ULN2077B Vi = 5V Vi = 12V for ULN2069B Vi = 2.75V Vi = 3.75V for ULN2071B Vi = 5V Vi = 12V Ii(on) 2/7 Min. = = = = = 500mA 750mA 1A 1.25A 1.5A IB IB IB IB IB = = = = = Typ. Max. Unit 100 500 µA µA 50 Fig. 1 V 2 1.1 1.2 1.3 1.4 1.5 V V V V V 3 3 3 3 3 1.4 3.3 4.3 9.6 mA mA 4 4 0.6 1.7 1.8 5.2 mA mA 4 4 5.5 10 mA mA 4 4 4 12.5 mA mA 4 4 625µA 935µA 1.25mA 2mA 2.25mA ULN2065B-ULN2067B-ULN2069B-ULN2071B-ULN2075B-ULN2077B ELECTRICAL CHARACTERISTICS (Tamb = 25oC unless otherwise specified ) (continued) Symbol Vi(on) Is Parameter Input Voltage Supply Current for ULN2069B IC = 500mA, Vi = 2.75V for ULN2071B IC = 500mA, Vi = 5V Typ. Max. Unit Fig. 2 6.5 V V 5 5 2.5 10 2.75 5 V V V V 5 5 5 5 6 mA 8 8 4.5 mA 1 µs Turn-off Delay Time 0.5 Vi to 0.5 Vo 1.5 µs Clamp Diode Leakage Current for ULN2065B-ULN2067B and ULN2069B-ULN2071B VR = 80 V Tamb = 25°C Tamb = 70°C Turn-on Delay Time tPHL VF VCE = 2V, IC = 1A ULN2065B, ULN2075B ULN2067B, ULN2077B VCE = 2V, IC = 1.5A ULN2065B, ULN2075B ULN2067B, ULN2077B ULN2069B ULN2071B Min. 0.5 Vi to 0.5 Vo tPLH IR Test Conditions Clamp Diode Forward Voltage for ULN2065B-ULN2067B and ULN2069B-ULN2071B IF = 1 A IF = 1.5 A 6 50 100 µA µA 7 1.75 2 V V Notes : 1. Input voltage is with reference to the substrate (no connection to any other pins) for the ULN2075B and ULN2077B reference is ground for all other types. 2. Input current may be limited by maximum allowable input voltage. TEST CIRCUITS Figure 1. Figure 2. Figure 3. Figure 4. 3/7 ULN2065B-ULN2067B-ULN2069B-ULN2071B-ULN2075B-ULN2077B Figure 5. Figure 6. Figure 7. Figure 8. Figure 9 : Input Current as a Function of Input Voltage. Figure 10 : Input Current as a Function of Input Voltage. Figure 11 : Collector Current as a Function of Input Current. 4/7 ULN2065B-ULN2067B-ULN2069B-ULN2071B-ULN2075B-ULN2077B MOUNTING INSTRUCTIONS The Rth j-amb can be reduced by soldering the GND pins to a suitable copper area of the printed circuit board (Fig. 12) or to an external heatsink (Fig. 13). The diagram of figure 14 shows the maximum dissipable power Ptot and the Rth j-amb as a function of the side "∝" of two equal square copper areas having a thickness of 35 µ (1.4 mils). During soldering the pins temperature must not exceed 260 °C and the soldering time must not be longer than 12 seconds. The external heatsink or printed circuit copper area must be connected to electrical ground. Figure 12 : Example of P.C. Board Area which is Used as Heatsink. Figure 13 : External Heatsink Mounting Example. Figure 14 : Maximum Dissipable Power and Junction to Ambient Thermal Resistance vs. Side "I". Figure 15 : Maximum Allowable Power Dissipation vs. Ambient Temperature. 5/7 ULN2065B-ULN2067B-ULN2069B-ULN2071B-ULN2075B-ULN2077B mm DIM. MIN. a1 0.51 B 0.85 b b1 TYP. inch MAX. MIN. TYP. MAX. 0.020 1.40 0.033 0.50 0.38 0.055 0.020 0.50 D 0.015 0.020 20.0 0.787 E 8.80 0.346 e 2.54 0.100 e3 17.78 0.700 F 7.10 0.280 I 5.10 0.201 L OUTLINE AND MECHANICAL DATA 3.30 0.130 Powerdip 16 Z 6/7 1.27 0.050 ULN2065B-ULN2067B-ULN2069B-ULN2071B-ULN2075B-ULN2077B Information furnished is believed to be accurate and reliable. However, STMicroelectronics assumes no responsibility for the consequences of use of such information nor for any infringement of patents or other rights of third parties which may result from its use. No license is granted by implication or otherwise under any patent or patent rights of STMicroelectronics. Specifications mentioned in this publication are subject to change without notice. This publication supersedes and replaces all information previously supplied. STMicroelectronics products are not authorized for use as critical components in life support devices or systems without express written approval of STMicroelectronics. The ST logo is a registered trademark of STMicroelectronics. All other names are the property of their respective owners © 2003 STMicroelectronics - All rights reserved STMicroelectronics GROUP OF COMPANIES Australia – Belgium - Brazil - Canada - China – Czech Republic - Finland - France - Germany - Hong Kong - India - Israel - Italy - Japan Malaysia - Malta - Morocco - Singapore - Spain - Sweden - Switzerland - United Kingdom - United States www.st.com 7/7