EVERLIGHT UT04-P05

EVERLIGHT ELECTRONICS CO.,LTD.
Technical Data Sheet
High Power LED – 5W
EHP-B03LS/UT04-P05/TR
Features
z Feature of the device: small package with high efficiency
z Typical color temperature: 6500 K.
z View angle: 130°.
z Typical light flux output: 190lm @ 700mA.
z ESD protection.
z Soldering methods: SMT.
z Grouping parameter: total luminous flux, color temperature.
z Typical optical efficiency: 38 lm/W.
z Thermal resistance (junction to lead): 9 K/W.
z The product itself will remain within RoHS compliant version.
Descriptions
z The series are specially designed for applications requiring higher brightness.
z LED should mount onto the Aluminum-cored printed circuit board
z Allowing for cooling.
Applications
z backlighting (illuminated advertising, general lighting)
z reading lamps (aircraft, car, bus)
z indoor and outdoor commercial and residential architectural lighting
z decorative and entertainment lighting
z signal and symbol luminaries for orientation
z indication lights (e.g. steps, exit ways, etc.)
Materials
Items
Description
Housing black body(PCB)
Heat resistant polymer
Reflector
Heat resistant polymer
Heat Sink
Copper
Encapsulating Resin
Silicone resin
Lens
Heat resistant clear silicone
Electrodes
Ag plating copper alloy
Die attach
Silver paste
Chip
InGaN—Blue
Everlight Electronics Co., Ltd.
http://www.everlight.com
Rev. 1.0
Device No. :
Prepared date: 08-20-2007
Prepared by: Brady Chou
Page: 1 of 10
EVERLIGHT ELECTRONICS CO.,LTD.
EHP-B03LS/UT04-P05/TR
Package Outline Dimensions
Notes: 1. Dimensions are in millimeters
2. Tolerances unless dimensions ±0.15mm
Everlight Electronics Co., Ltd.
http://www.everlight.com
Rev. 1.0
Device No. :
Prepared date: 08-20-2007
Prepared by: Brady Chou
Page: 2 of 10
EVERLIGHT ELECTRONICS CO.,LTD.
EHP-B03LS/UT04-P05/TR
Maximum Ratings (T Ambient=25ºC)
Parameter
Symbol
Rating
Unit
Operating Temperature
Topr
-40 ~ +80
ºC
Storage Temperature
Tstg
-40 ~ +100
ºC
Junction Temperature
TJ
125
ºC
Thermal resistance of junction
to heat sink
Rth
11
K/W
Pulse Forward Current
IF
1000
mA
Pulse Power Dissipation
Pd
7.5
W
Electro-Optical Characteristics (T Ambient=25ºC)
Parameter
Bin
Symbol
N1
Luminous Flux(1)
N2
Фv
N3
Min
Typ.
Max
130
----
160
160
----
200
200
----
250
Unit
Condition
lm
IF=700mA
Forward Voltage(2)
Viewing Angle(3)
Color Temperature(4)
----
VF
6.6
----
8.0
V
2θ1/2
----
130
----
deg
CCT
4500
6300
10000
K
Note. 1. Luminous flux measurement tolerance : ±10%
2. Forward Voltage measurement tolerance : ±0.1V
3. 2θ1/2 is the off axis angle from lamp centerline where the luminous intensity is 1/2 of the peak
value.
4. CCT bin refer to document “High Power Illumination emitters labeling and binning” of Everlight.
Everlight Electronics Co., Ltd.
http://www.everlight.com
Rev.1.0
Page: 3 of 10
Device No. :
Prepared date: 08-20-2007
Prepared by: Brady Chou
EVERLIGHT ELECTRONICS CO.,LTD.
EHP-B03LS/UT04-P05/TR
Typical Electro-Optical Curves
Forward Voltage vs Forward current
T Ambient=25ºC
1.0
7.5
0.8
7.0
Forward Voltage(V)
Relative Luminous Intensity
Relative Spectral Distribution
IF=700mA, T Ambient=25ºC
0.6
0.4
0.2
0.0
400
450
500
550
600
650
700
6.5
6.0
5.5
5.0
750
0
200
Wavelength (nm)
600
800
1000
Forward Current(mA)
Relative Luminous Intensity vs Forward current
T Ambient=25ºC
Forward Current Derating Curve,
Derating based on TJMAX=125°C
1.4
800
1.2
700
Forward Current (mA)
Relative Luiminous Intensity
400
1.0
0.8
0.6
0.4
0.2
600
500
400
300
200
100
0.0
0
200
400
600
800
1000
0
0
20
40
60
80
100
Ambient Temperature (οC)
Forward Current(mA)
Everlight Electronics Co., Ltd.
http://www.everlight.com
Rev.1.0
Page: 4 of 10
Device No. :
Prepared date: 08-20-2007
Prepared by: Brady Chou
EVERLIGHT ELECTRONICS CO.,LTD.
EHP-B03LS/UT04-P05/TR
Typical Representative Spatial Radiation Pattern
Relative Luminous Intensity
1.0
0.9
0.8
0.7
0.6
0.5
0.4
0.3
0.2
0.1
0.0
-80
-60
-40
-20
0
20
40
60
80
D egree ( 2 θ )
Everlight Electronics Co., Ltd.
http://www.everlight.com
Rev.1.0
Page: 5 of 10
Device No. :
Prepared date: 08-20-2007
Prepared by: Brady Chou
EVERLIGHT ELECTRONICS CO.,LTD.
EHP-B03LS/UT04-P05/TR
Label explanation
CPN: Customer’s Production Number
P/N : Production Number
QTY: Packing Quantity
CAT: Ranks
HUE: Peak Wavelength
REF: Reference
LOT No: Lot Number
MADE IN TAIWAN: Production Place
Tube Packing Specifications
Reel Dimensions
Everlight Electronics Co., Ltd.
http://www.everlight.com
Rev.1.0
Page: 6 of 10
Device No. :
Prepared date: 08-20-2007
Prepared by: Brady Chou
EVERLIGHT ELECTRONICS CO.,LTD.
EHP-B03LS/UT04-P05/TR
Carrier Tape Dimensions: Loaded quantity 500 PCS per reel.
2
4
11.5
10.4
24.0
16 0
59
Note: 1. Dimensions are in millimeters
2. The tolerances unless mentioned is ±0.1mm
Moisture Resistant Packaging
Label
Aluminum moistue-proof bag
Desiccant
Label
Everlight Electronics Co., Ltd.
http://www.everlight.com
Rev.1.0
Page: 7 of 10
Device No. :
Prepared date: 08-20-2007
Prepared by: Brady Chou
EVERLIGHT ELECTRONICS CO.,LTD.
EHP-B03LS/UT04-P05/TR
Reliability Test Items and Results
Stress Test
Stress Condition
Stress Duration
Solderability
Tsol=230℃, 5sec
1 times
Reflow
Tsol=260℃, 10sec, 6min
3 times
H:+110℃ 20min.
'∫ 20sec.
'L:-40℃
20min.
500 Cycles
Temperature Cycle
H:+100℃ 30min.
'∫ 5min.
'L:- 40℃ 30min.
1000 Cycles
High Temperature/Humidity
Reverse Bias
Ta=85℃ , RH=85%
1000hours
High Temperature Storage
Ta= 110℃
1000hours
Low Temperature Storage
Ta= -40℃
1000hours
Low Temperature Operation
Life
Ta= -40℃, IF=700mA
1000hours
Power Temperature Cycle
H:+85℃ 15min.
'∫ 5min.
'L:- 40℃ 15min.
IF= 225mA, 2min on/off
500cycles
ESD Human Body Model
2000V, Interval:0.5sec
3 times
ESD Machine Model
200V, Interval:0.5sec
3 times
Thermal
Shock
*lm: BRIGHTNESS ATTENUATE DIFFERENCE(1000hrs)<50%
*VF: FORWARD VOLTAGE DIFFERENCE<20%
Everlight Electronics Co., Ltd.
http://www.everlight.com
Rev.1.0
Page: 8 of 10
Device No. :
Prepared date: 08-20-2007
Prepared by: Brady Chou
EVERLIGHT ELECTRONICS CO.,LTD.
EHP-B03LS/UT04-P05/TR
Precautions For Use
1. Over-current-proof
Though EHP-B03 has conducted ESD protection mechanism, customer must not use the device in
reverse and should apply resistors for extra protection. Otherwise slight voltage shift may cause
enormous current change and burn out failure would happen.
2. Storage
i.
Do not open moisture proof bag before the products are ready to use.
ii.
Before opening the package, the LEDs should be kept at 30℃ or less and 90%RH or less.
iii.
The LEDs should be used within a year.
iv.
After opening the package, the LEDs should be kept at 30℃ or less and 70%RH or less.
v.
The LEDs should be used within 168 hours (7 days) after opening the package.
vi.
If the moisture absorbent material (silicone gel) has faded away or the LEDs have exceeded the
storage time, baking treatment should be performed using the following conditions.
vii.
Pre-curing treatment : 60±5℃ for 24 hours.
3. Thermal Management
i.
For maintaining the high flux output and achieving reliability, EHP-A08 series LED package should
be mounted on a metal core printed circuit board (MCPCB) with proper thermal connection to
dissipate approximately 1W of thermal energy under 350mA operation.
ii.
Special thermal designs are also recommended to take in outer heat sink design, such as FR4
PCB on Aluminum with thermal vias or FPC on Aluminum with thermal conductive adhesive, etc.
iii.
Sufficient thermal management must be conducted, or the die junction temperature will be over
the limit under large electronic driving and LED lifetime will decrease critically.
Everlight Electronics Co., Ltd.
http://www.everlight.com
Rev.1.0
Page: 9 of 10
Device No. :
Prepared date: 08-20-2007
Prepared by: Brady Chou
EVERLIGHT ELECTRONICS CO.,LTD.
EHP-B03LS/UT04-P05/TR
4. Soldering Condition
i.
Lead reflow soldering temperature profile
ii.
Reflow soldering should not be done more than two times.
iii.
While soldering, do not put stress on the LEDs during heating.
iv.
After soldering, do not warp the circuit board
5. Soldering Iron
i.
For prototype builds or small series production runs it is possible to place and solder the LED by
hand.
ii.
Dispensing thermal conductive glue or grease on the substrates and follow its curing spec. Press
LED housing to closely connect LED and substrate.
iii.
It is recommended to hand solder the leads with a solder tip temperature of 280°C for less than 3
seconds within once in less than the soldering iron capacity 25W. Leave two seconds and more
intervals, and do soldering of each terminal.
iv.
Be careful because the damage of the product is often started at the time of the hand solder.
Everlight Electronics Co., Ltd.
http://www.everlight.com
Rev.1.0
Page: 10 of 10
Device No. :
Prepared date: 08-20-2007
Prepared by: Brady Chou