MODULES 375V 2nd Generation 5 0 - 6 0 0 W AT T S P C B M O U N T I N G C O M P O N E N T S Features • • • • • Input Voltage: 250-425Vdc Output Voltage: 2-48Vdc Output Power (per module):Maxi: 600W Mini: 300W Micro: 150W Efficiency: Up to 90% Agency Approvals: UL, CSA, TUV, VDE, BABT, CE Marked, C-Tick Specifications Selection Table GENERAL OUTPUT VOLTAGE (VDC) Units Notes Set point accuracy ±1% Vout nom. Line regulation ±0.02% Vout nom. Nominal input;full load; 25°C Low line to high line; full load No load to full load; nominal input -20°C to 100°C Load regulation Temperature regulation ±0.02% Vout nom. ±0.002% Vout/°C MINI 100 MICRO 50 3.3V 264 150 75 5V 400 200 100 12V 600 300 150 15V 600 300 150 24V 600 300 150 28V 600 300 150 48V 600 300 150 100mV Remote sense compensation 0.5 Volts Product Grade Specifications Overvoltage set point 115% Vout nom. E C T H M Operating Temp. (°C) -10 to 100 -20 to 100 -40 to 100 -40 to 100 -55 to 100 Current limit 115% out max. Vout 95% of nominal Storage Temp. (°C) -20 to 125 -40 to 125 -40 to 125 -55 to 125 -65 to 125 Efficiency: 5Vout 83% Nominal input; 80% load; 25°C Nominal input; 80% load; 25°C Temp. Cycling 88% Programming range 10-110% Vout nom. Short circuit current 115% out max. Output Voltage <250mV Isolation voltage 3000Vrms Input to Output (typical unless otherwise noted) STANDARDS AND APPROVALS C-Tick AS/NZS CISPR11 Group 1 Class A Part Numbering 375 236 2V Ripple and noise, p-p 24Vout Full load, 20MHz bandwidth OUTPUT POWER (W) MAXI 160 none none none (°C) 24 hours 24 hours (-55 to 125) (-65 to 125) Burn-In none none none 12 hours Low Temp.Test (°C) none none none -40°C -55°C High Temp.Test (°C) none none none 100°C 100°C Final Test Data none none none Mechanical Drawings refer to page 237-238 Other O/P voltages consult sales 24 hours