FUJITSU MEDIA DEVICE DATA SHEET DS04-21716-1E ASSP for Mobile Telephone VCO (230 to 2300 MHz) VC-50 Series ■ DESCRIPTION With excellent C/N characteristics and low current consumption, this VCO series is ideal for CDMA, PCS, PHS and GSM mobile communication equipment. The VC-50 series can be used in any frequency band in the 230MHz to 2300MHz range. The device utilizes FUJITSU MEDIA DEVICE’s high-frequency design technology, high-density mounting technology, and frequency adjustment technology to provide a high level of reliability in addition to high performance and small size. ■ FEATURES • Superior noise characteristics (C/N, S/N) • High level of stability in response to ambient temperature and load variations • FUJITSU MEDIA DEVICE’s proprietary fabrication process provides the uniformity of the central frequency distribution • Small size, light-weight, slim-package : 6.0 × 6.0 × 1.8 mm (Typ.) • SMD-type taping specifications suitable for automatic mounting and reflow soldering ■ PACKAGE VC-50 Series ■ PIN ASSIGNMENT (TOP VIEW) 7 6 5 8 4 1 2 3 ■ PIN DESCRIPTION 2 Pin No. Symbol Description 1 Vt 2 GND 3 VCC 4 GND GND 5 OUT Output 6 GND GND 7 GND GND 8 GND GND Control voltage GND Power supply voltage VC-50 Series ■ PRODUCT LINEUP (STANDARD MODELS) Center Frequency (MHz) Band Width (MHz) Power Supply Voltage (V) Part Number 967 ±13 3.0 ± 0.25 VC-3R0A50-0967A 991 ±13 2.5 ± 0.15 VC-2R5A50-0991 1035 ±15.5 2.55 ± 0.15 VC-2R5A50-1035 PCS 1750 ±30 3.0 ± 0.16 VC-3R0A50-1750 K-PCS 1635 ±15 2.7 ± 0.15 VC-2R7A50-1635 ±15 3.0 ± 0.15 VC-3R0A50-1635S 897 ±17.5 2.8 ± 0.1 VC-2R8A50-0897F 1171 ±35 2.8 ± 0.07 VC-2R8A50-1171 1360 ±80 2.85 ± 0.15 VC-2R8A50-1360 1652 ±20 2.7 ± 0.1 VC-2R7A50-1652 1668 ±18.3 3.0 ± 0.2 VC-3R0A50-1668N System CDMA GSM GSM/DCS PHS 3 VC-50 Series ■ ELECTRICAL CHARACTERISTICS 1. For CDMA (Part number : VC-3RA50-0967A) • Absolute Maximum Ratings Parameter Symbol Rating Min. Max. Unit Input DC voltage VCC +3.25 V Control voltage Vt +3.25 V Operating temperature Ta −30 +80 °C Storage temperature Tstg −40 +85 °C Storage humidity Hstg 5 95 % WARNING: VCO can be permanently damaged by application of stress (voltage, temperature, humidity, etc.) in excess of absolute maximum ratings. Do not exceed these ratings. • Electrical Characteristics Parameter Current consumption Symbol Conditions Value Min. Typ. Max. Unit ICC VCC = 3.0 V, Vt = 1.7 V 6.4* mA Frequency fmin VCC = 3.0 V, Vt = 0.7 V 954.0* MHz Frequency fmax VCC = 3.0 V, Vt = 2.7 V 980.0* MHz Control voltage sensitivity kv (fmax − fmin) /2.0 18.0 23.0 28.0 MHz/V Oscillator output Po VCC = 3.0 V, Vt = 1.7 V −6.0* 1.0* dBm VCC = 3.0 V, Vt = 1.7 V, Offset = 1 kHz, BW = 1 Hz 70.0* dBc/Hz VCC = 3.0 V, Vt = 1.7 V, Offset = 10 kHz, BW = 1 Hz 100.0* dBc/Hz VCC = 3.0 V, Vt = 1.7 V, Offset = 30 kHz, BW = 1 Hz 110.0* dBc/Hz VCC = 3.0 V, Vt = 1.7 V, Offset = 60 kHz, BW = 1 Hz 115.0* dBc/Hz C/N C/N Higher harmonics Hs VCC = 3.0 V, Vt = 1.7 V, 2nd, 3rd −10.0* dBc Spurious SP VCC = 3.0 V, Vt = 1.7 V −70.0* dBc VCC = 3.0 V ± 0.25 V, Vt = 1.7 V ±800* kHz Power supply variation Push Load variation Pull VCC = 3.0 V, Vt = 1.7 V, VSWR = 2 ALL PHASE ±1000 kHz Temperature drift Td Ta = +25 °C ± 55 °C ±3000* kHz * : Ta = −30°C to +80°C 4 (Ta = +25°C ± 3°C) VC-50 Series 2. For CDMA (Part number : VC-2R5A50-0991) • Absolute Maximum Ratings Parameter Symbol Rating Min. Max. Unit Input DC voltage VCC +6.0 V Control voltage Vt +10.0 V Operating temperature Ta −40 +85 °C Storage temperature Tstg −50 +125 °C Storage humidity Hstg 5 95 % WARNING: VCO can be permanently damaged by application of stress (voltage, temperature, humidity, etc.) in excess of absolute maximum ratings. Do not exceed these ratings. • Electrical Characteristics Parameter Symbol (Ta = −40°C to +85°C) Conditions Value Min. Typ. Max. Unit ICC VCC = 2.5 V , Vt = 1.4 V 8.0 7.0* mA Frequency fmin VCC = 2.5 V, Vt = 0.6 V 978.0 MHz Frequency fmax VCC = 2.5 V, Vt = 2.2 V 1004.0 MHz Current consumption Control voltage sensitivity kv (fmax − fmin) /1.6 23.0 27.0 31.0 MHz/V Oscillator output Po VCC = 2.5 V, Vt = 1.4 V −4.5 −1.5 1.5 dBm VCC = 2.5 V, Vt = 1.4 V, Offset = 20 kHz, BW = 1 Hz 107.0 108.0* dBc/Hz VCC = 2.5 V, Vt = 1.4 V, Offset = 25 kHz, BW = 1 Hz 110.0 111.0* dBc/Hz VCC = 2.5 V, Vt = 1.4 V, Offset = 60 kHz, BW = 1 Hz 118.0 dBc/Hz VCC = 2.5 V, Vt = 1.4 V, Offset = 900 kHz, BW = 1 Hz 140.0 dBc/Hz C/N C/N Higher harmonics Hs VCC = 2.5 V, Vt = 1.4 V, Up to 3rd −15.0 dBc Spurious SP VCC = 2.5 V, Vt = 1.4 V, Up to 3 GHz −70.0 dBc VCC = 2.5 V ± 0.15 V, Vt = 1.4 V ±500 kHz VCC = 2.5 V, Vt = 1.4 V, VSWR = 2 ALL PHASE ±500 kHz Power supply variation Push Load variation Pull * : Ta = +25 °C ± 3°C 5 VC-50 Series 3. For CDMA (Part number : VC-2R5A50-1035) • Absolute Maximum Ratings Parameter Symbol Rating Min. Max. Unit Input DC voltage VCC +6.0 V Control voltage Vt +10.0 V Operating temperature Ta −40 +85 °C Storage temperature Tstg −50 +125 °C Storage humidity Hstg 5 95 % WARNING: VCO can be permanently damaged by application of stress (voltage, temperature, humidity, etc.) in excess of absolute maximum ratings. Do not exceed these ratings. • Electrical Characteristics Parameter Current consumption Conditions Value Min. Typ. Max. Unit ICC VCC = 2.55 V, Vt = 1.35 V 10.0 mA Frequency fmin VCC = 2.55 V, Vt = 0.5 V 1019.0 MHz Frequency fmax VCC = 2.55 V, Vt = 2.2 V 1050.0 MHz Control voltage sensitivity kv (fmax − fmin) /1.7, Vt = 1.35 V 24.0 28.0 32.0 MHz/V Oscillator output Po VCC = 2.55 V, Vt = 1.35 V −3.0 0.0 3.0 dBm VCC = 2.55 V, Vt = 1.35 V, Offset = 625 kHz , BW = 1 Hz 137.0 dBc/Hz VCC = 2.55 V, Vt = 1.35 V, Offset = 1.25 MHz , BW = 1 Hz 143.0 dBc/Hz C/N 6 Symbol (Ta = −40°C to +85°C) C/N Higher harmonics Hs VCC = 2.55 V, Vt = 1.35 V, 2nd, 3rd, 4th −15.0 dBc Spurious SP VCC = 2.55 V, Vt = 1.35 V, Up to 3 GHz −70.0 dBc VCC = 2.55 V ± 0.15 V, Vt = 1.35 V ±500 kHz VCC = 2.55 V, Vt = 1.35 V, VSWR = 2 ALL PHASE ±500 kHz Power supply variation Push Load variation Pull VC-50 Series 4. For PCS (Part number : VC-3R0A50-1750) • Absolute Maximum Ratings Parameter Symbol Rating Min. Max. Unit Input DC voltage VCC +3.2 V Control voltage Vt +3.2 V Operating temperature Ta −30 +80 °C Storage temperature Tstg −35 +85 °C Storage humidity Hstg 5 95 % WARNING: VCO can be permanently damaged by application of stress (voltage, temperature, humidity, etc.) in excess of absolute maximum ratings. Do not exceed these ratings. • Electrical Characteristics Parameter Current consumption Symbol (Ta = −30°C to +80°C) Conditions Value Min. Typ. Max. Unit ICC VCC = 3.0 V, Vt = 1.65 V 8.5 mA Frequency fmin VCC = 3.0 V, Vt = 0.3 V 1720.0 MHz Frequency fmax VCC = 3.0 V, Vt = 3.0 V 1780.0 MHz Control voltage sensitivity kv (fmax − fmin) /2.7 30.0 40.0 50.0 MHz/V Oscillator output Po VCC = 3.0 V, Vt = 1.65 V −3.0 0.0 3.0 dBm C/N C/N VCC = 3.0 V, Vt = 1.65 V, Offset = 100 kHz , BW = 1 Hz 112.0 dBc/Hz Higher harmonics Hs VCC = 3.0 V, Vt = 1.65 V, Up to 3rd −10.0 dBc Spurious SP VCC = 3.0 V, Vt = 1.65 V −80.0 dBc VCC = 3.0 V ± 0.16 V, Vt = 1.65 V ±600 kHz Power supply variation Push Load variation Pull VCC = 3.0 V, Vt = 1.65 V, VSWR = 2 ALL PHASE ±1200 kHz Temperature drift Td Ta = +25 °C ± 55 °C ±6000 kHz 7 VC-50 Series 5. For K-PCS (Part number : VC-2R7A50-1635) • Absolute Maximum Ratings Parameter Symbol Rating Min. Max. Unit Input DC voltage VCC +3.0 V Operating temperature Ta −30 +80 °C Storage temperature Tstg −40 +90 °C Storage humidity Hstg 5 95 % WARNING: VCO can be permanently damaged by application of stress (voltage, temperature, humidity, etc.) in excess of absolute maximum ratings. Do not exceed these ratings. • Electrical Characteristics Parameter Current consumption Symbol ICC Conditions Value Unit Min. Typ. Max. VCC = 2.7 V, Vt = 0.5 V to 2.5 V 8.5* mA Frequency fmin VCC = 2.7 V, Vt = 0.5 V 1620.0* MHz Frequency fmax VCC = 2.7 V, Vt = 2.5 V 1650.0* MHz Control voltage sensitivity kv (fmax − fmin) /2.0 22.0 MHz/V Oscillator output Po VCC = 2.7 V, Vt = 1.5 V −3.0 dBm VCC = 2.7 V, Vt = 1.5 V, Offset = 1 kHz, BW = 1 Hz 70.0 dBc/Hz VCC = 2.7 V, Vt = 1.5 V, Offset = 100 kHz, BW = 1 Hz 111.0 dBc/Hz VCC = 2.7 V, Vt = 1.5 V, Offset = 1.25 MHz, BW = 1 Hz 134.0 dBc/Hz VCC = 2.7 V, Vt = 1.5 V, 2nd, 3rd −10.0 dBc VCC = 2.7 V ± 0.15 V, Vt = 1.5 V ±800 kHz VCC = 2.7 V, Vt = 1.5 V, VSWR = 2 ALL PHASE ±1500 kHz C/N Higher harmonics C/N Hs Power supply variation Push Load variation Pull * : Ta = −30°C to +80°C 8 (Ta = +25°C ± 3°C) VC-50 Series 6. For K-PCS (Part number : VC-3R0A50-1635S) • Absolute Maximum Ratings Parameter Symbol Rating Min. Max. Unit Input DC voltage VCC +6.0 V Control voltage Vt +6.0 V Operating temperature Ta −30 +80 °C Storage temperature Tstg −40 +90 °C Storage humidity Hstg 5 95 % WARNING: VCO can be permanently damaged by application of stress (voltage, temperature, humidity, etc.) in excess of absolute maximum ratings. Do not exceed these ratings. • Electrical Characteristics Parameter Current consumption Symbol (Ta = +25°C ± 3°C) Conditions Value Min. Typ. Max. Unit ICC VCC = 3.0 V, Vt = 1.5 V 8.5 mA Frequency fmin VCC = 3.0 V, Vt = 0.5 V 1620.0 MHz Frequency fmax VCC = 3.0 V, Vt = 2.5 V 1650.0 MHz Control voltage sensitivity kv (fmax − fmin) /2.0 22.0 MHz/V Oscillator output Po VCC = 3.0 V, Vt = 1.5 V −3.0 dBm VCC = 3.0 V, Vt = 1.5 V, Offset = 1 kHz, BW = 1 Hz 70.0* dBc/Hz VCC = 3.0 V, Vt = 1.5 V, Offset = 100 kHz, BW = 1 Hz 111.0* dBc/Hz VCC = 3.0 V, Vt = 1.5 V, Offset = 1.25 MHz, BW = 1 Hz 134.0* dBc/Hz C/N C/N Higher harmonics Hs VCC = 3.0 V, Vt = 1.5 V, 2nd, 3rd −10.0 dBc Spurious SP VCC = 3.0 V, Vt = 1.5 V −70.0* dBc VCC = 3.0 V ± 0.15 V, Vt = 1.5 V ±500 kHz Power supply variation Push Load variation Pull VCC = 3.0 V, Vt = 1.5 V, VSWR = 2 ALL PHASE ±1000 kHz Temperature drift Td Ta = +25 °C ± 55 °C ±3000* kHz * : Ta = −30°C to +80°C 9 VC-50 Series 7. For GSM (Part number : VC-2R8A50-0897F) • Absolute Maximum Ratings Parameter Symbol Rating Min. Max. Unit Input DC voltage VCC +4.0 V Control voltage Vt 0 +2.9 V Operating temperature Ta −20 +75 °C Storage temperature Tstg −40 +85 °C Storage humidity Hstg 5 95 % WARNING: VCO can be permanently damaged by application of stress (voltage, temperature, humidity, etc.) in excess of absolute maximum ratings. Do not exceed these ratings. • Electrical Characteristics Parameter Current consumption Symbol Conditions Value Min. Typ. Max. Unit ICC VCC = 2.8 V, Vt = 1.2 V 25.0* mA Frequency fmin VCC = 2.8 V, Vt = 0.5 V 880.0* MHz Frequency fmax VCC = 2.8 V, Vt = 1.9 V 915.0* MHz Control voltage sensitivity kv (fmax − fmin) /1.4 24.0 36.0 MHz/V Oscillator output Po VCC = 2.8 V, Vt = 1.2 V 2.0 dBm VCC = 2.8 V, Vt = 1.2 V, Offset = 100 kHz, BW = 1 Hz 100.0 dBc/Hz VCC = 2.8 V, Vt = 1.2 V, Offset = 400 kHz, BW = 1 Hz 125.0 dBc/Hz VCC = 2.8 V, Vt = 1.2 V, Offset = 20 MHz, BW = 1 Hz 165.0 dBc/Hz VCC = 2.8 V, Vt = 1.2 V, 2nd, 3rd −15.0 dBc VCC = 2.8 V ± 0.1 V, Vt = 1.2 V ±1000 kHz C/N Higher harmonics C/N Hs Power supply variation Push Load variation Pull VCC = 2.8 V, Vt = 1.2 V, VSWR = 2 ALL PHASE ±2000 kHz Temperature drift Td Ta = +25 (+50/−45) °C ±2000* kHz * : Ta = −20°C to +75°C 10 (Ta = +25°C ± 3°C) VC-50 Series 8. For GSM (Part number : VC-2R8A50-1171) • Absolute Maximum Ratings Parameter Symbol Rating Min. Max. Unit Input DC voltage VCC −0.3 +2.9 V Control voltage Vt 0 +2.9 V Operating temperature Ta −20 +75 °C Storage temperature Tstg −30 +85 °C Storage humidity Hstg 5 95 % WARNING: VCO can be permanently damaged by application of stress (voltage, temperature, humidity, etc.) in excess of absolute maximum ratings. Do not exceed these ratings. • Electrical Characteristics Parameter Current consumption Symbol (Ta = +25°C ± 3°C) Conditions Value Min. Typ. Max. Unit ICC VCC = 2.8 V, Vt = 1.425 V 8.0* mA Frequency fmin VCC = 2.8 V, Vt = 0.85 V 1136.0* MHz Frequency fmax VCC = 2.8 V, Vt = 2.0 V 1206.0* MHz Control voltage sensitivity kv (fmax − fmin) /1.15 70.0* 90.0* MHz/V Oscillator output Po VCC = 2.8 V, Vt = 1.425 V −5.0* +1.0* dBm VCC = 2.8 V, Vt = 1.425 V, Offset = 10 kHz, BW = 1 Hz 85.0* dBc/Hz VCC = 2.8 V, Vt = 1.425 V, Offset = 400 kHz, BW = 1 Hz 117.0* dBc/Hz VCC = 2.8 V, Vt = 1.425 V, Offset = 600 kHz, BW = 1 Hz 122.0* dBc/Hz VCC = 2.8 V, Vt = 1.425 V, Offset = 1.6 MHz, BW = 1 Hz 132.0* dBc/Hz VCC = 2.8 V, Vt = 1.425 V, Offset = 3 MHz, BW = 1 Hz 142.0* dBc/Hz VCC = 2.8 V, Vt = 1.425 V, Offset = 10 MHz, BW = 1 Hz 147.0* dBc/Hz VCC = 2.8 V, Vt = 1.425 V, 2nd, 3rd −10.0* dBc VCC = 2.8 V ± 0.07 V, Vt = 1.425 V ±500* kHz C/N Higher harmonics C/N Hs Power supply variation Push Load variation Pull VCC = 2.8 V, Vt = 1.425 V, VSWR = 2 ALL PHASE ±1000* kHz Temperature drift Td Ta = +25 (+50/−45) °C ±3000* kHz * : Ta = −20°C to +75°C 11 VC-50 Series 9. For GSM (Part number : VC-2R8A50-1360) • Absolute Maximum Ratings Parameter Symbol Rating Min. Max. Unit Input DC voltage VCC +3.0 V Control voltage Vt +3.0 V Operating temperature Ta −20 +80 °C Storage temperature Tstg −30 +80 °C Storage humidity Hstg 5 95 % WARNING: VCO can be permanently damaged by application of stress (voltage, temperature, humidity, etc.) in excess of absolute maximum ratings. Do not exceed these ratings. • Electrical Characteristics Parameter Current consumption Conditions Value Min. Typ. Max. Unit ICC VCC = 2.85 V, Vt = 1.3 V 9.0 mA Frequency fmin VCC = 2.85 V, Vt = 0.3 V 1280.0 MHz Frequency fmax VCC = 2.85 V, Vt = 2.3 V 1440.0 MHz Control voltage sensitivity kv (fmax − fmin) /2.0 86.0 106.0 MHz/V Oscillator output Po VCC = 2.85 V, Vt = 1.3 V −3.0 dBm VCC = 2.85 V, Vt = 1.3 V, Offset = 10 kHz, BW = 1 Hz 94.0 dBc/Hz VCC = 2.85 V, Vt = 1.3 V, Offset = 3 MHz, BW = 1 Hz 145.0 dBc/Hz VCC = 2.85 V, Vt = 1.3 V, 2nd, 3rd −10.0 dBc VCC = 2.85 V ± 0.15 V, Vt = 1.3 V ±1000 kHz C/N Higher harmonics 12 Symbol (Ta = +25°C ± 3°C) C/N Hs Power supply variation Push Load variation Pull VCC = 2.85 V, Vt = 1.3 V, VSWR = 2 ALL PHASE ±2000 kHz Temperature drift Td Ta = +25 (+55/−45) °C ±3000 kHz VC-50 Series 10. For PHS (Part number : VC-2R7A50-1652) • Absolute Maximum Ratings Parameter Symbol Rating Min. Max. Unit Input DC voltage VCC +5.0 V Control voltage Vt +5.0 V Operating temperature Ta −20 +60 °C Storage temperature Tstg −35 +85 °C Storage humidity Hstg 5 95 % WARNING: VCO can be permanently damaged by application of stress (voltage, temperature, humidity, etc.) in excess of absolute maximum ratings. Do not exceed these ratings. • Electrical Characteristics Parameter Current consumption Symbol ICC (Ta = +25°C ± 3°C) Conditions Value Unit Min. Typ. Max. VCC = 2.7 V, Vt = 0.4 V to 2.1 V 5.5* mA Frequency fmin VCC = 2.7 V, Vt = 0.4 V 1632.5* MHz Frequency fmax VCC = 2.7 V, Vt = 2.1 V 1672.5* MHz (fmax − fmin) /1.7 36.0 48.0 MHz/V VCC = 2.7 V, Vt = 0.4 V to 2.1 V −6.0* dBm VCC = 2.7 V, Vt = 0.0 V to 2.7 V −10.0* dBm Control voltage sensitivity kv Oscillator output Po C/N C/N VCC = 2.7 V, Vt = 0.4 V to 2.1 V, Offset = 100 kHz, BW = 1 Hz 109.0* dBc/Hz Higher harmonics Hs VCC = 2.7 V, Vt = 0.4 V to 2.1 V, 2nd, 3rd −15.0* dBc VCC = 2.7 V ± 0.1 V, Vt = 0.4 V to 2.1 V ±600 kHz Power supply variation Push Load variation Pull VCC = 2.7 V, Vt = 0.4 V to 2.1 V, VSWR = 2 ALL PHASE ±1000 kHz Temperature drift Td Ta = +25 (+45/−35) °C ±3000 kHz * : Ta = −20°C to +60°C 13 VC-50 Series 11. For PHS (Part number : VC-3R0A50-1668N) • Absolute Maximum Ratings Parameter Symbol Rating Min. Max. Unit Input DC voltage VCC +3.2 V Operating temperature Ta −10 +60 °C Storage temperature Tstg −30 +85 °C Storage humidity Hstg 5 85 % WARNING: VCO can be permanently damaged by application of stress (voltage, temperature, humidity, etc.) in excess of absolute maximum ratings. Do not exceed these ratings. • Electrical Characteristics Parameter Current consumption Symbol Conditions Value Min. Typ. Max. Unit ICC VCC = 3.0 V, Vt = 1.5 V 7.0* mA Frequency fmin VCC = 3.0 V, Vt = 0.5 V 1649.7* MHz Frequency fmax VCC = 3.0 V, Vt = 2.5 V 1686.3* MHz Control voltage sensitivity kv (fmax − fmin) /2.0 25.0 31.0 37.0 MHz/V Oscillator output Po VCC = 3.0 V, Vt = 1.5 V −6.0* dBm C/N C/N VCC = 3.0 V, Vt = 1.5 V, Offset = 100 kHz, BW = 1 Hz 110.0* dBc/Hz Higher harmonics Hs VCC = 3.0 V, Vt = 1.5 V, Up to 3rd −15.0 dBc VCC = 3.0 V ± 0.2 V, Vt = 1.5 V ±800 kHz Power supply variation Push Load variation Pull VCC = 3.0 V, Vt = 1.5 V, VSWR = 2 ALL PHASE ±1000 kHz Temperature drift Td Ta = +25°C ± 35°C ±4000* kHz * : Ta = −10°C to +60°C 14 (Ta = +25°C ± 3°C) VC-50 Series ■ MARKING 7 6 5 Part symbol 8 Lot number 4 Trimming window Logo Index 1 2 3 ■ PART NUMBER DESIGNATION VC − 2R7 A 50 − 1750 A Numbers Specified by FUJITSU MEDIA DEVICE Center Frequency : 1750 MHz Series Name : VC-50 Series Outer Sheath Type : SMD Power Supply Voltage : 2.7 V Product Category : VCO 15 VC-50 Series ■ PACKAGE DIMENSION +0.4 6.0 −0.2 5.0 3 8 7 4 6 5.0 2 1.9 6.0 ± 0.2 1 1.0 1.9 4.0 1.8 ± 0.2 5 1.0 Dimensions in mm ■ RECOMMENDED PATTERN FOR SOLDERING 5.1 6.4 4.8 2.0 1.3 1.3 2.0 4.8 6.4 Dimensions in mm Dimension tolerance : ± 0.1 mm 16 VC-50 Series ■ TAPING AND PACKAGING (1) Carrier Tape and Packaging +0.1 φ1.5 −0 6.5 ± 0.1 2.2 ± 0.1 12.0 ± 0.3 4.0 ± 0.1 5.5 ± 0.1 1.75 ± 0.1 2.0 ± 0.05 +0.1 φ1.5 −0 8.0 ± 0.1 0.3 ± 0.05 6.5 ± 0.1 Dimensions in mm (2) Taping Layout Feeder 150 mm ∼ 360 mm Reel side Empty 50 mm or more Direction of pulling Marking of pin 1 2000 packages Rulling side Empty 400 mm or more 17 VC-50 Series Label 13.0 ± 0.3 21.0 ± 0.5 80.0 ± 0.5 330.0 ± 0.1 (3) Reel Shape and Dimensions 2.8 ± 0.5 +2.0 14.0 −0 Note : The label specifies the part number, quantity, and lot number. Volume : 2000 pcs/reel Type : (L) 340 × (W) 340 × (t) 30 (mm) Dimensions in mm 18 VC-50 Series ■ REFLOW MOUNTING CONDITIONS (RECOMMENDED) • Perform mounting using the temperature profile shown below. To prevent thermal stress to the VCO, ensure gentle temperature gradients and use preheating whenever possible. (Recommended preheating: 140°C to 160°C for 60 s ± 20 s) • Always consult FUJITSU MEDIA DEVICE beforehand if mounting more than once. • Never remove a VCO that has already been mounted and attempt to reuse. • For mounting, use a general-purpose flux suitable for mounting electronic components. 7 s Max. 250 230 ± 10 ∗2 Temperature (°C) 200 ∗1 20 s ∼ 30 s 160 150 140 60 s ± 20 s 100 50 Warm-up Pre-heating Heating Cooling 0 Time (s) ∗1 : 10 °C/s or less ∗2 : 8 °C/s or less ■ WASHING CONDITIONS • Washing solution: Use isopropyl alcohol. • Washing procedure: Immersion or steam cleaning is recommended. • Washing time: For immersion: Less than 5 minutes at 40°C or less. For steam: Less than 2 minutes at 90°C or less is recommended. 19 VC-50 Series FUJITSU MEDIA DEVICES LIMITED For further information please contact: Japan FUJITSU MEDIA DEVICE LIMITED International Sales & Marketing DEPT. Shin-Yokohama Square Bldg.,14F, Shin-yokohama 2-3-12, Kohoku-ku, Yokohama, Kanagawa 222-0033, Japan Tel: +81-45-471-0061 Fax: +81-45-471-0076 http://www.fujitsu.co.jp/hypertext/fmd/English/index.html All Rights Reserved. The contents of this document are subject to change without notice. Customers are advised to consult with FUJITSU sales representatives before ordering. The information and circuit diagrams in this document are presented as examples of semiconductor device applications, and are not intended to be incorporated in devices for actual use. Also, FUJITSU is unable to assume responsibility for infringement of any patent rights or other rights of third parties arising from the use of this information or circuit diagrams. North and South America FUJITSU MICROELECTRONICS, INC. 3545 North First Street, San Jose, CA 95134-1804, U.S.A. Tel: +1-408-922-9000 Fax: +1-408-922-9179 Customer Response Center Mon. - Fri.: 7 am - 5 pm (PST) Tel: +1-800-866-8608 Fax: +1-408-922-9179 http://www.fujitsumicro.com/ Europe FUJITSU MICROELECTRONICS EUROPE GmbH Am Siebenstein 6-10, D-63303 Dreieich-Buchschlag, Germany Tel: +49-6103-690-0 Fax: +49-6103-690-122 http://www.fujitsu-fme.com/ Asia Pacific FUJITSU MICROELECTRONICS ASIA PTE. LTD. #05-08, 151 Lorong Chuan, New Tech Park, Singapore 556741 Tel: +65-281-0770 Fax: +65-281-0220 http://www.fmap.com.sg/ F0101 FUJITSU LIMITED Printed in Japan The contents of this document may not be reproduced or copied without the permission of FUJITSU LIMITED. FUJITSU semiconductor devices are intended for use in standard applications (computers, office automation and other office equipments, industrial, communications, and measurement equipments, personal or household devices, etc.). CAUTION: Customers considering the use of our products in special applications where failure or abnormal operation may directly affect human lives or cause physical injury or property damage, or where extremely high levels of reliability are demanded (such as aerospace systems, atomic energy controls, sea floor repeaters, vehicle operating controls, medical devices for life support, etc.) are requested to consult with FUJITSU sales representatives before such use. The company will not be responsible for damages arising from such use without prior approval. Any semiconductor devices have inherently a certain rate of failure. You must protect against injury, damage or loss from such failures by incorporating safety design measures into your facility and equipment such as redundancy, fire protection, and prevention of over-current levels and other abnormal operating conditions. If any products described in this document represent goods or technologies subject to certain restrictions on export under the Foreign Exchange and Foreign Trade Control Law of Japan, the prior authorization by Japanese government should be required for export of those products from Japan.