Bulletin PD-21111 12/05 403CNQ100PbF SCHOTTKY RECTIFIER 400 Amp LUG TERMINAL ANODE 1 LUG TERMINAL ANODE 2 BASE COMMON CATHODE Major Ratings and Characteristics Characteristics Description/ Features Values Units IF(AV) Rectangular 400 A VRRM 100 V 25,500 A 0.69 V - 55 to 175 °C waveform IFSM @ tp = 5 µs sine VF @ 200Apk, TJ=125°C TJ (per leg) range The 403CNQ.. center tap Schottky rectifier module series has been optimized for low reverse leakage at high temperature. The proprietary barrier technology allows for reliable operation up to 175 °C junction temperature. Typical applications are in high current switching power supplies, plating power supplies, UPS systems, converters, free-wheeling diodes, welding, and reverse battery protection. 175°C TJ operation Center tap module Low forward voltage drop High frequency operation Guard ring for enhanced ruggedness and long term reliability Lead-Free Case Styles TO-244 www.irf.com 1 403CNQ100PbF Bulletin PD-21111 12/05 Voltage Ratings Part number VR 403CNQ100PbF Max. DC Reverse Voltage (V) 100 VRWM Max. Working Peak Reverse Voltage (V) Absolute Maximum Ratings Parameters IF(AV) IFSM EAS 403CNQ Units Conditions Max. Average Forward Per Device 400 Current * See Fig. 5 Per Leg 200 Max. Peak One Cycle Non-Repetitive 25,500 Surge Current (Per Leg) * See Fig. 7 3300 Non-Repetitive Avalanche Energy A A 15 mJ 1 A 50% duty cycle @ TC = 141 °C, rectangular wave form Following any rated load condition and with 10ms Sine or 6ms Rect. pulse rated VRRM applied 5µs Sine or 3µs Rect. pulse TJ = 25 °C, IAS = 13 Amps, L = 0.2 mH (Per Leg) IAR Repetitive Avalanche Current (Per Leg) Current decaying linearly to zero in 1 µsec Frequency limited by TJ max. VA = 1.5 x VR typical Electrical Specifications Parameters VFM IRM 403CNQ Units Conditions Max. Forward Voltage Drop (Per Leg) * See Fig. 1 (1) 0.84 1.07 V V @ 200A @ 400A 0.69 V @ 200A 0.82 V @ 400A Max. Reverse Leakage Current 6 mA TJ = 25 °C (Per Leg) * See Fig. 2 80 mA TJ = 125 °C (1) TJ = 25 °C TJ = TJ max. VR = rated V R CT Max. Junction Capacitance (Per Leg) 5500 pF VR = 5VDC (test signal range 100Khz to 1Mhz) 25°C LS Typical Series Inductance (Per Leg) 5.0 nH From top of terminal hole to mounting plane 10000 V/ µs dv/dt Max. Voltage Rate of Change (Rated VR) (1) Pulse Width < 300µs, Duty Cycle <2% Thermal - Mechanical Characteristics 2 Parameters Min Typ Max Units TJ Max. Junction Temperature Range - 55 - 175 °C TStg Max. Storage Temperature Range - 55 - 175 RthJC Thermal Resistance, Junction to Case Per Leg - - 0.19 °C/W Thermal Resistance, Junction to Case Per Module K/W RthCS Thermal Resistance, Case to Heatsink - - 0.095 - 0.10 - Wt Weight - 68 (2.4) - g (oz) T Mounting Torque 35.4 (4) - 53.1 (6) lbf*in Mounting Torque Center Hole 30 (3.4) - 40 (4.6) (Nm) Terminal Torque 30 (3.4) - 44.2 (5) Vertical Pull - - 80 2 inch Lever Pull - - 35 lbf.in www.irf.com 403CNQ100PbF Bulletin PD-21111 12/05 1000 Reverse Current - I R (mA) 1000 100 150°C 100 125°C 10 100°C 1 75°C 50°C .1 25°C .01 .001 0 Tj = 125°C 20 40 60 80 100 Reverse Voltage - VR (V) Fig. 2 - Typical Values Of Reverse Current Vs. Reverse Voltage (Per Leg) 10000 Tj = 25°C Junction Capacitance - C T (p F) Instantaneous Forward Current - I F (A) Tj = 175°C T =175°C J 10 Tj = 25°C 1 1000 0 0.3 0.6 0.9 1.2 1.5 1.8 0 10 20 30 40 50 60 70 80 90 100 Forward Voltage Drop - VFM (V) Fig. 1 - Max. Forward Voltage Drop Characteristics (Per Leg) Reverse Voltage - VR (V) Fig. 3 - Typical Junction Capacitance Vs. Reverse Voltage (Per Leg) Thermal Impedance Z thJC (°C/W) 1 D = 0.75 D = 0.50 0.1 D = 0.33 D = 0.25 D = 0.20 0.01 0.001 1E-05 Single Pulse (Thermal Resistance) 1E-04 1E-03 1E-02 1E-01 1E+00 1E+01 t1 , Rectangular Pulse Duration (Seconds) Fig. 4 - Max. Thermal Impedance ZthJC Characteristics (Per Leg) www.irf.com 3 403CNQ100PbF Bulletin PD-21111 12/05 200 DC 160 Average Power Loss (Watts) Allowable Case Temperature (°C) 180 140 120 Square wave (D=0.50) 80% rated Vr applied 100 D=0.08 D=0.17 D=0.25 150 D=0.33 D=0.50 DC 100 RMSLimit 50 see note (2) 80 0 50 100 150 200 250 0 0 300 100 150 200 250 300 Average Forward Current - IF(AV) (A) Average Forward Current - IF(AV) (A) Fig. 5 - Max. Allowable Case Temperature Vs. Average Forward Current (Per Leg) Non-Repetitive Surge Current - I FSM (A) 50 Fig. 6 - Forward Power Loss Characteristics (Per Leg) 100000 At Any Rated Load Condition And With Rated V RRM Applied Following Surge 10000 1000 10 100 1000 10000 Square Wave Pulse Duration - tp (microsec) Fig. 7 - Max. Non-Repetitive Surge Current (Per Leg) L IRFP460 DUT Rg = 25 ohm CURRENT MONITOR HIGH-SPEED SWITCH FREE-WHEEL DIODE + Vd = 25 Volt 40HFL40S02 Fig. 8 - Unclamped Inductive Test Circuit (2) Formula used: TC = TJ - (Pd + PdREV) x RthJC ; Pd = Forward Power Loss = IF(AV) x VFM @ (IF(AV) / D) (see Fig. 6); PdREV = Inverse Power Loss = VR1 x IR (1 - D); IR @ VR1 = 80% rated VR 4 www.irf.com 403CNQ100PbF Bulletin PD-21111 12/05 Outline Table Conforms to JEDEC Outline TO-244 Dimensions in millimeters and (inches) Ordering Information Table Device Code www.irf.com 40 3 C N Q 1 2 3 4 5 100 PbF 6 1 - Average Current Rating (x 10) 2 - Product Silicon Identification 3 - C = Circuit Configuration 4 - N = NOt Isolated 5 - Q = Schottky Rectifier Diode 6 - Voltage Rating (100 = 100V) 7 - Lead-Free 7 5 403CNQ100PbF Bulletin PD-21111 12/05 Data and specifications subject to change without notice. This product has been designed and qualified for Industrial Level and Lead-Free. Qualification Standards can be found on IR's Web site. IR WORLD HEADQUARTERS: 233 Kansas St., El Segundo, California 90245, USA Tel: (310) 252-7105 TAC Fax: (310) 252-7309 Visit us at www.irf.com for sales contact information. 12/05 6 www.irf.com