(1/1) SMD Inductors(Coils) For Power Line(Wound, Magnetic Shielded) Conformity to RoHS Directive VLF Series VLF12060 SHAPES AND DIMENSIONS 11.7±0.3 FEATURES • Mount area: 11.7.0× 12.0mm Low profile: 6.0mm max. height • Compare to SLF12565(TDK conventional product) type Low loss and large current capability design DC resistance: 0.88× SLF12565 Rated DC current: 1.43× SLF12565 • Generic use for portable DC to DC converter line • High magnetic shield construction should actualize high resolution for EMC protection. • Available for automatic mounting in tape and real package. • The products do not contain lead and support lead-free soldering. 12.0±0.3 6.0max. Dimensions in mm RECOMMENDED PC BOARD PATTERN 5.4 APPLICATIONS Note book computers, amusement equipment, DVD players, VRMs, plasma displays, etc. 7.0 12.6 Dimensions in mm ELECTRICAL CHARACTERISTICS Part No. Inductance (µH) Inductance tolerance(%) Test frequency (kHz) VLF12060T-1R8N120 VLF12060T-2R7N100 VLF12060T-3R9N9R0 VLF12060T-4R7N7R7 VLF12060T-6R8N7R2 VLF12060T-100M6R2 VLF12060T-150M5R0 VLF12060T-220M4R1 VLF12060T-330M3R4 VLF12060T-470M2R8 VLF12060T-680M2R3 VLF12060T-101M1R9 VLF12060T-151M1R6 VLF12060T-221M1R3 VLF12060T-331M1R0 1.8 2.7 3.9 4.7 6.8 10 15 22 33 47 68 100 150 220 330 ±30 ±30 ±30 ±30 ±30 ±20 ±20 ±20 ±20 ±20 ±20 ±20 ±20 ±20 ±20 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 DC resistance(mΩ) max. typ. 4.4 6.4 8.4 11.6 13.1 16 26 36 53 71 100 152 215 352 464 3.6 5.3 7.0 9.6 10.9 13.9 22.3 31.4 46.1 62.2 87.5 132.4 187.1 306.8 404 Rated current(A)∗ Based on inductance change max. 14.6 12 9.9 9.1 7.5 6.2 5.0 4.1 3.4 2.8 2.3 1.9 1.6 1.3 1.0 Based on temperature rise typ. 12 10 9 7.7 7.2 6.4 5.0 4.2 3.5 3.0 2.5 2.0 1.7 1.3 1.1 ∗ Rated current: Value obtained when current flows and the temperature has risen to 40°C or when DC current flows and the nominal value of inductance has fallen by 30%, whichever is smaller. • Operating temperature range: –40 to +105°C (Including self-temperature rise) • Conformity to RoHS Directive: This means that, in conformity with EU Directive 2002/95/EC, lead, cadmium, mercury, hexavalent chromium, and specific bromine-based flame retardants, PBB and PBDE, have not been used, except for exempted applications. • All specifications are subject to change without notice. 001-04 / 20061024 / e531_vlf12060.fm