VLMW321.. www.vishay.com Vishay Semiconductors Power SMD LED PLCC-4 FEATURES • 3 anode pins, 1 cathode pin • High efficient INGaN technology • Long life time, due to silicone casting • Angle of half intensity = ± 60° • Available in 8 mm tape • Luminous intensity and color categorized per packing unit 19210_1 DESCRIPTION • Luminous intensity ratio per packing unit IVmax./IVmin. 1.6 The VLMW321.. white LED is an advanced product in terms of heat dissipation. • ESD-withstand voltage: Up to 2 kV (HBM) according to JESD22-A114-B The leadframe profile of this PLCC-4 SMD package is optimized to reduce the thermal resistance. • Preconditioning: according to JEDEC level 2a • Compatible with IR-reflow, vapor phase and wave soldering processes according to CECC 00802 and J-STD-020 This allows higher drive current and doubles the light output compared to Vishay’s high intensity SMD LED in PLCC-2 standard package. • AEC-Q101 qualified • Material categorization: For definitions of compliance please see www.vishay.com/doc?99912 PRODUCT GROUP AND PACKAGE DATA • Product group: LED • Package: SMD PLCC-4 APPLICATIONS • Product series: power • Camera flash light • Angle of half intensity: ± 60° • Signals, signs, and symbol luminaire • Marker lights • Interior and exterior automotive lighting (brake lights, turn lights, backlighting, side markers) • Indicator lighting • General and architectural lighting • Backlighting (advertising, displays, LCDs, switches, ...) PARTS TABLE PART COLOR LUMINOUS INTENSITY (mcd) at IF (mA) COORDINATE (x, y) at IF (mA) FORWARD VOLTAGE (V) at IF TECHNOLOGY (mA) MIN. TYP. MAX. MIN. TYP. MAX. - 30 2.9 3.4 4 30 InGaN on SiC - 30 2.9 3.4 4 30 InGaN on SiC VLMW321ABBB5K8L-08 White 1400 2200 2850 30 - 0.33, 0.33 VLMW321BACA5K8L-08 White 1800 2800 3550 30 - 0.33, 0.33 MIN. TYP. MAX. Rev. 1.2, 25-Apr-13 Document Number: 81191 1 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 VLMW321.. www.vishay.com Vishay Semiconductors ABSOLUTE MAXIMUM RATINGS (Tamb = 25 °C, unless otherwise specified) VLMW321.. PARAMETER TEST CONDITION SYMBOL VALUE VR 5 V Tamb 60 °C IF 50 mA tp 10 μs Reverse voltage (1) DC forward current Surge forward current UNIT IFSM 0.3 A Power dissipation PV 200 mW Junction temperature Tj 125 °C Operating temperature range Tamb - 40 to + 110 °C Storage temperature range Tstg - 40 to + 110 °C RthJA 300 K/W Thermal resistance junction/ambient Mounted on PC board (pad design see page 6) Note (1) Driving the LED in reverse direction is suitable for a short term application OPTICAL AND ELECTRICAL CHARACTERISTICS (Tamb = 25 °C, unless otherwise specified) VLMW321.., WHITE PARAMETER TEST CONDITION Luminous intensity IF = 30 mA Luminous flux IF = 30 mA PART SYMBOL MIN. TYP. MAX. UNIT VLMW321ABBB5K8L IV 1400 2200 2850 mcd VLMW321BACA5K8L IV 1800 2800 3550 mcd VLMW321ABBB5K8L V - 7000 - mlm VLMW321BACA5K8L V - 8900 - mlm x - 0.33 - Chromaticity coordinate x, y acc. to CIE 1931 IF = 30 mA y - 0.33 - Angle of half intensity IF = 30 mA - ± 60 - Forward voltage IF = 30 mA VF 2.9 3.4 4 V Reverse voltage IR = 10 μA VR 5 - - V Temperature coefficient of VF IF = 30 mA TCVF - - 3.6 - mV/K Temperature coefficient of IV IF = 30 mA TCIV - - 0.5 - %/K Temperature coefficient of x IF = 30 mA TCx - - 0.0002 - Dx/K Temperature coefficient of y IF = 30 mA TCy - - 0.0003 - Dy/K deg LUMINOUS INTENSITY CLASSIFICATION GROUP LIGHT INTENSITY (mcd) STANDARD MIN. MAX. AB 1400 1800 BA 1800 2240 BB 2240 2850 CA 2850 3550 Note • Luminous intensity is tested at a current pulse duration of 25 ms and an accuracy of ± 11 %. The above type numbers represent the order groups which include only a few brightness groups. Only one group will be shipped on each reel (there will be no mixing of two groups on each reel). In order to ensure availability, single brightness groups will not be orderable. In a similar manner for colors where wavelength groups are measured and binned, single wavelength groups will be shipped on any one reel. In order to ensure availability, single wavelength groups will not be orderable. Rev. 1.2, 25-Apr-13 Document Number: 81191 2 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 VLMW321.. www.vishay.com Vishay Semiconductors CHROMATICITY COORDINATED GROUPS FOR WHITE SMD LED 5L 5K 6L 6K X Y X Y 0.291 0.268 0.330 0.330 0.285 0.279 0.330 0.347 0.307 0.312 0.347 0.371 0.310 0.297 0.345 0.352 0.296 0.259 0.330 0.310 0.291 0.268 0.330 0.330 0.310 0.297 0.338 0.342 0.313 0.284 0.352 0.344 0.310 0.297 0.345 0.352 0.307 0.312 0.347 0.371 0.330 0.347 0.367 0.401 0.330 0.330 0.364 0.380 0.313 0.284 0.352 0.344 0.310 0.297 0.338 0.342 0.330 0.330 0.364 0.380 0.330 0.310 0.360 0.357 7L 7K 8L 8K Note • Chromaticity coordinate groups are tested at a current pulse direction of 25 ms and a tolerance of ± 0.01. TYPICAL CHARACTERISTICS (Tamb = 25 °C, unless otherwise specified) IV rel - Relative Luminous Intensity IF - Forward Current (mA) 60 50 40 30 20 10 10 1 0.1 0.01 0 0 21880 20 40 60 80 100 120 Tamb - Ambient Temperature (°C) Fig. 1 - Forward Current vs. Ambient Temperature Rev. 1.2, 25-Apr-13 1 21881 10 100 IF - Forward Current (mA) Fig. 2 - Relative Luminous Intensity vs. Forward Current Document Number: 81191 3 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 VLMW321.. www.vishay.com Vishay Semiconductors 0° 10 10° 20° 30° 40° 1.0 0.9 50° 0.8 60° 70° 0.7 ϕ - Angular Displacement IV rel - Relative Luminous Intensity IF - Forward Current (mA) 100 80° 1 0 21882 1 2 3 4 0.6 5 Fig. 3 - Forward Current vs. Forward Voltage 0.2 0 Fig. 5 - Relative Luminous Intensity vs. Angular Displacement 1.2 0.40 1.0 8L 8K 0.35 0.8 y-Coordinates Irel - Relative Luminous Intensity 0.4 95 10319 VF - Forward Voltage (V) 0.6 0.4 7L 7K 6L 6K 0.30 5L 5K 0.25 0.2 0 400 21883 450 500 550 600 650 700 λ - Wavelength (nm) Fig. 4 - Relative Intensity vs. Wavelength Rev. 1.2, 25-Apr-13 0.20 0.25 19784_3 0.27 0.29 0.31 0.33 0.35 0.37 x-Coordinates Fig. 6 - White Grouping SMD Document Number: 81191 4 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 VLMW321.. www.vishay.com Vishay Semiconductors REEL DIMENSIONS in millimeters GS08 = 2000 pcs 20983 Rev. 1.2, 25-Apr-13 Document Number: 81191 5 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 VLMW321.. www.vishay.com Vishay Semiconductors TAPING DIMENSIONS in millimeters Taping and orientation 180 reel come in quantity of 2000 units 330 reel come in quantity of 8000 units Package marking 2 ± 0.1 ± 0.05 2.29 ± 0.1 A A A C ± 0.1 + 0.3 - 0.1 3.81 8 3.5 ± 0.05 1.75 4 ± 0.1 Ø 1.5 + 0.1 4 3.05 ± 0.1 Ø1 0.229 ± 0.1 200 mm min. for 180 reel 480 mm min. for 180 reel 200 mm min. for 330 reel 960 mm min. for 330 reel Trailer ± 0.02 + 0.1 Component Leader technical drawings End according to DIN specifications User feed direction Drawing-No.: 9.700-5334.01-4 Issue: 3; 27.11.08 21066 Rev. 1.2, 25-Apr-13 Document Number: 81191 6 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 VLMW321.. www.vishay.com Vishay Semiconductors OPTIONAL PAD DESIGN DIMENSIONS in millimeters (Reflow-Soldering), RthJA = 290 K/W 20982 Rev. 1.2, 25-Apr-13 Document Number: 81191 7 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 VLMW321.. www.vishay.com Vishay Semiconductors SOLDERING PROFILE DRY PACKING The reel is packed in an anti-humidity bag to protect the devices from absorbing moisture during transportation and storage. IR Reflow Soldering Profile for lead (Pb)-free soldering Preconditioning acc. to JEDEC Level 2a 300 max. 260 °C 245 °C 255 255°C°C 240 °C 217 °C 250 Aluminum bag T [°C] 200 Label max. 30 s 150 max. 100 s max. 120 s 100 max. Ramp Down 6 °C/s max. Ramp Up 3 °C/s 50 Reel 0 0 50 100 150 250 200 300 15973 t [s] 19470-3 max. 2 cycles allowed Fig. 7 - Vishay Lead (Pb)-free Reflow Soldering Profile (acc. to J-STD-020) TTW Soldering (acc. to CECC00802) FINAL PACKING The sealed reel is packed into a cardboard box. A secondary cardboard box is used for shipping purposes. 300 5s Temperature (°C) 250 lead temperature 235 °C to 260 °C first wave 200 second full line: typical wave dotted line: process limits ca. 200 K/s 150 100 °C to 130 °C ca. 2 K/s RECOMMENDED METHOD OF STORAGE Dry box storage is recommended as soon as the aluminum bag has been opened to prevent moisture absorption. The following conditions should be observed, if dry boxes are not available: • Storage temperature 10 °C to 30 °C 100 • Storage humidity 60 % RH max. 2 K/s ca. 5 K/s 50 After more than 672 h under these conditions moisture content will be too high for reflow soldering. forced cooling 0 0 50 100 150 200 250 Time (s) 948626-1 Fig. 8 - Double Wave Soldering of Opto Devices (all Packages) BAR CODE PRODUCT LABEL (example) 106 A H In case of moisture absorption, the devices will recover to the former condition by drying under the following condition: 192 h at 40 °C + 5 °C/- 0 °C and < 5 % RH (dry air/nitrogen) or 96 h at 60 °C + 5 °C and < 5 % RH for all device containers or 24 h at 100 °C + 5 °C not suitable for reel or tubes. An EIA JEDEC standard JESD22-A112 level 2a label is included on all dry bags. 37 L E V E L CAUTION This bag contains MOISTURE –SENSITIVE DEVICES B C D E F G 19795 A. Type of component B. Manufacturing plant C. SEL - selection code (bin): e.g.: V1 = code for luminous intensity group 5L = code for chrom. coordinate group D. Date code year/week E. Day code (e. g. 1: Monday) F. Batch no. G. Total quantity H. Company code Rev. 1.2, 25-Apr-13 2a 1. Shelf life in sealed bag 12 months at <40°C and < 90% relative humidity (RH) 2. After this bag is opened devices that will be subjected to infrared reflow, vapor-phase reflow, or equivalent processing (peak package body temp. 260°C) must be: a) Mounted within 672 hours at factory condition of < 30°C/60%RH or b) Stored at <10% RH. 3. Devices require baking before mounting if: a) Humidity Indicator Card is >10% when read at 23°C + 5°C or b) 2a or 2b is not met. 4. If baking is required, devices may be baked for: 192 hours at 40°C + 5°C/-0°C and <5%RH (dry air/nitrogen) or o or 96 hours at 60±5 Cand <5%RH For all device containers 24 hours at 100±5°C Not suitable for reels or tubes Bag Seal Date: ______________________________ (If blank, see bar code label) Note: LEVEL defined by EIA JEDEC Standard JESD22-A113 19786 Example of JESD22-A112 level 2a label Document Number: 81191 8 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 VLMW321.. www.vishay.com Vishay Semiconductors ESD PRECAUTION Proper storage and handling procedures should be followed to prevent ESD damage to the devices especially when they are removed from the antistatic shielding bag. Electro-static sensitive devices warning labels are on the packaging. Rev. 1.2, 25-Apr-13 Document Number: 81191 9 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Legal Disclaimer Notice www.vishay.com Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer’s technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed therein. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. Material Category Policy Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as RoHS-Compliant fulfill the definitions and restrictions defined under Directive 2011/65/EU of The European Parliament and of the Council of June 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment (EEE) - recast, unless otherwise specified as non-compliant. Please note that some Vishay documentation may still make reference to RoHS Directive 2002/95/EC. We confirm that all the products identified as being compliant to Directive 2002/95/EC conform to Directive 2011/65/EU. Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as Halogen-Free follow Halogen-Free requirements as per JEDEC JS709A standards. Please note that some Vishay documentation may still make reference to the IEC 61249-2-21 definition. We confirm that all the products identified as being compliant to IEC 61249-2-21 conform to JEDEC JS709A standards. Revision: 02-Oct-12 1 Document Number: 91000