OSCILENT 420-12.0M-5EN-T

Oscilent Corporation | 420 Series Surface Mount Crystal Oscillator
Page 1 of 3
SMD Oscillators
Series Number
Package
Description
Last Modified
420
Plastic J-Lead
HCMOS / TTL Output
Jan. 01 2007
FEATURES
- Low Jitter
- Extended temperature range capabilities
- Tape and Reel
- Tri-State enable / disable
- 5V or 3.3V optional
- RoHs / Lead Free compliant
OPERATING CONDITIONS / ELECTRICAL CHARACTERISTICS
PARAMETERS
CONDITIONS
CHARACTERISTICS
Output Logic
-
HCMOS / TTL Output
Input Voltage (VDD)
-
Frequency Range (fO)
-
1.0 ~ 150.000
MHz
Operating Temperature (TOPR)
-
0 ~ +70 Std. (Ext Temp Avail. See Table Below)
°C
Storage Temperature (TSTG)
-
-55 ~ +125
°C
Frequency Stability
Input Current (IDD)
Aging
Rise Time (TR) / Fall Time (TF)
PIN 1 Tri-State
Output Voltage High "1" VOH
Output Voltage Low "0" VOL
Duty Cycle
Start-Up Time (TS)
Jitter (RMS)
3.3 ±10%
5.0 ±10%
UNITS
VDC
a+b+c+d
±50, ±100 max. (Tighter Stability Avail.)
ppm
(a) Frequency Tolerance
Inclusive of Overall Stability
-
(b) Temperature Stability
Inclusive of Overall Stability (Operating Temperature)
-
(c) Input Voltage Stability
Inclusive of Overall Stability (VDD ±10%)
-
(d) Load Stability
Inclusive of Overall Stability (RL ±5%)
-
-
10 ~ 35 max.
23 ~ 50 max.
mA
@ 25°C
±5 max.
ppm/Y
-
8 max. (0.4V to 2.4V w/ TTL, 20% ~ 80% / HCMOS)
nS
-
Option
-
TTL Load
2.4 min.
HCMOS Load
2.7 min.
VDD-0.5 min.
TTL Load
0.4 max.
HCMOS Load
0.5 max.
-
50 ±10 (Std.) / 50 ±5 (Option)
1~ 26 MHz
4 max.
26 ~ 66.667 MHz
10 max.
1.000 ~ 50.000 MHz
±10 max.
50.100 ~ 79.900 MHz
±5 max.
80.000 ~ 150.000 MHz
±3 max.
VDC
VDC
%
mS
ps
Oscilent Corporation | 420 Series Surface Mount Crystal Oscillator
Page 2 of 3
PIN CONNECTIONS
No Connection or
#1 Tri-State Enable
High
#2 Case Ground
#3 Output
#4 Vdd
PART NUMBER GUIDE
Series
Number
420
Oscilent
SMD
Oscillators
Frequency
Voltage
Supply
Option
Frequency
Tolerance &
Stability (max.)
Operating Temp. (°
C)
Duty Cycle
Pin 1 Connection
- 12.0M
-3
E
N
-T
TS
Enter your desired
frequency e.g. 12.0M =
12.000MHz See table
5 = 5VDC
3 = 3.3VDC
D=
E=
±100 PPM
±50 PPM
below for standard
frequencies.
Blank* = 0~+70
C = -10~+70
D = -20~+70
N = -40~+85
Blank*= 50±10%
T = -50±5%
NOTE: - Deviations on all parameters available. Please consult Oscilent for details.
DEFINITIONS: - Click on the characteristic names above, for definitions of the particular characteristic.
*STANDARDS: - "Blank" part number selections, indicate standard variables for the particular characteristic.
PACKAGING: - Add -TR for Tape/Reel. Click here for tape/reel specifications
PART NUMBER CODING
- STANDARD OSCILLATOR FREQUENCIES
FREQUENCY (1.0 ~ 15.9744 MHz)
FREQUENCY (16.0 ~ 66.666 MHz)
1.0
16.0
1.2288
16.257
1.8432
16.384
2.0
17.734475
2.4576
18.0
3.579545
18.432
NC = No
Connnection
TS = Tri-State
Enable High
Oscilent Corporation | 420 Series Surface Mount Crystal Oscillator
3.6864
19.6608
4.0
20.0
4.9152
24.0
5.0
24.576
5.0688
25.0
6.0
25.175
6.144
28.322
7.3728
30.0
8.0
32.0
9.216
32.514
9.8304
33.0
10.0
35.0
11.0592
40.0
12.0
48.0
12.288
50.0
12.8
64.000
14.31818
65.0
14.7456
66.666
15.9744
-
Page 3 of 3
NOTE: Other frequencies available. Please consult Oscilent for part numbers
Oscilent Corporation -
CALL 949.252.0522
18195 East McDurmott Street . Building D . Irvine . CA 92614 . USA
Fax: 949.252.0599 . E-Mail: [email protected]
Crystal Oscillators | Quartz Crystal | TCXO | VCXO | IF SAW Filter | RF SAW Filter | Ceramic Resonator
Crystal Filter | Ceramic Filter | SAW Filter / SAW Devices | Site Map
Series No.:
420