T-1 (3mm) BI-LEVEL LED INDICATOR Part Number: WP7104ALUP/2SRD-0L Super Bright Red Features Description z I.C. COMPATIBLE. The Super Bright Red source color devices are made with z BLACK CASE ENHANCES CONTRAST RATIO. Gallium Aluminum Arsenide Red Light Emitting Diode. z WIDE VIEWING ANGLE. z HIGH RELIABILITY LIFE MEASURED IN YEARS. z HOUSING MATERIAL: PPA. z RoHS COMPLIANT. Package Dimensions Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance is ±0.25(0.01") unless otherwise noted. 3. Lead spacing is measured where the leads emerge from the package. 4. Specifications are subject to change without notice. SPEC NO: DSAH3815 REV NO: V.1 DATE: MAY/09/2007 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: Y.L.LI PAGE: 1 OF 5 ERP: 1102009883 Selection Guide Part No. Dice WP7104ALUP/2SRD-0L Lens Type Super Bright Red (GaAlAs) Viewing Angle [1] Iv (mcd) [2] @ 20mA Min. Typ. 2θ1/2 110 300 40° RED DIFFUSED Notes: 1. θ1/2 is the angle from optical centerline where the luminous intensity is 1/2 the optical centerline value. 2. Luminous intensity/ luminous Flux: +/-15%. Electrical / Optical Characteristics at TA=25°C Symbol Parameter Device Typ. λpeak Peak Wavelength Super Bright Red λD [1] Dominant Wavelength Δλ1/2 Max. Units Test Conditions 660 nm IF=20mA Super Bright Red 640 nm IF=20mA Spectral Line Half-width Super Bright Red 20 nm IF=20mA C Capacitance Super Bright Red 45 pF VF=0V;f=1MHz VF [2] Forward Voltage Super Bright Red 1.85 2.5 V IF=20mA IR Reverse Current Super Bright Red 10 uA VR=5V Notes: 1.Wavelength: +/-1nm. 2. Forward Voltage: +/-0.1V. Absolute Maximum Ratings at TA=25°C Parameter Super Bright Red Units Power dissipation 75 mW DC Forward Current 30 mA Peak Forward Current [1] 155 mA 5 V Reverse Voltage Operating Temperature -40°C To +85°C Storage Temperature -40°C To +85°C Note: 1. 1/10 Duty Cycle, 0.1ms Pulse Width. SPEC NO: DSAH3815 REV NO: V.1 DATE: MAY/09/2007 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: Y.L.LI PAGE: 2 OF 5 ERP: 1102009883 Super Bright Red WP7104ALUP/2SRD-0L SPEC NO: DSAH3815 REV NO: V.1 DATE: MAY/09/2007 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: Y.L.LI PAGE: 3 OF 5 ERP: 1102009883 WP7104ALUP/2SRD-0L Tape Specifications (Units : mm) SPEC NO: DSAH3815 REV NO: V.1 DATE: MAY/09/2007 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: Y.L.LI PAGE: 4 OF 5 ERP: 1102009883 PACKING & LABEL SPECIFICATIONS WP7104ALUP/2SRD-0L SPEC NO: DSAH3815 REV NO: V.1 DATE: MAY/09/2007 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: Y.L.LI PAGE: 5 OF 5 ERP: 1102009883