MOLEX 43860-0007

Modular Jack
FEATURES AND SPECIFICATIONS
Features and Benefits
Plug latch on top
Lightpipes molded in low- or high-temperature materials
Lower electrical noise than LED offerings
34% fewer leads than LED offerings
Enhanced grounding tabs on shield
Surface Mount Compatible for high temperature lightpipe
version
■ Shortened leads with bottom contacts
■
■
■
■
■
■
Electrical
Electrical Voltage: 125V
Current: 1.5A max.
Contact Resistance: 10mΩ max.
Dielectric Withstanding Voltage: 1000V AC
Insulation Resistance: 500 MΩ min.
Mechanical
Durability: 500 cycles
Physical
Housing: Black glass-filled, high-temperature nylon, UL 94V-0
Plating: Contact area—1.27µm (50µ") min. Gold
Solder tails—1.27µm (50µ") Tin/Lead
On both contact area and solder tails over nickel overall
Temperature: -40 to +80°C
Reference Information
Product Specification: PS-43860-003
Packaging: Unshielded—Tube
Shielded—Tray
UL File No.: E107635
CSA File No.: LR149980
Designed in: Inches
43860
Right Angle, Low Profile
Inverted Shielded and
Unshielded Versions with
Low or High Temperature
Lightpipes
ORDERING INFORMATION AND DIMENSIONS
Low Temperature
Order No.
Circuits
Loaded Contacts
6
6
6
6
6
6
8
8
8
4
4
4
6
6
6
8
8
8
Unshielded
Dimension
Shielded
With All Panel
With Offset Panel
Grounding Tabs
Grounding Tabs
43860-0009
43860-0012
43860-0018
43860-0008
43860-0011
43860-0017
43860-0007
43860-0010
43860-0016
A
B
C
D
15.17 (.670)
16.18 (.637)
16.18 (.637)
15.17 (.670)
16.18 (.637)
16.18 (.637)
15.17 (.670)
16.18 (.637)
16.18 (.637)
3.07 (.120)
3.07 (.120)
3.07 (.120)
5.09 (.200)
5.09 (.200)
5.09 (.200)
7.11 (.280)
7.11 (.280)
7.11 (.280)
9.88 (.389)
9.88 (.389)
9.88 (.389)
9.88 (.389)
9.88 (.389)
9.88 (.389)
11.91 (.469)
11.91 (.469)
11.91 (.469)
13.21 (.520)
13.53 (.533)
13.53 (.533)
13.21 (.520)
13.53 (.533)
13.53 (.533)
13.21 (.520)
13.53 (.533)
13.53 (.533)
High Temperature
Circuits
Loaded Contacts
6
6
6
6
8
8
4
4
6
6
8
8
With All Panel
Grounding Tabs
43860-1012
Order No.
With Offset Panel
Grounding Tabs
43860-1018
43860-1011
43860-1017
43860-1010
43860-1016
Dimension
A
B
16.18 (.637)
16.18 (.637)
16.18 (.637)
16.18 (.637)
16.18 (.637)
16.18 (.637)
3.07 (.120)
3.07 (.120)
5.09 (.200)
5.09 (.200)
7.11 (.280)
7.11 (.280)
C
9.88 (.389)
9.88 (.389)
9.88 (.389)
9.88 (.389)
11.91 (.469)
11.91 (.469)
D
13.53 (.533)
13.53 (.533)
13.53 (.533)
13.53 (.533)
13.53 (.533)
13.53 (.533)
Features and Benefits
Typical Applications
■ Signal integrity remains high due to no interference from
■ Networking Products (Hubs, Routers, Switches, and
LED leads
■ Lightpipes reduce the electronic noise from LEDs by as
■
much as 50%
■
■ The inverted RJ45 Lightpipe modular jack provides Cate- ■
gory 5 performance for fast Ethernet applications
■
■ Meets FCC 68.5 specification when plating selection is 50µ" ■
Bridges)
Security Systems
Multimedia Set-Top Boxes (Interactive)
Mini-PCI
Home Office Routers and Hubs
Modems
Molex's New Modular Jacks
With Lightpipes Reduce
EMI/RFI Over 50%
Molex Incorporated introduces a new inverted right angle
modular jack with lightpipes that significantly reduces the
noise created by the "antenna" effect of LED leads incorporated
into the modular jack. The lightpipes direct the light emitted
from the LEDs mounted on the PC board rather than using
conventional LEDs mounted in the modular jacks. This design
maintains signal integrity since there is no interference from
LED leads. Because the LEDs are located on the PC board, you
can select the colors used for the LEDs. Unlike typical LED
modular jacks, you are not restricted to the standard green,
yellow or orange LEDs. The combination of PC board mounted
LEDs and lightpipes results in less noise being radiated though
transmission lines.
of gold (30 and 15µ" of gold plating are also available)
■ Each Molex modular jack is 100% electronically tested to
detect possible shorting conditions before the product is
shipped
■ Plug latch on top of jack provides easy thumb depression
for mating and unmating
■ Inventory can be reduced by not stocking modjacks with
different colored LEDs
The inverted modular jacks with lightpipes are available in
through hole styles for wave soldering or a high temperature
version for reflow soldering. The high-temperature version
maintains performance at a +260°C reflow soldering
temperature for 1 minute without deforming the modular jack
or lightpipe. Shielded and unshielded offerings are available
for both RJ11 and RJ45 configurations for the standard
through hole version and a shielded modular jack is offered
with the high temperature lightpipes.
Americas Headquarters
Lisle, Illinois 60532 U.S.A.
Tel: 1-800-78MOLEX
Fax: 630-969-1352
Far East North Headquarters
Yamato, Kanagawa, Japan
Tel: 81-462-65-2324
Fax: 81-462-65-2366
Far East South Headquarters
Jurong, Singapore
Tel: 65-268-6868
Fax: 65-265-6044
European Headquarters
Munich, Germany
Tel: 49-89-413092-0
Fax: 49-89-401527
Corporate Headquarters
2222 Wellington Ct.
Lisle, IL 60532 U.S.A.
Tel: 630-969-4550
Fax: 630-969-1352
V i si t o u r W e b si t e at h t t p: / / www.mo l e x .co m
Order No. USA-062
Printed in USA/5K/JI/JI/99.08
1999, Molex
©