XC6201 Series ETR0301_004 Positive Voltage Regulators ■GENERAL DESCRIPTION The XC6201 series are highly precise, low power consumption, positive voltage regulators manufactured using CMOS and laser trimming technologies. The series provides large currents with a significantly small dropout voltage. The XC6201 consists of a current limiter circuit, a driver transistor, a precision reference voltage and an error amplifier. Output voltage is selectable in 0.1V steps between 1.3V ~ 6.0V. SOT-25, SOT-89, USP-6B and TO-92 packages are available. ■APPLICATIONS ■FEATURES ●Mobile Phones Maximum Output Current : 250mA (TYP.) ●Cordless phones, wireless communication equipment Dropout Voltage : 0.16V @ 100mA ●Cameras, video recorders : 0.40V @ 200mA Maximum Operating Voltage ●Portable games : 10V Output Voltage Range : 1.3V ~ 6.0V (0.1V increments) ●Portable AV equipment Fixed Voltage Accuracy : ±1% (VOUT(T)>2.0V) ±2% ●Reference voltage ●Battery powered equipment Low Power Consumption : 2.0μA (TYP.) Operational Temperature Range : -40℃ ~ 85℃ Packages : SOT-25, SOT-89 TO-92 Environmentally Friendly USP-6B : EU RoHS Compliant, Pb Free Tantalum or Ceramic Capacitor compatible ■TYPICAL APPLICATION CIRCUIT ■TYPICAL PERFORMANCE CHARACTERISTICS ●Supply Current vs. Input Voltage XC6201P332 1/24 XC6201 Series ■PIN CONFIGURATION NC VIN VSS NC VOUT NC *The dissipation pad for the USP-6B package should be solder-plated in recommended mount pattern and metal masking so as to enhance mounting strength and heat release. If the pad needs to be connected to other pins, it should be connected to the VSS (No.5) pin. (SIDE VIEW) ■PIN ASSIGNMENT PIN NUMBER PIN NAME FUNCTION 3 VOUT Output 2 5 VSS Ground 3 1 VIN Power Input - 2,4,6 NC No Connection SOT-25 SOT-89/TO-92 (T) USP-6B 5 1 2 1 3, 4 ■PRODUCT CLASSIFICATION ●Ordering Information X C 6 2 0 1 P ③④⑤⑥⑦-⑧(*1) ① ② DESIGNATOR DESCRIPTION SYMBOL ① Product Number 01 - ② Type of Regulator P 3-pin regulator ③④ Output Voltage 13~60 ⑤ Output Voltage Accuracy ⑥⑦-⑧ Packages Taping Type (*2) DESCRIPTION e.g. 30:3.0V 50:5.0V 1 ±1% 2 ±2% MR SOT-25 MR-G SOT-25 PR SOT-89 PR-G SOT-89 TH TH-G TB TB-G DR DR-G TO-92 Taping Type: Paper type TO-92 Taping Type: Paper type TO-92 Taping Type: Bag TO-92 Taping Type: Bag USP-6B USP-6B * +1% accuracy can be set at VOUT(T) > 2.0V. (*1) (*2) The “-G” suffix indicates that the products are Halogen and Antimony free as well as being fully RoHS compliant. The device orientation is fixed in its embossed tape pocket. For reverse orientation, please contact your local Torex sales office or representative. (Standard orientation: ⑥R-⑧, Reverse orientation: ⑥L-⑧) 2/24 XC6201 Series ■BLOCK DIAGRAM ■ABSOLUTE MAXIMUM RATINGS Ta = 25℃ UNITS PARAMETER SYMBOL RATINGS Input Voltage Output Current Output Voltage SOT-25 SOT-89 Power Dissipation TO-92 USP-6B Operating Temperature Range Storage Temperature Range VIN IOUT VOUT 12.0 500 VSS-0.3~VIN+0.3 250 500 300 120 -40~+85 -55~+125 Pd Topr Tstg V mA V mW ℃ ℃ ■ELECTRICAL CHARACTERISTICS XC6201P132 VOUT(T)=1.3V (*1) Ta=25℃ PARAMETER SYMBOL Output Voltage VOUT(E) (*2) Maximum Output Current IOUTmax Load Regulation △VOUT Dropout Voltage (*3) Supply Current Line Regulation Input Voltage Output Voltage Temperature Characteristics Vdif1 Vdif2 ISS △VOUT △VIN・△VOUT VIN △VOUT △Topr・△VOUT CONDITIONS VIN=2.3V IOUT=10mA VIN=2.3V VOUT(E)≧1.17V VIN=2.3V 1mA≦IOUT≦30mA IOUT=30mA IOUT=60mA VIN=2.3V IOUT=10mA 2.3V≦VIN≦10.0V IOUT=40mA -40℃≦Topr≦85℃ MIN. TYP. MAX. UNITS CIRCUIT 1.274 1.300 1.326 V ② 60 - - mA ② - 10 30 mV ② - 200 500 2.0 600 810 5.0 mV ② μA ① - 0.2 0.3 %/V ② 1.8 - 10 V - - ±100 - ppm/℃ ② 3/24 XC6201 Series ■ELECTRICAL CHARACTERISTICS (Continued) XC6201P182 VOUT(T)=1.8V (*1) Ta=25℃ PARAMETER SYMBOL Output Voltage VOUT(E) (*2) Maximum Output Current IOUTmax Load Regulation △VOUT Dropout Voltage (*3) Supply Current Line Regulation Input Voltage Output Voltage Temperature Characteristics XC6201P272 Vdif1 Vdif2 ISS △VOUT △VIN・△VOUT VIN △VOUT △Topr・△VOUT VIN=2.8V IOUT=40mA VIN=2.8V VOUT(E)≧1.62V VIN=2.8V 1mA≦IOUT≦40mA IOUT=40mA IOUT=80mA VIN=2.8V IOUT=40mA 2.8V≦VIN≦10.0V MIN. TYP. MAX. UNITS CIRCUIT 1.764 1.800 1.836 V ② 80 - - mA ② - 10 30 mV ② - 200 450 2.0 370 710 5.0 mV ② μA ① - 0.2 0.3 %/V ② 1.8 - 10 V - IOUT=40mA -40℃≦Topr≦85℃ - ±100 - ppm/℃ ② CONDITIONS MIN. TYP. MAX. UNITS CIRCUIT 2.646 2.700 2.754 V ② 100 - - mA ② - 15 40 mV ② - 200 450 2.0 370 710 5.0 mV ② μA ① - 0.2 0.3 %/V ② 1.8 - 10 V - - ±100 - ppm/℃ ② VOUT(T)=2.7V (*1) Ta=25℃ PARAMETER SYMBOL Output Voltage VOUT(E) (*2) Maximum Output Current IOUTmax Load Regulation △VOUT Dropout Voltage (*3) Supply Current Line Regulation Input Voltage Output Voltage Temperature Characteristics 4/24 CONDITIONS Vdif1 Vdif2 ISS △VOUT △VIN・△VOUT VIN △VOUT △Topr・△VOUT VIN=3.7V IOUT=40mA VIN=3.7V VOUT(E)≧2.43V VIN=3.7V 1mA≦IOUT≦60mA IOUT=60mA IOUT=120mA VIN=3.7V IOUT=40mA 3.7V≦VIN≦10.0V IOUT=40mA -40℃≦Topr≦85℃ XC6201 Series ■ELECTRICAL CHARACTERISTICS (Continued) XC6201P332 VOUT(T)=3.3V (*1) Ta=25℃ PARAMETER SYMBOL Output Voltage VOUT(E) (*2) Maximum Output Current IOUTmax Load Regulation △VOUT Dropout Voltage (*3) Supply Current Line Regulation Input Voltage Output Voltage Temperature Characteristics XC6201P502 Vdif1 Vdif2 ISS △VOUT △VIN・△VOUT VIN △VOUT △Topr・△VOUT VOUT(T)=5.0V Output Voltage VOUT(E) (*2) Maximum Output Current IOUTmax Load Regulation △VOUT Line Regulation Input Voltage Output Voltage Temperature Characteristics TYP. MAX. UNITS CIRCUIT 3.234 3.300 3.366 V ② 150 - - mA ② - 20 50 mV ② - 200 450 2.0 360 700 5.0 mV ② μA ① - 0.2 0.3 %/V ② 1.8 - 10 V - IOUT=40mA -40℃≦Topr≦85℃ - ±100 - ppm/℃ ② CONDITIONS MIN. TYP. MAX. UNITS CIRCUIT 4.900 5.000 5.100 V ② 200 - - mA ② - 30 70 mV ② - 160 400 2.0 340 600 6.0 mV ② μA ① - 0.2 0.3 %/V ② 1.8 - 10 V - - ±100 - ppm/℃ ② Ta=25℃ SYMBOL Supply Current VIN=4.3V IOUT=40mA VIN=4.3V VOUT(E)≧2.97V VIN=4.3V 1mA≦IOUT≦80mA IOUT=80mA IOUT=160mA VIN=4.3V IOUT=40mA 4.3V≦VIN≦10.0V MIN. (*1) PARAMETER Dropout Voltage (*3) CONDITIONS Vdif1 Vdif2 ISS △VOUT △VIN・△VOUT VIN △VOUT △Topr・△VOUT VIN=6.0V IOUT=40mA VIN=6.0V VOUT(E)≧4.57V VIN=6.0V 1mA≦IOUT≦100mA IOUT=100mA IOUT=200mA VIN=6.0V IOUT=40mA 6.0V≦VIN≦10.0V IOUT=40mA -40℃≦Topr≦85℃ NOTE: *1: VOUT(T) = Nominal output voltage. *2: VOUT(E) = Effective output voltage (i.e. the output voltage when “VOUT(T)+1.0V” is provided while maintaining a certain IOUT value). (*5) (*4) - VOUT1 } *3: Vdif = { VIN1 *4: VOUT1 = A voltage equal to 98% of the output voltage when a stabilized (VOUT(T) + 1.0V) is input. *5: VIN1 = The input voltage at the time VOUT1 is output input voltage has been gradually reduced. 5/24 XC6201 Series ■TYPICAL APPLICATION CIRCUIT (Tantalum) (Tantalum) With the XC6201 series regulator, in order to ensure the stabilized output voltage, we suggest that an output capacitor (CL) of 1μF or more be connected between the output pin (VOUT) and the VSS pin. For using low ESR capacitor (e.g. ceramic capacitors), please make sure that the output voltage is more than 1.7V. When the output voltage is from 1.3V to 1.6V, the output capacitor should be a tantalum capacitor with a capacitance of 2.2μF. We also suggest an input capacitor (CIN) should be connected between the VIN and the VSS in order to stabilize input power source. OUTPUT VOLTAGE CIN CL (TANTALUM) CL (LOW ESR) 1.3V~1.6V ≧1.0μF ≧2.2μF - 1.7V~6.0V ≧1.0μF ≧1.0μF ≧1.0μF VIN=1.8V~10V,VOUT=1.7~6.0V CIN=1.0μF(Ceramic),CL=1.0μF(ceramic) 6/24 XC6201 Series ■TEST CIRCUITS Circuit ① : Supply Current Circuit ② : Output Voltage, Oscillation, Line Regulation, Dropout Voltage, Load Regulation ■ NOTE ON USE 1. Please use this IC within the stated absolute maximum ratings. The IC is liable to malfunction should the ratings be exceeded. When a voltage higher than the VIN flows to the VOUT like when using two power supplies, please connect a Schottky barrier diode between the VOUT and the VIN and do not exceed the VOUT rating. 2. An oscillation may occur by the impedance between a power supply and the input of the IC. Where the impedance is 10Ω or more, please use an input capacitor (CIN) of at least 1μF. In case of high output current, operation can be stabilized by increasing the input capacitor value. Also an oscillation may occur if the input capacitor value is smaller than the input impedance when the output capacitance (CL) is large. In such cases, operations can be stabilized by either increasing the input capacitor value or reducing the output capacitor value. 3. Please ensure that output current (IOUT) is less than Pd / (VIN - VOUT) and do not exceed the rated power dissipation value (Pd) of the package. 7/24 XC6201 Series ■TYPICAL PERFORMANCE CHARACTERISTICS (1) Output Voltage vs. Output Current 8/24 XC6201 Series ■TYPICAL PERFORMANCE CHARACTERISTICS (Continued) (2) Output Voltage vs. Input Voltage XC6201P132 XC6201P182 XC6201P272 XC6201P132 XC6201P182 XC6201P272 9/24 XC6201 Series ■TYPICAL PERFORMANCE CHARACTERISTICS (Continued) (2) Output Voltage vs. Input Voltage (Continued) XC6201P332 XC6201P502 10/24 XC6201P332 XC6201P502 XC6201 Series ■TYPICAL PERFORMANCE CHARACTERISTICS (Continued) (3) Dropout Voltage vs. Output Current XC6201P132 XC6201P182 XC6201P272 XC6201P332 XC6201P502 11/24 XC6201 Series ■TYPICAL PERFORMANCE CHARACTERISTICS (Continued) (4) Supply Current vs. Input Voltage XC6201P132 XC6201P182 12/24 XC6201P132 XC6201 Series ■TYPICAL PERFORMANCE CHARACTERISTICS (Continued) (4) Supply Current vs. Input Voltage (Continued) XC6201P332 13/24 XC6201 Series ■TYPICAL PERFORMANCE CHARACTERISTICS (Continued) (5) Output Voltage vs. Ambient Temperature 14/24 XC6201 Series ■TYPICAL PERFORMANCE CHARACTERISTICS (Continued) (6) Supply Current vs. Ambient Temperature 15/24 XC6201 Series ■TYPICAL PERFORMANCE CHARACTERISTICS (Continued) (7) Input Transient Response XC6201P132 Time (1ms/div) Time (1ms/div) XC6201P272 XC6201P332 Time (1ms/div) Time (1ms/div) XC6201P502 Time (1ms/div) 16/24 XC6201P182 XC6201 Series ■TYPICAL PERFORMANCE CHARACTERISTICS (Continued) (8) Load Transient Response XC6201P132 Time (2ms/div) XC6201P272 Time (2ms/div) XC6201P182 Time (2ms/div) XC6201P332 Time (2ms/div) XC6201P502 Time (2ms/div) 17/24 XC6201 Series ■TYPICAL PERFORMANCE CHARACTERISTICS (Continued) (9) Ripple Rejection Rate XC6201P132 XC6201P272 XC6201P502 XC6201P502 (10) Output Noise Density XC6201P302 18/24 XC6201P182 XC6201P332 XC6201 Series ■PACKAGING INFORMATION ●SOT-25 Unit : mm 2.9±0.2 +0.1 0.4 -0.05 5 4 1 2 0.2MIN 2.8±0.2 1.6 +0.2 -0.1 0~0.1 3 0.15 (0.95) +0.1 -0.05 ●SOT-89 1.3MAX 1.1±0.1 1.9±0.2 Unit : mm 19/24 XC6201 Series ■PACKAGING INFORMATION (Continued) ●TO-92 Paper type ●USP-6B 20/24 Unit : mm Unit : mm Unit : mm Bag XC6201 Series ■PACKAGING INFORMATION (Continued) ●USP-6B Reference Pattern Layout ●USP-6B Reference Metal Mask Design 21/24 XC6201 Series ■MARKING RULE ●SOT-89, SOT-25 ② ④ ① ③ ① represents the product series MARK PRODUCT SERIES 1 XC6201Pxxxxx ② represents type of regulator 1 2 3 MARK VOLTAGE (V) SOT-89 5 0.1 ~ 3.0 (TOP VIEW) 6 3.1 ~ 6.0 5 4 ③ represents output voltage ① 1 ② ③ ④ 2 SOT-25 (TOP VIEW) 3 MARK OUTPUT VOLTAGE (V) MARK 0 - 3.1 - F 1.6 4.6 - 1 - 3.2 - H 1.7 4.7 - 2 - 3.3 - K 1.8 4.8 - 3 - 3.4 - L 1.9 4.9 - 4 - 3.5 - M 2.0 5.0 - 5 - 3.6 - N 2.1 5.1 - 6 - 3.7 - P 2.2 5.2 - 7 - 3.8 - R 2.3 5.3 - 8 - 3.9 - S 2.4 5.4 - 9 - 4.0 - T 2.5 5.5 - A - 4.1 - U 2.6 5.6 - B - 4.2 - V 2.7 5.7 - C 1.3 4.3 - X 2.8 5.8 - D 1.4 4.4 - Y 2.9 5.9 - E 1.5 4.5 - Z 3.0 6.0 - ④ represents assembly lot number 0 to 9, A to Z repeated (G, I, J, O, Q, W excluded) 22/24 OUTPUT VOLTAGE (V) XC6201 Series ■MARKING RULE (Continued) ●TO-92 ① represents type of regulator MARK PRODUCT SERIES P T XC6201Pxxxxx XC6201Txxxxx ②③ represents output voltage MARK (SIDE VIEW) (SIDE VIEW) ② ③ 3 5 3 0 VOLTAGE (V) PRODUCT SERIES 3.3 5.0 XC6201Px33xx XC6201Px50xx ④ represents detect voltage accuracy MARK DETECT VOLTAGE ACCURACY PRODUCT SERIES 1 Within ±1% XC6201Pxx1xx 2 Within ±2% XC6201Pxx2xx ⑤ represents least significant digit of production year MARK PRODUCTION YEAR 3 4 2003 2004 ⑥ represents the production lot number 0 to 9, A to Z repeated (G, I, J, O, Q, W excluded) Note: No character inversion used. ●USP-6B ①② represents product series MARK ① ② 0 1 PRODUCT SERIES XC6201xxxxDx ③ represents type of regulator USP-6B (TOP VIEW) MARK TYPE PRODUCT SERIES P 3pin Regulator XC6201PxxxDx T VIN=7V(Rated) XC6201TxxxDx ④⑤ represents output voltage MARK VOLTAGE (V) PRODUCT SERIES 3 3.3 XC6201x33xDx 0 5.0 XC6201x50xDx ④ ⑤ 3 5 ⑥ represents assembly lot number 0 to 9, A to Z repeated (G, I, J, O, Q, W excluded) Note: No character inversion used. 23/24 XC6201 Series 1. The products and product specifications contained herein are subject to change without notice to improve performance characteristics. Consult us, or our representatives before use, to confirm that the information in this datasheet is up to date. 2. We assume no responsibility for any infringement of patents, patent rights, or other rights arising from the use of any information and circuitry in this datasheet. 3. Please ensure suitable shipping controls (including fail-safe designs and aging protection) are in force for equipment employing products listed in this datasheet. 4. The products in this datasheet are not developed, designed, or approved for use with such equipment whose failure of malfunction can be reasonably expected to directly endanger the life of, or cause significant injury to, the user. (e.g. Atomic energy; aerospace; transport; combustion and associated safety equipment thereof.) 5. Please use the products listed in this datasheet within the specified ranges. Should you wish to use the products under conditions exceeding the specifications, please consult us or our representatives. 6. We assume no responsibility for damage or loss due to abnormal use. 7. All rights reserved. No part of this datasheet may be copied or reproduced without the prior permission of TOREX SEMICONDUCTOR LTD. 24/24