XC6210 Series
ETR0317_002
High Current, High Speed LDO Regulators
■GENERAL DESCRIPTION
The XC6210 series are precise, low noise, high current, positive voltage low dropout regulators. They are fabricated using
Torex’s CMOS process.
The series features a voltage reference, an error amplifier, a current limiter, and a phase compensation circuit plus a driver transistor.
With a low ON resistance driver transistor built into, batteries can be used until input-output voltage differential is minimal and
can accordingly be used for a longer time.
The series is also compatible with low ESR ceramic capacitors which give added output stability.
The output voltage of the LDO is selectable in 50mV increments within the range of 0.8V to 5.0V.
The current limiter's foldback circuit also operates as the output current limiter and the output pin protection.
The IC's internal regulator circuit can be placed in stand-by mode via the CE function. In the stand-by mode, power
consumption is greatly reduced.
■APPLICATIONS
●CD-ROMs, CD-R / RW drive
●DVD drive
●HDD drive
●Cameras, Video recorders
●Portable AV equipment
●Battery powered equipment
■TYPICAL APPLICATION CIRCUIT
■FEATURES
Maximum Output Current : More than 700mA
(800mA limit, TYP.)
(1.6V<VOUT(T)<5.0V)
Dropout Voltage
: 50mV @ 100mA
: 100mV @ 200mA
Operating Voltage Range : 1.5V ~ 6.0V
Output Voltage Range
: 0.8V ~ 5.0V
(50mV increments)
Highly Accurate
: +2%
(The setting voltage accuracy)
Low Power Consumption : 35μA (TYP.)
High Ripple Rejection
: 60dB @1kHz
Operational Ambient Temperature
: - 40℃ ~ 85℃
CMOS
Low ESR Capacitor Compatible
Ultra Small Packages
: SOT-25 (SOT-23-5)
SOT-89-5
USP-6B
■TYPICAL PERFORMANCE
CHARACTERISTICS
●Dropout Voltage vs. Output Current
1/22
XC6210 Series
■PIN CONFIGURATION
VOUT
5
VOUT
NC
4
VIN
5
2
1
3
VIN VSS CE
1
4
2
CE VSS
SOT-25 (TOP VIEW)
3
NC
USP-6B
(BOTTOM VIEW)
SOT-89-5 (TOP VIEW)
*The dissipation pad for the
USP-6B package should be
solder-plated in recommended
mount pattern and metal masking
so as to enhance mounting
strength and heat release. If the
pad needs to be connected to
other pins, it should be connected
to the VSS pins.
■PIN ASSIGNMENT
PIN NUMBER
SOT-89-5
1
4
2
5
3
SOT-25
3
1
2
5
4
USP-6B
1
3
4
5
2, 6
PIN NAME
FUNCTION
CE
VIN
VSS
VOUT
NC
ON/OFF Control
Power Input
Ground
Output
No Connection
■PRODUCT CLASSIFICATION
●Selection Guide
CE Input Logic, Internal Pull-Up / Down Resistor
SERIES
CE INPUT LOGIC
XC6210A
High Active with Pull-Down Resistor
XC6210B
High Active with No Pull-Down Resistor
XC6210C
XC6210D
Low Active with Pull-Up Resistor
Low Active with No Pull-Up Resistor
●Ordering Information
XC6210 ①②③④⑤⑥
DESIGNATOR
①
DESRIPTION
②
CE Pin Functions
③
Output Voltage
SYMBOL
A
: High Active with pull-down resistor
B
: High Active with no pull-down resistor
C
: Low Active with pull-up resistor
D
: Low Active with no pull-up resistor
08~50
2
④
Output Voltage Accuracy
A
⑤
⑥
2/22
Packages
Device Orientation
DESCRIPTION
: ex.) 3.0V → ②=3, ③=0
: 100mV increments, +2% (VOUT<1.5V→less than +30mV)
ex.) 2.80V→②=2, ③=8, ④=2
: 50mV increments, +2% (VOUT<1.5V→less than +30mV)
ex.) 2.85V→②=2, ③=8, ④=A
M
: SOT-25 (SOT-23-5)
P
: SOT-89-5
D
: USP-6B
R
: Embossed tape, standard feed
L
: Embossed tape, reverse feed
XC6210
Series
■BLOCK DIAGRAM
■ABSOLUTE MAXIMUM RATINGS
Ta=25℃
PARAMETER
SYMBOL
RATINGS
UNITS
Input Voltage
VIN
6.5
V
Output Current *
IOUT
900
mA
Output Voltage
VOUT
VSS -0.3 ~ VIN +0.3
V
CE Pin Voltage
VCE
VSS -0.3 ~ 6.5
V
SOT-25
Power Dissipation
SOT-89-5
250
Pd
USP-6B
500
mW
100
Operating Temperature Range
Topr
- 40 ~ + 85
℃
Storage Temperature Range
Tstg
- 55 ~ + 125
℃
* IOUT=Pd / (VIN – VOUT)
3/22
XC6210 Series
■ELECTRICAL CHARACTERISTICS
●XC6210 series
Ta=25℃
PARAMETER
SYMBOL
Output Voltage (*2), (*3)
VOUT(E)
Maximum Output Current
[VOUT(E)>1.6V]
Maximum Output
Current [VOUT(E)<1.5V]
Load Regulation
IOUTMAX
IOUTMAX
△VOUT
Dropout Voltage (*4)
CONDITIONS
VIN=VOUT(T)+1.0V, IOUT=30mA
x 0.98
VCE=ON (VIN or VSS)
VOUT(T)<1.5V, IOUT=30mA
(-30mV)
VCE=ON (VIN or VSS)
VIN=VOUT(T)+1.0V,
700
VCE=ON (VIN or VSS)
VIN=VOUT(T)+1.0V,
500
VCE=ON (VIN or VSS)
1mA<IOUT<100mA, VCE=ON(VIN or VSS)
-
VOUT(T)
(+30mV)
-
-
-
-
15
60
IROUT=100mA, VCE=ON (VIN or VSS)
E-2
IDD
35
55
E-3
①
mV
①
mV
①
μA
②
35
55
-
0.10
μA
②
-
0.01
0.20
%/V
①
1.5
-
6.0
V
-
IOUT=30mA, VCE=ON (VIN or VSS)
-40℃≦Topr≦85℃
-
±100
-
ppm/
℃
①
PSRR
VIN=[VOUT(T)+1.0]VDC+0.5Vp-pAC
When VOUT(T)>4.75V
→ VIN=5.75VDC+0.5Vp-pAC
VCE=ON (VIN or VSS), IOUT=30mA,
f=1kHz
-
60
-
dB
③
Ilim
VIN=VOUT(T)+1.0V, VCE=ON(VIN or VSS)
700
800
mA
①
-
800
mA
①
V
①
μA
①
μA
①
VIN=VOUT(T)+1.0V, VCE=ON(VIN or VSS)
Ishort
VIN=VOUT(T)+1.0V, VCE=ON(VIN or VSS)
-
50
-
CE “High” Level Voltage
VCEH
-
1.3
-
6.0
CE “Low” Level Voltage
CE “High” Level
Current (A type)
CE “High” Level
Current (B / C / D type)
CE “Low” Level Current
(C type)
CE “Low” Level Current
(A / B / D type)
VCEL
-
-
-
0.25
E-4
-
E-4
ICEH
VIN=VCE=VOUT(T)+1.0V
- 0.10
-
0.10
E-5
-
E-5
- 0.10
-
0.10
ICEL
VIN=VOUT(T)+1.0V, VCE=VSS
NOTE:
*1: Unless otherwise stated, VIN=VOUT(T)+1.0V
*2: VOUT(T)=Specified output voltage
*3: VOUT(E)=Effective output voltage
(i.e. the output voltage when " VOUT(T)+1.0V" is provided while maintaining a certain IOUT value).
}
*5: A voltage equal to 98% of the output voltage whenever a stabilized VOUT1=IOUT{VOUT(T)+1.0V} is input.
*6: VIN1= the input voltage when VOUT1, which appears as input voltage is gradually decreased.
*7: VOUT(T)<1.50V
MIN. : VOUT(T) - 30mV, MAX. : VOUT(T) +30mV
*8: CE conditions:
XC6210A / B type: ON=VIN, OFF=VSS
XC6210C / D type: ON=VSS, OFF=VIN
4/22
mA
-
Ilim
(*5)
①
-0.10
VOUT(T)+1.0V≦VIN≦6.0V
△VOUT
When VOUT(T)≧4.5V, 5.5V≦VIN≦6.0V
△Topr･VOUT
VCE=ON (VIN or VSS), IOUT=30mA
VIN
-
-VOUT1
V
VIN=6.0V,CE=OFF(VIN or VSS)
Current Limiter
[VOUT(E)>1.6V]
Current Limiter
[VOUT(E)<1.5V]
Short-Circuit Current
(*6)
CIRCUIT
VIN=VOUT(T)+1.0V, VCE=VSS
ISTBY
Output Voltage
△VOUT
Temperature Characteristics △Topr・△VOUT
*4: Vdif ={VIN1
UNITS
E-3
-
VIN=VOUT(T)+1.0V, VCE=VSS
Supply Current (D type)
Ripple Rejection Rate
x 1.02
Vdif2
VIN=VCE=VOUT(T)+1.0V
Input Voltage
VOUT(T)
E-1
VIN=VCE=VOUT(T)+1.0V
Line Regulation
MAX.
IROUT=30mA, VCE=ON (VIN or VSS)
Supply Current (A type)
Stand-by Current
TYP.
Vdif1
Supply Current (B type)
Supply Current (C type)
MIN.
XC6210
Series
■VOLTAGE CHART
●Dropout Voltage, Supply Current, CE “H / L” Level Current Chart
Ta=25℃
E-1
E-2
E-3
E-4
E-5
DROPOUT
VOLTAGE 1
(IOUT=30mA)
DROPOUT
VOLTAGE 2
(IOUT=100mA)
SUPPLY
CURRENT
CE “H” LEVEL
CURRENT
CE “L” LEVEL
CURRENT
SETTING
OUTPUT
VOLTAGE
OUTPUT
VOLTAGE
(Accuracy: 2%)
(V)
(V)
(mV)
(mV)
(μA)
(μA)
(μA)
VOUT
Vdif1
Vdif2
IDD
ICEH
ICEL
VOUT(T)
0.80
0.85
0.90
0.95
1.00
1.05
1.10
1.15
1.20
1.25
1.30
1.35
1.40
1.45
1.50
1.55
1.60
1.65
1.70
1.75
1.80
1.85
1.90
1.95
2.00
2.05
2.10
2.15
2.20
2.25
2.30
2.35
2.40
2.45
2.50
2.55
2.60
2.65
2.70
2.75
2.80
2.85
2.90
2.95
MIN.
MAX.
0.770
0.820
0.870
0.920
0.970
1.020
1.070
1.120
1.170
1.220
1.270
1.320
1.370
1.420
1.470
1.519
1.568
1.617
1.666
1.715
1.764
1.813
1.862
1.911
1.960
2.009
2.058
2.107
2.156
2.205
2.254
2.303
2.352
2.401
2.450
2.499
2.548
2.597
2.646
2.695
2.744
2.793
2.842
2.891
0.830
0.880
0.930
0.980
1.030
1.080
1.130
1.180
1.230
1.280
1.330
1.380
1.430
1.480
1.530
1.581
1.632
1.683
1.734
1.785
1.836
1.887
1.938
1.989
2.040
2.091
2.142
2.193
2.244
2.295
2.346
2.397
2.448
2.499
2.550
2.601
2.652
2.703
2.754
2.805
2.856
2.907
2.958
3.009
TYP.
MAX.
TYP.
700.0
100.0
MAX.
MIN.
MAX.
MIN.
MAX.
38.0
60.0
1.50
5.00
-5.00
-1.50
38.5
61.5
2.00
6.50
-6.50
-2.00
700.0
500.0
50.0
TYP.
800.0
250.0
600.0
30.0
MAX.
600.0
150.0
400.0
500.0
300.0
400.0
200.0
100.0
100.0
300.0
250.0
27.0
41.0
90.0
135.0
39.0
63.0
2.50
8.00
-8.00
-2.50
25.0
37.0
80.0
120.0
39.5
64.5
3.00
9.50
-9.50
-3.00
18.0
28.0
60.0
90.0
40.0
66.0
3.50
11.00
-11.00
-3.50
5/22
XC6210 Series
■VOLTAGE CHART (Continued)
●Dropout Voltage, Supply Current, CE “H / L” Level Current Chart
Ta=25℃
E-1
E-2
E-3
E-4
E-5
DROPOUT
VOLTAGE 1
(IOUT=30mA)
DROPOUT
VOLTAGE 2
(IOUT=100mA)
SUPPLY
CURRENT
CE “H” LEVEL
CURRENT
CE “L” LEVEL
CURRENT
VOLTAGE
OUTPUT
VOLTAGE
(Accuracy: 2%)
(V)
(V)
(mV)
(mV)
(μA)
(μA)
(μA)
VOUT
Vdif1
Vdif2
IDD
ICEH
ICEL
SETTING
OUTPUT
VOUT(T)
3.00
3.05
3.10
3.15
3.20
3.25
3.30
3.35
3.40
3.45
3.50
3.55
3.60
3.65
3.70
3.75
3.80
3.85
3.90
3.95
4.00
4.05
4.10
4.15
4.20
4.25
4.30
4.30
4.40
4.45
4.50
4.55
4.60
4.65
4.70
4.75
4.80
4.85
4.90
4.95
5.00
6/22
MIN.
MAX.
2.940
2.989
3.038
3.087
3.136
3.185
3.234
3.283
3.332
3.381
3.430
3.479
3.528
3.577
3.626
3.675
3.724
3.773
3.822
3.871
3.920
3.969
4.018
4.067
4.116
4.165
4.214
4.214
4.312
4.361
4.410
4.459
4.508
4.557
4.606
4.655
4.704
4.753
4.802
4.851
4.900
3.060
3.111
3.162
3.213
3.264
3.315
3.366
3.417
3.468
3.519
3.570
3.621
3.672
3.723
3.774
3.825
3.876
3.927
3.978
4.029
4.080
4.131
4.182
4.233
4.284
4.335
4.386
4.386
4.488
4.539
4.590
4.641
4.692
4.743
4.794
4.845
4.896
4.947
4.998
5.049
5.100
TYP.
MAX.
TYP.
MAX.
TYP.
MAX.
MIN.
MAX.
MIN.
MAX.
15.0
23.0
50.0
75.0
40.5
67.5
4.00
12.50
-12.50
-4.00
15
23
50
75
41.0
69.0
4.40
14.00
-14.00
-4.40
41.5
70.5
4.85
15.50
-15.50
-4.85
42.0
72.0
5.30
17.00
-17.00
-5.30
15.0
23.0
50.0
75.0
XC6210
Series
■TEST CIRCUITS
●Circuit ①
VIN
CIN
VIN
V
CE
V
VOUT
A
VSS
CL
VCE
RL
R
L
●Circuit ②
VIN
A
CE
VOUT
VSS
●Circuit ③
VIN
VIN={VOUT+1.0V}VDC+0.5Vp-pAC
VOUT>4.75V
VOUT≧4.75V
VIN=5.75VDC+0.5Vp-pAC
V
CE
VOUT
IOUT=30mA
VSS
CL
V
●Output Capacitor Corresponding Chart
VR OUTPUT VOLTAGE
CL
0.8V~1.45V
More than 6.8μF
1.5V ~ 1.75V
More than 4.7μF
1.8V ~ 5.0V
More than 1.0μF
7/22
XC6210 Series
■OPERATIONAL EXPLANATION
<Output Voltage Regulator Control>
The voltage, divided by resistors R1 & R2, which are connected to the VOUT pin is compared with the internal reference
voltage by the error amplifier. The P-channel MOSFET, which is connected to the VOUT pin, is then driven by the
subsequent output signal. The output voltage at the VOUT pin is controlled & stabilized by negative feedback. The
constant current limit circuit and short circuit protection operate in relation to the level of output current.
<Low ESR Capacitor>
With the XC6210 series regulator, a stable output voltage is achievable even if low ESR capacitors are used, as a phase
compensation circuit is built into the regulator. In order to ensure the effectiveness of the phase compensation, we
suggest that an output capacitor (CL) be connected as close as possible, between the output pin (VOUT) and the VSS pin.
Please use an output capacitor (CL) with a capacitance, based on the chart below. We also suggest an input capacitor
(CIN) of 1μF: this should be connected between VIN and VSS in order to stabilize input power source.
Output Capacitor Corresponding Chart
VOUT
CL
0.8V ~ 1.45V
More than 6.8μF
1.5V ~ 1.75V
More than 4.7μF
1.8V ~ 5.0V
More than 1.0μF
<Current Limiter, Short-Circuit Protection>
The XC6210 series regulator offers a combination of current limit and short circuit protection by means of a built-in fixed
current limiter circuit and a foldback circuit. When the load current reaches the current limit level, the fixed current
limiter circuit operates and output voltage drops. As a result of this drop in output voltage, the foldback circuit operates,
the output voltage drops further and output current decreases. When the output pin is shorted, a current of about 50mA
flows.
<CE Pin>
The IC's internal regulator circuitry can be shut down via the signal from the CE pin with the XC6210 series. In
shutdown mode, output at the VOUT pin will be pulled down to the VSS level via R1 & R2. Options are available for the
CE pin logic (See the product classification). Note that as the XC6210B types are 'High Active / No Pull-Down',
operations will become unstable with the CE pin open. Although the CE pin is equal to an inverter input with CMOS
hysteresis, with either the pull-up or pull-down options, the CE pin input current will increase when the IC is in operation.
We suggest that you use this IC with either a VIN voltage or a VSS voltage input at the CE pin. If this IC is used with the
correct specifications for the CE pin, the IC will operate normally. However, supply current may increase as a result of
through current in the IC's internal circuitry if a voltage other than VIN or VSS is applied.
■NOTES ON USE
1. Please use this IC within the stated absolute maximum ratings. The IC is liable to malfunction should the ratings be
exceeded.
2. Where wiring impedance is high, operations may become unstable due to noise and/or phase lag depending on output
current. Please strengthen VIN and VSS wiring in particular.
3. Please wire the input capacitor (CIN) and the output capacitor (CL) as close to the IC as possible. Should rapid input
fluctuation or load fluctuation occur, please increase the capacitor value such as CIN or CL to stabilize the operation.
8/22
XC6210
Series
■TYPICAL PERFORMANCE CHARACTERISTICS
(1) Output Voltage vs. Output Current
9/22
XC6210 Series
■TYPICAL PERFORMANCE CHARACTERISTICS (Continued)
(2) Output Voltage vs. Input Voltage
10/22
XC6210
Series
■TYPICAL PERFORMANCE CHARACTERISTICS (Continued)
(3) Dropout Voltage vs. Output Current
11/22
XC6210 Series
■TYPICAL PERFORMANCE CHARACTERISTICS (Continued)
(4) Supply Current vs. Input Voltage
(5) Output Voltage vs. Ambient Temperature
12/22
XC6210
Series
■TYPICAL PERFORMANCE CHARACTERISTICS (Continued)
(6) Supply Current vs. Ambient Temperature
(7) CE Pin Threshold Voltage vs. Ambient Temperature
13/22
XC6210 Series
■TYPICAL PERFORMANCE CHARACTERISTICS (Continued)
(8) Input Transient Response 1
14/22
XC6210
Series
■TYPICAL PERFORMANCE CHARACTERISTICS (Continued)
(9) Load Transient Response
15/22
XC6210 Series
■TYPICAL PERFORMANCE CHARACTERISTICS (Continued)
(10) Ripple Rejection Rate
16/22
XC6210
Series
■TYPICAL PERFORMANCE CHARACTERISTICS (Continued)
(11) Input Transient Response 2
17/22
XC6210 Series
■PACKAGING INFORMATION
●SOT-25 (SOT-23-5)
●SOT-89-5
●USP-6B
* Pin no. 1 is thicker than other pins.
18/22
XC6210
Series
■PACKAGING INFORMATION (Continued)
●USP-6B Recommended Pattern Layout
●USP-6B Recommended Metal Mask Design
19/22
XC6210 Series
■MARKING RULE
●SOT-25
①Represents product series
MARK
PRODUCT SERIES
0
XC6210xxxxxx
②Represents CE function
MARK
PRODUCT SERIES
VOLTAGE=
VOLTAGE=
VOLTAGE=
VOLTAGE=
0.1~3.0V
3.1~6.0V
0.15~3.05V
3.15~6.05V
V
A
E
L
XC6210Axxxxx
X
B
F
M
XC6210Bxxxxx
Y
C
H
N
XC6210Cxxxxx
Z
D
K
P
XC6210Dxxxxx
●SOT-89-5
③Represents output voltage
MARK
SOT-89-5
(TOP VIEW)
OUTPUT VOLTAGE (V)
MARK
OUTPUT VOLTAGE (V)
0
-
3.1
-
3.15
F
1.6
4.6
1.65
4.65
1
-
3.2
-
3.25
H
1.7
4.7
1.75
4.75
2
-
3.3
-
3.35
K
1.8
4.8
1.85
4.85
3
-
3.4
-
3.45
L
1.9
4.9
1.95
4.95
4
-
3.5
-
3.55
M
2.0
5.0
2.05
-
5
-
3.6
-
3.65
N
2.1
-
2.15
-
6
-
3.7
-
3.75
P
2.2
-
2.25
-
7
0.8
3.8
-
3.85
R
2.3
-
2.35
-
8
0.9
3.9
0.85
3.95
S
2.4
-
2.45
-
9
1.0
4.0
0.95
4.05
T
2.5
-
2.55
-
A
1.1
4.1
1.15
4.15
U
2.6
-
2.65
-
B
1.2
4.2
1.25
4.25
V
2.7
-
2.75
-
C
1.3
4.3
1.35
4.35
X
2.8
-
2.85
-
D
1.4
4.4
1.45
4.45
Y
2.9
-
2.95
-
E
1.5
4.5
1.55
4.55
Z
3.0
-
3.05
-
④Represents production lot number
0 to 9, A to Z reverse character 0 to 9, A to Z repeated (G, I, J, O, Q, W excepted)
20/22
XC6210
Series
■MARKING RULE (Continued)
●USP-6B
①②Represents product series
MARK
①
②
1
0
PRODUCT SERIES
XC6210xxxxxx
③Represents CE Function
USP-6B
(TOP VIEW)
MARK
TYPE
PRODUCT SERIES
A
High Active With Pull-Down Resistor
XC6210AxxxDx
B
High Active With No Pull-Down Resistor
XC6210AxxxDx
C
Low Active With Pull-Up Resistor
XC6210AxxxDx
D
Low Active With No Pull-Up Resistor
XC6210AxxxDx
S
Custom
XC6210AxxxDx
④Represents the integer number of output voltage
MARK
VOLTAGE (V)
PRODUCT SERIES
3
3.3
XC6210x3xxDx
5
5.0
XC6210x5xxDx
⑤Represents the decimal point of output voltage
MARK
0
VOLTAGE
PRODUCT
(V)
SERIES
x.0
XC6210xx02Dx
VOLTAGE
PRODUCT
(V)
SERIES
A
x.05
XC6210xx0ADx
MARK
1
x.1
XC6210xx12Dx
B
x.15
XC6210xx1ADx
2
x.2
XC6210xx22Dx
C
x.25
XC6210xx2ADx
3
x.3
XC6210xx32Dx
D
x.35
XC6210xx3ADx
4
x.4
XC6210xx42Dx
E
x.45
XC6210xx4ADx
5
x.5
XC6210xx52Dx
F
x.55
XC6210xx5ADx
6
x.6
XC6210xx62Dx
H
x.65
XC6210xx6ADx
7
x.7
XC6210xx72Dx
K
x.75
XC6210xx7ADx
8
x.8
XC6210xx82Dx
L
x.85
XC6210xx8ADx
9
x.9
XC6210xx92Dx
M
x.95
XC6210xx9ADx
⑥Represents production lot number
0 to 9, A to Z repeated (G, I, J, O, Q, W, excepted)
Note: No character inversion used.
21/22
XC6210 Series
1. The products and product specifications contained herein are subject to change without
notice to improve performance characteristics.
Consult us, or our representatives
before use, to confirm that the information in this catalog is up to date.
2. We assume no responsibility for any infringement of patents, patent rights, or other
rights arising from the use of any information and circuitry in this catalog.
3. Please ensure suitable shipping controls (including fail-safe designs and aging
protection) are in force for equipment employing products listed in this catalog.
4. The products in this catalog are not developed, designed, or approved for use with such
equipment whose failure of malfunction can be reasonably expected to directly
endanger the life of, or cause significant injury to, the user.
(e.g. Atomic energy; aerospace; transport; combustion and associated safety
equipment thereof.)
5. Please use the products listed in this catalog within the specified ranges.
Should you wish to use the products under conditions exceeding the specifications,
please consult us or our representatives.
6. We assume no responsibility for damage or loss due to abnormal use.
7. All rights reserved. No part of this catalog may be copied or reproduced without the
prior permission of Torex Semiconductor Ltd.
22/22