440 440-072 EMI/RFI Dual Banding Adapter Self-Locking Rotatable Coupling - Standard Profile 440 F S 072 NF 16 12-8 K P CONNECTOR DESIGNATORS A-F-H-L-S Product Series Polysulfide (Omit for none) Connector Designator B = 2 Bands K = 2 Precoiled Bands (Omit for none) Angle and Profile H = 45 J = 90 S = Straight SELF-LOCKING ROTATABLE COUPLING Length: S only (1/2 inch increments, e.g. 8 = 4.000 inches) Basic Part No. Cable Entry (Table IV) Finish (Table II) Length ± .060 (1.52) Min. Order Length 2.0 inch Shell Size (Table I) A Thread (Table I) Length ± .060 (1.52) Min. Order Length 1.5 Inch (See Note 3) E Typ. (Table I) K* L* M* * (Table IV) STYLE 2 (STRAIGHT See Note 1) Anti-Rotation Device (Typ.) .060 (1.5) Typ. .380 (9.7) Typ. 1.00 (25.4) Max F H (Table III) (Table III) G (Table III) STYLE 2 (45° & 90° See Note 1) J (Table III) Termination Areas Free of Cadmium. Knurl or Ridges Mfr's Option Band Option (K Option Shown See Note 4) © 2005 Glenair, Inc. Polysulfide Stripes P Option CAGE Code 06324 Printed in U.S.A. GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 E-Mail: [email protected] Series 440 - Page 38 www.glenair.com 440 440-072 EMI/RFI Dual Banding Adapter Self-Locking Rotatable Coupling - Standard Profile See inside back cover fold-out or pages 13 and 14 for Tables I and II. TABLE III: ELBOW DIMENSIONS Shell Size Conn. Desig. H A-F-L-S 09 08 11 10 13 12 15 14 17 16 19 18 21 20 23 22 25 24 F Max .795 (20.2) .820 (20.8) .844 (21.4) .861 (21.9) .888 (22.6) .904 (23.0) .929 (23.6) .956 (24.3) .979 (24.9) G Max 1.328 (33.7) 1.358 (34.5) 1.378 (35.0) 1.408 (35.8) 1.428 (36.3) 1.438 (36.5) 1.458 (37.0) 1.498 (38.0) 1.528 (38.8) TABLE IV: CABLE ENTRY M K L Dash Dia Dia Dia No. .312 (7.9) .125 (3.2) .250 (6.4) 02 .375 (9.5) .188 (4.8) .312 (7.9) 03 .438 (11.1) .250 (6.4) .375 (9.5) 04 .500 (12.7) .312 (7.9) .438 (11.1) 05 .562 (14.3) .375 (9.5) .500 (12.7) 06 .625 (15.9) .438 (11.1) .562 (14.3) 07 .688 (17.5) .500 (12.7) .625 (15.9) 08 .750 (19.1) .562 (14.3) .688 (17.5) 09 .812 (20.6) .625 (15.9) .750 (19.1) 10 .875 (22.2) .688 (17.5) .812 (20.6) 11 .938 (23.8) .750 (19.1) .875 (22.2) 12 .812 (20.6) .938 (23.8) 1.000 (25.4) 13 .875 (22.2) 1.000 (25.4) 1.062 (27.0) 14 .938 (23.8) 1.062 (27.0) 1.125 (28.6) 15 16 1.000 (25.4) 1.125 (28.6) 1.188 (30.2) 17 1.062 (27.0) 1.188 (30.2) 1.250 (31.8) 18 1.125 (28.6) 1.250 (31.8) 1.312 (33.3) 20 1.250 (31.8) 1.375 (34.9) 1.438 (36.5) 22 1.375 (34.9) 1.500 (38.1) 1.562 (39.7) 24 1.500 (38.1) 1.625 (41.3) 1.688 (42.9) © 2005 Glenair, Inc. CAGE Code 06324 H Max .906 (23.0) .966 (24.5) 1.026 (26.1) 1.076 (27.3) 1.136 (28.9) 1.176 (29.9) 1.236 (31.4) 1.296 (32.9) 1.356 (34.4) J Max 1.438 (36.5) 1.498 (38.0) 1.558 (39.6) 1.628 (41.4) 1.688 (42.9) 1.708 (43.4) 1.768 (44.9) 1.848 (46.9) 1.918 (48.7) 1. When maximum cable entry (page 21) is exceeded, Style 2 will be supplied. Dimensions F, G, H and J will not apply. Please consult factory. 2. Metric dimensions (mm) are indicated in parentheses. 3. Consult factory for shorter lengths on straight backshells. 4. Backshells supplied with 600-052-* band, see Glenair Series 600 Tool Catalog for installation. Printed in U.S.A. GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 E-Mail: [email protected] Series 440 - Page 39 www.glenair.com