TOREX XC6404

XC6404 Series
High Current, High Speed LDO Regulators, Voltage Detector Function
! Low Power Consumption
! Dropout Voltage
! APPLICATIONS
: 35 µA (TYP.)
: 200mV @ 100mA
: 400mV @ 200mA
! Maximum Output Current
: more than 500mA (600mA limit)
!
!
!
!
: ± 2%
(2.5V<VROUT<4.9V)
Highly Accurate
October 1, 2003 V6
VR Setting Output Voltage Range
: 0.9V ~ 5.1V
Detect Voltage Setting Range
Low ESR capacitor compatible
: 0.9V ~ 5.5V (VIN : >2.0V)
! GENERAL DESCRIPTION
"
"
"
"
"
"
CD-ROM, CD-R/RW drive
DVD drive
HDD drive
Cameras, Video recorders
Portable AV equipment
Battery powered equipment
! FEATURES
The XC6404 series are highly precise, low noise, high current, positive
voltage low dropout regulators with built-in voltage detector. They are
fabricated using Torex’s CMOS process. Performance features of the
series includes high ripple rejection and low dropout voltage, and the
series features a voltage reference, an error amplifier, a current limiter
and a phase compensation circuit plus a driver transistor.
Detect voltage is selectable in 100mV increments within the range of
0.9V to 5.5V and the LDO output voltage is selectable within a range of
0.9V to 5.1V, also in 100mV increments.
The series is also compatible with low ESR ceramic capacitors which
give added output stability. This stability can be maintained even during
load fluctuations due to the excellent transient response of the series.
The current limiter's foldback circuit also operates as a short circuit
protection for the output current limiter and the output pin.
The series provides options to the user to select from a variety of circuit
features, such as detector monitoring, detector output logic, CE and EN
pin input logic, internal pull-up / down resistance, and power ready.
The IC's internal regulator circuit can be placed in stand-by mode via the
EN function (XC6404 A to C series). The whole IC can be put in to
stand-by mode via the CE function with the XC6404D series (semicustom). In the stand-by mode, power consumption is greatly reduced.
The XC6404A and B series features the toggle operation function. The
regulator output can be OFF when the XC6404B series detects voltage
(semi-custom).
The XC6404E series can monitor another power source by using the
VSEN pin (semi-custom).
The XC6404F series can delay the detector output: the delay time can be
controlled by the use of an external capacitor (semi-custom).
Maximum Output Current
more than 500mA
(600mA limit)
(2.5V<VROUT<4.9V)
Dropout Voltage
200mV (IROUT=100mA)
Operating Voltage Range
2.0V ~ 6.0V
VR Setting Output Voltage Range
0.9V ~ 5.1V
(100mV step, ± 2%)
Detect Voltage Setting Range
0.9V ~ 5.5V
(100mV step, ± 2%)
When monitoring VIN
more than 2.0V
VR.VD Temperature Coefficient
±100ppm/OC (TYP.)
Low Power Consumption
35µA (TYP.)
High Ripple Rejection
65dB (@10kHz)
Ultra Small Packages
SOT-25 (SOT-23-5)
SOT-89-5
- 40 ~ 85OC
Operating Temperature Range
Low ESR Capacitor Compatible
! TYPICAL APPLICATION CIRCUITS
CIN
1uF
1
2
VROUT
3
CL
VIN
EN/CE
5
CIN
1uF
VSS
VROUT
VDOUT
Rpull-up
200K
Rpull-up
200K
4
XC6404A ~ D Series
1
5
VIN
VSEN
2
VROUT
3
CL
VSS
VROUT
VDOUT
4
CIN
1uF
1
VIN
2
VSS
VROUT
3
Cd
VROUT
VDOUT
Rpull-up
200K
5
VDOUT
4
Cd
XC6404E Series
XC6404F Series
Semiconductor Ltd.
Data Sheet
1
XC6404 Series
High Current, High Speed LDO Regulators, Voltage Detector Function
! PIN CONFIGURATION
1
VIN
EN/CE
VSEN/Cd
VDOUT
4
VROUT
5
VDOUT
5
2
VSS
3
EN/CE
VSEN/Cd
SOT-25 (TOP VIEW)
1
4
2
3
VIN
VSS VROUT
SOT-89-5 (TOP VIEW)
! PIN ASSIGNMENT
PIN NUMBER
SOT-89-5
SOT-25
PIN NAME
FUNCTION
Power Input
1
1
VIN
2
2
VSS
Ground
3
5
EN
VR ON / OFF Control
3
5
CE
ON / OFF Control
3
5
VSEN
VD Monitoring
3
5
Cd
Delay Capacitor Connection
4
4
VDOUT
VD Output
5
3
VROUT
VR Output
! SELECTION GUIDE
1. TOGGLE FUNCTION, VD SELF-SATURATION AS OPTION
TOGGLE FUNCTION (BUILT-IN)
SERIES
XC6404A
VD with Toggle Function
XC6404B
VD with Toggle Function and Self-Saturation
XC6404C ~ F
VD with no Toggle Function
2. STAND-BY MODE FUNCTION AS OPTION
SERIES
STAND-BY MODE FUNCTION
XC6404A ~ C
VR with Stand-by mode function
XC6404D
Chip Stand-by mode function
XC6404E, F
No Stand-by mode function
3. CE / EN INPUT LOGIC, INTERNAL PULL-UP/DOWN AS OPTION (* : A ~ D Series)
CE INPUT LOGIC
SERIES
XC6404 * A ~ D
Active HIGH with pull down
XC6404 * E ~ K
Active HIGH with no pull down
XC6404 * L ~ P
Active LOW with pull up
XC6404 * R ~ U
Active LOW with no pull up
4. VD SENSE AS OPTION
SERIES
(* : A ~ D and F Series)
VD SENSE PIN
XC6404 * A, B, E, F, L, M, R, S, V, X
VIN
XC6404 * C, D, H, K, N, P, T, U, Y, Z
VOUT
XC6404 E V ~ Z
VSEN
5. VD OUTPUT LOGIC AS OPTION
SERIES
VD OUTPUT LOGIC FUNCTION
XC6404A ~ F
Detect L or Detect H
6. VD DELAY FUNCTION AS OPTION
SERIES
DELAY FUNCTION
XC6404A ~ E
XC6404F
No Delay
Delay time adjustable by connecting Cd
Semiconductor Ltd.
Data Sheet
2
XC6404 Series
High Current, High Speed LDO Regulators, Voltage Detector Function
! ORDERING INFORMATION
XC6404 123456
PIN NUMBER
PIN NUMBER
FUNCTION
FUNCTION
Packaging Types:
Optional Functions :
A : Toggle and EN Function (Preliminary *)
M : SOT-25
B : Toggle, EN Function,
VD signal/VR OFF function (Preliminary *)
1
5
C : EN Function
P : SOT-89-5
D : CE Function
E : VSEN Pin
F : Cd Pin
Types :
2
As in the chart below.
Taping Direction:
Internally set sequential number relating to output
voltage and detect voltage (refer to the chart on page
4.)
R: Embossed Tape, Standard feed
6
34
VR Setting Output Voltage Range : 0.9V ~ 5.1V
L : Embossed Tape, Reverse feed
Detect Voltage Setting Range : 0.9V ~ 5.5V
100mV step increments are available
PIN NUMBER : 2 Types
2
EN / CE FUNCTION
EN / CE LOGIC
PULL UP/DOWN
RESISTANCE
VD SENSE PIN
VD OUTPUT LOGIC
A
Function
Active HIGH
Pull-down Function
VIN
Detect L
B
Function
Active HIGH
Pull-down Function
VIN
Detect H
C
Function
Active HIGH
Pull-down Function
VROUT
Detect L
D
Function
Active HIGH
Pull-down Function
VROUT
Detect H
E
Function
Active HIGH
Nonfunctional
VIN
Detect L
F
Function
Active HIGH
Nonfunctional
VIN
Detect H
H
Function
Active HIGH
Nonfunctional
VROUT
Detect L
K
Function
Active HIGH
Nonfunctional
VROUT
Detect H
L
Function
Active LOW
Pull-up Function
VIN
Detect L
M
Function
Active LOW
Pull-up Function
VIN
Detect H
N
Function
Active LOW
Pull-up Function
VROUT
Detect L
P
Function
Active LOW
Pull-up Function
VROUT
Detect H
R
Function
Active LOW
Nonfunctional
VIN
Detect L
S
Function
Active LOW
Nonfunctional
VIN
Detect H
T
Function
Active LOW
Nonfunctional
VROUT
Detect L
U
Function
Active LOW
Nonfunctional
VROUT
Detect H
V
Nonfunctional
-
-
VIN / VSEN
Detect L
X
Nonfunctional
-
-
VIN / VSEN
Detect H
Y
Nonfunctional
-
-
VROUT
Detect L
Z
Nonfunctional
-
-
VROUT
Detect H
PIN NUMBER 1
A ~ D Series
E & F Series
F Series
* The XC6404A and XC6404B series are under development. For further detail, please ask your sales contacts.
Semiconductor Ltd.
Data Sheet
3
XC6404 Series
High Current, High Speed LDO Regulators, Voltage Detector Function
! ORDERING INFORMATION
# Pin Number
3, 4
Type
(80 ~ 99 : Standard voltage products)
34
VROUT
VDOUT
34
VROUT
VDOUT
34
01
2.70
4.20
21
1.80
3.60
02
2.70
4.20
22
1.80
4.20
81
2.80
3.10
03
2.50
2.60
23
2.50
2.90
82
1.80
2.00
04
3.30
4.30
24
2.50
3.60
83
2.50
2.80
05
3.30
4.40
25
2.50
4.20
84
2.85
3.20
06
3.30
4.00
26
4.30
4.00
85
3.00
3.30
07
3.30
5.20
27
2.50
3.90
86
3.50
3.80
08
2.80
4.30
28
3.30
3.70
87
3.00
4.20
09
4.30
2.80
29
2.60
3.90
88
3.30
4.00
10
3.30
3.60
30
3.30
4.20
89
11
2.80
2.10
31
3.30
4.50
90
12
2.80
2.80
32
2.85
2.60
91
13
3.30
3.60
33
3.30
2.80
92
14
3.30
3.60
34
3.40
4.20
93
15
3.30
3.60
35
94
16
3.00
2.70
36
95
17
2.80
2.50
37
96
18
3.00
2.70
38
97
VROUT
VDOUT
34
VROUT
VDOUT
80
1.80
1.60
19
2.80
2.50
39
98
20
1.80
2.90
40
99
For the other voltages, please ask your sales contacts.
# Ordering Example (Standard Products)
PRODUCT NAME
VOLTAGE
PRODUCT DESCRIPTION
VROUT
VDOUT
XC6404CH80MR
EN function, Active HIGH, VROUT Sense, Detect L
1.80
1.60
XC6404CE81MR
EN function, Active HIGH, VIN Sense, Detect L
2.80
3.10
XC6404DE82MR
CE function, Active HIGH, VIN Sense, Detect L
1.80
2.00
XC6404DE83MR
CE function, Active HIGH, VIN Sense, Detect L
2.50
2.80
XC6404DE84MR
CE function, Active HIGH, VIN Sense, Detect L
2.85
3.20
XC6404DE85MR
CE function, Active HIGH, VIN Sense, Detect L
3.00
3.30
XC6404DE86MR
CE function, Active HIGH, VIN Sense, Detect L
3.50
3.80
XC6404FV87MR
Cd function, VIN Sense, Detect L
3.00
4.20
XC6404FV88MR
Cd function, VIN Sense, Detect L
3.30
4.00
XC6404DE89MR
CE function, Active HIGH, VIN Sense, Detect L
1.20
2.00
XC6404DE90MR
CE function, Active HIGH, VIN Sense, Detect L
1.30
2.00
XC6404DE91MR
CE function, Active HIGH, VIN Sense, Detect L
1.50
2.00
Except for the standard products, minimum ordering quantity is 15K.
Semiconductor Ltd.
Data Sheet
4
XC6404 Series
High Current, High Speed LDO Regulators, Voltage Detector Function
! PACKAGING INFORMATION
# SOT-25
# SOT-89-5
Semiconductor Ltd.
Data Sheet
5
XC6404 Series
High Current, High Speed LDO Regulators, Voltage Detector Function
! ABSOLUTE MAXIMUM RATINGS
PARAMETER
SYMBOL
RATINGS
Input Voltage
VIN
7.0
V
VR Output Current
VRIOUT
700
mA
VR Output Voltage
VROUT
VSS -0.3 ~ VIN +0.3
V
VD Output Current
VDIOUT
50
mA
VD Output Voltage
VCE / VSEN / Cd
Pin Voltage
VDOUT
VSS -0.3 ~ 7.0
V
VSS -0.3 ~ VIN + 0.3
V
Continuous
Power Dissipation
VCE /
VSEN / Cd
SOT-25
250
Pd
SOT-89-5
UNITS
500
mW
Operating Temperature Range
Topr
- 40 ~ + 85
O
Storage Temperature Range
Tstg
- 55 ~ + 125
O
C
C
! ELECTRICAL CHARACTERISTICS XC6404 Series
PARAMETER
SYMBOL
CONDITIONS
MIN
TYP
MAX
UNITS
CIRCUIT
VR Output Voltage (note 2, 3)
VR Maximum Output Current
(0.9 ~ 2.4V product)
VR Maximum Output Current
(2.5 ~ 4.9V product)
VR Load Regulation
VROUT(E)
IROUT=30mA
x 0.98
VROUT(T)
x 1.02
V
1
IROUTMAX
VIN=VROUT(T)+2.0V
400
-
-
mA
1
500
-
-
mA
1
15
E-1 (page 15)
E-2 (page 15)
50
mV
mV
mV
1
1
1
-
35
70
µA
2
-
40
75
µA
2
-
0.01
0.20
%/V
1
6.0
V
-
VR Dropout Voltage (note 4)
Supply Current
(No Pull-up Resistor)
VOLTAGE REGULATOR
Ta=25OC
Supply Current
(With Pull-up Resistor)
VR Line Regulation
Input Voltage
VR Output Voltage
Temperature Characteristics
VR Ripple Rejection Rate
VR Current Limiter
(2.4V or less)
VR Current Limiter
(2.5V or more)
Short-Circuit Current
VIN=VROUT(T)+2.0V
When VROUT(T)>4.0V, VIN=6.0V
1mA<IROUT<100mA
∆VROUT
IROUT=30mA
Vdif1
IROUT=100mA
Vdif2
VIN=VROUT(T)+1.0V, VEN/CE=ON
VROUT<0.9V VIN=2.0V
IDD
VEN/CE =VIN or VSS
VIN=VROUT(T)+1.0V, VEN/CE=ON
VROUT<0.9V VIN=2.0V
IDD
VEN/CE =VIN or VSS
VROUT(T)+1.0V<VIN<6.0V
When VROUT<0.9V, 2.0V<VIN<6.0V
∆VROUT
IROUT=30mA
∆VIN ⋅ VROUT
When VROUT<1.75V, IROUT=10mA
VIN
IROUT=30mA
∆VROUT
∆Topr ⋅ VROUT
-40OC<Topr<85OC
VIN=[VROUT(T)+1.0]V+0.5Vp-pAC
When VROUT(T) < 1.25V
! VIN=2.25V+0.5Vp-pAC
PSRR
When VROUT(T) > 4.75V
! VIN=5.75V+0.5Vp-pAC
IROUT=50mA, f=10kHz
IROUTMAX
IRlim
IRlim
IRshort
VIN=VROUT(T)+2.0V
VIN=VROUT(T)+2.0V
When VROUT(T)>4.0V, VIN=6.0V
VIN=VROUT(T)+2.0V
When VROUT(T)>4.0V, VIN=6.0V
2.0
-
±100
-
ppm / C
1
-
65
-
dB
3
-
600
-
mA
1
500
600
-
mA
1
-
50
-
mA
1
O
Semiconductor Ltd.
Data Sheet
6
XC6404 Series
High Current, High Speed LDO Regulators, Voltage Detector Function
! ELECTRICAL CHARACTERISTICS (Continued)
XC6404 Series
Ta=25OC
SYMBOL
VD Detect Voltage (note 7, 8)
VDF (E)
VD Hysteresis Range (note 7)
VHYS
VOLTAGE DETECTOR
PARAMETER
VD Supply Current
IDDVD
CONDITIONS
MIN
TYP
MAX
UNITS
CIRCUIT
VDF (T)
VDF (T)
x 0.05
6.5
7.0
7.5
8.0
9.0
x 1.02
VDF (T)
x 0.08
14.5
15.0
15.5
16.0
17.0
V
4
V
4
VIN = 2.0V
VIN = 3.0V
VIN = 4.0V
VIN = 5.0V
VIN = 6.0V
x 0.98
VDF (T)
x 0.02
-
µA
2
mA
5
VDOUT = 0.5V
VD Output Current
(note 9)
VD Detect Voltage
Temperature Characteristics
SWITCH (NO PULL-UP RESISTOR)
CE/EN "High" Level Voltage
CE/EN "Low" Level Voltage
CE/EN "High" Level Current
CE/EN "Low" Level Current
IDOUT
∆VDF /
∆Topr ⋅ VDF
VCE/EN H
VCE/EN L
ICE/EN H
ICE/EN L
VIN = 2.0V
3.0
6.0
-
VIN = 3.0V
4.0
8.0
-
VIN = 4.0V
5.0
10.0
-
VIN = 5.0V
7.0
12.0
-
VIN = 6.0V
10.0
15.0
-
-40OC<Topr<85OC
-
±100
-
ppm / OC
4
VCE/EN=VIN=VROUT(T)+1.0V
VIN=VROUT(T)+1.0V, VCE/EN=VSS
1.60
-0.10
-0.10
-
VIN
0.25
5.00
0.10
V
V
µA
µA
1
1
2
2
1.0
2.0
3.5
MΩ
6
OPTION
Delay Resistance
Rdelay
VIN=6.0V, Cd=0V
Delay Resistance=6.0V/Delay Current
(NOTE 1) Unless otherwise stated, VIN=VOUT(T)+1.0V
(NOTE 2) VROUT(T)=Specified VR Output Voltage
(NOTE 3) VOUT(E)=Actual VR Output Voltage
(i.e. the VR output voltage when "VROUT(T)+1.0V" is provided at the VIN pin while maintaining a certain IROUT value).
(NOTE 4) Vdif={VIN1(NOTE6)-VROUT1(NOTE5)}
(NOTE 5) A voltage equal to 98% of the VR Output Voltage whenever a stabilized VROUT1=IROUT{VROUT(T)+1.0V} is input.
(NOTE 6) VIN1=The Input Voltage when VOUT1, which appears as Input Voltage is gradually decreased.
(NOTE 7) VDF (T) : Specified Detect Voltage value
(NOTE 8) VDF (E) : Actual Detect Voltage value. Refer to the E-0 chart on page 15 for VDF(T) values less than 1.5V.
(NOTE 9) VD Output Current value of Detect 'L' type equal to current value during detection
and that of Detect 'H' type equal to current value before detection.
Semiconductor Ltd.
Data Sheet
7
XC6404 Series
High Current, High Speed LDO Regulators, Voltage Detector Function
! ELECTRICAL CHARACTERISTICS (Continued)
XC6404 AA / AD / AE / AH Series
PARAMETER
SYMBOL
CONDITIONS
MIN
TYP
MAX
UNITS
CIRCUIT
VR Output Voltage (note 2, 3)
VR Maximum Output Current
(0.9 ~ 2.4V product)
VROUT(E)
IROUT=30mA
x 0.98
VROUT(T)
x 1.02
V
1
IROUTMAX
VIN=VROUT(T)+2.0V
400
-
-
mA
1
IROUTMAX
VIN=VROUT(T)+2.0V,
When VROUT(T)>4.0V, VIN=6.0V
500
-
-
mA
1
∆VROUT
Vdif1
Vdif2
1mA<IROUT<100mA
IROUT=30mA
IROUT=100mA
-
15
E-1 (page 15)
E-2 (page 15)
50
mV
mV
mV
1
1
1
Supply Current
(AA / AD Series)
IDD
VIN=VEN=VROUT(T)+1.0V,
When VROUT<0.9V, VIN=2.0V
-
40
75
µA
2
Supply Current
(AE / AH Series)
IDD
VIN=VEN=VROUT(T)+1.0V,
When VROUT<0.9V, VIN=2.1V
-
35
70
µA
2
-
0.01
0.20
%/V
1
6.0
V
VR Maximum Output Current
(2.5 ~ 4.9V product)
VR Load Regulation
VOLTAGE REGULATOR
VR Dropout Voltage (note 4)
VR Line Regulation
Input Voltage
VR Output Voltage
Temperature Characteristics
VR Ripple Rejection Rate
VOLTAGE DETECTOR
Ta=25OC
VROUT(T)+1.0V<VIN<6.0V
When VROUT<0.9V, 2.0V<VIN<6.0V
∆VROUT
∆VIN ⋅ VROUT
IROUT=30mA
When VROUT<1.75V, IROUT=10mA
VIN
∆VROUT
IROUT=30mA
-40OC<Topr<85OC
∆Topr ⋅ VROUT
VIN=[VROUT(T)+1.0]V+0.5Vp-pAC
When VROUT(T) < 1.25V
! VIN=2.25V+0.5Vp-pAC
PSRR
When VROUT(T) > 4.75V
! VIN=5.75V+0.5Vp-pAC
IROUT=50mA, f=10kHz
2.0
-
±100
-
ppm / OC
1
-
65
-
dB
3
VR Current Limiter
(2.4V or less)
IRlim
VIN=VROUT(T)+2.0V
-
600
-
mA
1
VR Current Limiter
(2.5V or more)
IRlim
VIN=VROUT(T)+2.0V
When VROUT(T)>4.0V, VIN=6.0V
500
600
-
mA
1
Short-circuit Current
IRshort
VIN=VROUT(T)+2.0V
When VROUT(T)>4.0V, VIN=6.0V
-
50
-
mA
1
VD Detect Voltage (note 7, 8)
VDF (E)
x 1.02
VDF (T)
x 0.08
14.5
15.0
15.5
16.0
17.0
4
VHYS
VDF (T)
VDF (T)
x 0.05
6.5
7.0
7.5
8.0
9.0
V
VD Hysteresis Range (note 8)
x 0.98
VDF (T)
x 0.02
-
V
4
µA
2
3.0
4.0
5.0
7.0
10.0
6.0
8.0
10.0
12.0
15.0
-
mA
5
-
±100
-
ppm / OC
4
VD Supply Current
(note 9)
IDDVD
VD Output Current
(note 10)
IDOUT
VD Detect Voltage
Temperature Characteristics
∆VDF /
∆Topr ⋅ VDF
VIN = 2.0V
VIN = 3.0V
VIN = 4.0V
VIN = 5.0V
VIN = 6.0V
VDOUT = 0.5V
VIN = 2.0V
VIN = 3.0V
VIN = 4.0V
VIN = 5.0V
VIN = 6.0V
-40OC<Topr<85OC
Semiconductor Ltd.
Data Sheet
8
XC6404 Series
High Current, High Speed LDO Regulators, Voltage Detector Function
! ELECTRICAL CHARACTERISTICS (Continued)
XC6404 AA / AD / AE / AH Series
PARAMETER
SWITCH
EN "High" Level Voltage
EN "Low" Level Voltage
Ta=25OC
SYMBOL
CONDITIONS
VEN H
VEN L
MIN
TYP
MAX
UNITS
CIRCUIT
1.60
-
-
VIN
0.25
V
V
1
1
EN "High" Level Current
(AA / AD Series)
IEN H
VEN=VIN=VROUT(T)+1.0V
-0.10
-
5.00
µA
2
EN "High" Level Current
(AE /AH Series)
IEN H
VEN=VIN=VROUT(T)+1.0V
-0.10
-
0.10
µA
2
µA
2
EN "Low" Level Current
IEN L
VIN=VROUT(T)+1.0V, VEN=VSS
-0.10
0.10
(NOTE 1) Unless otherwise stated, VIN=VOUT(T)+1.0V
(NOTE 2) VROUT(T)=Specified VR Output Voltage
(NOTE 3) VOUT(E)=Actual VR Output Voltage
(i.e. the VR output voltage when "VROUT(T)+1.0V" is provided at the VIN pin while maintaining a certain IROUT value).
(NOTE 4) Vdif={VIN1(NOTE6)-VROUT1(NOTE5)}
(NOTE 5) A voltage equal to 98% of the VR Output Voltage whenever a stabilized VROUT1=IROUT{VROUT(T)+1.0V} is input.
(NOTE 6) VIN1=The Input Voltage when VOUT1, which appears as Input Voltage is gradually decreased.
(NOTE 7) VDF (T) : Specified Detect Voltage value
(NOTE 8) VDF (E) : Actual Detect Voltage value. Refer to the E-0 chart on page 15 for VDF(T) values less than 1.5V.
(NOTE 9) VD Supply Current = Supply Current when VEN=VSS
(NOTE 10) VD Output Current = Sink Current during detection.
Semiconductor Ltd.
Data Sheet
9
XC6404 Series
High Current, High Speed LDO Regulators, Voltage Detector Function
! ELECTRICAL CHARACTERISTICS (Continued)
XC6404 CA / CD / CE / CH Series
PARAMETER
SYMBOL
CONDITIONS
MIN
TYP
MAX
UNITS
CIRCUIT
VR Output Voltage (note 2, 3)
VR Maximum Output Current
(0.9 ~ 2.4V product)
VROUT(E)
IROUT=30mA
x 0.98
VROUT(T)
x 1.02
V
1
IROUTMAX
VIN=VROUT(T)+2.0V
400
-
-
mA
1
IROUTMAX
VIN=VROUT(T)+2.0V,
When VROUT(T)>4.0V, VIN=6.0V
500
-
-
mA
1
∆VROUT
Vdif1
Vdif2
1mA<IROUT<100mA
IROUT=30mA
IROUT=100mA
-
15
E-1 (page 15)
E-2 (page 15)
50
mV
mV
mV
1
1
1
Supply Current
(CA / CD Series)
IDD
VIN=VEN=VROUT(T)+1.0V,
When VROUT<0.9V, VIN=2.0V
-
40
75
µA
2
Supply Current
(CE / CH Series)
IDD
VIN=VEN=VROUT(T)+1.0V,
When VROUT<0.9V, VIN=2.0V
-
35
70
µA
2
-
0.01
0.20
%/V
1
6.0
V
-
VR Maximum Output Current
(2.5 ~ 4.9V product)
VR Load Regulation
VOLTAGE REGULATOR
VR Dropout Voltage (note 4)
VR Line Regulation
Input Voltage
VR Output Voltage
Temperature Characteristics
VR Ripple Rejection Rate
VOLTAGE DETECTOR
Ta=25OC
VROUT(T)+1.0V<VIN<6.0V
When VROUT<0.9V, 2.0V<VIN<6.0V
∆VROUT
∆VIN ⋅ VROUT
IROUT=30mA
When VROUT<1.75V, IROUT=10mA
VIN
∆VROUT
IROUT=30mA
-40OC<Topr<85OC
∆Topr ⋅ VROUT
VIN=[VROUT(T)+1.0]V+0.5Vp-pAC
When VROUT(T) < 1.25V
! VIN=2.25V+0.5Vp-pAC
PSRR
When VROUT(T) > 4.75V
! VIN=5.75V+0.5Vp-pAC
IROUT=50mA, f=10kHz
2.0
-
±100
-
ppm / OC
1
-
65
-
dB
3
VR Current Limiter
(2.4V or less)
IRlim
VIN=VROUT(T)+2.0V
-
600
-
mA
1
VR Current Limiter
(2.5V or more)
IRlim
VIN=VROUT(T)+2.0V,
When VROUT(T)>4.0V, VIN=6.0V
500
600
-
mA
1
Short-Circuit Current
IRshort
VIN=VROUT(T)+2.0V,
When VROUT(T)>4.0V, VIN=6.0V
-
50
-
mA
1
VD Detect Voltage (note 7, 8)
VDF (E)
4
VHYS
x 1.02
VDF (T)
x 0.08
14.5
15.0
15.5
16.0
17.0
V
VD Hysteresis Range (note 8)
x 0.98
VDF (T)
x 0.02
V
4
µA
2
mA
5
ppm / OC
4
VD Supply Current
(note 9)
IDDVD
VD Output Current
(note 10)
IDOUT
VD Detect Voltage
Temperature Characteristics
∆VDF /
∆Topr ⋅ VDF
VIN = 2.0V
VIN = 3.0V
VIN = 4.0V
VIN = 5.0V
VIN = 6.0V
VDOUT = 0.5V
VIN = 2.0V
VIN = 3.0V
VIN = 4.0V
VIN = 5.0V
VIN = 6.0V
-
VDF (T)
VDF (T)
x 0.05
6.5
7.0
7.5
8.0
9.0
3.0
4.0
5.0
7.0
10.0
6.0
8.0
10.0
12.0
15.0
-
-40OC<Topr<85OC
-
±100
-
Semiconductor Ltd.
Data Sheet
10
XC6404 Series
High Current, High Speed LDO Regulators, Voltage Detector Function
! ELECTRICAL CHARACTERISTICS (Continued)
XC6404 CA / CD / CE / CH Series
PARAMETER
SWITCH
EN "High" Level Voltage
EN "Low" Level Voltage
Ta=25OC
SYMBOL
CONDITIONS
VEN H
VEN L
MIN
TYP
MAX
UNITS
CIRCUIT
1.6
-
VIN
0.25
V
V
1
1
EN "High" Level Current
(CA / CD Series)
IEN H
VEN=VIN=VROUT(T)+1.0V
-0.10
-
5.00
µA
2
EN "High" Level Current
(CE /CH Series)
IEN H
VEN=VIN=VROUT(T)+1.0V
-0.10
-
0.10
µA
2
µA
2
EN "Low" Level Current
IEN L
VIN=VROUT(T)+1.0V, VEN=VSS
-0.10
0.10
(NOTE 1) Unless otherwise stated, VIN=VOUT(T)+1.0V
(NOTE 2) VROUT(T)=Specified VR Output Voltage
(NOTE 3) VOUT(E)=Actual VR Output Voltage
(i.e. the VR output voltage when "VROUT(T)+1.0V" is provided at the VIN pin while maintaining a certain IROUT value).
(NOTE 4) Vdif={VIN1(NOTE6)-VROUT1(NOTE5)}
(NOTE 5) A voltage equal to 98% of the VR Output Voltage whenever a stabilized VROUT1=IROUT{VROUT(T)+1.0V} is input.
(NOTE 6) VIN1=The Input Voltage when VOUT1, which appears as Input Voltage is gradually decreased.
(NOTE 7) VDF (T) : Specified Detect Voltage value
(NOTE 8) VDF (E) : Actual Detect Voltage value. Refer to the E-0 chart on page 15 for VDF(T) values less than 1.5V.
(NOTE 9) VD Supply Current = Supply Current when VEN=VSS
(NOTE 10) VD Output Current = Sink Current during detection.
Semiconductor Ltd.
Data Sheet
11
XC6404 Series
High Current, High Speed LDO Regulators, Voltage Detector Function
! ELECTRICAL CHARACTERISTICS (Continued)
XC6404 DA / DD / DE / DH Series
PARAMETER
SYMBOL
CONDITIONS
MIN
TYP
MAX
UNITS
CIRCUIT
VR Output Voltage (note 2, 3)
VR Maximum Output Current
(0.9 ~ 2.4V product)
VR Maximum Output Current
(2.5 ~ 4.9V product)
VR Load Regulation
VROUT(E)
IROUT=30mA
x 0.98
VROUT(T)
x 1.02
V
1
IROUTMAX
VIN=VROUT(T)+2.0V
400
-
-
mA
1
500
-
-
mA
1
-
15
E-1 (page 15)
E-2 (page 15)
50
mV
mV
mV
1
1
1
VOLTAGE REGULATOR
VR Dropout Voltage (note 4)
IROUTMAX
∆VROUT
Vdif1
Vdif2
VIN=VROUT(T)+2.0V,
When VROUT(T)>4.0V, VIN=6.0V
1mA<IROUT<100mA
IROUT=30mA
IROUT=100mA
Supply Current
(DA / DD Series)
IDD
VIN=VCE=VROUT(T)+1.0V,
When VROUT<0.9V, VIN=2.0V
-
40
75
µA
2
Supply Current
(DE / DH Series)
IDD
VIN=VCE=VROUT(T)+1.0V,
When VROUT<0.9V, VIN=2.0V
-
35
70
µA
2
-
0.01
0.10
%/V
2
-
0.01
0.20
%/V
1
6.0
V
-
Stand-by Current
(DA / DD / DE / DH Series)
VR Line Regulation
Input Voltage
VR Output Voltage
Temperature Characteristics
VR Ripple Rejection Rate
VR Current Limiter
(2.4V or less)
VR Current Limiter
(2.5V or more)
VOLTAGE DETECTOR
Ta=25OC
VIN=VROUT(T)+1.0V, VCE=0V,
When VROUT<0.9V, VIN=2.0V
VROUT(T)+1.0V<VIN<6.0V
When VROUT<0.9V, 2.0V<VIN<6.0V
∆VROUT
IROUT=30mA
∆VIN ⋅ VROUT
When VROUT<1.75V, IROUT=10mA
VIN
IROUT=30mA
∆VROUT
-40OC<Topr<85OC
∆Topr ⋅ VROUT
IDD
-
±100
-
ppm / C
1
PSRR
VIN=[VROUT(T)+1.0]V+0.5Vp-pAC
When VROUT(T) < 1.25V
! VIN=2.25V+0.5Vp-pAC
When VROUT(T) > 4.75V
! VIN=5.75V+0.5Vp-pAC
IROUT=50mA, f=10kHz
-
65
-
dB
3
IRlim
VIN=VROUT(T)+2.0V
-
600
-
mA
1
500
600
-
mA
1
mA
1
V
4
V
4
mA
5
ppm / OC
4
V
V
1
1
µA
2
µA
2
µA
2
IRlim
Short-Circuit Current
IRshort
VD Detect Voltage (note 7, 8)
VDF (E)
VD Hysteresis Range (note 8)
VHYS
VD Output Current
(note 9)
2.0
IDOUT
VIN=VROUT(T)+2.0V,
When VROUT(T)>4.0V, VIN=6.0V
VIN=VROUT(T)+2.0V,
When VROUT(T)>4.0V, VIN=6.0V
VDOUT = 0.5V
VIN = 2.0V
VIN = 3.0V
VIN = 4.0V
VIN = 5.0V
VIN = 6.0V
50
x 0.98
VDF (T)
x 0.02
VDF (T)
VDF (T)
x 0.05
x 1.02
VDF (T)
x 0.08
3.0
4.0
5.0
7.0
10.0
6.0
8.0
10.0
12.0
15.0
-
SWITCH
VD Detect Voltage
∆VDF /
-40OC<Topr<85OC
±100
Temperature Characteristics
∆Topr ⋅ VDF
1.6
VIN
CE "High" Level Voltage
VCE H
0.25
CE "Low" Level Voltage
VCE L
CE "High" Level Current
5.00
ICE H
VCE=VIN=VROUT(T)+1.0V
-0.10
(DA / DD Series)
CE "High" Level Current
0.10
ICE H
VCE=VIN=VROUT(T)+1.0V
-0.10
(DE /DH Series)
CE "Low" Level Current
ICE L
0.10
VIN=VROUT(T)+1.0V, VCE=VSS
-0.10
(NOTE 1) Unless otherwise stated, VIN=VOUT(T)+1.0V
(NOTE 2) VROUT(T)=Specified VR Output Voltage
(NOTE 3) VOUT(E)=Actual VR Output Voltage
(i.e. the VR output voltage when "VROUT(T)+1.0V" is provided at the VIN pin while maintaining a certain IROUT value).
(NOTE 4) Vdif={VIN1(NOTE6)-VROUT1(NOTE5)}
(NOTE 5) A voltage equal to 98% of the VR Output Voltage whenever a stabilized VROUT1=IROUT{VROUT(T)+1.0V} is input.
(NOTE 6) VIN1=The Input Voltage when VOUT1, which appears as Input Voltage is gradually decreased.
(NOTE 7) VDF (T) : Specified Detect Voltage value
(NOTE 8) VDF (E) : Actual Detect Voltage value. Refer to the E-0 chart on page 15 for VDF(T) values less than 1.5V.
(NOTE 9) VD Output Current = Sink Current during detection.
O
Semiconductor Ltd.
Data Sheet
12
XC6404 Series
High Current, High Speed LDO Regulators, Voltage Detector Function
! ELECTRICAL CHARACTERISTICS (Continued)
XC6404 EV / EX Series
PARAMETER
SYMBOL
CONDITIONS
MIN
TYP
MAX
UNITS
CIRCUIT
VR Output Voltage
VR Maximum Output Current
(0.9 ~ 2.4V product)
VROUT(E)
IROUT=30mA
x 0.98
VROUT(T)
x 1.02
V
1
IROUTMAX
VIN=VROUT(T)+2.0V
400
-
-
mA
1
IROUTMAX
VIN=VROUT(T)+2.0V,
When VROUT(T)>4.0V, VIN=6.0V
500
-
-
mA
1
∆VROUT
Vdif1
Vdif2
1mA<IROUT<100mA
IROUT=30mA
IROUT=100mA
-
15
E-1 (page 15)
E-2 (page 15)
50
mV
mV
mV
1
1
1
IDD
VIN=VROUT(T)+1.0V,
When VROUT<0.9V, VIN=2.0V
-
35
70
µA
2
-
0.01
0.20
%/V
1
6.0
V
VR Maximum Output Current
(2.5 ~ 4.9V product)
VR Load Regulation
VR Dropout Voltage
VOLTAGE REGULATOR
Supply Current
(EV / EX Series)
VR Line Regulation
Input Voltage
VR Output Voltage
Temperature Characteristics
Ripple Rejection Rate
VOLTAGE DETECTOR
Ta=25OC
VROUT(T)+1.0V<VIN<6.0V
When VROUT<0.9V, 2.0V<VIN<6.0V
∆VROUT
∆VIN ⋅ VROUT
IROUT=30mA
When VROUT<1.75V, IROUT=10mA
VIN
∆VROUT
IROUT=30mA
-40OC<Topr<85OC
∆Topr ⋅ VROUT
VIN=[VROUT(T)+1.0]V+0.5Vp-pAC
When VROUT(T) < 1.25V
! VIN=2.25V+0.5Vp-pAC
PSRR
When VROUT(T) > 4.75V
! VIN=5.75V+0.5Vp-pAC
IROUT=50mA, f=10kHz
2.0
-
±100
-
ppm / OC
1
-
65
-
dB
3
VR Current Limiter
(2.4V or less)
IRlim
VIN=VROUT(T)+2.0V
-
600
-
mA
1
VR Current Limiter
(2.5V or more)
IRlim
VIN=VROUT(T)+2.0V,
When VROUT(T)>4.0V, VIN=6.0V
500
600
-
mA
1
Short-Circuit Current
IRshort
VIN=VROUT(T)+2.0V,
When VROUT(T)>4.0V, VIN=6.0V
-
50
-
mA
1
VD Detect Voltage
VDF (E)
x 1.02
VDF (T)
x 0.08
4
VHYS
VDF (T)
VDF (T)
x 0.05
V
VD Hysteresis Range
x 0.98
VDF (T)
x 0.02
V
4
3.0
4.0
5.0
7.0
10.0
6.0
8.0
10.0
12.0
15.0
-
mA
5
ppm / OC
4
VD Output Current
(note 9)
IDOUT
VDOUT = 0.5V
VIN = 2.0V
VIN = 3.0V
VIN = 4.0V
VIN = 5.0V
VIN = 6.0V
∆VDF /
-40OC<Topr<85OC
±100
∆Topr ⋅ VDF
(NOTE 1) Unless otherwise stated, VIN=VOUT(T)+1.0V
(NOTE 2) VROUT(T)=Specified VR Output Voltage
(NOTE 3) VOUT(E)=Actual VR Output Voltage.
(i.e. the VR output voltage when "VROUT(T)+1.0V" is provided at the VIN pin while maintaining a certain IROUT value).
(NOTE 4) Vdif={VIN1(NOTE6)-VROUT1(NOTE5)}
(NOTE 5) A voltage equal to 98% of the VR Output Voltage whenever a stabilized VROUT1=IROUT{VROUT(T)+1.0V} is input.
(NOTE 6) VIN1=The Input Voltage when VOUT1, which appears as Input Voltage is gradually decreased.
(NOTE 7) VDF (T) : Specified Detect Voltage value
(NOTE 8) VDF (E) : Actual Detect Voltage value. Refer to the E-0 chart on page 15 for VDF(T) less than 1.5V.
(NOTE 9) VD Output Current = Sink Current during detection.
VD Detect Voltage
Temperature Characteristics
Semiconductor Ltd.
Data Sheet
13
XC6404 Series
High Current, High Speed LDO Regulators, Voltage Detector Function
! ELECTRICAL CHARACTERISTICS (Continued)
XC6404 FV / FX / FY / FZ Series
PARAMETER
SYMBOL
CONDITIONS
MIN
TYP
MAX
UNITS
CIRCUIT
VR Output Voltage (note 2, 3)
VR Maximum Output Current
(0.9 ~ 2.4V product)
VROUT(E)
IROUT=30mA
x 0.98
VROUT(T)
x 1.02
V
1
IROUTMAX
VIN=VROUT(T)+2.0V
400
-
-
mA
1
IROUTMAX
VIN=VROUT(T)+2.0V,
When VROUT(T)>4.0V, VIN=6.0V
500
-
-
mA
1
∆VROUT
Vdif1
Vdif2
1mA<IROUT<100mA
IROUT=30mA
IROUT=100mA
15
E-1 (page 15)
E-2 (page 15)
50
mV
mV
mV
1
1
1
IDD
VIN=VROUT(T)+1.0V,
When VROUT<0.9V, VIN=2.0V
35
70
µA
2
-
0.01
0.20
%/V
1
2.0
-
6.0
V
-
±100
-
ppm / OC
1
-
65
-
dB
3
VR Maximum Output Current
(2.5 ~ 4.9V product)
VR Load Regulation
VR Dropout Voltage (note 4)
VOLTAGE REGULATOR
Supply Current
(FV / FX / FY / FZ Series)
VOLTAGE DETECTOR
Ta=25OC
VR Line Regulation
Input Voltage
VROUT(T)+1.0V<VIN<6.0V
When VROUT<0.9V, 2.0V<VIN<6.0V
∆VROUT
∆VIN ⋅ VROUT
IROUT=30mA
When VROUT<1.75V, IROUT=10mA
VIN
∆VROUT
VR Output Voltage
Temperature Characteristics
∆Topr ⋅ VROUT
Ripple Rejection Rate
PSRR
VR Current Limiter
(2.4V or less)
IRlim
VIN=VROUT(T)+2.0V
-
600
-
mA
1
VR Current Limiter
(2.5V or more)
IRlim
VIN=VROUT(T)+2.0V,
When VROUT(T)>4.0V, VIN=6.0V
500
600
-
mA
1
Short-Circuit Current
IRshort
VIN=VROUT(T)+2.0V,
When VROUT(T)>4.0V, VIN=6.0V
-
50
-
mA
1
VD Detect Voltage (note 7, 8)
VDF (E)
x 1.02
VDF (T)
x 0.08
4
VHYS
VDF (T)
VDF (T)
x 0.05
V
VD Hysteresis Range (note 8)
x 0.98
VDF (T)
x 0.02
V
4
3.0
4.0
5.0
7.0
10.0
6.0
8.0
10.0
12.0
15.0
-
mA
5
-
±100
-
ppm / OC
4
1.0
2.0
3.5
MΩ
6
IROUT=30mA
-40OC<Topr<85OC
VIN=[VROUT(T)+1.0]V+0.5Vp-pAC
When VROUT(T) < 1.25V
! VIN=2.25V+0.5Vp-pAC
When VROUT(T) > 4.75V
! VIN=5.75V+0.5Vp-pAC
IROUT=50mA, f=10kHz
VD Output Current
(note 9)
IDOUT
VDOUT = 0.5V
VIN = 2.0V
VIN = 3.0V
VIN = 4.0V
VIN = 5.0V
VIN = 6.0V
VD Detect Voltage
Temperature Characteristics
∆VDF /
∆Topr ⋅ VDF
-40OC<Topr<85OC
Delay Resistance
Rdelay
VIN=6.0V, Cd=0V
Delay Resistance=6.0V/Delay Current
(NOTE 1) Unless otherwise stated, VIN=VOUT(T)+1.0V
(NOTE 2) VROUT(T)=Specified VR Output Voltage
(NOTE 3) VOUT(E)=Actual VR Output Voltage
(i.e. the VR output voltage when "VROUT(T)+1.0V" is provided at the VIN pin while maintaining a certain IROUT value).
(NOTE 4) Vdif={VIN1(NOTE6)-VROUT1(NOTE5)}
(NOTE 5) A voltage equal to 98% of the VR Output Voltage whenever a stabilized VROUT1=IROUT{VROUT(T)+1.0V} is input.
(NOTE 6) VIN1=The Input Voltage when VOUT1, which appears as Input Voltage is gradually decreased.
(NOTE 7) VDF (T) : Specified Detect Voltage value
(NOTE 8) VDF (E) : Actual Detect Voltage value. Refer to the E-0 chart on page 15 for VDF(T) values less than 1.5V.
(NOTE 9) VD Supply Current = Sink Current during detection.
Semiconductor Ltd.
Data Sheet
14
XC6404 Series
High Current, High Speed LDO Regulators, Voltage Detector Function
! VR DROPOUT VOLTAGE
E-0
E-1
E-1
OUTPUT VOLTAGE
DETECT VOLTAGE
DROPOUT VOLTAGE 1 (mV)
(IOUT=30mA)
DROPOUT VOLTAGE 2 (mV)
(IOUT=100mA)
(V)
VROUT / VDF
Ta=25OC
Ta=25OC
SYMBOL
PARAMETER
SPECIFIED
DETECT VOLTAGE
OUTPUT VOLTAGE
VROUT(T)
VDF(T)
MIN.
MAX.
0.90
1.00
1.10
1.20
1.30
1.40
1.50
1.60
1.70
1.80
1.90
2.00
2.10
2.20
2.30
2.40
2.50
2.60
2.70
2.80
2.90
3.00
3.10
3.20
3.30
3.40
3.50
3.60
3.70
3.80
3.90
4.00
4.10
4.20
4.30
4.40
4.50
4.60
4.70
4.80
4.90
5.00
5.10
5.20
5.30
5.40
5.50
0.870
0.970
1.070
1.170
1.270
1.370
1.470
1.568
1.666
1.764
1.862
1.960
2.058
2.156
2.254
2.352
2.450
2.548
2.646
2.744
2.842
2.940
3.038
3.136
3.234
3.332
3.430
3.528
3.626
3.724
3.822
3.920
4.018
4.116
4.214
4.312
4.410
4.508
4.606
4.704
4.802
4.900
4.998
5.096
5.194
5.292
5.390
0.930
1.030
1.130
1.230
1.330
1.430
1.530
1.632
1.734
1.836
1.938
2.040
2.142
2.244
2.346
2.448
2.550
2.652
2.754
2.856
2.958
3.060
3.162
3.264
3.366
3.468
3.570
3.672
3.774
3.876
3.978
4.080
4.182
4.284
4.386
4.488
4.590
4.692
4.794
4.896
4.998
5.100
5.202
5.304
5.406
5.508
5.610
Vdif1
TYP.
Vdif1
MAX.
Vdif2
TYP.
Vdif2
MAX.
1050
1000
900
800
700
600
500
400
300
200
120
80
80
80
80
80
70
70
70
70
70
60
60
60
60
60
60
60
60
60
60
60
60
60
60
60
60
60
60
60
60
50
50
1100
1100
1000
900
800
700
600
500
400
300
150
120
120
120
120
120
100
100
100
100
100
90
90
90
90
90
90
90
90
90
90
80
80
80
80
80
80
80
80
80
80
70
70
1150
1050
950
850
750
650
550
500
400
300
280
240
240
240
240
240
220
220
220
220
220
200
200
200
200
200
200
200
200
200
200
180
180
180
180
180
180
180
180
180
180
160
160
1200
1200
1100
1000
900
800
700
600
500
400
380
350
330
330
310
310
290
290
290
270
270
270
250
250
250
250
250
250
250
250
250
230
230
230
230
230
230
230
230
230
230
210
210
Semiconductor Ltd.
Data Sheet
15
XC6404 Series
High Current, High Speed LDO Regulators, Voltage Detector Function
! TEST CIRCUITS
# Circuit 1
XC6404A ~ C Series
VIN
A
A
VROUT
CIN=1uF
(ceramic)
CL=**uF
(ceramic)
VSS
V
V
VIN
EN
RL
VDOUT
V
XC6404D Series
VIN
A
A
VROUT
CIN=1uF
(ceramic)
CL=**uF
(ceramic)
VSS
V
V
VIN
RL
CE VDOUT
V
XC6404E Series
VIN
A
A
VROUT
CIN= 1uF
(Ceramic)
CL= **uF
(Ceramic)
VSS
V
RL
VDOUT
VSEN
VIN
XC6404F Series
VIN
A
VROUT
CIN=1uF
(ceramic)
VSS
A
CL=**uF
(ceramic)
V
VIN
Cd
RL
VDOUT
Output Capacitor Corresponding Chart
VROUT
CL
0.9 ~1.2V
more than 4.7µF
1.3 ~ 1.7V
more than 2.2µF
1.8V ~ 5.1V
more than 1.0µF
Semiconductor Ltd.
Data Sheet
16
XC6404 Series
High Current, High Speed LDO Regulators, Voltage Detector Function
! TEST CIRCUITS (Continued)
# Circuit 2
XC6404A ~ C Series
VIN
VROUT
A
CIN=1uF
(ceramic)
VSS
VIN
A
EN
VDOUT
XC6404D Series
VIN
VROUT
A
CIN=1uF
(ceramic)
VSS
VIN
A
CE
VDOUT
XC6404E Series
VIN
A
VROUT
CIN=1uF
(ceramic)
VSS
VDOUT
VSEN
VIN
XC6404F Series
VIN
A
VROUT
CIN=1uF
(ceramic)
VSS
VDOUT
VIN
Cd
Semiconductor Ltd.
Data Sheet
17
XC6404 Series
High Current, High Speed LDO Regulators, Voltage Detector Function
! TEST CIRCUITS (Continued)
# Circuit 3
XC6404A ~ C Series
VIN
VROUT ≤ 1.25V
VIN={2.25V}VDC
+0.5Vp-pAC
VROUT
~
VIN={VROUT+1.0V}VDC
+0.5Vp-pAC
CL=**uF
(ceramic)
VSS
V
VDOUT
EN
~V
IROUT=50mA
VROUT ≥ 4.75V
VIN={5.75V}VDC
+0.5Vp-pAC
XC6404D Series
VIN
VROUT ≤ 1.25V
VIN={2.25V}VDC
+0.5Vp-pAC
VROUT
CL=**uF
(ceramic)
VSS
~V
VIN={VROUT+1.0V}VDC
+0.5Vp-pAC
VDOUT
CE
~V
IROUT=50mA
VROUT ≥ 4.75V
VIN={5.75V}VDC
+0.5Vp-pAC
XC6404E Series
VIN
VROUT ≤ 1.25V
VIN={2.25V}VDC
+0.5Vp-pAC
VROUT
CL=**uF
(ceramic)
VSS
~V
VIN={VROUT+1.0V}VDC
+0.5Vp-pAC
VDOUT
~V
IROUT=50mA
VSEN
VROUT ≥ 4.75V
VIN={5.75V}VDC
+0.5Vp-pAC
XC6404F Series
VIN
VROUT ≤ 0.9V
VIN={2.0V}VDC
+0.5Vp-pAC
VROUT
~V
VIN={VROUT+1.0V}VDC
+0.5Vp-pAC
CL=**uF
(ceramic)
VSS
Cd
VDOUT
~V
IROUT=50mA
VROUT ≥ 4.75V
VIN={5.75V}VDC
+0.5Vp-pAC
Output Capacitor Corresponding Chart
VROUT
CL
0.9 ~1.2V
more than 4.7µF
1.3 ~ 1.7V
more than 2.2µF
1.8 ~ 5.1V
more than 1.0µF
Semiconductor Ltd.
Data Sheet
18
XC6404 Series
High Current, High Speed LDO Regulators, Voltage Detector Function
! TEST CIRCUITS (Continued)
# Circuit 4
XC6404A ~ C Series
[VD Sense, VIN type]
[VD Sense, VROUT type]
VIN
VIN
VROUT
VROUT
CL=1uF
(ceramic)
VIN
EN
CL=1uF
(ceramic)
100kΩ
VSS
VIN
VDOUT
100kΩ
VSS
VDOUT
EN
V
V
XC6404D Series
[VD Sense, VIN type]
[VD Sense, VROUT type]
VIN
VIN
VROUT
CL=1uF
(ceramic)
VIN
VROUT
100kΩ
VSS
CE
CL=1uF
(ceramic)
VDOUT
100kΩ
VSS
VIN
CE
VDOUT
V
V
XC6404E Series
VIN
VROUT
CL=1uF
(ceramic)
100kΩ
VSS
VDOUT
VSEN
VIN
V
XC6404F Series
[VD Sense, VIN type]
[VD Sense, VROUT type]
VIN
VIN
VROUT
CL=1uF
(ceramic)
VROUT
CL=1uF
(ceramic)
VSS
VDOUT
VIN
Cd
VSS
VDOUT
VIN
A
Cd
VDS
A
VDS
Semiconductor Ltd.
Data Sheet
19
XC6404 Series
High Current, High Speed LDO Regulators, Voltage Detector Function
! TEST CIRCUITS (Continued)
# Circuit 5
XC6404A ~ C Series
[VD Sense, VIN type]
[VD Sense, VROUT type]
VIN
VIN
VROUT
CL=1uF
(ceramic)
VROUT
CL=1uF
(ceramic)
VSS
VDOUT
VIN
EN
VSS
VIN
A
VDOUT
EN
A
VDS
VDS
XC6404D Series
[VD Sense, VIN type]
[VD Sense, VROUT type]
VIN
VIN
VROUT
CL=1uF
(ceramic)
VROUT
CL=1uF
(ceramic)
VSS
VDOUT
VIN
CE
VSS
VIN
A
VDOUT
CE
A
VDS
VDS
XC6404E Series
VIN
VROUT
CL=1uF
(ceramic)
VSS
VDOUT
VSEN
VIN
A
VDS
XC6404F Series
[VD Sense, VIN type]
[VD Sense, VROUT type]
VIN
VIN
VROUT
CL=1uF
(ceramic)
VROUT
CL=1uF
(ceramic)
VSS
VDOUT
VIN
Cd
VSS
VDOUT
VIN
A
Cd
VDS
A
VDS
Semiconductor Ltd.
Data Sheet
20
XC6404 Series
High Current, High Speed LDO Regulators, Voltage Detector Function
! TEST CIRCUITS (Continued)
# Circuit 6
XC6404F Series
[VD Sense, VIN type]
VIN
VROUT
CL=1uF
(ceramic)
VSS
VDOUT
VIN
Cd
A
[VD Sense, VROUT type]
VIN
VROUT
CL=1uF
(ceramic)
VSS
VDOUT
VIN
Cd
A
Semiconductor Ltd.
Data Sheet
21
XC6404 Series
High Current, High Speed LDO Regulators, Voltage Detector Function
! BLOCK DIAGRAMS
Optional:
Active HIGH with Pull-down R
Active HIGH with no Pull-down R
Active LOW with Pull-up R
Active LOW with no Pull-up R
VIN
toggle FF
EN
ON / OFF
Control
T
Q
Optional:
VIN SENSE
VROUT SENSE
VR circuit
R
Current
Limit
1 Shot
Pulse
Power ON
Clear
for FF
Error Amp.
CFB
Optional
(B Series)
Voltage
Reference
VDOUT
VROUT
R2
R1
R4
Optional:
R3
Comp. VD
VSS
Detect H
Detect L
XC6404A, B Series
VIN
EN / CE
VR circuit (C Series)
each circuit (D Series)
ON / OFF
Control
Optional:
VIN SENSE
VROUT SENSE
Current
Limit
Optional:
Active HIGH with Pull-down R
Active HIGH with no Pull-down R
Active LOW with Pull-up R
Active LOW with no Pull-up R
Error Amp.
CFB
Voltage
Reference
VDOUT
Optional:
Detect H
Detect L
VROUT
R2
R1
R4
Comp. VD
R3
VSS
XC6404C, D Series
Semiconductor Ltd.
Data Sheet
22
XC6404 Series
High Current, High Speed LDO Regulators, Voltage Detector Function
! BLOCK DIAGRAMS (Continued)
VIN
VSEN
Current
Limit
VROUT
Error Amp.
CFB
Voltage
Reference
VDOUT
R2
R1
R4
R3
Comp. VD
Optional:
VSS
Detect H
Detect L
XC6404E Series
VIN
Optional:
Current
Limit
Rdelay
VROUT
Error Amp.
CFB
Rdelay
Voltage
Reference
VDOUT
Optional:
VIN SENSE
VROUT SENSE
R2
R1
R4
R3
Comp. VD
VSS
Detect H
Detect L
XC6404F Series
Semiconductor Ltd.
Data Sheet
23
XC6404 Series
High Current, High Speed LDO Regulators, Voltage Detector Function
! OPERATIONAL EXPLANATION
<Output voltage regulator control>
The voltage, divided by resistors R1 & R2 which are connected to the VROUT pin is compared with the internal reference voltage by the error amplifier.
The P-Channel MOSFET, which is connected to the VROUT pin, is then driven by the subsequent output signal. The output voltage at the VROUT pin is
controlled & stabilized by negative feedback.
The current limit circuit and short circuit protection operate in relation to the level of output current. Further, the voltage regulator's internal circuitry can be
shutdown via the EN or CE pin's signal.
<Detector function with the XC6404 series>
The series' detector function monitors the voltage divided by resistors R3 & R4 which are connected to the VROUT pin or the VIN pin or the VSEN pin, as
well as monitoring the voltage of the internal reference voltage source via the comparator. The VDSEN pin has options (please refer to the Selection
Guide, item 4 on page 2). A 'High' or 'Low' signal level can be output from the VDOUT pin when the VD pin voltage level goes below the detect voltage.
The VD output logic has options (please refer to the Selection Guide, item 5 on page 2). As VDOUT is an open-drain N-channel output, a pull-up resistor
of about 220KΩ is needed to achieve a voltage output. Because of hysteresis at the detector function, output at the VDOUT pin will invert when the
detect voltage level increases above the release voltage (105% of the detect voltage). Even when the XC6404A, B, C, series are in stand-by mode, the
voltage detector function operates and the output voltage at VDOUT will output according to the voltage level at VDSENSE voltage.
For the XC6404A, B, C type, in stand-by, if a voltage of the recovery voltage is present at the VROUT pin (from another power source), the VDOUT pin
will be high impedance mode, and the pull up voltage will be output at VDOUT. By connecting the Cdelay pin to a capacitor (Cd), the XC6404F series
can apply a delay time to VDOUT voltage when releasing voltage. The delay time can be calculated from the internal resistance, Rdelay (2MΩ fixed) and
the value of Cd as per the following equation.
Delay Time = Cdelay x Rdelay x 0.7
Delay Time
Rdelay standard : 1.0 ~ 3.5MΩ
TYP : 2.0MΩ
Cdelay
DELAY TIME (TYP.)
DELAY TIME (TYP.)
0.01 µF
0.022 µF
14 msec
30.8 msec
7.0 ~ 24.5 msec
15.4 ~ 53.9 msec
0.047 µF
65.8 msec
32.9 ~ 115.15 msec
0.1 µF
140 msec
70.0 ~ 245.0 msec
0.22 µF
308 msec
154.0 ~ 539.0 msec
0.47 µF
658 msec
329.0 ~ 1151.5 msec
1 µF
1400 msec
700.0 ~ 2450.0 msec
<Low ESR Capacitors>
With the XC6404 series regulator, a stable output voltage is achievable even if low ESR capacitors are used, as a phase compensation circuit is built-in
to the regulator. In order to ensure the effectiveness of the phase compensation, we suggest that an output capacitor (CL) be connected as close as
possible, between the output pin (VROUT) and the VSS pin. Please use an output capacitor (CL) with a capacitance, based on the chart below. We also
suggest an input capacitor (CIN) of 1µF : this should be connected between VIN and VSS in order to stabilize input power source.
Output Capacitor
VROUT
0.9 ~1.2V
1.3 ~ 1.7V
1.8 ~ 5.1V
CL
more than 4.7µF
more than 2.2µF
more than 1.0µF
<Current Limiter, Short-Circuit Protection>
The XC6404 series regulator offers a combination of current limit and circuit protection by means of a built-in fixed current limiter circuit and a foldback
circuit. When the load current reaches the current limit level, the fixed current limiter circuit operates and output voltage drops. As a result of this drop in
output voltage, the foldback circuit operates, the output voltage drops further and output current decreases. When the output pin is shorted, a current of
about 50mA flows.
Semiconductor Ltd.
Data Sheet
24
XC6404 Series
High Current, High Speed LDO Regulators, Voltage Detector Function
! OPERATIONAL EXPLANATION (Continued)
<EN / CE Pin>
The IC's internal regulator circuitry can be shut down via the signal from the EN pin with the XC6404A, B, C series. In shutdown mode, output at the
VROUT pin will be pulled down to the VSS level via R1 & R2. The whole IC's circuitry can be shut down via CE pin with the XC6404D series and power
consumption can be reduced to around 0 µA. While the voltage detector is in shutdown mode, the voltage detector output is in a post-detection state.
When choosing Detect L, input current can be set by using the following formula.
Input Current = VIN voltage / Pull Up Resistance
In stand-by mode, the above input current can be reduced by connecting a pull-up resistor between VROUT and VDOUT.
Note that as the XC6404*E to K types of the XC6404A to D series are 'Active HIGH / No Pull Down' and XC6404*R to U types of the XC6404A to D
series are 'Active LOW / No Pull Up', operations will become unstable with the CE pin open (See the chart below).
( * A ~ D Series)
SERIES
EN/CE INPUT LOGIC
XC6404 * A ~ D
Active HIGH with pull down
XC6404 * E ~ K
Active HIGH with no pull down
XC6404 * L ~ P
Active LOW with pull up
XC6404 * R ~ U
Active LOW with no pull up
We suggest that you use this IC with either a VIN voltage or a VSS voltage input at the EN or CE pin. If this IC is used with the correct specifications for
the EN or CE pin, the IC will operate normally. However, supply current may increase as a result of through current in the IC's internal circuitry if a
voltage other than VIN or VSS is applied.
<Toggle Operation>
The XC6404 A and B series have a built-in toggle ON/OFF switch which repeats an on/off operation via the EN pin's leading edge signal when the EN
logic is Active HIGH, and via the EN pin's falling edge signal when the EN logic is Active LOW (Please also refer the figure below). The EN input signal
duration should be over 500nsec. If the EN input signal is less than 500nsec, it is possible that the circuit fails to respond and the toggle function does
not operate. To operate the toggle function properly when the EN pin voltage noise is large, a RC filter should be used to reduce the noise in the signal
to the EN pin. In the case where input delay time is required, it is possible to set the time constant by connecting an RC network to the EN pin.
1.5kΩ
VIN
CIN
1uF
EN
Rpull
0.1uF
VSS
220kΩ
VROUT
VDOUT
VIN
CL
1uF
Internal Circuit - Response time
apporx. 10usec.
VROUT Voltage
GND
VROUT Voltage
VIN Voltage
GND
EN pin signal
More than
500nsec
EN Logic Active "HIGH"
Semiconductor Ltd.
Data Sheet
25
XC6404 Series
High Current, High Speed LDO Regulators, Voltage Detector Function
! OPERATIONAL EXPLANATION (Continued)
<Toggle Operation> (Continued)
For the XC6404B series, there are two types of toggle selection; one is a T-type flip-flop (T-FF) used for toggle operation which can be reset internally by
a signal directly from the voltage detector (VIN Sense type only. See also the Selection Guide on page 2). The other type is where the reset is applied
internally through a one shot pulse circuit (VIN, VROUT type only. See also the Selection Guide on page 2).
The type, which applies the reset directly via the signal from the voltage detector function, applies the voltage detector comparator's output signal (reset
signal) to the reset of T-FF reset, and turns the VR output OFF when the input voltage decreases below the detect voltage due to battery consumption,
etc.. In order to return the VR output, apply a voltage larger than the release voltage to VIN and input a toggle signal to the T-FF. In the case where
input voltage is below the release voltage, the VR output does not return even though the toggle signal is input into the T-FF.
The type which applies the reset signal to the T-FF internally via a one-shot pulse circuit changes the voltage detector comparator output signal to a oneshot signal internally. Like the type which applies the reset directly via the signal from voltage detector function, this type also applies the reset to the TFF and sets the VR output to OFF when the input voltage (VIN Sense type) and output voltage (VROUT Sense type) drop below the detect voltage level.
This type can return the VR output by inputting a toggle signal, even when the Sense pin voltage (VIN or VROUT pin voltage) is below the release
voltage.
Please refer to the block diagram below and the timing chart on the following page. Please choose the option suitable to the application.
A
EN
VIN
toggle FF
D
ON/OFF
control
Q
T
Toggle Signal
VR circuit
R
T-FF Reset Signal
Current
limit
B
C
Pulse
Error Amp. CFB
Optional
Optional
E
1 Shot
Power ON
Clear for FF
Voltage
Reference
R2
VROUT
R1
F
VDOUT
R4
Comp. VD
R3
VSS
Block Diagram for XC6404B series Timing Chart
Semiconductor Ltd.
Data Sheet
26
XC6404 Series
High Current, High Speed LDO Regulators, Voltage Detector Function
! TIMING CHART
" Using the VD output level signal as the reset signal of T-FF (VD Sense = VIN PIN)
Lithium Ion
4. 2V
A
Voltage
Release Voltage
# VIN PIN
Detect Voltage
V SS
Intrenal
IC
Response Time
About
E#
VROUT PIN
20usec
Internal
Internal
IC Response Time
About
20usec
IC
Response TIme
About
20usec
VROUT
Voltage
VS S
VIN
D
# Toggle Signal
VSS
B
F
Reset Signal (VD Comp
Output Signal)
# T-FF Reset Signal
Pull-up
# VDOUT PIN Voltage
Detect L
VSS
" Changing the VD output level signal into a one shot pulse to use T-FF as the reset signal (VD Sense = VIN PIN)
Lithium
Ion
Voltage
Release Voltage
4.2V
A
# VIN PIN
Detect Voltage
VSS
Intrenal IC Response Time
About 20usec
E
Internal IC Response Time
About 20usec
Internal IC Response Time
About 20usec
Internal IC Response TIme
About
20usec
VROUT
Voltage
# VROUT PIN
VSS
VIN
D
# Toggle Signal
.
VSS
C
# T-FF Reset Signal
Reset Signal (1 Shot Pulse)
Pull-up
Voltage
F
# VDOUT PIN
Detect L
VSS
" Changing the VD output level signal into a one shot pulse to use T-FF as the reset signal (VD Sense = VROUT PIN)
Lithium Ion Voltage
4.2V
A
# VIN PIN
VSS
Intrenal IC Response Time
E
VROUT
Voltage
About 20usec
Internal IC Response TIme
Internal IC Response Time
About 20u sec
About 20u
sec
Internal IC Response TIme
About 20u
sec
Release Voltage
# VROUT PIN
Detect Voltage
VSS
VIN
D
# Toggle Signal
VSS
C
# T-FF Reset Signal
Reset Signal ( 1 Shot Pulse)
Pull-up
Voltage
F
# VDOUT PIN
Detect L VSS
The circled letters correspond to those shown on the block diagram on page 26.
Semiconductor Ltd.
Data Sheet
27
XC6404 Series
High Current, High Speed LDO Regulators, Voltage Detector Function
!
NOTES ON USE
1. Please use this IC within the stated absolute maximum ratings. The IC is liable to malfunction should the ratings be exceeded.
2. Where wiring impedance is high, operations may become unstable due to noise and/or phase lag depending on output current.
Please strengthen VIN and VSS wiring in particular.
3. Please wire the input capacitor (CIN) and the output capacitor (CL) as close to the IC as possible.
Should rapid input fluctuation or load fluctuation occur, please increase the capacitor value such as CIN or CL
to stabilize the operation.
Semiconductor Ltd.
Data Sheet
28
XC6404 Series
High Current, High Speed LDO Regulators, Voltage Detector Function
! TYPICAL PERFORMANCE CHARACTERISTICS
(1) VR Output Voltage vs. VR Output Current
XC6404 Series (VR : 1.8V)
XC6404 Series (VR : 1.8V)
VIN=3.8V
CIN=1.0uF (ceramic), CL=1.0uF (ceramic)
CIN=1.0uF (ceramic), CL=1.0uF (ceramic)
2.5
Output Voltage VROUT(V)
Output Voltage VROUT(V)
2.5
2.0
1.5
Topr = 25OC
Topr = - 40OC
Topr = 85OC
1.0
0.5
0.0
2.0
1.5
1.0
VIN=3.8V
VIN=2.1V
VIN=6.0V
0.5
0.0
0
100
200
300
400
500
600
700
0
100
Output Current IROUT(mA)
XC6404 Series (VR : 2.5V)
CIN=1.0uF (ceramic), CL=1.0uF (ceramic)
3.0
3.0
Output Voltage VROUT (V)
Output Voltage VROUT(V)
700
XC6404 Series (VR : 2.5V)
VIN=4.5V
CIN=1.0uF (ceramic), CL=1.0uF (ceramic)
2.5
Topr = 25OC
Topr = - 40OC
Topr = 85OC
2.0
1.5
1.0
0.5
2.5
2.0
VIN=4.5V
VIN=2.8V
VIN=6.0V
1.5
1.0
0.5
0.0
0.0
0
100
200
300
400
500
600
0
700
100 200 300 400 500 600
Output Current IROUT(mA)
Output Current IROUT(mA)
XC6404 Series (VR : 3.0V)
CIN=1.0uF (ceramic), CL=1.0uF (ceramic)
4.0
3.5
3.5
Output Voltage VROUT (V)
4.0
3.0
2.5
2.0
1.5
1.0
O
Topr = 25 C
Topr = - 40OC
Topr = 85OC
0.5
0.0
0
100
200
300
400
500
700
XC6404 Series (VR : 3.0V)
VIN=5.0V
CIN=1.0uF (ceramic), CL=1.0uF (ceramic)
Output Voltage VROUT(V)
200 300 400 500 600
Output Current IROUT(mA)
600
3.0
VIN=5.0V
2.5
VIN=6.0V
2.0
1.5
1.0
0.5
0.0
700
0
Output Current IROUT(mA)
100
200
300
400
500
600
700
Output Current IROUT(mA)
Semiconductor Ltd.
Data Sheet
29
XC6404 Series
High Current, High Speed LDO Regulators, Voltage Detector Function
(1) VR Output Voltage vs. VR Output Current (Continued)
XC6404 Series (VR : 5.0V)
XC6404 Series (VR : 5.0V)
VIN=6.0V
CIN=1.0uF (ceramic), CL=1.0uF (ceramic)
CIN=1.0uF (ceramic), CL=1.0uF (ceramic)
6.0
Output Voltage VROUT (V)
Output Voltage VROUT(V)
6.0
5.0
Topr = 25OC
Topr = - 40OC
Topr = 85OC
4.0
3.0
2.0
1.0
0.0
5.0
4.0
VIN=6.0V
3.0
2.0
1.0
0.0
0
100
200
300
400
500
600
700
Output Current IROUT(mA)
0
100 200 300 400 500 600
Output Current IROUT (mA)
XC6404 Series (VR : 0.9V)
XC6404 Series (VR : 0.9V)
VIN=2.9V
CIN=1.0uF (ceramic), CL=4.7uF (ceramic)
CIN=1.0uF (ceramic), CL=4.7uF (ceramic)
1.5
Output Voltage VROUT(V)
1.5
Output Voltage VROUT(V)
700
1.2
0.9
0.6
Topr = 25OC
Topr = - 40OC
Topr = 85OC
0.3
1.2
0.9
0.6
VIN=2.0V
VIN=2.9V
VIN=6.0V
0.3
0.0
0.0
0
100
200
300
400
500
600
0
700
100
200
300
400
500
600
700
Output Current IROUT(mA)
Output Current IROUT(mA)
Semiconductor Ltd.
Data Sheet
30
XC6404 Series
High Current, High Speed LDO Regulators, Voltage Detector Function
(2) VR Output Voltge vs. Input Voltage
XC6404 Series (VR : 1.8V)
XC6404 Series (VR : 1.8V)
Topr=25OC
CIN=1.0uF (ceramic), CL=1.0uF (ceramic)
O
Topr=25 C
CIN=1.0uF (ceramic), CL=1.0uF (ceramic)
1.90
Output Voltatge VROUT (V)
Output Voltage VROUT (V)
2.0
1.8
1.6
1.4
IOUT=
1.2
0mA
1mA
30mA
100mA
1.85
1.80
IOUT=
1.75
1.70
0mA
1mA
30mA
100mA
1.0
1.3
1.8
1.65
2.3
3.0
Input Voltage VIN (V)
3.5
4.0
4.5
5.0
5.5
6.0
Input Voltage VIN (V)
XC6404 Series (VR : 2.5V)
Topr=25OC
CIN=1.0uF (ceramic), CL=1.0uF (ceramic)
2.7
Topr=25OC
CIN=1.0uF (ceramic), CL=1.0uF (ceramic)
2.6
Output Voltage VROUT(V)
Output Voltage VROUT (V)
XC6404 Series (VR : 2.5V)
2.5
2.3
2.1
IOUT=
1.9
0mA
1mA
30mA
100mA
1.7
2.6
2.5
2.5
IOUT=
2.4
2.4
2.0
2.5
Input Voltage VIN (V)
3.0
3.0
XC6404 Series (VR : 3.0V)
Topr=25 C
CIN=1.0uF (ceramic), CL=1.0uF (ceramic)
3.10
Output Voltage VROUT (V)
3.2
3.0
2.8
2.6
2.4
2.2
2.5
IOUT=
0mA
1mA
30mA
100mA
3.0
Input Voltage VIN (V)
3.5
4.0
4.5
5.0
5.5
Input Voltage VIN (V)
6.0
XC6404 Series (VR : 3.0V)
O
Output Voltage VROUT (V)
0mA
1mA
30mA
100mA
3.05
3.00
2.95
2.90
2.85
4.0
3.5
Topr=25OC
CIN=1.0uF (ceramic), CL=1.0uF (ceramic)
IOUT=
0mA
1mA
30mA
100mA
4.5
5.0
5.5
Input Voltage VIN (V)
6.0
Semiconductor Ltd.
Data Sheet
31
XC6404 Series
High Current, High Speed LDO Regulators, Voltage Detector Function
(2) VR Output Voltge vs. Input Voltage (Continued)
XC6404 Series (VR : 5.0V)
Topr=25OC
CIN=1.0uF (ceramic), CL=1.0uF (ceramic)
XC6404 Series (VR : 5.0V)
Topr=25OC
CIN=1.0uF (ceramic), CL=1.0uF (ceramic)
5.10
Output Voltage VROUT (V)
Output Voltage VROUT (V)
5.2
5.0
4.8
IOUT=
4.6
4.4
4.2
4.5
0mA
1mA
30mA
100mA
5.0
5.05
5.00
4.95
IOUT=
4.90
4.85
5.5
5.2
Input Voltage VIN (V)
XC6404 Series (VR : 0.9V)
1.20
IROUT=
0mA
1mA
30mA
100mA
Output Voltage VROUT (V)
Output Voltage VROUT (V)
Topr=25 C
CIN=1.0uF (ceramic), CL=4.7uF (ceramic)
1.1
0.9
0.8
0.6
1.2
1.4
1.6
1.8
5.3
5.4 5.5 5.6 5.7 5.8
Input Voltage VIN (V)
5.9
6
XC6404 Series (VR : 0.9V)
O
1.2
0mA
1mA
30mA
100mA
1.05
0.90
IROUT=
0.75
0.60
2.0
2.0
Input Voltage VIN (V)
Topr=25OC
CIN=1.0uF (ceramic), CL=4.7uF (ceramic)
3.0
4.0
0mA
1mA
30mA
100mA
5.0
6.0
Input Voltage VIN (V)
Semiconductor Ltd.
Data Sheet
32
XC6404 Series
High Current, High Speed LDO Regulators, Voltage Detector Function
(3) Dropout Voltage vs. VR Output Current
XC6404 Series (VR : 1.8V)
XC6404 Series (VR : 2.5V)
CIN=1.0uF (ceramic), CL=1.0uF (ceramic)
1.0
0.8
Dropout Voltage Vdif (V)
Dropout Voltage Vdif (V)
1.0
Topr = 85OC
25OC
- 40OC
0.6
0.4
0.2
0.0
0.8
Topr = 85OC
25OC
- 40OC
0.6
0.4
0.2
0.0
0
50
100
150
VR Output Current IROUT (mA)
200
0
XC6404 Series (VR : 3.0V)
Dropout Voltage Vdif (V)
0.6
200
CIN=1.0uF (ceramic), CL=1.0uF (ceramic)
1.0
Topr = 85OC
25OC
- 40OC
0.8
50
100
150
VR Output Current IROUT(mA)
XC6404 Series (VR : 5.0V)
CIN=1.0uF (ceramic), CL=1.0uF (ceramic)
1.0
Dropout Voltage Vdif (V)
CIN=1.0uF (ceramic), CL=1.0uF (ceramic)
0.4
0.2
0.0
Topr = 85OC
25OC
- 40OC
0.8
0.6
0.4
0.2
0.0
0
50
100
150
200
0
VR Output Current IROUT (mA)
50
100
150
200
VR Output Current IROUT (mA)
XC6404 Series (VR : 0.9V)
CIN=1.0uF (ceramic), CL=4.7uF (ceramic)
Dropout Voltage Vdif (V)
1.6
Topr = 85OC
25OC
- 40OC
1.4
1.2
1.0
0.8
0.6
0
50
100
150
VR Output Current IROUT (mA)
200
Semiconductor Ltd.
Data Sheet
33
XC6404 Series
High Current, High Speed LDO Regulators, Voltage Detector Function
(4) Supply Current vs. Input Voltage
XC6404 Series (VR : 1.8V)
CIN=1.0uF (ceramic), CL=1.0uF (ceramic)
50
Supply Current ISS (uA)
Supply Current ISS (uA)
50
XC6404 Series (VR : 2.5V)
40
30
20
Topr = 85OC
25OC
- 40OC
10
0
0.0
1.0
2.0
3.0
4.0
5.0
Input Voltage VIN (V)
CIN=1.0uF (ceramic), CL=1.0uF (ceramic)
40
30
20
Topr = 85OC
25OC
- 40OC
10
0
0.0
6.0
Supply Current ISS (uA)
Suppy Current ISS (uA)
50
40
30
20
0
0.0
Topr = 85OC
25OC
- 40OC
1.0
2.0
3.0
4.0
5.0
Input Voltage VIN (V)
3.0
4.0
5.0
6.0
XC6404 Series (VR : 5.0V)
CIN=1.0uF (ceramic), CL=1.0uF (ceramic)
10
2.0
Input Voltage VIN (V)
XC6404 Series (VR : 3.0V)
50
1.0
CIN=1.0uF (ceramic), CL=1.0uF (ceramic)
40
30
20
10
0
0.0
6.0
Topr = 85OC
25OC
- 40OC
1.0
2.0
3.0
4.0
5.0
6.0
Input Voltage VIN (V)
XC6404 Series (VR : 0.9V)
Supply Current ISS (uA)
50.0
40.0
30.0
20.0
10.0
0.0
0.0
1.0
2.0
3.0
4.0
5.0
Input Voltage VIN (V)
6.0
Semiconductor Ltd.
Data Sheet
34
XC6404 Series
High Current, High Speed LDO Regulators, Voltage Detector Function
(5) VR Output Voltage vs. Ambient Temperature
XC6404 Series (VR : 1.8V)
2.00
2.70
1.95
IOUT=
1.90
1.85
Output Voltage VROUT (V)
Output Voltage VROUT (V)
XC6404 Series (VR : 2.5V)
VIN=2.8V
CIN=1.0uF (ceramic), CL=1.0uF (ceramic)
0mA
30mA
100mA
1.80
1.75
1.70
1.65
1.60
VIN=3.5V
CIN=1.0uF (ceramic), CL=1.0uF (ceramic)
2.65
75
2.50
2.45
2.40
2.35
-25
0
25
50
75
100
-50
-25
5.20
3.20
3.05
Output Voltage VROUT (V)
3.15
3.10
25
100
XC6404 Series (VR : 5.0V)
VIN=4.0V
CIN=1.0uF (ceramic), CL=1.0uF (ceramic)
IOUT=
0
Ambient Temperature Topr (OC)
XC6404 Series (VR : 3.0V)
Output Voltage VROUT (V)
50
2.55
Ambient Temperature Topr (OC)
0mA
30mA
100mA
3.00
2.95
2.90
2.85
2.80
VIN=6.0V
CIN=1.0uF (ceramic), CL=1.0uF (ceramic)
5.15
IOUT=
0mA
30mA
100mA
50
75
5.10
5.05
5.00
4.95
4.90
4.85
4.80
-50
-25
0
25
50
75
100
-50
-25
0
25
100
Ambient Temperature Topr (OC)
O
Ambient Temperature Topr ( C)
Output Voltage VROUT (V)
0mA
30mA
100mA
2.30
-50
1.10
IOUT=
2.60
XC6404 Series (VR : 0.9V)
VIN=2.0V
CIN=1.0uF (ceramic), CL=4.7uF (ceramic)
1.05
1.00
IOUT=
0mA
30mA
100mA
50
75
0.95
0.90
0.85
0.80
0.75
0.70
-50
-25
0
25
100
Ambient Temperature Topr (OC)
Semiconductor Ltd.
Data Sheet
35
XC6404 Series
High Current, High Speed LDO Regulators, Voltage Detector Function
(6) Supply Current vs. Ambient Temperature
XC6404 Series (VR : 1.8V)
VIN=2.8V
50
VIN=3.5V
50
40
Supply Current ISS(uA)
Supply Current ISS(uA)
XC6404 Series (VR : 2.5V)
30
20
10
0
40
30
20
10
0
-50
-25
0
25
50
75
Ambient Temperature Topr (OC)
100
-50
25
50
75
100
XC6404 Series (VR : 5.0V)
VIN=4.0V
VIN=6.0V
50
40
Supply Current ISS (uA)
Supply Current ISS (uA)
0
Ambient Temperature Topr (OC)
XC6404 Series (VR : 3.0V)
50
-25
30
20
10
0
40
30
20
10
0
-50
-25
0
25
50
75
Ambient Temperature Topr (OC)
100
-50
-25
0
25
50
75
100
Ambient Temperature Topr (OC)
XC6404 Series (VR : 0.9V)
Supply Current ISS(uA)
50
40
30
20
10
0
-50
-25
0
25
50
75
100
O
Ambient Temperature Topr ( C)
Semiconductor Ltd.
Data Sheet
36
XC6404 Series
High Current, High Speed LDO Regulators, Voltage Detector Function
(8) Rdelay vs. Ambient Temperature
VIN=VROUT+1.0V, IOUT=30mA
CIN=CL=1.0uF (ceramic)
1.10
4
3.5
Delay Resistance (MΩ)
EN/CE Threshold Voltage VEN/CEH, VEN/CEL
(V)
(7) EN/CE Threshold Voltage vs. Ambient Temperature
H Level Voltage
1.00
0.90
0.80
L Level Voltage
3
2.5
2
1.5
1
0.5
0.70
0
-50
-25
0
25
50
75
100
-50
-25
0
25
50
75
100
O
Ambient Temperature Topr ( C)
Ambient Temperature Topr (OC)
(9) Output Noise Density
Output Noise Density (uV/RootHz)
XC6404 Series (VR : 3.0V)
VIN=4.0V
IOUT=10mA CL=10uF (ceramic)
10
1
0.1
0.01
0.1
1
10
Frequency f (kHz)
100
Semiconductor Ltd.
Data Sheet
37
XC6404 Series
High Current, High Speed LDO Regulators, Voltage Detector Function
(10) VD Supply Current vs. Input Voltage (A, B, C Types only)
XC6404 Series (VD : 2.0V)
XC6404 Series (VD : 2.7V)
25
VD Supply Current ISS (uA)
VD Supply Current ISS (uA)
25
Topr = 85OC
25OC
- 40OC
20
15
10
5
20
Topr = 85OC
25OC
- 40OC
15
10
5
0
0
0
1
2
3
4
5
0
6
1
Input Voltage VIN (V)
XC6404 Series (VD : 3.6V)
3
4
5
6
XC6404 Series (VD : 5.0V)
25
25
20
VD Supply Current ISS (uA)
VD Supply Current ISS (uA)
2
Input Voltage VIN (V)
Topr = 85OC
25OC
- 40OC
15
10
5
Topr = 85OC
25OC
- 40OC
20
15
10
5
0
0
0
1
2
3
4
5
0
6
1
2
3
4
5
6
Input Voltage VIN (V)
Input Voltage VIN (V)
Semiconductor Ltd.
Data Sheet
38
XC6404 Series
High Current, High Speed LDO Regulators, Voltage Detector Function
(11) Detect Voltage, Release Voltage vs. Ambient Temperature
XC6404 Series (VD : 2.7V)
Detect Voltage, Release Voltage VDF,VDR (V)
Detect Voltage, Release Voltage VDF,VDR (V)
XC6404 Series (VD : 2.0V)
2.20
VDR
2.15
2.10
2.05
VDF
2.00
1.95
1.90
-50
-25
0
25
50
75
100
2.85
2.80
VDR
2.75
2.70
2.65
VDF
2.60
-50
-25
3.80
3.75
VDR
3.70
3.65
3.60
VDF
3.50
-25
0
25
50
50
75
100
XC6404 Series (VD : 5.0V)
Detect Voltage, Release Voltage VDF,VDR (V)
Detect Voltage, Release Voltage VDF,VDR (V)
XC6404 Series (VD : 3.6V)
-50
25
Ambient Temperature Topr (OC)
Ambient Temperature Topr (OC)
3.55
0
75
100
5.40
5.30
VDR
5.20
5.10
5.00
VDF
4.90
-50
-25
0
25
50
75
100
O
Ambient Temperature Topr ( C)
Ambient Temperature Topr (OC)
Semiconductor Ltd.
Data Sheet
39
XC6404 Series
High Current, High Speed LDO Regulators, Voltage Detector Function
(12) VD Nch Driver Output Current vs. VDS Characteristics
XC6404 Series (VD : 2.4V)
XC6404 Series (VD : 2.7V)
Topr =25OC
Topr =25OC
16
7
Output Current IOUT (mA)
Output Current IOUT (mA)
8
VIN=2.0V
6
5
4
3
2
14
VIN=2.5V
12
10
VIN=2.0V
8
6
VIN=1.5V
4
1
2
0
0
VIN=1.0V
0
0.5
1
1.5
2
2.5
0
3
0.5
1.5
2
2.5
3
VDS (V)
VDS (V)
XC6404 Series (VD : 3.6V)
XC6404 Series (VD : 5.0V)
Topr =25OC
24
Topr =25OC
40
21
VIN=3.0V
Output Current IOUT (mA)
Output Current IOUT (mA)
1
18
15
12
VIN=2.5V
9
VIN=2.0V
6
3
35
VIN=4.5V
30
25
VIN=3.5V
20
VIN=3.0V
15
VIN=2.5V
10
VIN=2.0V
5
VIN=1.5V
VIN=1.5V
0
0
0
1
2
3
0
4
1
2
3
4
5
VDS (V)
VDS (V)
Semiconductor Ltd.
Data Sheet
40
XC6404 Series
High Current, High Speed LDO Regulators, Voltage Detector Function
(13) VD Nch Driver Output Current vs. Input Voltage
XC6404 Series (VD : 2.0V)
XC6404 Series (VD : 2.7V)
15
VDS=0.5V
6
Output Current IOUT (mA)
Output Current IOUT (mA)
8
- 40OC
25OC
4
2
85OC
0
VDS=0.5V
12
25OC
9
6
3
85OC
0
0
0.5
1
1.5
2
2.5
0
1
Input Voltage VIN (V)
2
3
4
Input Voltage VIN (V)
XC6404 Series (VD : 3.6V)
XC6404 Series (VD : 5.0V)
15
25
VDS=0.5V
12
Output Current IOUT (mA)
Output Current IOUT (mA)
- 40OC
- 40OC
25OC
9
6
85OC
3
0
VDS=0.5V
20
- 40OC
25OC
15
10
5
85OC
0
0
1
2
3
4
0
Intput Voltage VIN (V)
1
2
3
4
5
6
Input Voltage VIN (V)
Semiconductor Ltd.
Data Sheet
41
XC6404 Series
High Current, High Speed LDO Regulators, Voltage Detector Function
(14) Line Transient Response
1.95
1.90
Input Voltage
2
1.85
1
1.80
Output Voltage
-1
1.75
4
2
1.85
1
1.80
1.70
Time (40usec/div)
XC6404 Series (VR : 2.5V)
IOUT=1mA, tr=tf=5.0usec
CL=1.0uF (ceramic), Topr=25OC
6
4
1.95
5
2.65
3
1.90
4
2.60
Input Voltage
1
0
1.85
1.80
Output Voltage
-1
1.75
Input Voltage VIN (V)
2
Output Voltage VOUT (V)
2.00
5
Input Voltage VIN (V)
1.75
Output Voltage
-1
XC6404 Series (VR : 1.8V)
3
1
1.70
2.70
4
2.60
2
1
2.55
2.50
Output Voltage
0
2.45
6
Input Voltage VIN (V)
2.65
Input Voltage
Output Voltage
2.45
2.40
XC6404 Series (VR : 2.5V)
5
3
2.50
Time (40usec/div)
Output Voltage VOUT (V)
6
2.70
2.55
0
XC6404 Series (VR : 2.5V)
IOUT=30mA, tr=tf=5.0usec
CL=1.0uF (ceramic), Topr=25OC
Input Voltage
2
Time (40usec/div)
Input Voltage VIN (V)
1.90
Input Voltage
Time (40usec/div)
IOUT=100mA, tr=tf=5.0usec
CL=1.0uF (ceramic), Topr=25OC
1.95
3
0
1.70
2.00
Output Voltage VOUT (V)
0
IOUT=30mA, tr=tf=5.0usec
CL=1.0uF (ceramic), Topr=25OC
2.65
4
2.60
3
Input Voltage
2
2.55
2.50
Output Voltage
0
Time (40usec/div)
2.70
5
1
2.40
IOUT=100mA, tr=tf=5.0usec
CL=1.0uF (ceramic), Topr=25OC
2.45
Output Voltage VOUT (V)
3
5
Input Voltage VIN (V)
Input Voltage VIN (V)
4
2.00
Output Voltage VOUT (V)
5
IOUT=1mA, tr=tf=5.0usec
CL=1.0uF (ceramic), Topr=25OC
XC6404 Series (VR : 1.8V)
Output Voltage VOUT (V)
XC6404 Series (VR : 1.8V)
2.40
Time (40usec/div)
Semiconductor Ltd.
Data Sheet
42
XC6404 Series
High Current, High Speed LDO Regulators, Voltage Detector Function
(14) Line Transient Response (Continued)
3.15
5
3.10
Input Voltage
3
3.05
2
3.00
Output Voltage
0
2.95
3
3.05
2
3.00
Input Voltage
XC6404 Series (VR : 5.0V)
8
3.15
7
5.15
6
5.10
3.10
3
3.05
2
3.00
1
Output Voltage
0
2.95
5
5.00
4.95
Output Voltage
2
4.90
Time (40usec/div)
Time (40usec/div)
XC6404 Series (VR : 5.0V)
XC6404 Series (VR : 5.0V)
IOUT=100mA, tr=tf=5.0usec
CL=1.0uF (ceramic), Topr=25OC
8
7
5.15
7
5.15
6
5.10
6
5.10
Input Voltage
4
3
5.05
5.00
Output Voltage
2
4.95
Input Voltage VIN (V)
5
Output Voltage VOUT (V)
5.20
8
Input Voltage VIN (V)
5.20
5.05
Input Voltage
4
3
2.90
IOUT=30mA, tr=tf=5.0usec
CL=1.0uF (ceramic), Topr=25OC
IOUT=1mA, tr=tf=5.0usec
CL=1.0uF (ceramic), Topr=25OC
3.20
Input Voltage VIN (V)
4
2.90
Time (40usec/div)
Output Voltage VOUT (V)
Input Voltage VIN (V)
5
2.95
Output Voltage
0
XC6404 Series (VR : 3.0V)
IOUT=100mA, tr=tf=5.0usec
CL=1.0uF (ceramic), Topr=25OC
3.10
Input Voltage
Time (40usec/div)
6
3.15
4
1
2.90
3.20
Output Voltage VOUT (V)
1
IOUT=30mA, tr=tf=5.0usec
CL=1.0uF (ceramic), Topr=25OC
5
Input Voltage
4
5.20
5.05
5.00
4.95
3
Output Voltage VOUT (V)
4
6
Input Voltage VIN (V)
Input Voltage VIN (V)
5
3.20
Output Voltage VOUT (V)
6
IOUT=1mA, tr=tf=5.0usec
CL=1.0uF (ceramic), Topr=25OC
XC6404 Series (VR : 3.0V)
Output Voltage VOUT (V)
XC6404 Series (VR : 3.0V)
Output Voltage
2
4.90
4.90
Time (40usec/div)
Time (40usec/div)
Semiconductor Ltd.
Data Sheet
43
XC6404 Series
High Current, High Speed LDO Regulators, Voltage Detector Function
(14) Line Transient Response (Continued)
2
1.10
Input Voltage
1
0
1.00
0.90
Output Voltage
-1
0.80
Input Voltage VIN (V)
3
4
1.20
Output Voltage VROUT (V)
Input Voltage VIN (V)
4
IOUT=1mA, tr=tf=5.0usec
CL=4.7uF (ceramic), Topr=25OC
XC6404 Series (VR : 0.9V)
IOUT=30mA, tr=tf=5.0usec
CL=4.7uF (ceramic), Topr=25OC
3
2
1.10
Input Voltage
1
0
1.00
0.90
Output Voltage
-1
0.70
1.20
0.80
Output Voltage VROUT (V)
XC6404 Series (VR : 0.9V)
0.70
Time (40usec/div)
Time (40usec/div)
XC6404 Series (VR : 0.9V)
3
2
1.10
Input Voltage
1
0
1.20
1.00
0.90
Output Voltage
-1
0.80
Output Voltage VROUT (V)
Input Voltage VIN (V)
4
IOUT=100mA, tr=tf=5.0usec
CL=4.7uF (ceramic), Topr=25OC
0.70
Time (40usec/div)
Semiconductor Ltd.
Data Sheet
44
XC6404 Series
High Current, High Speed LDO Regulators, Voltage Detector Function
(15) Load Transient Response
XC6404 Series (VR : 1.8V)
XC6404 Series (VR : 1.8V)
200
Output Voltage
1.7
150
1.6
100
1.5
50
1.9
250
1.8
200
Output Voltage
1.7
150
1.6
100
1.5
50
Output Current
Output Current
0
1.4
Time (20usec/div)
Time (20usec/div)
1.6
100
1.5
1.4
Output Voltage VOUT (V)
2.6
150
50
Output Current
Output Voltage VOUT (V)
Output Voltage
0
VIN=2.5V, tr=tf=5.0usec
CIN=CL=1.0uF (ceramic), Topr=25OC
2.5
2.4
Output Voltage
100
2.2
50
2.1
0
Time (20usec/div)
XC6404 Series (VR : 2.5V)
XC6404 Series (VR : 2.5V)
2.5
Output Voltage
2.4
150
2.3
100
2.2
2.6
250
200
50
VIN=2.5V, tr=tf=5.0usec
CIN=CL=1.0uF (ceramic), Topr=25OC
2.5
250
200
Output Voltage
2.4
150
2.3
100
2.2
50
Output Current
Output Current
2.1
150
Output Current
Time (20usec/div)
VIN=2.5V, tr=tf=5.0usec
CIN=CL=1.0uF (ceramic), Topr=25OC
250
200
2.3
Output Voltage VOUT (V)
1.7
200
Output Current IOUT (mA)
1.8
2.6
250
Output Current IOUT (mA)
Output Voltage VOUT (V)
1.9
XC6404 Series (VR : 2.5V)
Output Current IOUT (mA)
XC6404 Series (VR : 1.8V)
VIN=2.8V, tr=tf=5.0usec
CIN=CL=1.0uF (ceramic), Topr=25OC
0
Output Current IOUT (mA)
1.4
Output Current IOUT (mA)
250
Output Voltage VOUT (V)
1.8
VIN=2.8V, tr=tf=5.0usec
CIN=CL=1.0uF (ceramic), Topr=25OC
Output Current IOUT (mA)
Output Voltage VOUT (V)
1.9
VIN=2.8V, tr=tf=5.0usec
CIN=CL=1.0uF (ceramic), Topr=25OC
0
2.1
Time (20usec/div)
0
Time (20usec/div)
Semiconductor Ltd.
Data Sheet
45
XC6404 Series
High Current, High Speed LDO Regulators, Voltage Detector Function
(15) Load Transient Response (Continued)
3.1
200
Output Voltage
2.9
150
2.8
100
Output Current
1mA
50
2.6
3.0
Output Voltage
2.9
150
2.8
100
2.7
2.8
150
100
2.7
50
Output Voltage VOUT (V)
Output Voltage
5.1
250
Output Current IOUT (mA)
Output Voltage VOUT (V)
XC6404 Series (VR : 5.0V)
200
2.9
0
Time (20usec/div)
XC6404 Series (VR : 3.0V)
3.0
50
Output Current
Time (20usec/div)
3.1
250
200
2.6
0
VIN=4.0V, tr=tf=5.0usec
CIN=CL=1.0uF (ceramic), Topr=25OC
VIN=4.0V, tr=tf=5.0usec
CIN=CL=1.0uF (ceramic), Topr=25OC
VIN=6.0V, tr=tf=5.0usec
CIN=CL=1.0uF (ceramic), Topr=25OC
5.0
4.9
250
200
Output Voltage
150
4.8
100
Output Current
4.7
50
4.6
0
Output Current IOUT (mA)
2.7
Output Voltage VOUT (V)
3.0
250
Output Current IOUT (mA)
Output Voltage VOUT (V)
3.1
VIN=4.0V, tr=tf=5.0usec
CIN=CL=1.0uF (ceramic), Topr=25OC
XC6404 Series (VR : 3.0V)
Output Current IOUT (mA)
XC6404 Series (VR : 3.0V)
Output Current
0
Time (20usec/div)
Time (20usec/div)
XC6404 Series (VR : 5.0V)
200
Output Voltage
4.9
150
4.8
100
4.7
50
Output Current
4.6
Output Voltage VOUT (V)
5.0
5.1
250
Output Current IOUT (mA)
Output Voltage VOUT (V)
5.1
VIN=6.0V, tr=tf=5.0usec
CIN=CL=1.0uF (ceramic), Topr=25OC
XC6404 Series (VR : 5.0V)
VIN=6.0V, tr=tf=5.0usec
CIN=CL=1.0uF (ceramic), Topr=25OC
5.0
250
200
Output Voltage
4.9
150
4.8
100
4.7
50
Output Current
4.6
0
Time (20usec/div)
Outptu Current IOUT (mA)
2.6
0
Time (20usec/div)
Semiconductor Ltd.
Data Sheet
46
XC6404 Series
High Current, High Speed LDO Regulators, Voltage Detector Function
(15) Load Transient Response (Continued)
Output Voltage
250
0.90
200
0.85
150
0.80
Output Current
0.75
100
50
0.70
1.00
Output Voltage VOUT (V)
0.95
300
Output Current IOUT (mA)
Output Voltage VOUT (V)
1.00
VIN=2.0V, tr=tf=5.0usec
CIN=1uF, CL=4.7uF (ceramic), Topr=25OC
XC6404 Series (VR : 0.9V)
0
0.95
VIN=2.0V, tr=tf=5.0usec
CIN=1uF, CL=4.7uF (ceramic), Topr=25OC
Output Voltage
250
0.90
200
0.85
150
0.80
100
0.75
Output Current
0.70
Time (20usec/div)
300
50
Output Current IOUT (mA)
XC6404 Series (VR : 0.9V)
0
Time (20usec/div)
XC6404 Series (VR : 0.9V)
0.95
Output Voltage
300
250
0.90
200
0.85
150
0.80
100
0.75
50
Output Current IOUT (mA)
Output Voltage VOUT (V)
1.00
VIN=2.0V, tr=tf=5.0usec
CIN=1uF, CL=4.7uF (ceramic), Topr=25OC
Output Current
0.70
0
Time (20usec/div)
Semiconductor Ltd.
Data Sheet
47
XC6404 Series
High Current, High Speed LDO Regulators, Voltage Detector Function
(16) Ripple Rejection Rate
XC6404 Series (VR : 0.9V)
XC6404 Series (VR : 1.8V)
VIN=2.5VDC+1.0Vp-pAC
IOUT=50mA, CL=4.7uF (ceramic)
VIN=2.8VDC+1.0Vp-pAC
IOUT=50mA, CL=1.0uF (ceramic)
90
Ripple Rejection Rate RR (dB)
Ripple Rejection Rate RR (dB)
90
80
70
60
50
40
30
20
10
0
0.01
0.1
1
10
80
70
60
50
40
30
20
10
0
100
0.01
Ripple Frequency f (kHz)
XC6404 Series (VR : 2.5V)
10
100
VIN=4.0VDC+1.0Vp-pAC
IOUT=50mA, CL=1.0uF (ceramic)
90
80
Ripple Rejection Rate RR (dB)
Ripple Rejection Rate RR (dB)
1
XC6404 Series (VR : 3.0V)
VIN=3.5VDC+1.0Vp-pAC
IOUT=50mA, CL=1.0uF (ceramic)
90
0.1
Ripple Frequency f (kHz)
70
60
50
40
30
20
10
0
80
70
60
50
40
30
20
10
0
0.01
0.1
1
10
100
0.01
Ripple Frequency f (kHz)
0.1
1
10
100
Ripple Frequency f (kHz)
XC6404 Series (VR : 5.0V)
VIN=5.75VDC+0.5Vp-pAC
IOUT=50mA, CL=1.0uF (ceramic)
Ripple Rejection Rate RR (dB)
90
80
70
60
50
40
30
20
10
0
0.01
0.1
1
10
Ripple Frequency f (kHz)
100
Semiconductor Ltd.
Data Sheet
48
XC6404 Series
High Current, High Speed LDO Regulators, Voltage Detector Function
(17) Rising Response Time
4
4
2
Input Voltage
0
3
-2
2
-6
1
0
3
-2
2
5
4
0
3
-2
2
-4
Output Voltage
-6
1
4
Input Voltage VIN (V)
Input Voltage
0
2
-2
2
-4
4
5
4
3
-2
2
Output Voltage
1
0
XC6404 Series (VR : 2.5V)
0
-4
Output Voltage
Time (20usec/div)
1
Input Voltage VIN (V)
Input Voltage
4
Input Voltage
-6
Output Voltage VOUT (V)
Input Voltage VIN (V)
2
5
3
XC6404 Series (VR : 2.5V)
4
IOUT=1mA, tr=5.0usec
VIN=0 ! 3.5V, CL=1.0uF (ceramic)
0
Time (20usec/div)
IOUT=30mA, tr=5.0usec
VIN=0 ! 3.5V, CL=1.0uF (ceramic)
0
XC6404 Series (VR : 2.5V)
Output Voltage VOUT (V)
Input Voltage VIN (V)
2
1
Time (20usec/div)
XC6404 Series (VR : 1.8V)
4
Output Voltage
-6
Time (20usec/div)
IOUT=100mA, tr=5.0usec
VIN=0 ! 2.8V, CL=1.0uF (ceramic)
4
Input Voltage
-4
0
5
Output Voltage VOUT (V)
Output Voltage
IOUT=30mA, tr=5.0usec
VIN=0 ! 2.8V, CL=1.0uF (ceramic)
2
IOUT=100mA, tr=5.0usec
VIN=0 ! 3.5V, CL=1.0uF (ceramic)
Input Voltage
5
4
0
3
-2
2
-4
1
Output Voltage VOUT (V)
-4
Input Voltage VIN (V)
2
5
Output Voltage VOUT (V)
Input Voltage VIN (V)
4
IOUT=1mA, tr=5.0usec
VIN=0 ! 2.8V, CL=1.0uF (ceramic)
XC6404 Series (VR : 1.8V)
Output Voltage VOUT (V)
XC6404 Series (VR : 1.8V)
Output Voltage
-6
0
-6
Time (20usec/div)
0
Time (20usec/div)
Semiconductor Ltd.
Data Sheet
49
XC6404 Series
High Current, High Speed LDO Regulators, Voltage Detector Function
(17) Rising Response Time (Continued)
XC6404 Series (VR : 3.0V)
IOUT=1mA, tr=5.0usec
VIN=0 ! 4.0V, CL=1.0uF (ceramic)
4
3
1
3
-1
2
Output Voltage
-5
1
Input Voltage
1
3
-1
2
-3
XC6404 Series (VR : 3.0V)
XC6404 Series (VR : 5.0V)
IOUT=1mA, tr=5.0usec
VIN=0 ! 6.0V, CL=1.0uF (ceramic)
IOUT=100mA, tr=5.0usec
VIN=0 ! 4.0V, CL=1.0uF (ceramic)
5
7
4
5
3
-1
2
-3
Output Voltage
1
Input Voltage VIN (V)
1
Output Voltage VOUT (V)
Input Voltage VIN (V)
Input Voltage
0
Time (20usec/div)
Time (20usec/div)
3
1
Output Voltage
-5
0
5
4
10
8
Input Voltage
3
6
1
4
-1
2
Output Voltage
-3
-5
0
XC6404 Series (VR : 5.0V)
8
3
6
1
4
-1
Output Voltage
-3
2
Input Voltage VIN (V)
Input Voltage
7
Output Voltage VOUT (V)
Input Voltage VIN (V)
XC6404 Series (VR : 5.0V)
IOUT=30mA, tr=5.0usec
VIN=0 ! 6.0V, CL=1.0uF (ceramic) 10
5
0
Time (20usec/div)
Time (20usec/div)
7
Output Voltage VOUT (V)
-3
5
0
IOUT=100mA, tr=5.0usec
VIN=0 ! 6.0V, CL=1.0uF (ceramic)
5
Input Voltage
8
3
6
1
4
-1
Output Voltage
-3
Time (20usec/div)
10
2
Output Voltage VOUT (V)
Input Voltage
5
Input Voltage VIN (V)
Input Voltage VIN (V)
3
5
Output Voltage VOUT (V)
5
IOUT=30mA, tr=5.0usec
VIN=0 ! 4.0V, CL=1.0uF (ceramic)
Output Voltage VOUT (V)
XC6404 Series (VR : 3.0V)
0
Time (20usec/div)
Semiconductor Ltd.
Data Sheet
50
XC6404 Series
High Current, High Speed LDO Regulators, Voltage Detector Function
(17) Rising Response Time (Continued)
2
1.25
Input Voltage
1
1.00
0
0.75
-1
0.50
-2
3
1.50
0.25
Input Voltage VIN (V)
Input Voltage VIN (V)
3
Output Voltage VOUT (V)
IOUT=1mA, tr=5.0usec
VIN=0 ! 2.0V, CL=4.7uF (ceramic)
XC6404 Series (VR : 0.9V)
IOUT=30mA, tr=5.0usec
VIN=0 ! 2.0V, CL=4.7uF (ceramic)
2
1
1.50
1.25
Input Voltage
1.00
0
0.75
-1
0.50
-2
Output Voltage
Output Voltage VOUT (V)
XC6404 Series (VR : 0.9V)
0.25
Output Voltage
-3
0.00
-3
Time (20usec/div)
0.00
Time (20usec/div)
XC6404 Series (VR : 0.9V)
Input Voltage VIN (V)
2
1.50
1.25
Input Voltage
1
1.00
0
0.75
-1
0.50
-2
Output Voltage
-3
0.25
Output Voltage VOUT (V)
IOUT=100mA, tr=5.0usec
VIN=0 ! 2.0V, CL=4.7uF (ceramic)
3
0.00
Time (20usec/div)
Semiconductor Ltd.
Data Sheet
51
XC6404 Series
High Current, High Speed LDO Regulators, Voltage Detector Function
(18) EN/CE Rising Response Time
XC6404 Series (VR : 1.8V)
XC6404 Series (VR : 1.8V)
VIN=2.8V, IOUT=1mA, tr=5.0usec
VEN/CE=0 ! 2.8V, CL=1.0uF (ceramic)
VIN=2.8V, IOUT=30mA, tr=5.0usec
VEN/CE=0 ! 2.8V, CL=1.0uF (ceramic)
4
EN/CE Input Voltage
0
3
-2
2
-6
1
0
2
0
3
-2
2
-4
XC6404 Series (VR : 2.5V)
EN/CE Input Voltage
0
3
-2
2
1
EN/CE Voltage VEN/CE (V)
4
-4
4
5
Output Voltage VOUT (V)
EN/CE Voltage VEN/CE (V)
2
0
3
-2
2
-4
XC6404 Series (VR : 2.5V)
4
VIN=3.5V, IOUT=30mA, tr=5.0usec
VEN/CE=0 ! 3.5V, CL=1.0uF (ceramic)
5
EN/CE Input Voltage
0
3
-2
2
-4
1
EN/CE Voltage VEN/CE (V)
5
Output Voltage VOUT (V)
EN/CE Voltage VEN/CE (V)
0
Time (20usec/div)
4
2
4
EN/CE Input Voltage
0
3
-2
2
-4
1
Output Voltage
-6
Output Voltage
-6
1
Output Voltage
XC6404 Series (VR : 2.5V)
2
4
EN/CE Input Voltage
Time (20usec/div)
4
5
-6
0
VIN=3.5V, IOUT=30mA, tr=5.0usec
VEN/CE=0 ! 3.5V, CL=1.0uF (ceramic)
VIN=3.5V, IOUT=1mA, tr=5.0usec
VEN/CE=0 ! 3.5V, CL=1.0uF (ceramic)
2
Output Voltage
-6
0
Time (20usec/div)
XC6404 Series (VR : 1.8V)
4
1
Output Voltage
-6
Time (20usec/div)
VIN=2.8V, IOUT=100mA, tr=5.0usec
VEN/CE=0 ! 2.8V, CL=1.0uF (ceramic)
4
EN/CE Input Voltage
Output Voltage VOUT (V)
Output Voltage
5
Output Voltage VOUT (V)
-4
EN/CE Voltage VEN/CE (V)
2
4
Output Voltage VOUT (V)
5
Output Voltage VOUT (V)
EN/CE Voltage VEN/CE (V)
4
0
0
Time (20usec/div)
Time (20usec/div)
Semiconductor Ltd.
Data Sheet
52
XC6404 Series
High Current, High Speed LDO Regulators, Voltage Detector Function
(18) EN/CE Rising Response Time (Continued)
XC6404 Series (VR : 3.0V)
1
3
-1
2
-3
Output Voltage
-5
1
3
1
3
-1
2
Output Voltage
0
-3
1
-5
0
Time (20usec/div)
Time (20usec/div)
XC6404 Series (VR : 3.0V)
XC6404 Series (VR : 5.0V)
VIN=4.0V, IOUT=100mA, tr=5.0usec
VEN/CE=0 ! 4.0V, CL=1.0uF (ceramic)
EN/CE Input Voltage
4
1
3
-1
2
Output Voltage
-3
-5
1
EN/CE Voltage VEN/CE (V)
3
7
5
Output Voltage VOUT (V)
EN/CE Voltage VEN/CE (V)
5
5
1
4
-1
1
4
2
EN/CE Voltage VEN/CE (V)
6
Output Voltage VOUT (V)
EN/CE Voltage VEN/CE (V)
7
10
3
-3
2
0
XC6404 Series (VR : 5.0V)
8
Output Voltage
Output Voltage
Time (20usec/div)
EN/CE Input Voltage
-1
8
EN/CE Input Voltage
6
XC6404 Series (VR : 5.0V)
5
10
3
Time (20usec/div)
7
VIN=6.0V, IOUT=1mA, tr=5.0usec
VEN/CE=0 ! 6.0V, CL=1.0uF (ceramic)
-3
0
VIN=6.0V, IOUT=30mA, tr=5.0usec
VEN/CE=0 ! 6.0V, CL=1.0uF (ceramic)
4
EN/CE Input Voltage
Output Voltage VOUT (V)
4
Output Voltage VOUT (V)
EN/CE Input Voltage
5
0
VIN=6.0V, IOUT=100mA, tr=5.0usec
VEN/CE=0 ! 6.0V, CL=1.0uF (ceramic)
5
8
EN/CE Input Voltage
3
6
1
4
-1
Output Voltage
-3
Time (20usec/div)
10
2
Output Voltage VOUT (V)
3
5
5
EN/CE Voltage VEN/CE (V)
EN/CE Voltage VEN/CE (V)
5
VIN=4.0V, IOUT=30mA, tr=5.0usec
VEN/CE=0 ! 4.0V, CL=1.0uF (ceramic)
Output Voltage VOUT (V)
VIN=4.0V, IOUT=1mA, tr=5.0usec
VEN/CE=0 ! 4.0V, CL=1.0uF (ceramic)
XC6404 Series (VR : 3.0V)
0
Time (20usec/div)
Semiconductor Ltd.
Data Sheet
53
XC6404 Series
High Current, High Speed LDO Regulators, Voltage Detector Function
(18) EN/CE Rising Response Time (Continued)
1.25
EN/CE Voltage
1
0
1.00
0.75
-1
0.50
Output Voltage
-2
0.25
-3
0.00
3
EN/CE Voltage VEN/CE (V)
2
1.50
Output Voltage VOUT (V)
EN/CE Voltage VEN/CE (V)
3
VIN=2.0V, IOUT=1mA, tr=5.0usec
VEN/CE=0 ! 2.0V, CL=4.7uF (ceramic)
XC6404 Series (VR : 0.9V)
VIN=2.0V, IOUT=30mA, tr=5.0usec
VEN/CE=0 ! 2.0V, CL=4.7uF (ceramic)
2
1
1.50
1.25
EN/CE Voltage
1.00
0
0.75
-1
0.50
-2
Output Voltage
-3
0.25
Output Voltage VOUT (V)
XC6404 Series (VR : 0.9V)
0.00
Time (20usec/div)
Time (20usec/div)
XC6404 Series (VR : 0.9V)
2
1.50
1.25
EN/CE Voltage
1
1.00
0
0.75
-1
0.50
Output Voltage
-2
0.25
-3
Output Voltage VOUT (V)
EN/CE Voltage VEN/CE (V)
3
VIN=2.0V, IOUT=100mA, tr=5.0usec
VEN/CE=0 ! 2.0V, CL=4.7uF (ceramic)
0.00
Time (20usec/div)
Semiconductor Ltd.
Data Sheet
54