XC74WL240ASR ETR1323_001 CMOS Logic ■GENERAL DESCRIPTION XC74WL240ASR is dual bus buffer manufactured using silicon gate CMOS processes. The small supply current, which is one of the features of the CMOS logic, gives way to high speed operations which enables LS-TTL. With wave forming buffers connected internally, stabilized output can be achieved as the series offers high noise immunity. As the series is integrated into a mini molded, MSOP-8B package, high density mounting is possible. ■APPLICATIONS ■FEATURES ●Palmtops High Speed Operations : tpd = 3.8ns (TYP.) (VCC=5V) Operating Voltage Range : 2V ~ 5.5V ●Digital equipment Low Power Consumption : 2μA (MAX.)@Ta=25℃ CMOS Logic Dual Bus Buffer (Inverted 3-state outputs) Small Package ■PIN CONFIGURATION : MSOP-8B ■FUNCTIONS G INPUT A OUTPUT Y H L L X H L Z L H H=High level L=Low level X=Don’t care Z=High impedance ■ABSOLUTE MAXIMUM RATINGS PARAMETER Supply Voltage Input Voltage Output Voltage Input Diode Current Output Diode Current Switch Output Current VCC,GND Current Power Dissipation (Ta = 25℃) Storage Temperature Range SYMBOL VCC VIN VOUT IIK IOK IOUT ICC,IGND Pd Tstg Ta=-40℃~85℃ RATINGS -0.5~+6.0 -0.5~+6.0 -0.5~VCC+0.5 -20 ±20 ±25 ±50 300 -65~+150 UNITS V V V mA mA mA mA mW ℃ Note : Voltage is all ground standardized. 1/6 XC74WL240ASR ■RECOMMENDED OPERATING CONDITIONS PARAMETER SYMBOL CONDITIONS UNITS Supply Voltage VCC 2~5.5 V Input Voltage VIN 0~5.5 V Output Voltage VOUT 0~VCC V Operating Temperature Range Topr -40~+85 ℃ Input Rise and Fall Time tr,tf 0~200(VCC=3.3V) ns 0~100(VCC=5V) ■DC ELECTRICAL CHARACTERISTICS PARAMETER SYMBOL CONDITIONS VCC(V) 2.0 VIH Input Voltage VIL MAX. 1.50 - - 1.50 - 2.10 - - 2.10 - - - 3.85 - 2.0 - - 0.50 - 0.50 3.0 - - 0.90 - 0.90 5.5 - - 1.65 - 1.65 1.90 2.00 - 1.90 - IOH=-50μA 2.90 3.00 - 2.90 - 4.40 4.50 - 4.40 - 3.0 IOH=-4mA 2.58 - - 2.48 - 4.5 IOH=-8mA 3.94 - - 3.80 - - - 0.10 - 0.10 - - 0.10 - 0.10 - - 0.10 - 0.10 - - 0.36 - 0.44 4.5 VIN=VIL IOL=50μA 3.0 4.5 VIN=VIH 3.0 IOL=4mA IOL=8mA UNITS V V V V - - 0.36 - 0.44 VIN=VIL or VIH, VOUT=VCC or GND -0.25 - 0.25 -2.50 2.50 μA 0~5.5 VIN=VCC or GND -0.10 - 0.1 -1.00 1.00 μA 5.5 VIN=VCC or GND - - 2.0 - 20.0 μA 4.5 3 State Off-Leak Current IOZ 5.0 Input Current IIN Static Supply Current ICC 2/6 MIN. 3.85 2.0 VOL MAX. 5.5 3.0 Output Voltage Ta=-40℃~85℃ TYP. 3.0 2.0 VOH Ta=25℃ MIN. XC74WL240ASR ■SWITCHING ELECTRICAL CHARACTERISTICS PARAMETER SYMBOL CL CONDITIONS VCC(V) 15pF tPLH 50pF Delay Time 15pF tPHL 50pF 15pF tZL 50pF Output Enable Time 15pF tZH 50pF (tr=tf=3ns) Ta=25℃ Ta=-40℃~85℃ MIN. TYP. MAX. MIN. MAX. 3.3 - 5.6 8.0 1.0 9.5 5.0 - 3.8 5.5 1.0 6.5 3.3 - 8.1 11.5 1.0 13.0 5.0 - 5.3 7.5 1.0 8.5 3.3 - 5.6 8.0 1.0 9.5 5.0 - 3.8 5.5 1.0 6.5 3.3 - 8.1 11.5 1.0 13.0 5.0 - 5.3 7.5 1.0 8.5 3.3 - 5.4 8.0 1.0 9.5 5.0 - 3.6 5.1 1.0 6.0 - 7.9 11.5 1.0 13.0 5.0 - 5.1 7.1 1.0 8.0 3.3 - 5.4 8.0 1.0 9.5 5.0 - 3.6 5.1 1.0 6.0 - 7.9 11.5 1.0 13.0 - 5.1 7.1 1.0 8.0 - 9.5 13.2 1.0 15.0 - 6.1 8.8 1.0 10.0 - 9.5 13.2 1.0 15.0 - 6.1 8.8 1.0 10.0 3.3 - - 1.5 - 1.5 5.0 - - 1.0 - 1.0 3.3 - - 1.5 - 1.5 5.0 - - 1.0 - 1.0 3.3 3.3 RL=1kΩ RL=1kΩ 5.0 3.3 UNITS ns ns ns ns ns ns ns ns ns tLZ 50pF tHZ 50pF tosLH 50pF tosHL 50pF Input Capacitance CIN - - - 4 10 - 10 pF Output Capacitance COUT - - - 6 - - - pF Power Dissipation Capacitance Cpd - - - 17 - - - pF Output Disable Time Output Pin Skew (Note) 5.0 3.3 5.0 RL=1kΩ RL=1kΩ ns ns ns Note: tOSLH and tosHL are the guaranteed parameters. tOSLH = I tPLHm – tPHLn I , tOSHL = I tPHLm – tPHLn I ■NOISE CHARACTERISTICS PARAMETER SYMBOL Non Functional Output Maximum Dynamic VOL (tr=tf=3ns) CL VCC(V) VOLP 50pF Non Functional Output Minimum Dynamic VOL VOLV Minimum Dnamic VIH Maximum Dnamic VIL CONDITIONS Ta=25℃ UNITS MIN. TYP. MAX. 5.0 - 0.5 0.8 V 50pF 5.0 -0.8 -0.5 - V VIHD 50pF 5.0 - - 3.5 V VILD 50pF 5.0 - - 1.5 V 3/6 XC74WL240ASR ■DELAY TIME ●Test Circuit ●Waveform 4/6 XC74WL240ASR ■OUTPUT ENABLE TIME, OUTPUT DISABLE TIME ●Test Circuit ●Waveform 5/6 XC74WL240ASR 1. The products and product specifications contained herein are subject to change without notice to improve performance characteristics. Consult us, or our representatives before use, to confirm that the information in this catalog is up to date. 2. We assume no responsibility for any infringement of patents, patent rights, or other rights arising from the use of any information and circuitry in this catalog. 3. Please ensure suitable shipping controls (including fail-safe designs and aging protection) are in force for equipment employing products listed in this catalog. 4. The products in this catalog are not developed, designed, or approved for use with such equipment whose failure of malfunction can be reasonably expected to directly endanger the life of, or cause significant injury to, the user. (e.g. Atomic energy; aerospace; transport; combustion and associated safety equipment thereof.) 5. Please use the products listed in this catalog within the specified ranges. Should you wish to use the products under conditions exceeding the specifications, please consult us or our representatives. 6. We assume no responsibility for damage or loss due to abnormal use. 7. All rights reserved. No part of this catalog may be copied or reproduced without the prior permission of Torex Semiconductor Ltd. 6/6