V5X5P, V15X5P, V15X10P Vishay Foil Resistors Bulk Metal® Foil Technology Discrete Chips with TCR of 2 ppm/°C and Tolerance to 0.005 % for use in Hybrid Circuits FEATURES FIGURE 1 - TRIMMING CHIP RESISTORS1) • Temperature coefficient of resistance (TCR): Absolute: ± 2.0 ppm/°C typical (- 55 °C to + 125 °C, + 25 °C ref.) Tracking: to 0.5 ppm/°C1, 2) V5X5P RoHS COMPLIANT • Resistance tolerance: Absolute to ± 0.01 % (user trimmable to ± 0.005 %) Match: to 0.01 % Trim Points Gold Plated Pads • Power rating: 50 to 150 mW at + 70 °C V15X5P • Load life stability: ± 0.05 % maximum at + 70 °C, 2000 h at rated power • Resistance range: 5 Ω to 80 kΩ (see table 2) • Short time overload: ≤ 0.02 % Gold Plated Pads • Electrostatic discharge (ESD) above 25 000 V V15X10P • Non inductive, non capacitive design • Rise time: 1 ns without ringing • Current noise: - 40 dB • Non inductive: < 0.08 µH • Non hot spot design Gold Plated Pads Vishay precision chip resistors offer an order of magnitude of improvement over other chip resistors in hybrid applications. With a maximum Temperature Coefficient of Resistance (TCR) of ± 5 ppm/°C, selected TCR tracking to 0.5 ppm/°C and factory supplied resistance tolerances to ± 0.01 %, they provide the user with accuracy and stability not available in other chip resistor products. If desired they can be user trimmed to any value within ± 0.005 %. The typical pattern and trimming illustrations show that the V5X5P resistor has 16 trimming points, the V15X5P has 20 and the V15X10P has 21. These trimming points are arranged around the chip periphery and are clearly indicated. Trimming to the desired resistance value and tolerance is accomplished by cutting the trim points, thereby producing specific incremental changes in the chip’s resistance value relative to the original prevalue; up to + 20 % for the V5X5P, + 30 % for the V15X5P, and + 50 % for the V15X10P (not all trim points need be used; the ΔR necessary to adjust the pre-value to the desired final value dictates which trim points neet to be used). Vishay precision chip resistors are designed to meet or exceed the requirements of MIL-PRF-55342 characteristic E. These discrete chips are available either factory trimmed to exact resistance values (option T) or ready for user trimming (option U). Monitoring of circuit output while “actively” trimming readily permits adjustment of the chip to ± 0.005 %. Actual trimming charts are supplied on request for all images. TABLE 1 - TOLERANCE AND TCR VERSUS RESISTANCE VALUE VALUE (Ω) STANDARD TOLERANCE (%) TYPICAL TCR AND MAX SPREAD - 55 °C to + 125 °C, + 25 °C Ref. (ppm/°C) 500 to 80K ± 0.01 ±2±3 100 to < 500 ± 0.01 ±2±4 50 to < 100 ± 0.01 ±2±5 20 to < 50 ± 0.02 ±2±6 10 to < 20 ± 0.05 ±2±8 5 to < 10 ± 0.10 ± 2 ± 10 Note • For tighter performances, please contact Vishay Application Engineering Document Number: 63024 Revision: 25-Oct-07 For any questions, contact: [email protected] www.vishay.com 1 V5X5P, V15X5P, V15X10P Vishay Foil Resistors Bulk Metal® Foil Technology Discrete Chips with TCR of 2 ppm/°C and Tolerance to 0.005 % for use in Hybrid Circuits FIGURE 2 - DIMENSIONS in inches (millimeters) 0.020 ± 0.005 (0.508 ± 0.127) 0.020 ± 0.005 (0.508 ± 0.127) 0.150 ± 0.005 (3.81 ± 0.127) V15X5P ( 0.483 +0.025 - 0.102 ) 0.005 ± 0.004 (1.27 ± 0.102) 0.029 + 0.001 - 0.004 V15X10P 0.019 + 0.001 - 0.004 0.025 ) ( 0.483 +- 0.102 0.050 ± 0.005 (1.27 ± 0.127) ( 0.737 +0.025 - 0.102 ) Square 0.008 (0.203) Nominal 0.008 (0.203) Nominal V5X5P 0.034 (0.864) 0.008 Nominal (0.203) Nominal 0.050 ± 0.005 (1.27 ± 0.127) + 0.001 0.019 - 0.004 0.005 ± 0.004 (1.27 ± 0.102) 0.100 ± 0.005 (2.54 ± 0.127) 0.050 ± 0.005 (1.27 ± 0.127) 0.150 ± 0.005 (3.81 ± 0.127) 0.001 0.029 + - 0.004 0.025 ( 0.737 +- 0.102 ) 0.020 ± 0.005 (0.508 ± 0.127) TABLE 2 - PRECISION CHIP RESISTOR SPECIFICATIONS2) Resistance range 5 Ω to 10 kΩ (model V5X5P) 5 Ω to 33 kΩ (model V15X5P) 33 kΩ to 80 kΩ (model V15X10P) Trimming range (Approximate adjustment capability) 0 to 1.2 x nominal prevalue (V5X5P)* 0 to 1.3 x nominal prevalue (V15X5P) 0 to 1.5 x nominal prevalue (V15X10P) Note * The V5X5P chips are being gradually redesigned for a higher trimming factor 1.3 or more instead of 1.2. For information about the availability of a specific resistance value, contact the factory. Resistance tolerance Option T (trimmed to value at Vishay)* ± 0.01 %; ± 0.02 %; ± 0.05 %; ± 0.1 %; ± 0.25 %; ± 0.5 %; ± 1 %; ± 5 % Option U (for user trimming to any value within ± 0.005 %) G.F. = Good for values Note * See table 1 for resistance/tolerance limits Load life stability 0.05 % ΔR maximum under full rated power for 2000 h at + 70 °C Power rating (at + 70 °C ambient temperature), (see figure 3) V5X5P: 0.05 W (22 V maximum) V15X5P: 0.1 W (54 V maximum) V15X10P: 0.15 W (100 V maximum) High frequency operation Rise time Inductance Capacitance 1 ns without ringing 0.1 µH maximum; 0.08 µH typical 1.0 pF maximum; 0.5 pF typical Current noise < 0.010 µV(rms)/V of applied voltage Voltage coefficient < - 40 dB Working voltage 22 V (model V5X5P) 54 V (model V15X5P) 100 V (model V15X10P) www.vishay.com 2 For any questions, contact: [email protected] Document Number: 63024 Revision: 25-Oct-07 V5X5P, V15X5P, V15X10P Bulk Metal® Foil Technology Discrete Chips Vishay Foil Resistors with TCR of 2 ppm/°C and Tolerance to 0.005 % for use in Hybrid Circuits TABLE 3 - ENVIRONMENTAL PERFORMANCE COMPARISON METHOD PARAGRAPH MIL-PRF-55342 CHARACTERISTIC E LIMITS TYPICAL VISHAY Test group I Thermal shock 4.8.3 ± 0.1 % ± 0.02 % Test group II Low temperature operation Short time overload High temperature exposure Resistance to bonding exposure 4.8.5 4.8.6 4.8.7 4.8.8 ± 0.1 % ± 0.1 % ± 0.1 % ± 0.2 % ± 0.005 % ± 0.02 % ± 0.02 % ± 0.02 % Test group III Moisture resistance 4.8.9 ± 0.2 % ± 0.1 % Test group IV Life 2000 h at + 70 °C 4.8.11 ± 0.5 % ± 0.04 % Notes 1. TCR Tracking is a measure of the similarity of resistance value change in two or more resistors which are undergoing the same temperature changes. Tracking could be expressed as the difference in the temperature coefficients of the resistors, expressed in ppm/°C as (ΔR1/R1 - ΔR2/R2) x 10-6/ΔT °C. 3. All measurements are based on pad-to-pad excluding termination wires. Maximum is 1.0 % A.Q.L. standard for all specifications except TCR (for TCR information, see table 1 and notes 1 and 2). 4. The resolution limit of existing test equipment. 2. Selected TCR Tracking is available for specially ordered lots of resistors. The selected TCR tracking can be 3, 2, 1 and as close as 0.5 ppm/°C throughout the full temperature range. Should close TCR tracking be required for differing resistance values, contact the factory. 5. Similar to MIL-Style RM0505 (MIL-PRF-55342/2). 6. Similar to MIL-Style RM1505 (MIL-PRF-55342/4). 7. When bonded to a ceramic substrate. FIGURE 3 - POWER DERATING CURVE Percent of Rated Power Discrete chips suitable for working temperatures of up to + 175 °C are available on request. + 125 - 55 °C FIGURE 4 - TRIMMING TO VALUES (Conceptual Illustration) + 70 °C Rated Power + 100 Current Path Before Trimming Interloop Capacitance Reduction in Series Current Path After Trimming Trimming Process Removes this Material from Shorting Strip Area Changing Current Path and Increasing Resistance + 75 Mutual Inductance Reduction due to Change in Current Direction + 50 + 25 0 - 75 - 50 - 25 0 + 25 + 50 + 75 + 100 Ambient Temperature (°C) Document Number: 63024 Revision: 25-Oct-07 + 125 + 150 Note: Foil shown in black, etched spaces in white For any questions, contact: [email protected] www.vishay.com 3 V5X5P, V15X5P, V15X10P Vishay Foil Resistors Bulk Metal® Foil Technology Discrete Chips with TCR of 2 ppm/°C and Tolerance to 0.005 % for use in Hybrid Circuits TABLE 4 - GLOBAL PART NUMBER INFORMATION (Trimmed Option) NEW GLOBAL PART NUMBER: Y4045249R000Q0W (preferred part number format) DENOTES PRECISION VALUE AER* Y R=Ω K = kΩ 0 = Standard 1 - 999 = Custom Y 4 0 4 5 2 4 9 R 0 0 0 Q 0 W PRODUCT CODE RESISTANCE TOLERANCE PACKAGING Trimmed**: 4045 = V5X5PT 4047 = V15X5PT 4475 = V15X10PT T = ± 0.01 % Q = ± 0.02 % A = ± 0.05 % B = ± 0.1 % C = ± 0.25 % D = ± 0.5 % F = ± 1.0 % J = ± 5.0 % W = Waffle Pack FOR EXAMPLE: ABOVE GLOBAL ORDER Y4045 249R000 Q 0 W: TYPE: V5X5P Trimmed VALUE: 249.0 Ω ABSOLUTE TOLERANCE: ± 0.02 % AER TYPE: Standard PACKAGING: Waffle Pack HISTORICAL PART NUMBER: V5X5PT 249R00 Q W (will continue to be used) V5X5PT 249R00 Q W MODEL OHMIC VALUE RESISTANCE TOLERANCE V5X5PT V15X5PT V15X10PT 249R00 = 249.0 Ω T = ± 0.01 % Q = ± 0.02 % A = ± 0.05 % B = ± 0.1 % C = ± 0.25 % D = ± 0.5 % F = ± 1.0 % J = ± 5.0 % PACKAGING W = Waffle Pack Notes * For non-standard requests, please contact Application Engineering. ** VISHAY to supply chips trimmed to the purchaser’s exact resistance and tolerance specifications, ready for insertion into a hybrid microcircuit with no further processing other than bonding and termination. Specify exact resistance value(s) and tolerance(s). www.vishay.com 4 For any questions, contact: [email protected] Document Number: 63024 Revision: 25-Oct-07 V5X5P, V15X5P, V15X10P Bulk Metal® Foil Technology Discrete Chips Vishay Foil Resistors with TCR of 2 ppm/°C and Tolerance to 0.005 % for use in Hybrid Circuits TABLE 5 - GLOBAL PART NUMBER INFORMATION (Untrimmed Option) NEW GLOBAL PART NUMBER: Y4044759R0000W (preferred part number format) DENOTES PRECISION GOOD FOR VALUE** PACKAGING Y R=Ω K = kΩ W = Waffle Pack Y 4 0 4 4 7 5 9 R 0 0 0 PRODUCT CODE AER* Untrimmed**: 4044 = V5X5PU 4046 = V15X5PU 4471 = V15X10PU 0 = Standard 1 - 999 = Custom 0 W FOR EXAMPLE: ABOVE GLOBAL ORDER Y4044 759R000 0 W: TYPE: V5X5P Untrimmed GOOD FOR VALUE: 759.0 Ω AER TYPE: Standard PACKAGING: Waffle Pack HISTORICAL PART NUMBER: V5X5PU 759R00 W (will continue to be used) V5X5PU 759R00 W MODEL GOOD FOR VALUE PACKAGING V5X5PU V15X5PU V15X10PU 759R00 = 759.0 Ω W = Waffle Pack Notes * For non-standard requests, please contact Application Engineering. ** To order user trimmable chips specify the final resistance value desired. Document Number: 63024 Revision: 25-Oct-07 For any questions, contact: [email protected] www.vishay.com 5 V5X5P, V15X5P, V15X10P Vishay Foil Resistors Bulk Metal® Foil Technology Discrete Chips with TCR of 2 ppm/°C and Tolerance to 0.005 % for use in Hybrid Circuits EFFECTS OF GOLD WIRE The bonding of the gold wires to the chip has an effect on the overall resistance and on the temperature coefficient, according to the length of wire used. The nomogram below shows the effect on both parameters with varying lengths of 0.001" (0.0254 mm) diameter gold wire. NOMOGRAM Change of resistance and TCR due to a length L of gold wire added at wire bonding. thousandths of an inch total length of 2 gold wires of 0.001" diameter 1 ΔR R L 500 360 % 250 160 120 A 90 62.5 40 22.5 ppm 10 Δ TCR ppm/°C 50 23 16 10.5 6 4 2.25 1.40 0.82 0.47 0.30 0.16 0.11 600 350 225 1900 1100 610 400 230 150 85 53 31 18 11 6.1 4.2 2.3 1.5 0.85 130 85 41 25 16 10 6 0.50 0.32 0.15 0.10 0.06 0.04 0.02 EXAMPLE: Total length of wires L = 0.100" (point A on left scale) Resistance of chip R = 200 Ω (point B on right scale) Read on intersection of line as with central scale: On left side - change of resistance: ΔR = 600 ppm R On right side - change of TCR: ΔTCR = ± 2.3 ppm Nomogram based on the following specs for gold wire: • Conductivity 72 % of copper • 1.2 Ω/inch for 0.001" (0.0254 mm) diameter wire • TCR 3900 ppm/°C www.vishay.com 6 For any questions, contact: [email protected] 1.4 R nominal resistance of chip as measured on its pads (Ω) 2.2 3.2 4 6.2 9 12.2 16 25 36 49 64 81 100 144 B 225 324 400 625 900 1.2K 1.6K 2.5K 3.6K 4.9K 6.4K 8.1K 10K 14.4K 22.5K 32.4K 40K Document Number: 63024 Revision: 25-Oct-07 Legal Disclaimer Notice Vishay Disclaimer All product specifications and data are subject to change without notice. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained herein or in any other disclosure relating to any product. Vishay disclaims any and all liability arising out of the use or application of any product described herein or of any information provided herein to the maximum extent permitted by law. The product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed therein, which apply to these products. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. The products shown herein are not designed for use in medical, life-saving, or life-sustaining applications unless otherwise expressly indicated. Customers using or selling Vishay products not expressly indicated for use in such applications do so entirely at their own risk and agree to fully indemnify Vishay for any damages arising or resulting from such use or sale. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. Product names and markings noted herein may be trademarks of their respective owners. Document Number: 91000 Revision: 18-Jul-08 www.vishay.com 1