Cylindrical Surface Mount Zerohm Jumpers Metal Glaze™ thick film element fired at 1000°C to solid ceramic substrate ZCHP Series • • • • Reliable Metal Glaze™ technology Available in all standard CHP sizes Superb solderability - reflow and wave Operating temperature -55°C to +150°C High temperature dielectric coating Solder over nickel barrier Applications Zerohm Jumpers or Crossovers are basically interconnection devices bewtween points on a PC board. Typically, they are used to connect two points on a PC board due to other circuit paths which must be crossed over. The XCHP Jumpers are available in four case sizes and are supplied on tape and reel to support high volume placement. Electrical Data Size Code Industry Footprint IRC Type Maximum Resistance (mΩ) Current Rating @ 25°C (amps)² B 1206 ZCHP 1/8 20 3 D 2010 ZCHP 1/2 30 4 F 2512 ZCHP 1 35 5 H 3610 ZCHP 2 35 6 ² Derate current to "0" amps at 150°C. Ordering Data Sample Part No. ZCHP 1 - 13 IRC Type (CHP 1/8, CHP 1/2, CHP 1, or CHP 2) Packaging Code* BLK = Bulk, 7 = 7" Reel, 13 = 13" Reel General Note IRC reserves the right to make changes in product specification without notice or liability. All information is subject to IRC’s own data and is considered accurate at time of going to print. © IRC Wire and Film Technologies Division • 4222 South Staples Street • Corpus Christi Texas 78411 USA Telephone: 361 992 7900 • Facsimile: 361 992 3377 • Website: www.irctt.com A subsidiary of TT electronics plc ZCHP Series Issue September 2008 Sheet 1 of 1