DIODES ZXTP19060CGTA

ZXTP19060CG
60V PNP medium transistor in SOT223
Summary
BVCEO > -60V
BVECO > -7V
IC(cont) = 5A
VCE(sat) < -80mV @ -1A
RCE(sat) = 50mV
PD = 3.0W
Complementary part number ZXTN19060CG
Description
C
Packaged in the SOT223 outline this new low saturation PNP transistor
offers extremely low on state losses making it ideal for use in DC-DC
circuits and various driving and power management functions.
B
Features
•
High Gain
•
Low saturation voltage
•
High peak current
•
7V reverse blocking voltage
E
Applications
E
•
High side driver
•
Motor drive
•
Load disconnect switch
C
C
B
Ordering information
Device
ZXTP19060CGTA
Reel size
(inches)
Tape width
(mm)
Quantity
per reel
7
12
1000
Pinout - top view
Device marking
ZXTP19060C
Issue 1- February 2008
© Zetex Semiconductors plc 2008
1
www.zetex.com
ZXTP19060CG
Absolute maximum ratings
Parameter
Symbol
Limit
Unit
Collector-Base voltage
VCBO
-60
V
Collector-Emitter voltage
VCEO
-60
V
Emitter-Collector voltage (reverse blocking)
VECX
-7
V
Emitter-Base voltage
VEBO
-7
V
Continuous Collector current(c)
IC
-5
A
Base current
IB
-1
A
Peak pulse current
ICM
-7
A
Power dissipation at TA =25°C(a)
PD
1.2
W
9.6
mW/°C
1.6
W
12.8
mW/°C
Linear derating factor
PD
Power dissipation at TA =25°C(b)
Linear derating factor
3.0
W
24
mW/°C
5.3
W
42
mW/°C
10.2
W
81
mW/°C
Tj, Tstg
-55 to 150
°C
PD
Power dissipation at TA =25°C(c)
Linear derating factor
PD
Power dissipation at TA =25°C(d)
Linear derating factor
PD
Power dissipation at TC =25°C(e)
Linear derating factor
Operating and storage temperature range
Thermal resistance
Parameter
Symbol
Limit
Unit
ambient(a)
RUJA
104
°C/W
Junction to ambient(b)
RUJA
78
°C/W
Junction to ambient(c)
RUJA
42
°C/W
Junction to ambient(d)
RUJA
23.5
°C/W
Junction to case(e)
RUJC
12.3
°C/W
Junction to
NOTES:
(a) For a device surface mounted on 15mm x 15mm x 0.6mm FR4 PCB with high coverage of single sided 1oz copper, in
still air conditions.
(b) Mounted on 25mm x 25mm x 0.6mm FR4 PCB with high coverage of single sided 1oz copper, in still air conditions.
(c) Mounted on 50mm x 50mm x 0.6mm FR4 PCB with high coverage of single sided 2oz copper, in still air conditions.
(d) As (c) above measured at t<5 seconds.
(e) Junction to case (collector tab). Typical
Issue 1- February 2008
© Zetex Semiconductors plc 2008
2
www.zetex.com
ZXTP19060CG
Thermal characteristics
V
CE(sat)
Limit
1
DC
1s
100ms
100m
10ms
1ms
100µs
Single Pulse. T
C
-I
Max Power Dissipation (W)
Collector Current (A)
10
=25°C
amb
See note (c)
10m
100m
1
-V
CE
10
Collector-Emitter Voltage (V)
3.0
See note (c)
2.5
2.0
See note (b)
1.5
1.0
See note (a)
0.5
0.0
0
20
Max Power Dissipation (W)
Thermal Resistance (°C/W)
30
D=0.5
20
Single Pulse
10
D=0.05
D=0.1
0
100µ
1m
10m
100m
1
10
100
1k
Pulse Width (s)
© Zetex Semiconductors plc 2008
100
120
140
160
Single Pulse. T
100
=25°C
amb
See note (c)
10
1
100µ
1m
10m
100m
1
10
100
1k
Pulse Width (s)
Transient Thermal Impedance
Issue 1- February 2008
80
Derating Curve
See note (c)
D=0.2
60
Temperature (°C)
Safe Operating Area
40
40
Pulse Power Dissipation
3
www.zetex.com
ZXTP19060CG
Electrical characteristics (at Tamb = 25°C unless otherwise stated)
Parameter
Collector-Base breakdown
voltage
Collector-Emitter
breakdown voltage
Emitter-Collector
breakdown voltage
(reverse blocking)
Emitter-Collector
breakdown voltage
(reverse blocking)
Emitter-Base breakdown
voltage
Collector-Base cut-off
current
Symbol
BVCBO
Min.
-60
Typ.
-110
Max.
Unit
V
Conditions
IC = -100µA
BVCEO
-260
-90
V
IC= -10mA (*)
BVECX
-7
-8.4
V
IE = -100µA, RBC < 1kΩ or
0.25V > VBC > -0.25V
BVECO
-7
-8.8
V
IE = -100µA
BVEBO
-7
-8.4
V
IE = -100µA
ICBO
<1
-50
-0.5
nA
µA
VCB = -60V
VCB = -60V, Tamb=100°C
Emitter cut-off current
IEBO
<1
-50
nA
VEB = -5.6V
Collector-Emitter
saturation voltage
VCE(sat)
-62
-145
-500
-105
-145
-300
-80
-205
-750
-165
-200
-500
mV
mV
mV
mV
mV
mV
IC = -1A, IB = -100mA(*)
IC = -1A, IB = -20mA(*)
IC = -2A, IB = -40mA(*)
IC = -2A, IB = -200mA(*)
IC = -3A, IB = -300mA(*)
IC = -5A, IB = -500mA(*)
Base-Emitter saturation
voltage
Base-Emitter turn-on
voltage
Static forward current
transfer ratio
VBE(sat)
-975
-1050
mV
IC = -5A, IB = -500mA(*)
VBE(on)
-890
-1000
mV
IC = -5A, VCE = -2V(*)
330
260
40
500
Transition frequency
fT
180
Input capacitance
Cibo
280
Output capacitance
Cobo
29.5
Delay time
td
24.3
ns
Rise time
tr
13.2
ns
Storage time
ts
456
ns
Fall time
tf
68.2
ns
hFE
200
160
20
IC = -100mA, VCE = -2V(*)
IC = -1A, VCE = -2V(*)
IC = -5A, VCE = -2V(*)
MHz
IC = -50mA, VCE = -10V
f = 50MHz
400
pF
VEB = -0.5V, f = 1MHz(*)
40
pF
VCB = -10V, f = 1MHz(*)
IC = -500mA, VCC = -10V,
IB1 = -IB2 = -50mA
NOTES:
(*) Measured under pulsed conditions. Pulse width ≤ 300µs; duty cycle ≤ 2%.
Issue 1- February 2008
© Zetex Semiconductors plc 2008
4
www.zetex.com
ZXTP19060CG
Typical characteristics
0.3
1
Tamb=25°C
I /I =10
C
B
I /I =100
B
I /I =50
CE(SAT)
- V
CE(SAT)
B
- V
C
100m
0.2
(V)
(V)
C
I /I =20
C
B
150°C
100°C
0.1
25°C
I /I =10
C
10m
B
-55°C
0.0
1m
10m
- I
100m
1
10
10m
100m
Collector Current (A)
C
V
CE(SAT)
- I
1
V
v I
CE(SAT)
C
10
Collector Current (A)
C
v I
C
1.2
100°C
600
500
1.2
400
1.0
25°C
300
0.8
0.6
-55°C
200
0.4
I /I =10
C
0.0
10m
- I
100m
1
0.8
0.6
150°C
0.4
10
1m
h
FE
10m
- I
Collector Current (A)
C
100°C
0.2
0
1m
25°C
-55°C
100
0.2
B
1.0
(V)
=2V
CE
BE(SAT)
V
- V
1.4
150°C
Typical Gain (hFE )
Normalised Gain
1.6
C
v I
100m
V
C
1
10
Collector Current (A)
BE(SAT)
v I
C
400
1.0
V
=2V
350
CE
f = 1MHz
Cibo
Capacitance (pF)
25°C
- V
BE(ON)
(V)
-55°C
0.8
0.6
150°C
0.4
100°C
250
200
150
100
Cobo
50
0
0.2
1m
300
10m
- I
100m
1
10m
10
C
V
BE(ON)
Issue 1- February 2008
© Zetex Semiconductors plc 2008
100m
1
10
- Voltage(V)
Collector Current (A)
Capacitance v Voltage
v I
C
5
www.zetex.com
ZXTP19060CG
Package outline - SOT223
Dim.
Millimeters
Inches
Dim.
Millimeters
Inches
Min.
Max.
Min.
Max.
Min.
Max.
Min.
Max.
A
-
1.80
-
0.071
D
6.30
6.70
0.248
0.264
A1
0.02
0.10
0.0008
0.004
e
2.30 BSC
0.0905 BSC
A2
1.55
1.65
0.0610
0.0649
e1
4.60 BSC
0.181 BSC
b
0.66
0.84
0.026
0.033
E
6.70
7.30
0.264
0.287
b2
2.90
3.10
0.114
0.122
E1
3.30
3.70
0.130
0.146
C
0.23
0.33
0.009
0.013
L
0.90
-
0.355
-
Note: Controlling dimensions are in millimeters. Approximate dimensions are provided in inches
Issue 1- February 2008
© Zetex Semiconductors plc 2008
6
www.zetex.com
ZXTP19060CG
Intentionally left blank
Issue 1- February 2008
© Zetex Semiconductors plc 2008
7
www.zetex.com
ZXTP19060CG
Definitions
Product change
Zetex Semiconductors reserves the right to alter, without notice, specifications, design, price or conditions of supply of any product or
service. Customers are solely responsible for obtaining the latest relevant information before placing orders.
Applications disclaimer
The circuits in this design/application note are offered as design ideas. It is the responsibility of the user to ensure that the circuit is fit for
the user’s application and meets with the user’s requirements. No representation or warranty is given and no liability whatsoever is
assumed by Zetex with respect to the accuracy or use of such information, or infringement of patents or other intellectual property rights
arising from such use or otherwise. Zetex does not assume any legal responsibility or will not be held legally liable (whether in contract,
tort (including negligence), breach of statutory duty, restriction or otherwise) for any damages, loss of profit, business, contract,
opportunity or consequential loss in the use of these circuit applications, under any circumstances.
Life support
Zetex products are specifically not authorized for use as critical components in life support devices or systems without the express written
approval of the Chief Executive Officer of Zetex Semiconductors plc. As used herein:
A. Life support devices or systems are devices or systems which:
1. are intended to implant into the body
or
2. support or sustain life and whose failure to perform when properly used in accordance with instructions for use provided in the
labeling can be reasonably expected to result in significant injury to the user.
B. A critical component is any component in a life support device or system whose failure to perform can be reasonably expected to
cause the failure of the life support device or to affect its safety or effectiveness.
Reproduction
The product specifications contained in this publication are issued to provide outline information only which (unless agreed by the
company in writing) may not be used, applied or reproduced for any purpose or form part of any order or contract or be regarded as a
representation relating to the products or services concerned.
Terms and Conditions
All products are sold subjects to Zetex’ terms and conditions of sale, and this disclaimer (save in the event of a conflict between the two
when the terms of the contract shall prevail) according to region, supplied at the time of order acknowledgement.
For the latest information on technology, delivery terms and conditions and prices, please contact your nearest Zetex sales office.
Quality of product
Zetex is an ISO 9001 and TS16949 certified semiconductor manufacturer.
To ensure quality of service and products we strongly advise the purchase of parts directly from Zetex Semiconductors or one of our
regionally authorized distributors. For a complete listing of authorized distributors please visit: www.zetex.com/salesnetwork
Zetex Semiconductors does not warrant or accept any liability whatsoever in respect of any parts purchased through unauthorized sales channels.
ESD (Electrostatic discharge)
Semiconductor devices are susceptible to damage by ESD. Suitable precautions should be taken when handling and transporting devices.
The possible damage to devices depends on the circumstances of the handling and transporting, and the nature of the device. The extent
of damage can vary from immediate functional or parametric malfunction to degradation of function or performance in use over time.
Devices suspected of being affected should be replaced.
Green compliance
Zetex Semiconductors is committed to environmental excellence in all aspects of its operations which includes meeting or exceeding regulatory requirements with respect to the use of hazardous substances. Numerous successful programs have been implemented to reduce
the use of hazardous substances and/or emissions.
All Zetex components are compliant with the RoHS directive, and through this it is supporting its customers in their compliance with
WEEE and ELV directives.
Product status key:
“Preview”
Future device intended for production at some point. Samples may be available
“Active”
Product status recommended for new designs
“Last time buy (LTB)”
Device will be discontinued and last time buy period and delivery is in effect
“Not recommended for new designs” Device is still in production to support existing designs and production
“Obsolete”
Production has been discontinued
Datasheet status key:
“Draft version”
This term denotes a very early datasheet version and contains highly provisional information, which
may change in any manner without notice.
“Provisional version”
This term denotes a pre-release datasheet. It provides a clear indication of anticipated performance.
However, changes to the test conditions and specifications may occur, at any time and without notice.
“Issue”
This term denotes an issued datasheet containing finalized specifications. However, changes to
specifications may occur, at any time and without notice.
Zetex sales offices
Europe
Americas
Asia Pacific
Corporate Headquarters
Zetex GmbH
Kustermann-park
Balanstraße 59
D-81541 München
Germany
Telefon: (49) 89 45 49 49 0
Fax: (49) 89 45 49 49 49
[email protected]
Zetex Inc
700 Veterans Memorial Highway
Hauppauge, NY 11788
USA
Zetex (Asia Ltd)
3701-04 Metroplaza Tower 1
Hing Fong Road, Kwai Fong
Hong Kong
Zetex Semiconductors plc
Zetex Technology Park, Chadderton
Oldham, OL9 9LL
United Kingdom
Telephone: (1) 631 360 2222
Fax: (1) 631 360 8222
[email protected]
Telephone: (852) 26100 611
Fax: (852) 24250 494
[email protected]
Telephone: (44) 161 622 4444
Fax: (44) 161 622 4446
[email protected]
© 2008 Published by Zetex Semiconductors plc
Issue 1- February 2008
© Zetex Semiconductors plc 2008
8
www.zetex.com