8 7 REVISIONS 0.5-1.0 FLK CuNi12ZN24 927775-6 M CuSn4 1 927775-3 M 927775-1 M CuSn4 1-927768-1 R CuFe2 927768-9 P 927768-6 P 927768-3 P 927768-1 P 1719810-1 10 2-927771-2 A N 2-927771-1 N 1-927771-1 N 927771-9 M 927771-8 N 927771-6 M 927771-3 M 927771-1 M CuFe2 2-927774-1 C CuSn4 1-927774-1 C CuFe2 927774-6 B 927774-3 B 927774-1 B 963708-1 969137-1 12 1-927778-1 B 11 SINGLE WIRE SEAL/ Einzeldichtungssystem 1 927778-1 C A 1 CuFe2 PRETINNED vorverzinnt min. 1µm CuSn4 CuSn4 CuFe2 2 3 3 CuFe2 4 CuSn4 CuSn4 1-927766-1 E CuFe2 927766-3 D 927766-1 D CuFe2 2-929937-1 E CuSn4 1-929937-1 E CuFe2 929937-6 E 929937-3 E 929937-1 E CuFe2 2-929939-1 E CuSn4 1-929939-1 E CuFe2 929939-6 E 929939-3 E 929939-1 E CuFe2 2-927770-1 G CuSn4 1-927770-1 G CuFe2 927770-6 F 927770-3 F 927770-1 F CuFe2 2-929941-1 E CuSn4 1-929941-1 E CuFe2 929941-6 D 929941-3 D 929941-1 D D 927772-3 C 927772-1 C TE ORDER NO. STRIP FORM Bandware REV. 5 5 5 6 CuSn4 CuSn4 CuSn4 CuSn4 CuSn4 CuFe2 CuFe2 6 CuSn4 CuFe2 DESIGN Ausfuehrung 4 3 5 MATERIAL Werkstoff Add PN´s in the Table 25NOV2014 Ho. Eder 0.05 GilchEder 3 4 5.5 18.8 0.4 E = 2.6 G = 2.8 D = 1.1 Dr E = 3.6 G = 3.8 D = 1.8 Dr E = 3.6 G = 3.8 D = 1.8 Dr H = 3.6 K = 3.9 D = 1.8 H = 4.7 K = 4.9 D = 2.6 E = 3.6 G = 3.8 D = 1.8 Dr E H = 3.9 K = 4.1 D = 2.4 5.8 18.8 0.4 D 8 7 3.6 4.9 3.0 4.0 5.5 18.8 0.4 3.3 4.3 5.8 18.8 0.4 H = 5.5 K = 5.8 D = 3.6 3.3 4.3 5.8 18.8 0.4 H = 4.7 K = 4.9 D = 2.6 3.3 4.3 5.8 18.8 0.4 4.5 0.2 DESIGN 6 Ausfuehrung 6 DESIGN 2 Ausfuehrung 2 >1.0-2.5 FLR 2.1-3.1 C DESIGN 3 Ausfuehrung 3 0.5-1.0 FLR 1.4-2.3 E = 2.6 G = 2.8 D = 1.1 Dr H = 3.6 K = 3.9 D = 1.8 3 4 5.5 18.8 0.4 NOTES Bemerkungen 1 PRETINNED vorverzinnt min. 1µm 2 1 0.2-0.5 FLR PRETINNED vorverzinnt min. 1µm 0.08-0.2 Sonderleitung PRETINNED vorverzinnt min. 1µm 2 E 5 3 CuFe2 CuFe2 E = 2.6 G = 2.8 D = 1.1 Dr 4.3 2 CuSn4 CuSn4 0.4 3.3 6 PRETINNED vorverzinnt min.0.8µm 2-927766-1 1-927772-1 3 CuFe2 2 4 CuSn4 1 26MAY2014 2 3 CuSn4 D C 13 4806 (3/13) A 927778-3 2112132-1 A B 1 2.7-4.1 Material of PN 928810-1 corrected PRETINNED vorverzinnt min.0.8µm PLAIN BLANK 2 PRETINNED vorverzinnt min. 1µm 0.2-0.5 FLR 0.2-0.5 FLK 0.2-0.5 FLR >1.0-2.5 FLK E = 2.1 G = 2.1 D = 0.8 Dr H = 2.7 K = 2.8 D = 1.4 2.5 3.5 5.6 18.8 0.4 E = 1.7 G = 1.7 D = 0.6 Dr E = 2.1 G = 2.1 D = 0.8 Dr H = 3.1 K = 3.2 D = 1.6 2.5 3.7 5.9 18.8 0.4 H = 3.5 K = 3.6 D = 2 2.5 3.5 5 18.8 0.4 1.2-2.3 E = 2.1 G = 2.1 D = 0.8 Dr H = 3.5 K = 3.6 D = 2.0 2.5 3.5 5 18.8 0.4 1.15-1.6 E = 2.4 G = 2.3 = 1 D Dr H = 2.9 K = 2.9 D = 1.4 2.5 3.5 5.6 18.8 0.2 2.7-3.0 E = 3.6 G = 3.8 D = 1.8 Dr H = 5.4 K = 4.6 D = 3.2 3.5 5.9 7.5 18.8 0.4 1.0-1.6 1.5-1.8 1.2-2.3 2 1 PRETINNED vorverzinnt min. 1µm >1.0-2.5 FLR 2.7-3.0 2 1 PRETINNED vorverzinnt min. 1µm 0.5-1.0 FLR 1.4-2.1 2 1 PRETINNED vorverzinnt min. 1µm 0.5-1.0 FLR 1.4-2.1 PRETINNED vorverzinnt min. 1µm 2 PRETINNED vorverzinnt min. 1µm SURFACE Oberflaeche E = 2.6 G = 2.8 D = 1.1 Dr E = 2.6 G = 2.8 D = 1.1 Dr H = 5.4 K = 4.6 D = 3.2 H = 5.4 K = 4.6 D = 3.2 H = 5.4 K = 4.6 D = 3.2 3.5 3 3 5.9 5.4 5.4 7.5 7 7 21 21 18.8 0.2-0.5 FLR 0.2-0.5 FLR WIRE RANGE Drahtgroessen Bereich [mm²] 1.15-1.6 1.15-1.6 INSULATION Isolations [mm] E = 2.1 G = 2.1 D = 0.8 Dr E = 2.1 G = 2.1 D = 0.8 Dr H = 5.4 K = 4.6 D = 3.2 H = 5.4 K = 4.6 D = 3.2 STRIP FORM WIRE CRIMP INSUL.-CRIMP Drahtcrimp Iso.-Crimp Bandware CRIMP DIMENSION (mm) Crimpabmessungen (mm) 2.5 4.9 6.5 21 4.9 6.5 18.8 2 CONTACT ZONE GOLD PLATED MIN. 0.8µm OVER MIN. 1.3µm NICKEL-LAYER Kontaktzone vergoldet min. 0,8µm ueber min. 1,3µm Nickel-Zwischenschicht CRIMP AREA MIN.1µm TIN PLATED OVER NICKEL-LAYER Crimpbereich min. 1µm verzinnt ueber Nickel-Zwischenschicht 3 CANTILEVER SPRING INSIDE AND OUTSIDE 0.4-1.2µm GOLD PLATED Ueberfeder innen und aussen 0,4-1,2µm vergoldet 4 CONTACT BODY, CONTACT SPRING INSIDE AND CRIMP AREA MIN. 1µm TIN PLATED OVER NICKEL-LAYER, TOUCHING AREA TO CANTILEVER SPRING AND CONTACT SPRING OUTSIDE SELECTIVE 0.8µm GOLD OVER MIN. 1.3µm NICKEL-LAYER Kontaktkoerper, Kontaktfeder innen und Crimpbereich min. 1.3µm verzinnt ueber Nickel-Zwischenschicht, Anlageflaeche zur Ueberfeder Kontaktfeder und aussen selektiv 0,8µm vergoldet ueber min. 1µm Nickel-Zwischenschicht 5 CONTACT ZONE AND TOUCHING AREA TO CANTILEVER SPRING MIN. 0.8µm SELECTIVE GOLD PLATED OVER 1.3µm NICKEL PLATED, CRIMP AREA MIN. 1µm TIN PLATED OVER NICKEL-LAYER Kontaktzone und Anlageflaeche zur Ueberfeder min. 0,8µm vergoldet ueber min. 1,3µm Nickel-Zwischenschicht Crimpbereich min. 1µm verzinntNickel-Zwischenschicht ueber 6 CONTACT BODY AND CRIMP AREA MIN. 1µm TIN PLATED OVER NICKEL-LAYER, TOUCHING AREA TO CANTILEVER SPRING SELECTIVE 0.8µm GOLD OVER MIN. 1.3µmNICKEL-LAYER Kontaktkoerper und Crimpbereich min. 1µm verzinnt ueber Nickel-Zwischenschicht Anlageflaeche zur Ueberfeder selektiv 0,8µm vergoldet ueber min.Nickel-Zwischenschicht 1,3µm 7 CONTACT OFF OPTIONAL Abschnitt \Freischnitt optional 8 SAWAG ONLY FOR PN 929937,929939, 929941 Swage nur fuer PN 929937, 929939, 929941 9 VARIANTS WITH GAP-SIZE 0.3mm (±0.1) Varianten mit Gap-Size 0.3mm (±0.1) 10 CONTACTS DIPPED IN OR SPRAYED WITH LUBRICANT BARRIERTA Kontakte getaucht oder besprueht mit Lubricant Barrierta 0.6 0.6 0.9 828904-1 1.2-2.1 828905-1 2.2-3.0 ORDER No. INSULATION Bestell-Nr. Isolations n n 828905 blue blau white weiss COLOUR Farbe 0.8 4.3 0.3 7.8 2.5 CONTACT BODY PRE-SILVER PLATED MIN. 0.8µm Kontaktkoerper vorversilbert min. 0,8µm CONTACT ZONE SELECTIVE PRE-SILVER PLATED MIN. 3µm Kontaktzone selektiv vorversilbert min. 3µm 0.4 SINGLE WIRE SEAL 11 Einzel-Dichtung 2 1 E = 3.6 G = 3.8 D = 1.8 Dr DESIGN 4 Ausfuehrung 4 1 5:1 828904 0.3 0.3 11 ACCORDING INSULATION DIA IS TO CHOOSE THE SINGLE WIRE SEAL Entsprechend dem Isolationsdurchmesser ist die Einzel-Dichtung auszuwaehlen 12 VARIANTS WITH GAP-SIZE 0.65mm (-0.1) Varianten mit Gap-Size 0.65mm (-0.1) 13 VARIANTS WITH GAP-SIZE 0.15mm (-0.05) Varianten mit Gap-Size 0.15mm (-0.05) 0.8 4.3 0.3 7.8 0.3 0.3 B C D E A 09JUN99 K. Gerlach CHK 09JUN99 J. Has APVD - NAME PRODUCT DWN 0.9 THIS DRAWING IS A CONTROLLED DOCUMENT. DIMENSIONS: A B 0.1 R >1.0-2.5 FLK 2.1-3.1 Ho. Eder 0.3 2-927768-1 CuFe2 >1.0-2.5 FLR 1.4-2.3 25APR2014 0.65-0.1 N PRETINNED vorverzinnt min. 1µm 0.5-1.0 FLR New Creo drawing created 0.15-0.05 927773-1 1 CuSn4 2.0-2.7 Ho. Eder 0.5 max. 0.3 N 18.8 0.4 5.6 927773-3 5.5 18.8 0.3 CuSn4 PRETINNED vorverzinnt min. 1µm 4 5.5 3.4 1 CuFe2 3 4 0.3 1 0.5-1.0 FLK PRETINNED vorverzinnt min. 0.8µm PRETINNED vorverzinnt min. 1µm H = 3.9 K = 4.1 D = 2.4 H = 4.7 K = 4.9 D = 2.6 3 5.6 A CuFe2 PRETINNED vorverzinnt min. 0.8µm H = 3.6 K = 3.9 D = 1.8 0.3 A CuSn4 2.0-2.7 E = 2.6 G = 2.8 D = 1.1 Dr E = 3.6 G = 3.8 D = 1.8 Dr E = 2.6 G = 2.8 D = 1.1 Dr 3.4 9 1 2.1-3.1 13NOV13 0.6+0.2 PLAIN BLANK M 9 UNSEALED/ ungedichtet CuSn4 927775-7 963884-1 C 1 CuSn4 PRETINNED vorverzinnt min.0.8µm 928810-1 A15 A 1 >1.0-2.5 FLR APVD D # 0.2 Dr 3.1+0.05 -0.20 928876-1 A PRETINNED vorverzinnt min.0.8µm 1.4-2.3 A16 Part status changed DWN 03 12 CuSn4 A B A15 DATE 0. 965899-1 1 0.5-1.0 FLR 5 A14 DESCRIPTION 2 0. 12 A PRETINNED vorverzinnt min.0.8µm 7 A13 DESIGN 5 Ausfuehrung 5 C LTR 0.32 G # 0.3 965901-1 X10CrNi18-8 K # 0.3 E # 0.3 D D # 0.5 SECTION D-D Schnitt H # 0.3 SECTION C-C Schnitt D P DESIGN 1 Ausfuehrung 1 2.8-0.3 Tyco Electronics AMP GmbH 4.15-0.2 COPYRIGHT2014 1 2 3 2014 ALL RIGHTS RESERVED. SEE APPLICATION - SPECIFICATION siehe Verarbeitungsspezifikation 114-18050 C RELEASED FOR PUBLICATION 4 5 2.2-0.3 THIS DRAWING IS UNPUBLISHED. 6 CRIMP DATA AND CRIMP TOOL Crimpdaten u. Crimpwerkzeuge mm MATERIAL SEE TABLE - TOLERANCES UNLESS OTHERWISE SPECIFIED: 0 PLC 1 PLC 2 PLC 3 PLC 4 PLC ANGLES FINISH - PRODUCT SPEC 108-18013 APPLICATION SPEC 1 $ SEE TABLE - 114-18050 WEIGHT Customer Drawing TE Connectivity GROUP DRAWING FOR JUNIOR POWER TIMER CONTACT Produkt-Gruppen-Zeichnung fuer JPT SIZE CAGE CODE DRAWING NO A0 00779 RESTRICTED TO 1355046 SCALE 5:1 SHEET - 1 OF 1 REV A16