DCDW10 SERIES 10 Watts Medical Through Hole DC/DC Converter Single and Dual Output Rev A FEATURES • • • • • • • • • 4:1 Wide Input Voltage Range Through Hole Package High Efficiency 100% Burned In UL94V-0 Package Material Short Circuit Protection RoHS Compliant Customized Solutions Available For Medical/Industrial/ITE Applications DESCRIPTION The DCDW10 series of DC/DC converters offers up to 10 watts of output power in a very compact 1.24” x 0.79” x 0.40” through hole package. This series consists of both single and dual output models with wide 4:1 input voltage range. The DCDW10 series features high efficiency, short circuit protection, and UL94V-0 package material. This series is for medical, industrial, or ITE applications, is RoHS compliant, and has been 100% burned-in. Please contact factory for ordering information. Size: 1.24in x 0.79in x 0.40in (31.6mm x 20.1mm x 10.2mm) MODEL SELECTION TABLE Single Output Models Model Number DCDW10-24S33 DCDW10-24S05 DCDW10-24S12 DCDW10-24S15 DCDW10-48S33 DCDW10-48S05 DCDW10-48S12 DCDW10-48S15 Input Voltage Range 24VDC (9~36VDC) 48VDC (18~75VDC) Output Voltage Output Current 3.3VDC 5VDC 12VDC 15VDC 3.3VDC 5VDC 12VDC 15VDC 3000mA 2000mA 833mA 670mA 3000mA 2000mA 833mA 670mA Input Current No Load 50mA 50mA 30mA 30mA 30mA 30mA 20mA 20mA Full Load 503mA 508mA 502mA 505mA 252mA 254mA 251mA 252mA Efficiency Output Power 82% 82% 83% 83% 82% 82% 83% 83% 10W 10W 10W 10W 10W 10W 10W 10W Efficiency Output Power 83% 83% 83% 83% 83% 83% 10W 10W 10W 10W 10W 10W MODEL SELECTION TABLE Dual Output Models Model Number DCDW10-24D05 DCDW10-24D12 DCDW10-24D15 DCDW10-48D05 DCDW10-48D12 DCDW10-48D15 7/25/2017 Input Voltage Range 24VDC (9~36VDC) 48VDC (18~75VDC) Output Voltage Output Current ±5VDC ±12VDC ±15VDC ±5VDC ±12VDC ±15VDC ±1000mA ±420mA ±340mA ±1000mA ±420mA ±340mA Input Current No Load 30mA 30mA 30mA 20mA 20mA 20mA Full Load 502mA 506mA 512mA 251mA 253mA 256mA Wall Industries, Inc. • 37 Industrial Drive, Exeter, NH 03833 • Tel: 603-778-2300 • Toll Free: 888-597-9255 • Fax 603-778-9797 website: www.wallindustries.com • e-mail: [email protected] Page 1 of 4 Rev A DCDW10 SERIES 10 Watts Medical Through Hole DC/DC Converter Single and Dual Output SPECIFICATIONS All specifications are based on 25°C, Nominal Input Voltage, and Rated Output Current unless otherwise noted. We reserve the right to change specifications based on technological advances. SPECIFICATION TEST CONDITIONS Min Typ Max Unit INPUT SPECIFICATIONS 24V Nominal 48V Nominal Input Voltage Range Input Current Input Filter OUTPUT SPECIFICATIONS Output Voltage Voltage Tolerance Line Regulation 9 18 24 36 48 75 See Table Pi Network See Table ±2 ±0.5 ±0.5 ±0.5 See Table See Table 100 1% Vout 350 ±5 Full Load @Vin. (Nom) Single Dual (Balanced Load) Load Regulation Output Power Output Current Ripple & Noise (20MHz bandwidth) Transient Response Setting Time Cross Regulation PROTECTION Short Circuit Protection ENVIRONMENTAL SPECIFICATIONS Operating Temperature Storage Temperature Humidity Cooling MTBF GENERAL SPECIFICATIONS Efficiency Switching Frequency Isolation Voltage Isolation Resistance PHYSICAL SPECIFICATIONS Weight 3-15V Models, BW=DC to 20MHz >15V Models, BW=DC to 20MHz 25% Load Step Change Dual (25% to 100% Load) Hiccup With Derating % % % mVp-p us % Automatic Recovery -40 -55 100 125 95 Free Air Convection Non-Condensing MIL-HDBK-217F @25ºC VDC 900,000 ºC ºC % Hours See Table 400 3000 500VDC Dimensions (L x W x H) Case Material *Due to advances in technology, specifications subject to change without notice. KHz VAC MΩ 1000 0.55oz (15.5g) 1.24in x 0.79in x 0.40in (31.6mm x 20.1mm x 10.2mm) Plastic DERATING CURVES 7/25/2017 Wall Industries, Inc. • 37 Industrial Drive, Exeter, NH 03833 • Tel: 603-778-2300 • Toll Free: 888-597-9255 • Fax 603-778-9797 website: www.wallindustries.com • e-mail: [email protected] Page 2 of 4 DCDW10 SERIES 10 Watts Medical Through Hole DC/DC Converter Single and Dual Output Rev A RECOMMENDED TEST CIRCUIT MECHANICAL DRAWINGS PIN 1 11 12 13 15 23 24 Pin Assignment SINGLE +Vin NO PIN -Vout +Vout NO PIN -Vout +Vin DUAL Remote On/Off -Vin Common -Vout +Vout Common +Vin Unit: mm, Tolerance: XX.X ±0.5, XX.XX±0.25 7/25/2017 Wall Industries, Inc. • 37 Industrial Drive, Exeter, NH 03833 • Tel: 603-778-2300 • Toll Free: 888-597-9255 • Fax 603-778-9797 website: www.wallindustries.com • e-mail: [email protected] Page 3 of 4 Rev A DCDW10 SERIES 10 Watts Medical Through Hole DC/DC Converter Single and Dual Output COMPANY INFORMATION Wall Industries, Inc. has created custom and modified units for over 50 years. Our in-house research and development engineers will provide a solution that exceeds your performance requirements on-time and on budget. Our ISO9001-2008 certification is just one example of our commitment to producing a high quality, well-documented product for our customers. Our past projects demonstrate our commitment to you, our customer. Wall Industries, Inc. has a reputation for working closely with its customers to ensure each solution meets or exceeds form, fit and function requirements. We will continue to provide ongoing support for your project above and beyond the design and production phases. Give us a call today to discuss your future projects. Contact Wall Industries for further information: Phone: Toll Free: Fax: E-mail: Web: Address: (603)778-2300 (888)597-9255 (603)778-9797 [email protected] www.wallindustries.com 37 Industrial Drive Exeter, NH 03833 7/25/2017 Wall Industries, Inc. • 37 Industrial Drive, Exeter, NH 03833 • Tel: 603-778-2300 • Toll Free: 888-597-9255 • Fax 603-778-9797 website: www.wallindustries.com • e-mail: [email protected] Page 4 of 4