R F C o m p o n e n t s October 2015 Circulator SMD CU1S1055 Series RF Components Circulator Product compatible with RoHS directive SMD Overview of CU1S1055 Series PART NUMBER CONSTRUCTION CU1S1055 □ Series name Direction A B CW CCW C - Center Frequency (MHz) △△ Control Number cut off after the decimal point DIRECTION OF CIRCULATION ClockWise(CW): A Port 1 - ○○○○ CounterClockWise(CCW): B Port 1 Port 2 Port 2 Port 3 Port 3 TEMPERATURE RANGE Operating temperature （°C） –35 to +85 Storage temperature （°C） –40 to +85 RoHS Directive Compliant Product: See the following for more details related to RoHS Directive compliant products. http://product.tdk.com/en/environment/rohs/ • All specifications are subject to change without notice. • Before using these products, be sure to request the delivery specifications. 20151001 / rf_circulator_cu1s1055_en.fm RF Components CU1S1055 Series SHAPES AND DIMENSIONS 120° 3-ø1.0 [Top view] ø10.0 ø12.5 7.0max. Tolerance unless otherwise specified: ±0.3 0±0.1 3PL Contact Pin Coplanarity Dimensions in mm RECOMMENDED LAND PATTERN RECOMMENDED PC BOARD PATTERN 14.4 12.8 10.8 10.8 3-R1.1 3-R1.9 20° 3.2 R1.6 50Ω Line 20° 2.2 1.0 3.1 6.25 R4.0 6.25 7.25 3.1 R2.2 R5 .1 3.2 2.2 Dimensions in mm Dimensions in mm • All specifications are subject to change without notice. • Before using these products, be sure to request the delivery specifications. 20151001 / rf_circulator_cu1s1055_en.fm RF Components CU1S1055 Series ELECTRICAL CHARACTERISTICS Frequency range Center frequency Isolation Insertion loss V.S.W.R. Zo=50: Handling power IMD 10Wx2tone (MHz) (MHz) (dB) min. 20 20 20 20 20 20 20 (dB) max. 0.30 0.30 0.30 0.30 0.35 0.30 0.35 max. 1.15 1.22 1.22 1.22 1.22 1.15 1.22 (W) max. 50 50 50 50 50 50 50 (dBc) max. –60 –60 –60 –60 –60 –60 –60 2010 to 2025 2110 to 2170 2300 to 2400 2350 to 2360 2496 to 2690 2570 to 2620 2620 to 2690 2017.5 2140 2350 2355 2593 2595 2655 Part Number ClockWise CU1S1055AC-2017-00 CU1S1055AC-2140-00 CU1S1055AC-2350-00 CU1S1055AC-2355-00 CU1S1055AC-2593-00 CU1S1055AC-2595-00 CU1S1055AC-2655-00 CounterClockWise CU1S1055BC-2017-00 CU1S1055BC-2140-00 CU1S1055BC-2350-00 CU1S1055BC-2355-00 CU1S1055BC-2593-00 CU1S1055BC-2595-00 CU1S1055BC-2655-00 Characteristic Impedance (:) : 50(Nominal) • All specifications are subject to change without notice. • Before using these products, be sure to request the delivery specifications. 20151001 / rf_circulator_cu1s1055_en.fm RF Components CU1S1055 Series PACKAGING STYLE REEL DIMENSIONS 330 Dimensions in mm TAPE DIMENSIONS Pulling side 24.0±0.1 2.0±0.1 4.0±0.1 7.0 15.88 1.5+0.1 –0 0.5±0.05 13.46 13±0.1 28.4±0.1 32.0±0.3 1.75±0.1 Reel side 7.8±0.1 Dimensions in mm Tolerance: ±0.2 PACKAGE QUANTITY Standard package quantity (pieces/reel) 200 • All specifications are subject to change without notice. • Before using these products, be sure to request the delivery specifications. 20151001 / rf_circulator_cu1s1055_en.fm RF Components CU1S1055 Series RECOMMENDED REFLOW PROFILE Soaking Working Soldering Peak T: Temperature T4 T5 T3 T2 T4 T3 t3 T1 t1 t2 t: Time Soaking Temp. T1 150°C T2 180°C Time t1 60 to 120s Working Temp. T3 230°C Time t2 30 to 60s Soldering Peak Temp. Time T4 t3 250°C within 10s Temp. T5 260°C max. • All specifications are subject to change without notice. • Before using these products, be sure to request the delivery specifications. 20151001 / rf_circulator_cu1s1055_en.fm RF Components REMINDERS FOR USING THESE PRODUCTS Before using these products, be sure to request the delivery specifications. SAFETY REMINDERS Please pay sufficient attention to the warnings for safe designing when using these products. REMINDERS Please do not bring the magnet close to the product (Recommending is separating to 50cm or more). An electric characteristic might be deteriorated. The magnetic field of 5mT or more must not go into the product when you make the magnet approach. Moreover, please do not touch a soft magnetic material such as iron (Recommending is separating to 10mm or more). An electric characteristic might be deteriorated. An electric characteristic changes when bringing it close within 10mm(reversible change). There is a leakage of some magnetism (0.3T or less) from the product. The products listed on this catalog are intended for use in general electronic equipment (AV equipment, telecommunications equipment, home appliances, amusement equipment, computer equipment, personal equipment, office equipment, measurement equipment, industrial robots) under a normal operation and use condition. The products are not designed or warranted to meet the requirements of the applications listed below, whose performance and/or quality require a more stringent level of safety or reliability, or whose failure, malfunction or trouble could cause serious damage to society, person or property. Please understand that we are not responsible for any damage or liability caused by use of the products in any of the applications below or for any other use exceeding the range or conditions set forth in this catalog. (1) Aerospace/Aviation equipment (2) Transportation equipment (cars, electric trains, ships, etc.) (3) Medical equipment (4) Power-generation control equipment (5) Atomic energy-related equipment (6) Seabed equipment (7) Transportation control equipment (8) Public information-processing equipment (9) Military equipment (10) Electric heating apparatus, burning equipment (11) Disaster prevention/crime prevention equipment (12) Safety equipment (13) Other applications that are not considered general-purpose applications When using this product in general-purpose applications, you are kindly requested to take into consideration securing protection circuit/ equipment or providing backup circuits, etc., to ensure higher safety. • All specifications are subject to change without notice. • Before using these products, be sure to request the delivery specifications. 20151001 / rf_circulator_cu1s1055_en.fm