65A 10.16mm pitch Wire-to-Board Connectors for Internal Power Supply DF60 Series (UL, C-UL, TÜV certified product) Jc^fjZadX`^c\bZX]Vc^hb^h XdciV^cZY^ch^YZi]Z]ZVYZg HdX`ZiVcY]ZVYZg YZh^\cVkd^Yh h]dgi"X^gXj^iWZilZZc VY_VXZciXdciVXih# Jan.1.2017 Copyright 2017 HIROSE ELECTRIC CO., LTD. All Rights Reserved. <j^YZ`ZnhegZkZci ^cXdggZXi^chZgi^dc BdaYZYe^ch\^kZV iZbedgVgn]daYVcY VhhjgZegdeZgdg^ZciVi^dc d[i]ZXdccZXidg# ■Features ● Lock structure 1. High current capacity Capable of going to a max. of 65A when using 8 AWG with the single position connector. (Please refer to the chart for the rated current in other pin counts.) Fig.1 ［6"6］ 8g^beXdciVXi 6 6 AdX`eVgihd[ i]Zeaj\VcY ]ZVYZghiVgi idZc\V\Z# 2. Secure lock mechanism ensures complete mating A secure lock mechanism with a clear tactile and audible click prevents insufficient mating. (Fig.2) CdXdciVXinZi# 3. Highly reliable 5-point contact structure Three independent contact springs provide a secure contact with high contact reliability using 5-point of contact. (Fig.3) =ZVYZgXdciVXi Fig.2 4. Molded lance design The lance is actually part of the housing instead of being part of the terminal. This prevents tangled wires during assembly. 5. Mis-insertion prevention for headers The addition of a molded pin on the header allows temporar y mounting retention and prevents reverse mounting on the PCB. (Fig.1). (Right angle pin header has a metal fitting for this purpose) 6. Prevention of solder cracks Three independent spring contacts provide a secure contact and a high contact reliability with 5-points of contact. Glass-reinforced resin is used on pin header to prevent solder cracks due to thermal contraction. Fig.3 7. Design Prevents short-circuits between contacts The wall structure between contacts isolates the contacts and prevents short circuits from occuring. (Fig.1) 8. Compliant to UL, C-UL and TÜV specifications 9. Glow Wire compliance(Compliant with IEC 60695-2-11) 2017.1e 1 DF60 Series●65A 10.16mm pitch Wire-to-Board Connectors for Internal Power Supply(UL, C-UL, TÜV certified product) ■Product Specifications Current Rating (Note 1) Ratings 8 AWG 10 AWG 12 AWG 1 50A 40A 31A Operating Humidity Range 20~80% 45A 35A 28A Storage Temperature Range -10~60ç (Note 3) Storage Humidity Range 40~70％ 42A 33A 27A 2 3 4 5 6 Voltage Rating Jan.1.2017 Copyright 2017 HIROSE ELECTRIC CO., LTD. All Rights Reserved. AC/DC 1,000V Current Rating See below table Voltage Rating AC/DC 600V C-UL See upper table (Δt=30ç) AC/DC 600V TÜV See upper table AC/DC 600V UL Current rating of UL Standards (Ambient temperature : 25ç) (Note 1) Item 1.Insulation resistance 2. Withstand voltage 3.Contact resistance 4.Vibration Resistance 5.Shock Resistance 6.Moistureresistance 7.Temperature cycles Operating Temperature -55~105ç (Note 2) No. of Contacts No. of Contacts 1 2 3 4 8 AWG 10 AWG 65A 55A 5 6 12 AWG 45A 40A 50A 55A UL/TÜV file No. and certification No. UL ：E52653 C-UL ：E52653 TÜV ：R50244085 45A 35A Specifications Conditions No less than 1,000Mø Measured at DC=1,000V No flashover or breakdown AC 3,000V applied for 1 minute. No more than 2mø Measured at 1A and not greater than 6V 2 No electrical discontinuity of 1μs or greater No electrical discontinuity of 1μs or greater Contact resistance : no more than 2mø ; insulation resistance : no less than 1,000Mø Contact resistance : no more than 2mø ; insulation resistance : no less than 1,000Mø Frequency 10 - 500Hz, accelerated velocity 98 m/s , 2 hours for each of the three axis directions 2 Accelerated velocity : 490m/s , for11 ms, half-sine wave form in 3 directions, 3 times for each of the three directions Temperature : 40±2ç; humidity : 90 to 95%, left for 96 hours -55ç : 30 minutes → 85ç : 30 minutes 25 cycles 8.Durability Contact resistance No more than 2mø 30 mating/unmating cycles 9. Solder heat resistance There should be no melting of the resin part which will influence the performance. Flow : 260ç, 10sec Hand soldering : temperature of soldering iron at 350ç±10ç for 5 seconds Note 1 : This is the maximum current rating while all pins are powered or used as all power lines. If you split the current over multiple lines, please factor in your own safety margin. Note 2 : Includes the temperature rise of power lines. Note 3 : The storage condition refers to long-term storage of the product on the shelf before assembly. Please use the operating temperature for temporary storage such as pre-assembly and during shipping. ■Materials / Finish Component Header 2 Part Material Finish UL Specification Insulator PBT (glass-reinforced) Black or gray UL94V-0 Contact High conductivity copper alloy Gold plating − Metal fitting Brass Tin-plating Crimp socket In-line plug Insulator Insulator PBT (glass-reinforced) PBT (glass-reinforced) Black or gray Black − UL94V-0 UL94V-0 Crimp contact Contact High conductivity copper alloy Gold plating − DF60 Series●65A 10.16mm pitch Wire-to-Board Connectors for Internal Power Supply(UL, C-UL, TÜV certified product) ■Product Number Structure Refer to the chart below when determining the product specifications from the product number. Please select from the product numbers listed in this catalog when placing orders. ●Connector DF 60 R − * P − 10.16 DSA Jan.1.2017 Copyright 2017 HIROSE ELECTRIC CO., LTD. All Rights Reserved. ❶ ❷ ❸ ❹ ❶ Series Name ：DF ❷ Series No. ：60 ❺ ❻ ❼ ❺ Connector type P ：Pin header ❻ Pitch ❸ Guide key type Blank：Left side (Color : black) R：Right side (Color : gray) ：10.16mm ❼ Type of housing DSA：Straight pin header DS：Right angle pin header ❹ Number of contacts ：1, 2, 3, 4, 5, 6 ●Connector DF 60 R − * S − 10.16 C ❶ ❷ ❸ ❹ ❺ ❻ ❶ Series Name ：DF ❷ Series No. ❺ Connector type ： 60 S EP ❸ Guide key type Blank：Left side (Color : black) R：Right side (Color : gray) ：Socket ：In-line plug ❻ Pitch ：10.16mm ❼ Wiring type ❹ Number of contacts S EP ❼ C：Crimp socket ：1, 2, 3, 4, 5, 6 ：1, 2, 3, 4, 5 ●Contact DF 60 A − ❶ ❶ Type of connection Blank：Standard A ：Sequential ❷ Applicable wire size 8 8 SCFA ❷ ❸ ❸ Packaging styles SCFA ：Socket contact reel SCA ：Socket contact, loose PCFA ：In-line plug contact, reel PCA ：In-line plug contact, loose ：8 AWG 1012 ：10 to 12 AWG 3 DF60 Series●65A 10.16mm pitch Wire-to-Board Connectors for Internal Power Supply(UL, C-UL, TÜV certified product) ■Straight pin header 3 pos. 5 pos. Jan.1.2017 Copyright 2017 HIROSE ELECTRIC CO., LTD. All Rights Reserved. E87aVndji '¤%#%* GZXdbbZcYZYi]^X`cZhhd[E87/i2&#+¤%#&bb 9¤%#%* )" G& :¤%#%* ¤% *#-¤%#%* #%* * %#% #-¤ ¢& 8dccZXidgdjia^cZ '#*)¤%#%* E2&%#&+¤%#%* Ａ¤%#%* Ｂ¤%#) &'#'¤%#) E2&%#&+¤%#' &#)*¤%#' &#)*¤%#' Ａ¤%#( Ａ¤%#( E2&%#&+¤%#' Ａ 8VkCd# ' (#-¤%#' '(#&¤%#) '&#*¤%#( ( &¤%#' i2&¤%#& *#-¤%#( '#*)¤%#( ) * & ¢'¤%#' &¤%#' 8dciVXiCd# (#-¤%#' ( Ａ 8VkCd# '&#*¤%#( 8dciVXiCd# '#.*¤%#( &*#,¤%#) '(#&¤%#) Headers with 5 to 6 pos. Ｂ¤%#) '#.*¤%#( &*#,¤%#) &'#'¤%#) Headers with 1 to 4 pos. ' & ¢'¤%#' i2&¤%#& *#-¤%#( '#*)¤%#( Ｃ¤%#( Ｃ¤%#( gold plating, tray packaging Unit : mm Standard Type Part No. DF60-1P-10.16DSA(27) DF60-2P-10.16DSA(27) DF60-3P-10.16DSA(27) DF60-4P-10.16DSA(27) DF60-5P-10.16DSA(27) DF60-6P-10.16DSA(27) HRS No. No. of Contacts 680-3004-5 27 1 680-3005-8 27 2 680-3001-7 27 3 680-3006-0 27 4 680-3007-3 27 5 680-3008-6 27 6 A —— 10.16 20.32 30.48 40.64 50.8 B 15.2 22.36 32.52 42.68 52.84 63 C 9.55 19.71 29.87 40.03 50.19 60.35 D 12.2 22.36 32.52 42.68 52.84 63 E 7.78 17.94 28.1 38.26 48.42 58.58 Quantity per package Guide key Color 160 96 64 Left Black 48 HRS No. No. of Contacts 680-3005-8 45 2 680-3001-7 45 3 A 10.16 20.32 B 22.36 32.52 C 19.71 29.87 D 22.36 32.52 E 17.94 28.1 Quantity per package Guide key Color 96 Left Red 64 HRS No. No. of Contacts 680-3038-7 27 3 A 20.32 B 32.52 C 29.87 D 32.52 E 28.1 Quantity per package Guide key Color 64 Right Gray 32 Standard Type [Color : Red] Part No. DF60-2P-10.16DSA(45) DF60-3P-10.16DSA(45) R Type Part No. DF60R-3P-10.16DSA(27) Note : Please place orders in full lot quantities. 4 DF60 Series●65A 10.16mm pitch Wire-to-Board Connectors for Internal Power Supply(UL, C-UL, TÜV certified product) ■Right angle pin header 3 pos. 5 pos. '*¤%#( ' &,#'¤%#%* +"¢ '#*)¤%#%* E2&%#&+¤%#%* &##%* Ａ¤%#%* ¤% Headers with 1 to 4 pos. Headers with 5 to 6 pos. Ｂ¤%#) Ｂ¤%#) & * i2%#),¤%#& (#+¤%#* ) ' ( & &,#'¤%#) ' i2&¤%#& ( 8VkCd# &,#'¤%#) 8VkCd# &,#(*¤%#( Ａ i2&¤%#& i2%#),¤%#& (#+¤%#* '*¤%#( &,#(*¤%#( Ａ '*¤%#( Jan.1.2017 Copyright 2017 HIROSE ELECTRIC CO., LTD. All Rights Reserved. E87AVndji GZXdbbZcYZYi]^X`cZhhd[E87/i2&#+¤%#&bb Ｂ¤%#) '" ¢( 8dccZXidgdjia^cZ Ｃ¤%#%* ¤% #%* (#- +%#-%#( 8dciVXiCd# (#- +%#-%#( &¤%#' '#*)¤%#( E2&%#&+¤%#' &¤%#' '#*)¤%#( E2&%#&+¤%#' Ａ¤%#( Ｃ¤%#( Standard Type Part No. DF60-1P-10.16DS(27) DF60-2P-10.16DS(27) DF60-3P-10.16DS(27) DF60-4P-10.16DS(27) DF60-5P-10.16DS(27) DF60-6P-10.16DS(27) gold plating, tray packaging Ａ¤%#( Ｃ¤%#( Unit：mm Color No. of Contacts HRS No. 680-3015-1 27 1 680-3016-4 27 2 680-3017-7 27 3 680-3018-0 27 4 680-3019-2 27 5 680-3020-1 27 6 A —— 10.16 20.32 30.48 40.64 50.8 B 15.2 22.36 32.52 42.68 52.84 63 C 8.35 15.51 25.67 35.83 45.99 56.15 Quantity per package Guide key 120 72 48 Left 36 HRS No. No. of Contacts 680-3016-4 45 2 A 10.16 B 22.36 C 15.51 Quantity per package Guide key 72 Left Color Red HRS No. No. of Contacts 680-3043-7 27 2 680-3044-0 27 3 A 10.16 20.32 B 22.36 32.52 C 15.51 25.67 Quantity per package Guide key 72 Right 48 Color Black 24 Standard Type [Color : Red] Part No. DF60-2P-10.16DS(45) R Type Part No. DF60R-2P-10.16DS(27) DF60R-3P-10.16DS(27) Gray Note : Please place orders in full lot quantities. 5 DF60 Series●65A 10.16mm pitch Wire-to-Board Connectors for Internal Power Supply(UL, C-UL, TÜV certified product) ■Crimp socket Jan.1.2017 Copyright 2017 HIROSE ELECTRIC CO., LTD. All Rights Reserved. 3 pos. 5 pos. Sockets with 1 to 4 pos. Sockets with 5 to 6 pos. Ａ¤%#( E2&%#&+¤%#' Ａ¤%#( E2&%#&+¤%#' Ａ Ａ 86KCd# 86KCd# Ｂ¤%#) &-¤%#) Ｂ¤%#) ')#)¤%#( ')#)¤%#( &-¤%#) ( ' * & ) ( Contact No. ' & Contact No. 1 package = 100 pcs Standard Type Part No. DF60-1S-10.16C DF60-2S-10.16C DF60-3S-10.16C DF60-4S-10.16C DF60-5S-10.16C DF60-6S-10.16C HRS No. 680-3009-9 680-3010-8 680-3002-0 680-3011-0 680-3012-3 680-3013-6 Standard Type [Color : Red] Part No. HRS No. DF60-1S-10.16C(15) 680-3009-9 15 DF60-2S-10.16C(15) 680-3010-8 15 DF60-3S-10.16C(15) 680-3002-0 15 Unit : mm Color No. of Contacts 1 2 3 4 5 6 A —— 10.16 20.32 30.48 40.64 50.8 B 15.8 22.36 32.52 42.68 52.84 63 Guide key Left Black No. of Contacts 1 2 3 A —— 10.16 20.32 B 15.8 22.36 32.52 Guide key Color Left Red No. of Contacts 2 3 A 10.16 20.32 B 22.36 32.52 Guide key Color Right Gray R Type Part No. DF60R-2S-10.16C DF60R-3S-10.16C HRS No. 680-3031-8 680-3032-0 Note : Please place orders in full lot quantities. 6 DF60 Series●65A 10.16mm pitch Wire-to-Board Connectors for Internal Power Supply(UL, C-UL, TÜV certified product) ■ In-line plug 5 pos. The torque value for attaching screws is 49N Panel cutout Ｃ±0.2 (B+1)±0.3 13.5±0.3 .5M 8.45±0.3 13.4±0.3 Ø R0 .1 ±0 6 3. 17.9±0.3 AX In-line plugs with 1 to 4 pos. Inline plug with 5 pos. Ｄ±0.3 Ｃ±0.2 Ｂ±0.3 Ａ±0.3 Ｄ¤%#( Ｃ¤%#' Ｂ¤%#( Ａ¤%#( E2&%#&+¤%#' E2&%#&+¤%#' 6 15.9¤0.4 12.4¤0.3 CAV No. &*#.¤%#) &'#)¤%#( (-#+¤%#) (-#+¤%#) Jan.1.2017 Copyright 2017 HIROSE ELECTRIC CO., LTD. All Rights Reserved. 3 pos. 8dciVXiCd# 8dciVXiCd# ( ' * & ) ( ' Ｅ¤%#( Ｅ¤0.3 & 1 package = 100 pcs Unit : mm Standard Type Part No. DF60-1EP-10.16C DF60-2EP-10.16C DF60-3EP-10.16C DF60-4EP-10.16C DF60-5EP-10.16C HRS No. 680-3050-2 680-3025-5 680-3026-8 680-3027-0 680-3028-3 No. of Contacts 1 2 3 4 5 A —— —— 20.32 30.48 40.64 B 15.2 22.36 32.52 42.68 52.84 C 23.7 30.86 41.02 51.18 61.34 D 32.2 39.36 49.52 59.68 69.84 E 10.6 20.76 30.92 41.08 51.24 Guide key Color Left Black HRS No. No. of Contacts 680-3050-2 15 1 680-3025-5 15 2 680-3026-8 15 3 A —— —— 20.32 B 15.2 22.36 32.52 C 23.7 30.86 41.02 D 32.2 39.36 49.52 E 10.6 20.76 30.92 Guide key Color Left Red A —— 20.32 B 22.36 32.52 C 30.86 41.02 D 39.36 49.52 E 20.76 30.92 Guide key Color Right Gray Standard Type [Color : Red] Part No. DF60-1EP-10.16C(15) DF60-2EP-10.16C(15) DF60-3EP-10.16C(15) R Type Part No. DF60R-2EP-10.16C DF60R-3EP-10.16C HRS No. 680-3053-0 680-3054-0 No. of Contacts 2 3 Note : Please place orders in full lot quantities 7 DF60 Series●65A 10.16mm pitch Wire-to-Board Connectors for Internal Power Supply(UL, C-UL, TÜV certified product) ■Socket crimp contact )#%*¤%#( ,#,¤%#( 6eea^XVWaZl^gZ \Vj\ZbVg` ¢' i2%#*¤%#& HRS No. Jacket Diameter 4.9 to 7.8 7.54 UL ８ ８ '#&¤%#( '¤%#( ¤% #( &)#,¤%#( '%¤%#) '*#*¤%#) )¤%#( Jan.1.2017 Copyright 2017 HIROSE ELECTRIC CO., LTD. All Rights Reserved. ',¤%#( Part No. *¤%#( DF60-8SCFA DF60-8SCA 680-3003-2 680-3021-4 UL1283 DF60-1012SCFA 680-3014-9 UL1015 4 to 5.2 DF60-1012SCA 680-3022-7 UL1015 4.69 4.04 Strip length : 6.5 - 7.5mm Applicable wires Wire size Core structure Package style Reel 8 AWG 7/24/0.26 Loose 10 AWG 104/0.26 Reel 12 AWG 65/0.26 10 AWG 104/0.26 Loose 12 AWG 65/0.26 Quantity 700 100 900 100 Note : The applicable wires are tin-plated and annealed. Note : Please contact our Sales Department when using wires other than those listed. ■Crimp contact for in-line plugs 14.7±0.3 .3 ±0 Ø2 27±0.3 Part No. DF60A-8PCFA DF60-8PCFA(07) DF60-8PCA(07) HRS No. A B 680-3057-0 680-3023-0 07 680-3048-0 07 34.2 28.7 32.7 27.2 2.1±0.3 8 5±0.3 2±0.3 Applicable wire gauge mark B±0.4 4±0.3 A±0.4 7.4±0.3 6.2±0.3 t=0.5±0.1 UL UL1283 Jacket Diameter 4.9 to 7.8 Strip length : 6.5 - 7.5mm Applicable wires Wire size Core structure Package style Quantity 8 AWG 7/24/0.26 10 AWG 12 AWG 10 AWG 12 AWG 104/0.26 65/0.26 104/0.26 65/0.26 7.54 DF60-1012PCFA(07) 680-3024-2 07 32.7 27.2 UL1015 4 to 5.2 DF60-1012PCA(07) 680-3049-3 07 32.7 27.2 UL1015 4.69 4.04 Reel 700 Loose 100 Reel 900 Loose 100 Note : The applicable wires are tin-plated and annealed. Note : Please contact our Sales Department when using wires other than those listed. BApplicable crimping tool Item Applicator Part No. HRS No. AP105-DF60-8 901-4623-5 QHS895700H-UP − AP105-DF60-1012 901-4624-8 QHS888000K-UP − HT306/DF60-8 Hand tool HT306/DF60-1012 Applrcable contact Remarks DF60-8SCFA(##)/PCFA(##) DF60A-8PCFA (Note 4) manufaftured by Japan Automatic Machine Co., Ltd. DF60-1012SCFA(##)/ PCFA(##) (Note 4) manufaftured by Japan Automatic Machine Co., Ltd. DF60-8SCA/PCA 550-0301-4 *Exclusive for UL1283 8AWG DF60-1012SCA/PCA 550-0307-0 *Exclusive for UL1015 10 to 12AWG Note 1 : Please use a press that generates 3 tons. Note 2 : Please contact our Sales Department when you are using crimp tools made by other manufacturers. Note 3 : Please do the crimping operations according to the "Crimping work standards" and "Crimping condition table". Note 4 : Please contact Japan Automatic Machine Co., Ltd. (hereinafter J.A.M.) through their website regarding crimping issues when using applicators manufactured by J.A.M. URL http://www.jam-net.co.jp 8 DF60 Series●65A 10.16mm pitch Wire-to-Board Connectors for Internal Power Supply(UL, C-UL, TÜV certified product) BRemoving Contacts ●Contact extraction tool: precision screwdriver (flathead screwdriver with 1.4mm in width across flats) ●For Crimp contacts: DF60-8SC(F)A, DF60-1012SC(F)A, DF60-8PC(F)A, DF60-1012PC(F)A ●Procedure Sectioned drawing of the housing BdaYZYaVcXZ Jan.1.2017 Copyright 2017 HIROSE ELECTRIC CO., LTD. All Rights Reserved. Precision screwdriver 1. After unmating the parts, position the screwdriver to raise the lance as shown in the illustration. Before attempting to remove any contacts, make sure that the power is switched off and the system is de-energized. 2. T h e l a n c e n e e d s t o b e raised sufficiently to allow the terminated wire to slip past it. The lance needs to be held up while at the same time pulling on the wire. Due to any previous repairs, the strength of the lance could have been compromised. Hirose recommends the use of a new crimp housing to assure proper performance. Caution Please be very careful when removing the contact work so that you don’t become injured by the protruding part of the crimp contact. BPrecautions for use 1. The connector could be damaged if it is pulled out forcibly. When it is hard to pull out, push it in slightly first and then depress the lock and un- mate. 2. When thick, short sections of wire are used, the connector could be deformed due to the force of the wires’ position. Route cables in such a way that they do not twist when being installed. 3. Make sure to turn off the power when mating or un-mating the connector. 4. Please do not touch any area around the contact part with your hand when the power is on; it could be very dangerous. 5. Please contact our Sales Department about the assembly procedure and the instruction manual. BRated values Please avoid using the device above the rated values. Also, do not insert or pull out energized or “ live” wires. BOperating environment Please contact us if you are designing this connector into environmental conditions where high and low temperatures are repeated. 9 DF60 Series●65A 10.16mm pitch Wire-to-Board Connectors for Internal Power Supply(UL, C-UL, TÜV certified product) BMated dimensions ● Wire-to-Board Connection using the straight pin header (18) Jan.1.2017 Copyright 2017 HIROSE ELECTRIC CO., LTD. All Rights Reserved. (30) DF60-*S-10.16C DF60-*P-10.16DSA(27) ● Wire-to-Board Connection using the right angle pin header. 㸦18.8㸧 㸦33.5㸧 DF60-*S-10.16C DF60-*P-10.16DS(27) ● In-line or Wire-to-Wire Connection （47.1） （18） DF60-*EP-10.16C DF60-*S-10.16C BUsage example of sequential contacts 1 3 4 2 3 DF60-****PCFA(##) 10 DF60-****PCFA(##) Standard contact as a connect-sensing pin. 4 2 1 DF60A-8PCFA Sequential contact as a ground pin. DF60A-8PCFA DF60 Series●65A 10.16mm pitch Wire-to-Board Connectors for Internal Power Supply(UL, C-UL, TÜV certified product) BPrecautionary notes Jan.1.2017 Copyright 2017 HIROSE ELECTRIC CO., LTD. All Rights Reserved. 1.Recommended soldering conditions ■ Soldering profile when using an automatic soldering device Soldering temperature: 260℃ ; Soldering time: no more than 10 seconds ■ Hand soldering conditions Temperature of soldering iron: 350±10℃ , soldering time: no more than 3 seconds 2. Cleaning Conditions Please refer to the "Wire-to-Board Connector Guide". Cleaning with IPA is allowed. (Other cleaning agents are not recommended due to the fact that it may change the push/pull feeling. Please contact us when you use other cleaning agents. ) 3. Wiring condition Please refer to the "Wire-to-Board Connector Guide" and "DF60 Harness procedure". 4. Important notes ■ Caution is required for mating and un-mating the connector without it being mounting on a PCB. Doing so can damage or deform the contacts. ■ During hand soldering, do not apply excess amounts flux which can migrate on to the connector. ■ This product may have a slight differences in color depending on the production lot. This difference does not have any influence on the performance. ■ Please refer to "DF60 Harness procedure" for the handling precautions during mating and un-mating operations. 5. Handling instructions Please refer to the "Wire-to-Board Connector Guide”. 6. Right angle pin header Precautions for use Since the lead mounting part has some exposed parts, please insure sufficient clearance when mounting other parts near this connector. Lead part 7. In-line connector Panel fixing operation ① Insert a M3 nut from the lateral direction. ②Push the nut in the direction of the arrow. ③Nut insertion is then complete. ④Panel mounting is completed by installing a connector on the panel cutout hole and tightening wit a M3 screw. Torque value is 49N·cm max. 11 Jan.1.2017 Copyright 2017 HIROSE ELECTRIC CO., LTD. All Rights Reserved. DF60 Series●65A 10.16mm pitch Wire-to-Board Connectors for Internal Power Supply(UL, C-UL, TÜV certified product) Powered by TCPDF (www.tcpdf.org) USA: HIROSE ELECTRIC (U.S.A.), INC. HEADQUARTERS CHICAGO OFFICE 2300 Warrenville Road, Suite 150, Downers Grove, IL 60515 Phone : +1-630-282-6700 http://www.hirose.com/us/ USA: HIROSE ELECTRIC (U.S.A.), INC. SAN JOSE OFFICE 2841 Junction Ave, Suite 200 San Jose, CA. 95134 Phone : +1-408-253-9640 Fax : +1-408-253-9641 http://www.hirose.com/us/ USA: HIROSE ELECTRIC (U.S.A.), INC. DETROIT OFFICE (AUTOMOTIVE) 17197 N. Laurel Park Drive, Suite 253, Livonia, MI 48152 Phone : +1-734-542-9963 Fax : +1-734-542-9964 http://www.hirose.com/us/ THE NETHERLANDS: HIROSE ELECTRIC EUROPE B.V. Hogehillweg #8 1101 CC Amsterdam Z-O Phone : +31-20-6557460 Fax : +31-20-6557469 http://www.hirose.com/eu/ GERMANY: HIROSE ELECTRIC EUROPE B.V. GERMAN BRANCH Schoenbergstr. 20, 73760 ostfildern Phone : +49-711-456002-1 Fax : +49-711-456002-299 http://www.hirose.com/eu/ GERMANY: HIROSE ELECTRIC EUROPE B.V. NUREMBERG OFFICE Neumeyerstrasse 22-26, 90411 Nurnberg Phone : +49-911 32 68 89 63 Fax : +49-911 32 68 89 69 http://www.hirose.com/eu/ GERMANY: HIROSE ELECTRIC EUROPE B.V. HANOVER OFFICE Bayernstr. 3, Haus C 30855 Langenhagen, Germany Phone : +49-511 97 82 61 30 Fax : +49-511 97 82 61 35 http://www.hirose.com/eu/ FRANCE: HIROSE ELECTRIC EUROPE B.V. PARIS OFFICE Regus La Garenne Colombes,Place de La Belgique, 71 Boulevard National La Garenne Colombes, 92250, France Phone : +33 (0) 1 7082 3170 Fax : +33 (1) 7082 3101 http://www.hirose.com/eu/ UNITED KINGDOM: HIROSE ELECTRIC EUROPE BV (UK BRANCH) 4 Newton Court, Kelvin Drive, Knowlhill, Milton Keynes, MK5 8NH Phone : +44-1908 202050 Fax : +44-1908 202058 http://www.hirose.com/eu/ CHINA: HIROSE ELECTRIC (SHANGHAI) CO., LTD. 1601, Henderson Metropolitan, NO.300, East Nanjing Road, Huangpu District, Shanghai, China 200001 Phone : +86-21-6391-3355 Fax : +86-21-6391-3335 http://www.hirose.com/cn/ CHINA: HIROSE ELECTRIC (SHANGHAI) CO.,LTD. BEIJING BRANCH A1001, Ocean International Center, Building 56# East 4th Ring Middle Road, ChaoYang District, Beijing, 100025 Phone : +86-10-5165-9332 Fax : +86-10-5908-1381 http://www.hirose.com/cn/ CHINA: HIROSE ELECTRIC TECHNOLOGIES (SHENZHEN) CO., LTD. Room 09-13, 19/F, Office Tower Shun Hing Square, Di Wang Commercial Centre, 5002 Shen Nan Dong Road, Shenzhen City, Guangdong Province, 518008 Phone : +86-755-8207-0851 Fax : +86-755-8207-0873 http://www.hirose.com/cn/ HONG KONG: HIROSE ELECTRIC HONGKONG TRADING CO., LTD. Room 1001, West Wing, Tsim Sha Tsui Centre, 66 Mody Road, Tsim Sha Tsui East, Kowloon, Hong Kong Phone : +852-2803-5338 Fax : +852-2591-6560 http://www.hirose.com/hk/ TAIWAN: HIROSE ELECTRIC TAIWAN CO., LTD. 103 8F, No.87, Zhengzhou Rd., Taipei Phone : +886-2-2555-7377 Fax : +886-2-2555-7350 http://www.hirose.com/tw/ KOREA: HIROSE KOREA CO.,LTD. 250, Huimanggongwon-ro, Siheung-si, Gyeonggi-do, Korea, 15083 Phone : +82-31-496-7000 or 7124 Fax : +82-31-496-7100 http://www.hirose.co.kr/ SINGAPORE: INDIA: HIROSE ELECTRIC SINGAPORE PTE. LTD. DELHI LIAISON OFFICE HIROSE ELECTRIC SINGAPORE PTE. LTD. 10 Anson Road #26-16, International Plaza Office NO.552, Regus-Green Boulevard, Level5, Tower C, Sec62, Plot B-9A, Block B, Noida, 201301, Uttar Pradesh, India 079903, Singapore Phone : +91-12-660-8018 Phone : +65-6324-6113 Fax : +91-120-4804949 Fax : +65-6324-6123 http://www.hirose.com/sg/ http://www.hirose.com/sg/ MALAYSIA: PENANG REPRESENTATIVE OFFICE 1-21-01, Suntech @ Penang Cybercity (1164), Lintang Mayang Pasir 3,11950, Bayan Baru, Penang, Malaysia. Phone : +604-619-2564 Fax : +604-619-2574 http://www.hirose.com/sg/ ® 12 INDIA: HIROSE ELECTRIC SINGAPORE PTE. LTD. BANGALORE LIAISON OFFICE Unit No-403, 4th Floor, No-84, Barton Centre, Mahatma Gandhi (MG) Road, Bangalore 560 001, Karnataka, India Phone : +91-80-4120 1907 Fax : +91-80-4120 9908 http://www.hirose.com/sg/ THAILAND: BANGKOK OFFICE (REPRESENTATIVE OFFICE) Unit 4703, 47th FL., 1 Empire Tower, South Sathorn Road, Yannawa, Sathorn, Bangkok 10120 Thailand Phone : +66-2-686-1255 Fax : +66-2-686-3433 http://www.hirose.com/sg/ 2-6-3,Nakagawa Chuoh,Tsuzuki-Ku,Yokohama-Shi 224-8540,JAPAN TEL: +81-45-620-3526 Fax: +81-45-591-3726 http://www.hirose.com http://www.hirose-connectors.com The characteristics and the specifications contained herein are for reference purpose. Please refer to the latest customer drawings prior to use. The contents of this catalog are current as of date of 01/2017. Contents are subject to change without notice for the purpose of improvements.