PRODUCT DATASHEET HighBay series last update 29/5/2017 DETAILS Product Number CS14130_HB-IP-2X6-W Family HighBay Type Assembly Color white Diameter 173 + 71,4 mm Height 11,4 mm Style rectang Optic Material PMMA Holder Material Fastening pin, screw Status production ready ROHS Comliant Yes Date Updated 29/05/2017 OPTICAL PROPERTIES Viewing Light Effi- LED Angle Beam ciency cd/lm Connector XT-E 58 deg Wide 94 % 0.870 - XM-L sim: 57 Wide sim: 93 % - - XM-L2 61 deg Wide 94 % 0.800 - XP-G2 58 deg Wide 93 % 0.870 - XB-D sim: 52 Wide sim: 90 % - - XP-G 60 deg Wide 94 % 0.840 - XP-L 67 deg Wide 94 % 0.750 - XP-E2 sim: 56 Wide sim: 94 % - XHP35 HD sim: 60 Wide sim: 94 % sim: 0.930 - XHP35 HI sim: 57 Wide sim: 94 % sim: 0.980 - XP-G3 59 deg Wide 94 % MHB-A/B sim: 60 Wide sim: 91 % sim: 0.860 - XP-L2 62 deg Wide 94 % H35C1 (LEMWA33) sim: 59 Wide sim: 94 % sim: 0.960 - LUXEON Rebel sim: 50 Wide sim: 93 % - - LUXEON T 60 deg Wide 94 % 0.860 - LUXEON Rebel ES 57 deg Wide 94 % 0.860 - LUXEON R 58 deg Wide 94 % 0.900 - LUXEON Z ES 52 deg Wide 94 % 1.000 - LUXEON TX 54 deg Wide 94 % 0.960 - LUXEON XR-TX (L2T0-xxyy012M) 60 deg Wide 94 % 0.900 - NVSxx19B/NVSxx19C 58 deg Wide 94 % 0.870 - NF2x757A sim: 50 Wide sim: 93 % - - NVSxE21A 51 deg Wide 94 % - Oslon Square PC sim: 56 Wide sim: 93 % - 0.840 0.770 1.140 - - - - June 12th 2017 3:40 Copyright Ledil Oy - Subject to change without prior notice - Page 1/2 Ledil Oy Salorankatu 10 24240 SALO, Finland http://www.ledil.com email: [email protected] FAX: +358-2-733 8001 PRODUCT DATASHEET HighBay series last update 29/5/2017 OPTICAL PROPERTIES Viewing Light Effi- LED Angle Beam ciency Oslon Square EC sim: 56 Wide sim: 93 % - Duris S8 sim: 56 Wide sim: 95 % sim: 1.140 - Oslon SSL 80 sim: 52 Wide sim: 94 % sim: 1.200 - Oslon Square Gen3 sim: 56 Wide sim: 94 % 1.080 - Fortimo FastFlex LED board 2x6 DP G4 58 deg Wide 93 % 0.870 - Fortimo FastFlex LED board 2x6 DPX G459 deg Wide 94 % 0.840 - Z5M1/Z5M2 59 deg Wide 94 % 0.870 - Acrich MJT 4040 sim: 52 Wide sim: 93 % sim: 1.200 - Z5M sim: 50 Wide sim: 94 % sim: 1.000 - Z8Y22P 57 deg Wide 94 % TL1L3 sim: 54 Wide sim: 89 % - TL1L2 sim: 55 Wide sim: 94 % sim: 0.980 - TL1L4 56 deg Wide 94 % cd/lm 0.880 0.950 Connector - - - June 12th 2017 3:40 Copyright Ledil Oy - Subject to change without prior notice - Page 2/2 Ledil Oy Salorankatu 10 24240 SALO, Finland http://www.ledil.com email: [email protected] FAX: +358-2-733 8001 2 3.2 3.2 1.65 5.4 Fasten middle screws first. Recommended torque with pan head screw: 0.57Nm (for 1.6mm thick PCB, no thermal pad) 3.5 71.4 C G 3 5.4 Silicone seal is tested to work in LEDiL test assemblies. Customer is recommended to test the sealing in the end product due many variables, such as heat sink surface and possible chemical traces 9.9 INDEX PART NO DESCRIPTION 1 CS14130 Tolerances if not otherwise shown According to DIN ISO 2768-1 Linear measures: Up to 30mm class M, otherwise class C. According to DIN ISO 2768-2 Form and position: class L This drawing is the property of LEDiL Oy. It may not be reproduced, copied or communicated without a written agreement with LEDiL Oy." HB-IP-2x6-W MATERIAL COLOUR PMMA 8N, Silicone seal Ledil Oy Salorankatu 10 FIN 24240 SALO Finland DRAWING TITLE CS14130_HB-IP-2x6-W SIZE 1 PART NUMBER A3 SCALE H 6 Section view D-D Scale: 2:1 Section view C-C Scale: 1:1 THIRD ANGLE PROJECTION: 173 M3 screw size 2 D 1 C 3.5 1.6 (1.6mm pcb) Ribs D 4 54.2 11.4 54.2 hole (rib) pos pin 54.2 1.7 Wiring: PCB is fully sealed between the lens with silicone seal and the heatsink. Wiring needs to be done trough the PCB and heat sink to maintain high IP rating. 2.65 50.8 Detail A Scale: 2:1 Detail B Scale: 2:1 3.2 (silicone) 3 Led position B pcb typically 45mm A ( 44.9 ) 61 25.4 4 25.4 PCB typically 146,6mm A B C D E F G H ( 146.5 ) CS14130 1:1 WEIGHT SHEET B A 1/1 NOTE: The typical divergence will be changed by different color, chip size and chip position tolerance. The typical total divergence is the full angle measured where the luminous intensity is half of the peak value.