Aluminum Electrolytic Capacitors/TP Surface Mount Type Series: TP TP Type: V High temperature Lead-Free reflow(suffix:A✽) ■ Features ● ● ● ● ● ● Lower ESR at Low temperature after endurance Endurance: 3000 h at 125 °C(D8 size : 2000 h) Automotive Vibration-proof product is available upon request. (08 mm and larger) AEC-Q200 qualified ✽ RoHS directive compliant ■ Specifications Category Temp. Range Rated W.V.Range Nominal Cap.Range Capacitance Tolerance DC Leakage Current tan d –40 °C to +125 °C 10 V.DC to 35 V.DC 47 μF to 470 μF ±20 % (120 Hz/+20 °C) I < 0.01 CV (μA) After 2 minutes Please see the attached standard products list After the life test with DC rated working voltage at +125 °C±2 °C for 3000 hours(D8 size : 2000 h). the capacitors shall meet the limits specified below. Capacitance change tan d DC leakage current Endurance ESR after Endurance (Ω/100kHz) ±30 % of initial measured value < 300 % of initial specified value < initial specified value D8 0.45 40 Initial(+20 °C) After 2000 h(-40 °C) Size Code F 0.2 4.5 G 0.15 3.5 Shelf Life After storage for 1000 hours at +125 °C±2 °C with no voltage applied and then being stabilized at +20 °C, capacitors shall meet the limits specified in Endurance (With voltage treatment) Resistance to Soldering Heat After reflow soldering and then being stabilized at +20 °C, capacitors shall meet the following limits. Capacitance change ±10 % of initial measured value tan d < initial specified value DC leakage current < initial specified value ■ Frequency correction factor for ripple current Frequency (Hz) Correction factor ■ Marking 120 0.65 1k 0.85 10 k 0.95 100 k to 1.00 ■ Dimensions in mm (not to scale) Series identification Mark for Lead-Free Products Black Dot (Square) Rated voltage Mark L Pressure Relief (010 and larger) + (I) A±0.2 (P) H 0D±0.5 Capacitance (μF) " 51 – W (I) 0.3 max. Negative polarity marking (–) K Marking color : BLACK B±0.2 Example:10 V 220 μF (Unit : mm) ( ) Reference size Lot number Rated Voltage Mark A 10 V C 16 V E 25 V V 35 V Size L A, B H I W P K code D D8 6.3 7.7±0.3 6.6 7.8 max. 2.6 0.65±0.1 1.8 0.35 +- 0.15 0.20 F 8.0 10.2±0.3 8.3 10.0max. 3.4 0.90±0.2 3.1 0.70±0.20 G 10.0 10.2±0.3 10.3 12.0max. 3.5 0.90±0.2 4.6 0.70±0.20 ✽ This product qualify for AEC-Q200, but it has some deviations. Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. 01 Mar. 2014 – EEE-57 – Aluminum Electrolytic Capacitors/TP ■ Standard Products Endurance : 125 °C 3000 h (f6.3×7.7 < : 2000 h) Case size W.V. (V) 10 Cap. (±20 %) (μF) 220 330 470 100 16 25 (mm) 8 Ripple ESR tan d Part No. ✽Size Current (100 kHz) (RoHS:compliant) Length (120 Hz) Code (100 kHz) (Ω) (+20 °C) (+125 °C) (mm) (mA r.m.s.) +20 °C -40 °C 10.2 F 270 0.20 3 0.30 EEETP1A221AP Reflow Taping (8) (pcs) 500 8 10.2 (F) 270 0.20 3 0.30 EEETPA331UAP (8) 500 10 10.2 G 500 0.15 2 0.30 EEETP1A331AP (8) 500 10 10.2 G 500 0.15 2 0.30 EEETP1A471AP (8) 500 7.7 D8 197 0.45 5 0.23 EEETPC101XAP (8) 900 F 270 0.20 3 0.23 EEETP1C101AP (8) 500 6.3 8 10.2 220 8 10.2 F 270 0.20 3 0.23 EEETP1C221AP (8) 500 330 10 10.2 G 500 0.15 2 0.23 EEETP1C331AP (8) 500 470 10 10.2 G 500 0.15 2 0.23 EEETP1C471AP (8) 500 100 8 10.2 F 270 0.20 3 0.18 EEETP1E101AP (8) 500 220 10 10.2 G 500 0.15 2 0.18 EEETP1E221AP (8) 500 330 10 10.2 G 500 0.15 2 0.18 EEETP1E331AP (8) 500 7.7 D8 197 0.45 5 0.16 EEETPV470XAP (8) 900 500 47 35 Dia. Min. Packaging Q'ty Specification 6.3 8 10.2 F 270 0.20 3 0.16 EEETP1V470AP (8) 100 8 10.2 F 270 0.20 3 0.16 EEETP1V101AP (8) 500 220 10 10.2 G 500 0.15 2 0.16 EEETP1V221AP (8) 500 ✽ Size code( ):Miniaturization product If Part number exceeds 12 digits, voltage code is abbreviated as follows; 1A→A, 1C→C, 1E→E, 1V→V · Please refer to the page of “Reflow Profile” and “The Taping Dimensions”. · When requesting vibration-proof product, please put the last “V” instead to “P” Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. 01 Mar. 2014 – EEE-58 –