SURFACE MOUNT ELECTROLYTIC NON POLARISED DVCNP Non Polarised SMT Electrolytic 85°C SECTION 1 Designed for Automatic Insertion and Reflow Soldering 5.5mm High SPECIFICATION Rated Voltage Range 6.3 ~ 50Vdc Rated Capacitance Range 0.1 ~ 47µF -40° ~+85°C Operating Temperature Range Capacitance Tolerance ±20% (M) Maximum Leakage Current 0.05CV, or 10µA, After 2 minutes At 20°C whichever is greater W.V. (Vdc) 6.3 10 16 25 35 Tan∂ @ 120Hz/20°C 0.3 0.25 0.2 0.15 0.15 W.V. (Vdc) 6.3 10 16 25 35 50 Stability Z-25°C/Z +20°C 3 3 2 2 2 2 Impedance Ratio @ 120Hz Z-40°C/Z +20°C 8 5 4 3 3 3 Max. Tan∂ @ 120 Hz/20°C Low Temperature. Load Life Test Capacitance Change 85°C, 1,000 Hours Less than 200% of specified value Leakage Current Less than specified value RANGE & CASE SIZES COEFFICIENT OF FREQ FOR RATED RIPPLE Part No. Frequency (Hz)/Rated Voltage 50-60 120 1k 10k - 100k 0.8 1 1.15 1.25 6.3 to 16 0.15 Within ±20% of initial measured value Tan∂ (Reverse polarity every 250 hours) 50 W.V (V.DC) Cap (uF) ESR (120Hz/+20C) max Ripple Current (120Hz/+105C) (mA) rms max Size dia/height DVCNP226.3-LF 6.3 22 23 27 5X5.5 25 to 35 0.8 1 1.25 1.40 DVCNP336.3-LF 6.3 33 15 45 6.3X5.5 50 0.8 1 1.35 1.50 DVCNP476.3-LF 6.3 47 11 54 6.3X5.5 OUTLINE DRAWING ØD L A B I W P 4 5.3 +/- 0.2 4.3 4.3 2.0 0.5 to 0.8 1.0 5 5.3 +/- 0.2 5.3 5.3 2.3 0.5 to 0.8 1.5 6.3 5.3 +/- 0.2 6.6 6.6 2.7 0.5 to 0.8 2.0 0.3 Max W I P Dø B I A L ORDERING INFORMATION DVCNP 4.7 35 LF Series Capacitance Voltage Lead Free DVCNP1010-LF 10 10 50 18 4X5.5 DVCNP2210-LF 10 22 19 40 6.3X5.5 DVCNP3310-LF 10 33 13 50 6.3X5.5 4X5.5 DVCNP4.716-LF 16 4.7 88 14 DVCNP1016-LF 16 10 33 26 5X5.5 DVCNP2216-LF 16 22 15 45 6.3X5.5 6.3X5.5 DVCNP3316-LF 16 33 10 55 DVCNP3.325-LF 25 3.3 101 13 4X5.5 DVCNP4.725-LF 25 4.7 53 20 5X5.5 DVCNP1025-LF 25 10 25 35 6.3X5.5 DVCNP2.235-LF 35 2.2 151 10 4X5.5 DVCNP3.335-LF 35 3.3 75 17 5X5.5 DVCNP4.735-LF 35 4.7 53 21 5X5.5 DVCNP1035-LF 35 10 25 35 6.3X5.5 4X5.5 DVCNP0.150-LF 50 0.1 3320 2.3 DVCNP0.2250-LF 50 0.22 1510 3.3 4X5.5 DVCNP0.3350-LF 50 0.33 1010 4.1 4X5.5 DVCNP0.4750-LF 50 0.47 706 4.9 4X5.5 DVCNP150-LF 50 1 332 7.2 4X5.5 DVCNP2.250-LF 50 2.2 113 14 5X5.5 DVCNP3.350-LF 50 3.3 75 17 5X5.5 DVCNP4.750-LF 50 4.7 53 24 6.3X5.5 78 www.dubilier.co.uk