Vishay ET20-104 Dc filter capacitor Datasheet

ET
Vishay ESTA
DC Filter Capacitors
RIPPLE
The sum of the peak ripple voltage and the DC voltage
should not exceed the rated voltage. Refer to graph fig.1 for
permissible peak-to-peak ripple voltage as a percentage of
rated voltage for various frequencies.
% RIPPLE
30
20
10
0
10
100
1000
10 000
Hz
Fig. 1
POWER FACTOR
TYPE ET
These capacitors are manufactured using a mixed dielectric
material that consists of polyester/polypropylene film and
capacitor tissue. They are impregnated and filled with a
mineral oil. The container is a Synthetic Resin Bonded Paper
tube sealed at both ends with resin assuring hermetic
sealing. The capacitors are terminated with M5 *12 mm
studs or tinned copper wire.
The power factor is variable, and is a function of temperature
and frequency see fig. 2. Nominal value < 0.5 % at 20 °C
at 20 °C
2%
Power Factor
vs.
Temperature
1 kHz
1%
Note
• The impregnant used is a non toxic highly refined, purified and
inhibited mineral oil.
50 Hz
0%
- 20
40
65 80
Fig. 2
DIELECTRIC RESISTANCE
APPLICATIONS
The ET range is specifically designed for high voltage filters
and can be successfully used in the following
applications:
(Parallel resistance) is indicated by the graph of insulance
(MΩ x μF) vs temperature fig. 3. The insulance (MÉ1 x μF) is
nominally 10 000 s at + 20 °C. (Measurements taken after
1 minute with an applied voltage of 500 V)
MΩ x MF
• By-pass
• Coupling
• Filter applications
• X-ray power supplies
105
104
103
• Electrostatic air deaners
102
Insulance vs. Temperature
Typical Values
- 40
TEMPERATURE RANGE
0
40
80
Fig. 3
TEMPERATURE COEFFICIENT
Capacitance will increase by 2 % per 100 °C temperature
rise.
CAPACITANCE RANGE
LIFE EXPECTANCY
ET type capacitors are designed for a life exceptancy of
5000 h at 65 °C. To achieve the same life expectancy at
85 °C derate to 60 % of rated voltage fig. 4.
Hours
Temperature range is - 55 °C to + 85 °C. Derating is
required for operation at higher temperatures.
105
104
0.0005 μF to 2 μF. The tolerance is ± 10 %. Other tolerances
are available on request. Nominal values measured at 1 kHz.
103
VOLTAGE RANGE
102
1000 VDC to 70 000 VDC
Document Number: 13014
Revision: 11-Aug-10
0
50
100
150 °C
Rated Voltage
Fig. 4
For technical questions, contact: [email protected]
www.vishay.com
1
ET
DC Filter Capacitors
Vishay ESTA
TEST VOLTAGE
TYPE DESCRIPTION
Terminal/terminal (Vt/t)
CAP.
[μF]
L
[mm]
D
[mm]
ET10-103
0.01 (1)
42
17
ET10-203
0.02 (1)
42
17
ET10-503
0.05
48
17
WEIGHT
ET10-254
0.25
60
22
The approximate weight in grams may be calculated by
multiplying the volume of the capacitor container by
1.2 x 10-3.
ET10-504
0.5
70
30
ET10-205
2.0
110
35
17
For DC rating < 20 kV
PART NUMBER
Vt/t = 2.0 x rated voltage 60 s
1000 VDC WKG
For DC rating > 20 kV
Vt/t = 1.5 x rated voltage 60 s
1500 VDC WKG
TERMINATIONS
ET15-103
0.01 (1)
42
ET15-203
0.02 (1)
42
20
Add suffix W to part No. To indicate wire terminations.
ET15-254
0.25
60
30
ET15-504
0.5
110
25
ET15-105
1.0
110
35
Capacitance tolerance of 20 % is standard with those
marked.
ET15-205
2.0
110
42
DIMENSIONS in millimeters
ET20-103
0.01 (1)
48
17
ET20-503
0.05
60
17
CAPACITANCE
L
12
D
12
2000 VDC WKG
ET20-104
0.1
60
22
ET20-254
0.25
60
30
ET20-504
0.5
75
35
ET30-502
0.005 (1)
42
17
ET30-103
0.01 (1)
42
20
ET30-203
0.02
48
20
ET30-503
0.05
55
25
ET30-104
0.1
55
30
ET30-254
0.25
60
35
3000 VDC WKG
5
ET30-504
0.5
75
42
ET30-105
1.0
110
42
17
4000 VDC WKG
ET40-102
0.001 (1)
42
ET40-502
0.005 (1)
42
17
ET40-503
0.05
60
22
ET40-103
0.01
42
20
ET40-104
0.1
60
30
ET40-504
0.5
95
42
5000 VDC WKG
ET50-102
0.001 (1)
42
17
ET50-202
0.002 (1)
42
17
ET50-502
0.005 (1)
42
20
ET50-103
0.01
48
20
ET50-203
0.02
48
22
ET50-503
0.05
60
25
ET50-104
0.1
75
30
ET50-254
0.25
95
35
ET50-504
0.5
110
42
Notes
(1) Capacitance tolerance of 20 % is standard
• Non standard size containers can be supplied on request
www.vishay.com
2
For technical questions, contact: [email protected]
Document Number: 13014
Revision: 11-Aug-10
ET
DC Filter Capacitors
TYPE DESCRIPTION
TYPE DESCRIPTION
CAP.
[μF]
L
[mm]
D
[mm]
6000 VDC WKG
ET60-102
0.001 (1)
55
17
ET60-202
0.002 (1)
55
17
ET60-502
0.005 (1)
65
ET60-103
0.01
ET60-203
0.02
ET60-503
ET60-104
ET60-254
8000 VDC WKG
ET80-502
PART NUMBER
CAP.
[μF]
L
[mm]
D
[mm]
ET250-501
0.0005 (1)
145
17
ET250-102
0.001 (1)
145
20
17
ET250-502
0.005
175
30
65
20
ET250-103
0.010
175
35
80
20
ET250-503
0.05
300
42
0.05
100
25
30 000 VDC WKG
0.10
100
35
ET300-501
170
17
0.25
135
42
PART NUMBER
25 000 VDC WKG
ET300-102
170
20
170
25
ET300-502
0.005
205
30
ET300-103
0.010
205
35
ET300-203
0.02
280
35
0.03
280
42
ET400-102
0.001 (1)
210
20
ET400-202
0.002
275
20
ET400-103
0.010
275
42
ET500-501
0.0005 (1)
275
22
ET500-102
0.001 (1)
275
22
ET500-202
0.002
340
22
ET500-502
0.005
340
35
ET500-103
0.010
340
42
65
20
0.01
80
20
ET80-503
0.05
105
35
ET80-104
0.10
105
42
ET300-303
ET80-254
10 000 VDC WKG
ET100-102
0.25
170
42
40 000 VDC WKG
0.001 (1)
65
17
ET100-502
0.005 (1)
65
22
ET100-103
0.01
80
22
ET100-203
0.02
80
30
ET100-503
0.05
105
35
ET100-104
0.10
170
35
ET100-254
12 000 VDC WKG
ET120-202
0.25
205
42
0.002 (1)
95
20
ET120-502
0.005 (1)
95
30
ET120-103
0.01
115
30
0.02
115
35
ET120-503
0.05
180
35
ET120-104
15 000 VDC WKG
ET150-102
0.10
180
42
0.001 (1)
95
17
ET150-202
0.002 (1)
95
20
ET150-502
0.005 (1)
110
20
ET150-103
0.01
110
30
ET150-203
0.02
110
35
ET150-503
0.05
150
42
ET150-104
20 000 VDC WKG
0.10
245
42
ET200-102
0.001 (1)
115
22
ET200-502
0.005 (1)
145
25
ET200-103
0.01
145
30
ET200-203
0.02
195
30
ET200-503
0.05
245
42
ET200-104
0.10
320
42
0.001
(1)
0.002
ET80-103
ET120-203
0.0005 (1)
ET300-202
0.005 (1)
Document Number: 13014
Revision: 11-Aug-10
Vishay ESTA
50 000 VDC WKG
60 000 VDC WKG
ET600-102
0.001 (1)
330
25
ET600-152
0.0015
330
30
Notes
(1) Capacitance tolerance of 20 % is standard
• Non standard size containers can be supplied on request
For technical questions, contact: [email protected]
www.vishay.com
3
Legal Disclaimer Notice
Vishay
Disclaimer
ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE
RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE.
Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively,
“Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other
disclosure relating to any product.
Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or
the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all
liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special,
consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular
purpose, non-infringement and merchantability.
Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical
requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements
about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular
product with the properties described in the product specification is suitable for use in a particular application. Parameters
provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All
operating parameters, including typical parameters, must be validated for each customer application by the customer’s
technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase,
including but not limited to the warranty expressed therein.
Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining
applications or for any other application in which the failure of the Vishay product could result in personal injury or death.
Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk and agree
to fully indemnify and hold Vishay and its distributors harmless from and against any and all claims, liabilities, expenses and
damages arising or resulting in connection with such use or sale, including attorneys fees, even if such claim alleges that Vishay
or its distributor was negligent regarding the design or manufacture of the part. Please contact authorized Vishay personnel to
obtain written terms and conditions regarding products designed for such applications.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by
any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners.
Document Number: 91000
Revision: 11-Mar-11
www.vishay.com
1
Similar pages